Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹47.9 L+₹9.9 L (26.0%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹43.8 L
EMD Value
₹87,500
Closing Date
19 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
PROVN OF GUARD ROOM WITH TOILET FACILITIES AND CERTAIN SANCTIONED WORKS AT ITARANA CANTT ALWAR
2023_MES_616370_2
8197/E8
Open Tender
Civil Works
Item Rate
180 days
GE Alwar
As per NIT
3 documents required · 3 mandatory
₹500
GE Alwar
₹87,500
Yes
23 Apr 2024
29 Sept 2023
21 Oct 2023
29 Sept 2023
19 Oct 2023
4 Oct 2023
29 Sept 2023 - 3 Oct 2023
Amount
Excavation in trenches not exceeding 1.50m wide and not exc 1.50m in depth and getting out in soft / loose soil complete all as specified & directed.
All as per item No 1.00 here in above but depth exc 1.5m but n.exc 3m complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & directed.
Removing surplus excavated soil to a distance exc 50 metre and n.exc 100 metre and depositing where directed at a level n.exc 1.5 m above the stafrting point complete all as specified & directed.
M&L PCC (1:4:8) type D-2, using 40 mm graded stone aggregate in fdn filling and mass mass concrete complete all as specified & directed.
M&L RCC work M-25 Design Mix (using 20mm graded crushed stone aggregate) as in foundation including, raft, plinth beam bases for column etc basement slabs under ramed piles and mass concrete complete all as specified & directed.
M&L RCC work M-25 Design mix (using 20mm graded crushed stone aggregate) as in columns, pillars, piers posts and struts complete all as specified & directed.
M&L RCC work M-25 design Mix (using 20mm graded crushed stone aggregate) as in beams, cantilevers bressumers, lintel over 1.5 mtr span complete all as specified & directed.
M&L RCC work M-25 design mix (using 20mm graded crushed stone aggregate) as in slab supported in walls cantilevers etc complete all as specified & directed.
M&L RCC work M-25 design mix (using 20mm graded crushed stone aggregate) as INchajjas complete all as specified & directed.
M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
All as per ser item No 11.00 above but 5mm to 10mm dia as in stirrups, spacers binders etc.
M&L form work to side of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified & directed.
M&L form work to side of pillar posts struts piers columns etc complete all as specified & directed.
M&L form work to sides and soffits of floor or roof beam , beam nauching, griders, bressummers lintels cantilevers, shelves including supprots, overhangs etc also splays between floors and beams etc complete all as specified & directed.
M&L form work as in suspended slab, such as roof slabs, floor slabs, landings and similar work, not exceeding 20mm thick (horizonal or sloping) complete all as specified & directed.
M&L form work to cullaah hoods, chajjas, throughs and similar items including edges complete all as specified & directed.
Treating the bottom and side of exc at the rate 5 ltr/sqm emulsion of surface area complete all as specified & directed.
Treating the backfil in contact with foundation at the rate of 7.5ltr/sqm emulsion of surface area complete all as specified & directed.
Treating the bottom surface of floor at the rate 5 ltr/sqm emulsion of surface area complete all as specified & directed.
Treating the under plinth protection at the frate of 5 Ltr/ Sqm emulsiom of surface area complete all as specified & directed.
M&L 15mm thick screed bed on fair faces of concrete/ brick surfaces in CM 1:4 with water proofing compound @ 3% of wt of cement finished even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified. (Polymeric membrane and WPC shall be meausred and paid seperately here-in-after).
Supply only integral water proofing compound.
M&L water proofing treatement to RCC roof slab including parapet comprising of following course of treatement/ specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. (b) Over the priming coat of bitumen primer 85/25 and laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.6 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 150 gms per sqm polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flushing.
M&L two coat of reflective silver aluminium paint over APP membrane complete all as specified and as directed.
M&L providing precast cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span,cills, steps, seismic and other similar bands, plinth courses, string courses , lacing courses, parapits and railings upto 60cm in height, copings kneelers, apex stones, bed plates, kerbs not provided for in item No 04028 water throughs and the like including weathering slightly rounded or chamfered angles and throating as directed
M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed.
