Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.5 L
EMD Value
₹10,060
Closing Date
27 Oct 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
Anusha s v
Construction work of new room for staff on the top floor of the Horticulture office building in Periyapatna Town
RDPR/2025-26/BD/WORK_INDENT18852
RDPR/2025-26/BD/WORK_INDENT18852
Reserved
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office K R Nagara
7 documents required · 7 mandatory
Work Done Certificate Tenderer in his name should have satisfactorily completed as a prime contractor for at any nature of work for the KW 1 works of Sl. No.12 of this notification Construction of Buildings. value not less than 25percent Rs 2.01 Lakh of the amount put to tender in any one of the last five financial year period 2020-21, 2021-22, 2022-23 2023-24 and 2024-25 should be obtained from not below the rank of Executive Engineer,With indent number
PWD Contractor Civil Registration Certificate class 4 and above
Annual turnover certificate in all classes of civil engineering construction works only for least five financial years i.e. 2020-21, 2021-22, 2022-23 2023-24 and 2024-25 obtained from the Competent authority Charted Accountant/Auditor.The tenderer must have achieved in at last one financial years of Last Five Financial Years an annual financial turnover not less than The amount put to tender Rs 8.04 Lakhs. Certificate should be in the prescribed form as in KW1 Section 3 3.2a
Annual Turnover Certificate in all classes of Civil Engineering works only for last Five Financial years ie.,2020-21, 2021-22, 2022-23 2023-24 and 2024-25 Certified from Charted Accountant with compulsory UDI number Profit and Loss, balance sheet shall be enclosed.With indent number
Submission of K Form liquid assets /availability of credit facilities of not less than Rs 2.40 Lakhs Credit lines/ letter of credit certificates from Nationalized bank for meeting the fund requirement as per KW-1
Reserved Category Certificate should be attached
As per PWD Code 251. Jurisdiction: Contractors registered under class I and II may tender for works anywhere in the state. Contractors registered under class III may tender for works within the districts of the Public works Department circles where in they are registered. Contractors registered under Class IV may tender for works within the district or within the division whichever is applicable, where they are registered. These registrations are valid for all
₹500
₹10,060
13 Oct 2025
13 Oct 2025
28 Oct 2025
24 Oct 2025
Construction work of new room for staff on the top floor of the Horticulture office building in Periyapatna Town
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled
including making plaster groves (excluding cost of cement concrete a...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joint...
Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case o...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 200 x 90 x 65 mm ---- Complete...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia( P.No 128, I.No.14.28.1 Vol-2, 2023-24 SR) ---- Complete as per technical specificatio...
Providing and fixing brass bib cock of approved quality 15 mm nominal bore (P.No 115, I.No.13.2.1 Vol-2, 2023-24 SR) ---- Complete as per technical specification with all lead and lifts loading,unload...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore (P.No 115, I.No.13.5.1 Vol-2, 2023-24 SR) ---- Complete as per techni...
Providing and fixing gun metal non- return valve of approved quality (screwed end) 25 mm nominal bore(P.No 115, I.No.13.6.1 Vol-2, 2023-24 SR) ---- Complete as per technical specification with all lea...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw1 hArticultural dept peeriyapatana (pavarga 2a) -.docx
Tender Document • 0.07 MB
notification 10 final pdf.pdf
Others - Notification • 7.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .