ADDN ALTN AND UPGRADATION OF STN GYMNASIUM AT AF STN SINGARSI

Amount

Excavation of hard/dence soil in post holes (or similar holes) each n exc 0.5 Cum getting out returning ,filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25cm,watering including demolition of existing surface complete all as specified and directed.

S& F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes all as specified and directed by Engr-in-Charge.

M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete or for fixing of RCC/ angle post complete all as specified and directed

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm, n exc 10cm long and diameter of neck 16 to 20mm complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed(Gde-Fe-290 GdeE-165.)

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge/flusing/eves board of width or girth not less than 600mm complete all as specified and as directed.

M&L for Mild Steel work as in flat iron for fix the steel framework for eaves board and wind tie complete all as specified and as directed .

M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as directed.

M &L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and as directed.

M &L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on brick wall and finished even and smooth without using extra cement mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed.

Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement complete all as specified and as directed.

M&L for preparation of old prepared surfaces of walls surface and and applying one coat of Cement based paint complete all as specified and as directed.

Supply only approved integral water proofing compound.

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 1to 2 mm wall care putty complete all as specified and as directed.

M & L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with birla white putty and brooming to remove all dirt etc and applying two coats of distemper over one coat of alkali resistant primer over 1mm wall care putty complete all as specified and as directed.

M & L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with birla white putty and brooming to remove all dirt etc and applying two coats of 1st quality light shade plastic paint over one coat of interior emulsion primer over 1mm wall care putty complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M & L Preparation of old wood and wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

M & L Preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

M&L for preparation of existing surface of wall and applying one coat of acrylic exterior water proof emulsion paint (Camouflage pattern as directed by Engr-in-charge) complete and including all necessary scaffolding, complete all as specified and directed.

M & L for Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes and filling cracks with chalk whiting, and brooming to remove all dirt etc and applying one coat of disemper on old prepared surfaces of ceiling complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises all as specified and directed by Engr-in-Charge

M&L for coloured non skid premium quality ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L Glazed premium quality ceramic coloured designer seamless tiles 450X300X7 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick rendering/backing coat in CM 1:3 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons all as specified and directed by Engr-in-Charge

M&L for Machine cut kota stone slab flooring 18-20mm thick over 20mm cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed by Engr-in-Charge.

M & L Granite 18-20mm thick (of any type) work (table rubbed and mirror polished in slab top, steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite including chemfering and rounding the edges complete all as specified and as directed.

M&L glossy finish chequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors using white cement and pigments including 15mm thick screed bed in CM 1:6etc as per design/pattern approved by AGE(I) etc complete all as specified and directed by Engr-in-Charge..

M&L glossy finish Machine pressed precast concrete interlocking paver block rubber moulded laid with Grey cement and pigment any size and shape conforming to IS 15658-2006 of 60mm thick M-35grade over and including 50 thick sand cushion etc complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exc 50m at low lying area complete all as specified and as directed.

M & L for 50mm thick cement concrete M-15(1:2:4) type B-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete all as specified and diredted.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out for hard and dence soil complete all as specified and as directed.

M&L PCC 1:4:8 type D2 ( 40 mm graded aggreage ) as in foundation/sub base complete all as specified and as directed.

Returning filling including Spreading and leveling with excavated earth including watering and well ramming in layers n,exc 25cm thick complete all as specified and as directed.

Removing excavated soil to a distance not exc 50m and depositing where directed at a level n. exc 1.50m above the starting point and complete all as specified and as directed.

M&L for RCC (nominal mix) Type B1(1:1.5:3) (using 20mm gradded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC (nominal mix) Type B1(1:1.5:3) (using 20mm gradded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

Formwork to sides of concrete foundations, footing ,bases of colums, plinth beams rough finished surfaces and similar work complete all as specified and as directed.

Formwork rough finish to side of columns, fair finished surfaces of concrete square, rectangular and similar work complete all as specified and as directed.

M&L reinforced cement concrete nominal mix type B1 (1:1.5:3) using 20 mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC (nominal mix) Type B1 (1:1.5:3) (using 20mm gradded stone aggregate) as in beams and lintels above1.50m clear span etc. complete all as specified and as directed.

Formwork to side and soffits of floor or roof beams,lintels etc flat for rough finished surfaces complete all as specified and as directed.

Use and waste for formwork rough finish to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clip and confirming to grade Fe-410-W(Gde-250) complete all as specified and as directed.

--do-- but 5mm dia and over upto and incl. 10mm dia in stirrups spacers and binders complete all as specified and as directed.

Taking down chowkats or frames with shutters exc 1.50 Sqm and n.exc 4 Sqm each. (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames) complete all as specified and as directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F Stainless steel butt hinges 75mm size, medium weight cold rolled mild steel complete all as directed.

S&F 150 mm length aluminum, anodised, barrel tower bolts of extruded section complete all as directed.

S&F 100mm size of aluminum handles, cast type anodised complete all as directed.

S & F of Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets,complete all as specified and as directed.

Cutting holes in stone walls in cement mortar for inserting holdfasts n exc half brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

M&L PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in hold fast block, including form work complete all as directed.

S&F repair tubular brass chromium plated decorative 20mm curtain rod fixing with brackets complete all as specified.

S&F repair fancy type powder coated decorative curtain rod bracket and holder for fixing curtain rod complete all as specified.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified .

S&F of 10mm Toughned glass as in hinged doors,fixed partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor complete all as specified and as directed.

S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&Frepair 15mm dia basin mixture 3in 1 system with 115 mm bend pipe, areator and small knob complete all as specified and directed as approved by engr in charge .Make ESSCO /Prayag/johnson/jaquar or equivalent as approved by engr in charge .

S&F in repairs Vitreous China Wash hand basin white Oval shape, size 580 mm x 450 mm size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia chromium plate coupling 32 mm dia, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

S&F in repair Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repair fancy type 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and as directed.

S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S/F as in repairs of 15mm dia, two way long body bib cock with wall flanges fixed with iron pipe complete as spacified and directed by Engr -in-Charge. Make ESSCO /Prayag/johnson/jaquar or equivalent as approved by engr in charge .

S&F in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges in repairs. Make- Prayag or equivalent. complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap 75 mm Dia Outlet , plain with CP grating including joining and solvent cement complete all as specified and as directed.

S&F in repair HDPE pipes of pressure rating 6kgf/sqcm of 32mm bore for outlet pipe of WHB complete all as specified and as directed.

S&F in repairs CP soap dish of approved size complete all as directed

S&F Sheet glass shelf/corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 110mm dia bend any raius all as specified and directed.

S&F PVC (SWR) 75mm dia bend any raius all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequa all as specified and directed.

S&F PVC (SWR) 75mm dia bend with access door any raius all as specified and directed.

Cutting chases,pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for concealed water tubing and making good, cutting not exc.10cm girth complete all as specified and as directed.

Taking up or down steel tubing pipe with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and as directed.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified and as directed.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm complete all as specified and as directed.

M&L for 4.5mm Maple finish PVC Vinyl flooring that is heavy duty but soft enough for a comfortable and jerk free workout in a gym, sports court or a fitness centre. The high strength wear layer takes care of the heavy loads the Impregnated glass fibre Tissue reinforced provided a very high dimension stability and lay flat properties to the product in any weather conditions. The densely compacted cushioned base layer absorbs the jerks and also adds to the acoustical property of the floor. with all allied works,Complete all as specified and directed.

S&F for 15mm thick 100% naural Rubber Inerlocking tiles with all four sides will comes in male and female groves so that It can get joint with other tiles with all allied works,Complete all as specified and directed.

S&F of Stainless steel locker wall mounted of overall size of 1.80mX0.9mX0.45m (10no of locker size of each locker 0.45X0.450.45m with locking arrngement) and thickness of body 1mm complete all as specified and directed.

Dismantling PVC/cement water tank exc 500 ltrs but n exc 1000 ltr capacity and removing from MD land Complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank white colour triple layered ( cylindrical vertical with closed top) hoisted and fixed in position of1000 liters capacity confiring to IS specification Complete all as specified and directed.

Taking down existing water proofing treatment including cement plaster and cleaning with wire brushes roughening the surface and hacking out dirt, where directed and disposal of rubbish n,exc 50mm distance from the starting point complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and 3mm thick reinforced with polyester non-woven fabric (weight not less than 160gms/sqm) laid on surface applied with bitumenous primer @ 0.25 litres per sqm, by torch application with overlaps 100 mm on the traverse direction and 75 mm on longitudinal direction on existing RCC roof surface and applying one coat of aluminium paint over the top surfaces of membrane @ 0.11 Litres/Sqm complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in roofs, floors other than ground floors beams staircases, landing, hajjas and similar suspended work ccomplete all as specified and as directed by Engineer-in-Charge.

M & L for PCC type B0 1:2:4 (12.5 mm Graded stone aggregate) as in roof padding,chajja repair complete all as specified and as directed by Engineer-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed.

M&L point wiring for one light point with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping slotted 40/25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed.

All as per Item No 101 here-in-before One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size all as specified and as directed.

All as per Item No 101 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 2.5 Sqmm copper cable FRLS & 2.5 Sqmm FRLS copper cable for earth continuity wire complete all as specified and as directed.

S&F for switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed.

S&F for switch piano flush type 6 Amp single pole one way complete all as specified and as directed.

S&F for switch socket combination flush type 6 Amp single pole one way on independent board complete all as specified and as directed.

S & F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed.

Supply and fixing sub main wiring with two run of single core 10 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC conduit with all fittings including 10 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping and including PVC casing caping all as specified and as directed. Note : (i) Two run of single core cable 10 sq mm and one run earth wire 10 sq mm will be measured as one length.

All as per Item No above here-in-before item No. 108 but of size 6 sqmm

All as per Item No above here-in-before item No. 108 but of size 4 sqmm

S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 4 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed.

S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 8 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed.

S&F VTPN distribution board with provision of MCCB as incommer, double door suitable for mounting MCB's/Isolators, 240 Volt,4 way with built in160A rated bus bar and with out MCCB complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed.

M&L for MCCB, 4P, 415V, overload adjustable 0.63 - 0.8-1 x in short circuit fixed 63/40 Amps breaking capacity 16KA complete all as specified and as directed.

M&L for MCCB, 4P, 415V, overload adjustable 0.63 - 0.8-1 x in short circuit fixed 25 Amps breaking capacity 16KA complete all as specified and as directed.

M & L for MCB, SP, 240V,40 Amps and ' B ' series breaking capacity 10 KA ISI marked complete, all as specified and as directed.

M & L for MCB, SPN, 240 V, 40 to 63A Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked , all as specified and as directed.

S&F in repair LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in repair LED light fitting mirror type with high out put diffuse, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed .

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed .

Supply & fix LED High bay 180W soft glare free light complete for badminton courts with lux level 280-350 lux, with driver, holders suitable for roof ceiling including making arrangements to hang the fittings at least 33 feet (10 meters) and angled at 45 degrees to court, light arrangements should be such that multiple lights should be placed in each row to avoid shadows all complete and all as directed .

Supply & fix LED down lighter 2'x2', 40/42 W complete for badminton courts with lux level 280-350 lux, with driver, holders suitable for roof ceiling including making arrangements to hang the fittings at least 08 meters light arrangements should be such that multiple lights should be placed in each row to avoid shadows all complete and all as directed .

Supply and fixing LED flood light 210 watt 230 V AC with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete for badminton indoor courts with lux level 300-350 lux, for wall / pole mounting including making arrangements to hang the fittings on wall / poles and angled at 45 degrees to court, light arrangements should be such that multiple lights should be placed in each row to avoid shadows all complete and all as directed .

Supply and fixing wall mounted heavy duty fans 450/600 mm sweep for ventilation including making arrangements for fixing it on wall all complete and all as directed .

S&F metal clad box enclosure with socket plugtop and MCB SP 20 Amp flush of 240v mounting enclosure with 2 pin earth plug socket complete all as directed

Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm, 4 core complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick burried in ground (earth pit not less than 2.25 m deep below ground level0with top edge of the plate not less than 1.5 m below normal ground level, connected to earth lead wire 4.0mm dia as earthing lead by means of bolts, nuts, check nuts, and washers of GI or steel, GI strip protected by 40 mm bore medium grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade GI, wire mesh charcoal or coke common salt laid in altrnative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC(1:3:6) type C-1, 50 mm thick pre-cast RCC(1:2:4) type B-1 normally mix cover slab reinforced with in 8 mm dia TMT bar 10 cm C/C both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft/loose/hard soil and disposal of soil to a distance n.exc 50 m and necessry testing on completion all as shown in electrical plate No 3 MES schedule part-I complete all as specified and as directed.

Schedule of Credit

M/S New Builders Corporation (BID ID -3298805)

M/S AMARNATH AGARWALLA (BID ID -3305933)

M/S ASHA ENTERPRISE (BID ID -3305715)

M/S MBS TRADING CO (BID ID -3306229)

M/S KUMAR AVINASH (BID ID -3300854)

M/S Subhadip Enterprise (BID ID -3305707)

LALAN SHARMA (BID ID -3305989)