M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:4 complete all as specified and as directed.
M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) straight or curved on plan to any radius in half brick thick wall, built in CM 1:4 complete all as specified & directed.
M&L 15mm thick rendering in CM 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cement complete all as specified and directed.
M&L15mm thick rendering in CM 1:6 on other than fair faces of brick work surace rendering is to be even and smooth with out using extra cement complete all as specified and directed.
M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse sand, cement and aggregate in the ratio of 1:1:1 shall be applied and finished even .The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified & directed.
M&L rendering 5mm thick in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified & directed.
M&L rendering 5mm thick in CM 1:4 on concrete surfaces such as beams, column etc finished even and smooth without using extra cement complete all as specified & directed.
M&L preparation of newly plasterd surface of wall and applying two coats cement base paint over a coat of primer complete all as specified & directed.
M&L preparation of newly plasterd surface of wall and applying two coats oil bound distemper over a coat of primer complete all as specified & directed.
M&L preparation of newly plastered surface of ceiling applying three coats of white wash complete all as specified & directed.
S&F box type steel window 1.25mm thick box type ERW hollow P section of size 60mm x 25mm single rebated comprise of gauged skelton shutter ERW size 50mm x 20mm and 1.25mm thick with two openable leaf consisting two Nos sash bars of T- Section 20mm x 3mm welded to frame with one vertical mullion of ERW box type T- section of size 60mm x 25mm and 1.25 mm thick including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 (four Nos for each window) as per TD.
All as per item No 37.00 above but window with glazed shutter.
S&F factory steel ventilator with top hung shutter incl hinges, peg stay complete all as specified & directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples to wooden/ steel frames with beading complete all as specified & directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.
S&F frame work such as grills,gratring etc, with ends of bars shouldered &/or riveted or forged into spikes, framed guard bars, barred iron door ladder, frame balusters,walk ways, railing,frame work or water tanks & similar work conforming to Fe-290 Gde E-165.
S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, both face covered with deco rative face veneer with lipping/frame to match commercial type on both sides with self closing circular knob for locking arrangement complete all as specified & directed.
M&L factory made 2nd class glazed and skelton door shutter made out of stiles & rails of 30mm thick 2nd class hard wood, klin seasoned and chemically pressure treated & open reabted and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain,chamfered of rounded, fitted with and mitred beads for securing glass etc compelte, the size of members of shutter shall be as per IS-1003. The shutter shall be fitted to the chowkhats as directed by Engr-in-Charge.
S&F preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified & directed.
M&L for preparation of newly wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified and directed.
M&L framed work as in doors or gates angle or other covering door, cooler stand etc to be prepared for handing or sliding with including either hooks and hinges or steel hanging dor fittings (exclusIve of steel or othr covering, running rails and guides) and hanging also fastening and fixing complete conforming to FE-290 Gde E-165.
M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation filling and mass concrete as floor sub base complete all as specified & directed.
M&L PCC 25mm thick 1:2:4 type B0 (using 12.5mm graded aggregate) as in floor as in levelling levelling course complete all as specified & directed.
M&L machine cut kota stone flooring 18 to 20mm thick over cement sreed beed 1:4, 20mm thick laid and jointed in grey cement slurry mixed with pigment to match the shed of the slab including rubbing polishing complete all as specified & directed.
All as per item No 50.00 above but as in skirting over and including 10mm thick rendering in CM 1:4.
M&L non skid ceramic tiles (coloured) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 in floors etc laid over 15mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.
M&L glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick over 10mm rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.
M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement including filled the joints (joints shall be 6mm wide and 10mm deep) with bituminous mastic filler at the ratio of 1 part of bitumen 3 part of sand) complete all as specified & directed.
S&F factory made solid PVC moulded door shutters 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed.
S&F exctruted aluminum alloy with galavanisied mild steel hing pin Butt hinges 100mm long complete all as specified & directed.
S&F aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.
S&F extruded aluminium alloy handles 150mm size fabricated type anodized ISI marked complete all as specified & directed.
S&F mild steel butt hinges medium weight colod rolled of size 100mm, ISI marked complete all as specified & directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, plate and fixed all as specified.
S&F Aluminium anodised tower bolt 300mm long stove enamelled black with bright bolt & fixed complete all as specified & directed.
S&F 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F vitreous china squatting pan of Orrisa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe complete incluidng provision of lime concrete bedding complete all as specified & directed.
S&F PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked.
S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 25 mm dia complete to walls and ceiling or laid in floor.
S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors of 15mm bore.
S&F 15mm dia stop valve/angle valve of copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union complete all as specified & directed.
S&F 15mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.
S&F swivel shower rose(fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.
S&F vitreous china urinal half stall type white excluding flushing cistern, but including PTMT urinal spreader and waste pipe complete all as specified & directed.
S&F WHB flat back of size 580mm x 450mm excluding taps waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets complete.
S&F 15mm dia bore cast copper alloy chromium plated fancy type pillar tap for with out cold & hot water complete all as specified & directed.
S&F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm float valeve 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified & directed.
S&F ball valve brass high pressure with polythene float and fly nut screwed on iron pipe ad fixed 20 mm bore of pipe complete all as specified & directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed.
S&F Brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified & directed.
S&F PVC (SWR) pipes of 75mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe.
S&F PVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall complete all as specified & directed.
S&F PVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia complete all as specified & directed.
S&F PVC (SWR) bend 75mm bore of any radius complete all as specified & directed.
S&F PVC (SWR) bend 110 mm bore of any radius complete all as specified & directed.
S&F PVC (SWR)110mm Branch piece (single Y ) equal or unequal complete all as specified & directed.
S&F PVC (SWR) Vent Cowl of 110mm complete all as specified & directed.
Suface excavation n exc 30cm deep and averaging 15cm deep in any type of soil complete all as specified & as directed.
M&L machine pressed precast concrete interlocking paver block (Glossy finish)any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade and fixed with grey cement and pigment over and including 25mm thick sand cushion complete all as specified and directed.
M&L rendering 10mm thick in cement plaster 1:4 on surfaces on fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and directed.
M&L PCC 1:3 :6 type C2 (using 40mm graded aggregate) as in surface channel and drain complete all as specified and directed.
Extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed.
M&L reinforced concrete pipes, class NP2, 300mm dia laid and jointed complete with collars complete all as specified and directed.
M&L PCC 1:2:4 Type B0 (using 20 mm graded aggregate as) as in coping , roof curves, mud stops rounded or chamfered on edge complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch chanel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finish and reforming benching as required for 150mm internal dia of pipe complete all as specified and directed.
M&L reinforced concrete pipes, class NP-2, ISI marked, laid to slope in trenches, jointed and tested complete with collars for 150mm bore pipes complete all as specified and directed.
M&L (1:4:8) type C-2, (using 40mm graded stone aggregate) as in bedding to drain pipes, including packing under and haunching against the sides of pipes tested complete for 150mm bore concrete pipe complete all as specified and directed.
M&L rendering 10mm thick on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and directed.
M&L cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregate in surface channels of drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed. Notes :- Forming fair finished channel shall be measured and paid for separately.
M&L PCC (1:3:6) type C-1, (using 20mm graded stone aggregate) as in coping complete all as specified and directed.
M&L precast reinforced cement concrete M-20 (Nominal mix using cement content 360 kg/cubic metre) using 20mm graded stone aggregate for manhole cover including placing in position and set in CM (1:4) complete all as specified and directed.
M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke & heat (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm external dia) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part-I, ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed. Note : The quoted rate shall be incuded cutting, chasing, making good of distrub surfaces including matching of existing colour surface of walls.
All as per serial item No 102.00 here-in-before but for one fan point controlled by one switch and regulator.
All as per serial item No 102.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
All as per serial item No 102.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
All as per serial item No 102.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.
S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.
S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.
S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.
S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.
S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.
S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves /Bajaj/Wipro.
S&F LED type street DRACO SERIES light luminaire 20 Watt, 230 Volts, 50 Hz including all necessary fitting accessories and LED complete all as directed. Make : C&S Cat Part LTESS20WLED or equivalent of Crompton Greaves/Wipro
S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.
S&F MCB 32 Amps, single pole & neutral, 240 Volts, C curve, 10 KA, ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.
S&F MCB 6-32 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.
S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug(4 Nos) complete all as specified and directed.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core laid in trenches, along poles through pipes etc with and including taking down old unserviceable XLPE cable complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.
M&L dry sand (tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall /pole /road crossing including clamps complete all as directed.
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.
S&F ceiling fan 5 star rating 1200mm sweep 240V AC including provision of hook in ceiling of suitable size and necessary electric connection complete all as directed. Make : Havells/Crompton/Bajaj/Orient.
Supply and installation wall mounted indoor type voltage stabilizer of capacity 1 KVA for automatic operation, single phase, naturally air cooled, indoor type, designed for input variation between 90 Volt to 300 Volt with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and connecting up all as per manufacturer’s instructions & as directed. Model No. VEW 150 Plus of Make V-Guard or equivalent in Microtek, Luminous.
Supply & installation desert cooler in steel body with tank capacity of 120 Ltr, propeller type cooler fan with motor (ISI Marked) three speed 1440 RPM, 1/8 HP Copper winding, 230V, 50HZ, sealed double ball bearing, vacuum impregnated strator winding, One Year Warranty, silent operation, nominal capacity 5000 cum/hr, fan size 450mm, type of blade metallic (HIP), submersible water pump, filter pad, electric driven, single phase, 230 volts, 50 Hz, capacitor 4 mfd, suitable plug top 5/15 Amp including all accessories complete all as specified & directed by Engr-in-Charge. Make : Bajaj/ Khaitan / Crompton. Note :- (i) Filter panels, front grill and top of the cooler body shall be made of 1mm galvanized steel sheet. The sump tank and rest of the body shall be made of 1.20mm thick galvanized steel sheet. The galvanised steel sheet shall be ISI marked and shall have zinc coating not less than 100 gms/sqm and shall conform to IS : 277. (ii) All internal surface including inside of the tank, fan blades, motor body, pump, pump body shall be painted with water resistant paint conforming to IS: 986. The outer surface of the cooler shall be spary painted with synthetic enamel paint of approved shade/tint. (iii) The desert cooler shall be fitted with adjustable grill with separate on/off switch of 5/6 Amp rating (ISI Marked) for cooler fan and water pump and three stage speed regulator (Low, Medium, High) for three speed cooler fan motor. (iv) Suitable nylon bushes shall be provided in the grill for easy and smooth movement of louvers. (v) The filter pads shall be contain wood wool.The filters pads shall be fixed over the panel and seured by clamping guard of galvanized wire of 2mm dia (approx) squre /rectangular.The wire guard shall be fixed in the clamps to avoid any sagging.
Supply, installation & testing Geyser (water storage type) of capacity 25 litre vertical mounting type, suitable for 230V, SP, 50 Hz AC supply fixed with & including ‘Anchor’ type /fastener type bolts & nuts (Set of 4 bolts of 10mm dia 150mm long with nuts & washers) into the wall grouted properly to hold the geyser and making good the disturbed surface as original all as per manufacturer’s instructions & as directed. Make :- Bajaj / Crompton Greaves / Usha Lexus / Venus
Supply, installation and commissioing Water Cooler, 80 litre of storage capacity and cooling capacity of 40 litre per hour, BEE 5 star rated, Partially Stainless Steel (PSS), electric driven, single phase, 230 Volt, 50 Hz, hermetic type compressor with suction gas cooled motor equipped with overload protector, propeller type (Quiet) condenser fan, automatically controls temperature thermostat, 02 Nos cold water taps, complete, all as specified. Make : Voltas / Blue Star / Usha
M/s S Amarjit Singh
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .