Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.7 LAccepted-AOC BMC 1 54 GANTI NETAJI PALLY PO GANGANAGAR KOLKATA 700 132 INDIA | 24 PARAGANAS NORTH | WEST BENGAL | 700132 | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹24.9 L+₹1.7 L (7.14%)Rejected-Finance PO CHANDL PS BISHNUPUR DIST SOUTH 24 PGS PIN 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹25.7 L+₹2.5 L (10.7%)Rejected-Finance 51 1 FULBAGAN ROAD BAGHAJATIN KOLKATA 700086 WEST BENGAL | KOLKATA | WEST BENGAL | 700086 | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹25.8 L+₹2.6 L (11.4%)Rejected-Finance 30 SHIVTALLA STREET KOLKATA 700 007 | KOLKATA | KOLKATA | WEST BENGAL | 700007 | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹26.1 L+₹2.9 L (12.7%)Rejected-Finance 0 GANGARAM DHARMKANTA TRUCK UNION JIROTA KALAN DAUSA DAUSA RAJASTHAN 303303 | DAUSA | RAJASTHAN | 303303 | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹26.6 L
EMD Value
₹53,200
Closing Date
11 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL SAURABH GUPTA
GARRISON ENGINEER (CENTRAL) KOLKATA T37 NAPIER ROAD HASTING KOLKATA 700022
COMPREHENSIVE B/R DAY TO DAY MAINT AND PERIODICAL SERVICES AF CAMP BALLYGUNGE AND CERTAIN MISC B/R REPAIR WORK AT AIR FORCE CAMP BALLYGUNGE UNDER GE (CENTRAL) KOLKATA
2023_MES_621268_2
8646/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
KOLKATA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (CENTRAL) KOLKATA
₹53,200
Yes
18 Mar 2024
23 Dec 2023
12 Jan 2024
23 Dec 2023
11 Jan 2024
30 Dec 2023
23 Dec 2023 - 29 Dec 2023
Amount
Demolition Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.
Dismolition Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed.
Demolition of Brick Work or stone masonarybuilt in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.
Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed.
All as item No. 5.00 above but exc 1.5 Sqm and nexc 4.0 Sqm each.
Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each and removing from site or to store as directed by Engineer in charge.
All as per Srl item No 7.00 here-in-before but exc 2.00 Sqm each.
Taking down shutters any description exc 1.00 Sqm but not exc 2.00 Sqm each and refixing the shutter in same opening after easing and adjusting complete as directed by Engineer in charge.
All as per Srl item No 9.00 here-in-before but exc 2.00 Sqm each.
Dismantling Plain steel sheeting as in doors, gates of any gauge and any thickness etc complete all as specified and directed.
Dismantling of GI (corrugated, semi corrugated, Plain) sheet in roof covering incl ridges complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling fencing wire mesh, any type complete all as specified and as directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed.
Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed.
Hacking Out Old Broken Glass (any thickness, size, quality or description) from metal frames incl punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
All as per item No. 19.00 above but 20mm dia bore.
Taking down unserviceable PVC (SWR) Pipes & Fittings of any size or pattern and in any Position (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed.
Demolition and breaking up 150mm bore drain pipes (salt glazed ware, AC or reinforced concrete ) set in cement mortar complete all as specified and as directed.
Demolition and breaking up 200mm bore drain pipes (salt glazed ware, AC or reinforced concrete ) set in cement mortar complete all as specified and as directed.
Excavation in trenches through manual mean not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and getting out as in Soft/Loose Soil, complete all as specified and as directed.
Excavation in trenches not exc. 1.5 Metre wide and exc. 1.50 Metre but not exc. 3.0 Metre or part there of in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and getting out as in Soft/Loose Soil, complete all as specified and as directed.
Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed.
Removing excavated Material (Soil) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed.
M&L Cement Concrete 1:3:6 (40 mm graded crushed stone aggregate) as in Holdfast Block / Bedblock including necessary form-work, etc., complete all as specified and as directed.
M&L for Precast reinforced cement concrete Type B-1 (1:2:4) (Using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes, drain etc.) chullah hoods and similar articles with plain faces with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed. Note: (i) Necessary form work shall deemed to be included in quoted rates. (ii) Reinforcement shall be measured and paid separately under relevant item of these schedule.
M&L for providing cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in lintels upto 1.50m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parpets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering , slightly rounded or chamfered angles and throating including necessary form works etc.
M&L 40mm thick pre-cast reinforced cement concrete louvres and jallies (measured solid) in cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate including all moulding and set in cement mortar 1:4 complete all as specifieed and directed.
M&L fly ash bricks pulverizes using class 'A 'old size bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified and directed.
M&L half brick thick brick work with fly ash bricks pulverizes straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.
S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed.
S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.complete all as specified and directed.
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.
S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed.
S&F Aluminium handles, cast type, anodised, 150 mm long and fixed with steel screws complete all as specified and directed.
S&F Aluminium anodised, barrel tower bolts of extruded section, 200 mm long and fixed with steel screws complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed.
S&F (piano) mild steel, bright finish or electro galvanised Width of flaps (When open) 30mm complete all as specified and directed.
M&L Mild Steel Plain Black Sheet 1.25mm thick in Hearths, covering to Door Shutters, covering to Door Chowkats (Frames), Water Tanks, etc. cut to size edges beaded if directed, holes punched including round headed Screws Clout Nails or Rivets and fixed to Wood or Steel Members, etc., with plain 40 mm Lap Joints or welded/riveted Seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, complete all as specified and as directed.
M&L for TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing for Fe-290 E-165 grade complete all as specified and directed.
S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work complete all as specified and directed.
S&F Mild steel angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut of 11 to 15mm dia, and 5cm to 10cm long complete all as specified and directed.
S&F Steel window with side hung shutter including projection type hinges with steel handles, and steel peg stay with glazing bars dovetailed or welded incl taking out old window complete all as specified.
S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured) as in repair.complete all as specified and as directed.
S&F PVC coated chain link fencing mild steel galvanised 3.00mm dia (minimum weigth 3Kg/Sqm) of wire and spacing 75mm x 75mm including line wires to any standards, rails and straining bolts including provision of binding wire complete all as specified and directed. Note :- Line wire ,binding wire and bolts/nuts shall be measured and paid separetaly under relevant item of BOQ
M&L Mild steel round Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with galvanised Steel Wire not less than 0.90 mm and staple as in line wire complete all as specified and as directed.
M&L for Pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate
M&L for Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, crumple joints, ridge cover, etc fixed with self tapping screws etc; complete all as specified and as directed.
S&F Plain Sheeting 0.80mm thick galvanised with Zinc Coating @ 120 Gram per Square Metre as in Ridges, Hips, Valley Gutters, etc., fixed with L-Type or J-Type Cranked Hook Bolts with Washers, etc., complete all as specified and as directed.
S&F in repair Gypsum board 7-8mm thick in ceilling fixed with screw as per manufacturer's instructions, plain/ colour fixed with steel snap grid (powder coated bottom side) with 'T' and 'L' (25mmx30mmx1mm thick) section of size 600mm x 600mm placed in ceiling 'L' section fixed with wall with PVC rawal plugs and steel screws @ 600mm centre to center and suspended/ provided 5.0 mm dia galvanised bars @ 1.00 sqm hanging arrangements and levels including adjustable clips, complete all as specified in clause 10.38 of MES Schedule Part-1 complete all as specified and directed by Engineer-in- Charge. Note :- If any minor electricial fittings and fixtures disturbed there-in will be match and fixed as existing.)
M&L of 1.50mm thick power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section No 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, handles 2 Nos , anodised aluminium snap beading screws etc.Complete all as specified and as directed. Note Nos :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, Glass f& wire mesh etc shall be deem to included quoted rate. Only measure opening size of window.
Petty repairs to any type of Aluminium Doors, AluminiumWindows, Aluminium Ventilators, Aluminium Louvers, Aluminium CB shutters etc of any description, in any situation by taking down & refixing shutter including replacement of joining cleats, glazing clips, rubber neoprene packing, aluminum snap beading, screws & tightening, adjustment etc ,making smooth functioning (proper closing, opening) etc with entire satisfaction of Engineer-in-charge complete all as specified and directed.
Petty repairs to wardrobes, cupboard, kitchen cabinet, Showcase items of any description in any situation including Resecuring,easening of shutters, shelf etc including taking down and refixing in position with new nut, screw ,washer etc including adjusting, tightening of builders hardware such as lock,wiremess,glass pane, Ball catches, knobs ,hasp and staple ,piano hinges,handles & refixing builders hardware in same/other position making smooth functioning (proper closing, opening) etc with entire satisfaction of Engineer-incharge complete all as specified and directed.
Petty repairs to any type of wooden joinery works of shutters, shelf etc such as door, window, Ventilator of any description in any situation by taking down & refixing in the same opening including Resecuring,easing, adjusting ,refixing builders hardware butt hinges,tower bolts,handles,sliding door bolts,rat tail,lock,ball catches,knobs,hasp & staple,peg set,door stopper,piano hinges,door cill strip etc wiremess,glass pane in same/other position,renewal of screws,welding (if required) etc,wooden beading & tightening of GI/steel wiremesh etc making smooth functioning (for proper closing ,opening) etc with entire satisfaction of Engineer-in-charge complete all as specified and directed.
Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth complete all as specified and as directed.
M&L Cement Concrete type C2 (1:3:6) using 40mm graded aggregate 100mm thick in Sub-bases, finishing concrete surfaces fair and even, complete all as specified and as directed.
M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directed Note:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate
M&L 25mm thick rubber moulded prepolished coloured PCC chequered tiles of size 400 x 400 x 25mm set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.
Cleaning of existing interlocking paver block and applying of Two coats of floor paint (Indigo Floor Paint / Apex Floor Guard) complete all as specified and directed. Note:- Existing Paver block obtain from dismantling item here-in-before.
Labour only for relaying of cleaned and painted 60mm thick interlocking paver block including sand cushioning complete all as specified and directed. Note:- Existing Paver block obtain from dismantling item here-in-before.
M&L petty repair area not exceeding 05 sqm each & matching with existing tiles for Vitrified Ceramic tiles 8-10 mm thick light/Dark shade (square/ rectangular) polished, area of each tiles exceeding 0.06 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 including dismantling existing tiling with cement mortar bedding including dismantling existing tiling with cement mortar bedding complete all as specified and directed. Note:-The bidder quoted rate included for all straight, Raking or circular cutting, wastage on tiles & texture, colour, size,Shade, laying of tiles to any pattern & any design with one or more colours shall be approved by GE.
All as per srl item no 70.00 here-in-before but in as vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4
M&L work as in petty repair area not exceeding 05 sqm each & matching with existing tiles for Joint free Non-skid Ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tiles not exceeding 0.38 sqm in floor,horizontal,shelf etc set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling existing tiling with cement mortar bedding complete all as specified and directed. Note :- The texture ,colour, size, shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
All as per srl item no 72.00 here-in-before but as in verticle/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4.
M&L in Patches area not exceeding 05 sqm each & matching with existing tiles for (first quality) (07mm to 10mm) thick coloured Glazed ceramic tiles including digital/printed/High lighter tiles in vertical surface such as dado,pillar etc area of each tiles not exceeding 0.20 sqm , set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 including dismantling existing tiling with cement mortar bedding complete all as specified and directed. Note :- The texture ,colour, size, shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
M&L Granite slab 15 to 20mm thick of any type work table rubbed and polished in kitchen platforms and like over and including cement screed bed 15mm thick in CM (1:6) bedded and jointed with grey cement slurry and pointed with white cement mortor (1:2) using marble dust with admixture to match with shade of granite complete all as specified and directed.
M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed.
M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound as per manufacturer instruction complete all as specified and directed.
M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smoth without using extra cement complete all as specified and directed
"Supply only" liquid water proofing compound (ISI marked) complete all as specified and directed.
M&L Preparing old decorated surfaces of Ceiling and applying one coat of Distemper Oil Emulsion , complete all as specified and as directed.
M&L Preparing old decorated Plaster Surfaces of Ceiling and applying One Coat of White Wash, complete all as specified and as directed.
M&L Preparing old decorated surfaces and Finishing walls with one coat of Acrylic Smooth exterior paint (Asian Paints - Apex Ultima/Berger Paints -Weathercoat Lifelong 7/Dulux Paints - Wheathershield Utraclean) of required shade complete all as specified & directed.
M&L Preparing old decorated plastered surfaces of Walls and applying One Coat of Cement Base Paint complete all as specified and as directed.
M&L complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer complete all as specified and as directed.
M&L Complete removal of existing surface with sand paper to an even and smooth texture and finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and as directed.
M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.
M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Varnish (First quality), complete all as specified and as directed.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L Preparing new Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 3mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.
M&L complete removal of old decorated surfaces and Finishing walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 3mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.
M&L Preparing new Surfaces of Ceiling and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 3mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.
M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work/old work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed.
M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of White Wash, complete all as specified and as directed.
M&L Preparing old decorated surfaces of Walls and applying one coat of Distemper Oil Emulsion , complete all as specified and as directed.
S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane.complete all as specified and directed.
S&F 4mm thick frosted glass panes and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified.
S&F for 20mm outer diameter CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F for 25mm outer diameter CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.
S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.
S&F PVC (SWR) Bend 75mm bore (dia), any type, equal or unequal with Rubber Ring Joints fixed to Walls, as in repair complete all as specified and as directed.
S&F PVC (SWR) Bend 110mm bore (dia), any type, equal or unequal with Rubber Ring Joints fixed to Walls, as in repair complete all as specified and as directed.
S&F PVC (SWR) Branch Pieces 75mm bore (dia), (double Y) equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) Branch Pieces 110mm bore (dia), (Single Y) equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) Branch Pieces 110mm bore (dia), (double Y) equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) Vent Cowl 110mm bore (dia), Jointing to Pipe with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) Nahani/Floor Trap 75mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement, complete all as specified and as directed.
M&L in repairs for leaking water in brass/CP bib tap, pillar tap, concealed stop cock, angle valve of any make/ description/size in any position by replacing the (brass spindle+brass jumper washer + CP Wall Flange) ,tightening of fittings etc ,also removing air lock, blockage in water pipe line & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed
M&L in repairs for leaking water in brass/CP Wall Mixer, basin mixer, sink mixer of any make/ description/size in any position by replacing the brass spindle & washer, tightening of fittings etc ,also removing air lock, blockage in water pipe line & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed.
M&L in petty repairs for PVC assembly internal kit fittings with complete set ,all fixing Accessories & Set for single Piece-WC (any type,make,pattern, Twin/Single Flushing Fittings & size)with combined flush tank complete all as specified and directed. Make :Model No. S1012135 of Cera or equivalent in any make mentioned in list of product.
M&L in petty repairs for (PVC Syphon assembly (internal kit)+ PVC washer+PVC clamps ,bracket for hanging with wall) for any type/size/make of low level flushing cistern,tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed.
Disconnecting existing tanks of capacity 250 liters setting aside (or lowering, hoisting if required) for repairs & scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of PVC/RCC water storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required and removing vegetation around the over head tank after opening tank cover, inlet, outlet etc and reconnecting with GI/CPVC tubing and re-fixing in position ,refixing the tank including cover after cleaning in position , write date of cleaning by synthetic enamel paint on tank complete all and specified and directed.
All as per item no 114.00here-in-before but for 500 ltr Capacity
All as per item no 114.00here-in-before but for 1000 ltr Capacity
S&F matching with existing PVC tank lid/cover for water storage tank of capacity 250 Ltrs with necessery fixing arrangement as in repair complete all as specified and directed.
All as per item No. 117.00 here-in-before but for 500 Ltr tank capacity
All as per item No. 117.00 here-in-before but for 1000 Ltr tank capacity
S&F triple layer PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismental of old water tank and removing from site. complete all as specified & directed.
S&F triple layer PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismental of old water tank and removing from site. complete all as specified & directed.
S & F in repair for 15mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and directed.
All as per srl item No 122.00 here-in-before but 20mm bore dia (Minimum weight 25mm-455gms)
All as per srl item No 122.00 here-in-before but 25mm bore dia (Minimum weight 25mm-455gms)
S & F in repair for chromium plated Bib taps for 15 mm bore pipe complete all as specified and directed. Make : Essco (TQT-511KN) or equivalent
S & F in repair for brass chromium plated long body bib cock with Wall Flange for 15 mm bore pipe complete all as specified and directed. Make : Essco (TQT-512) or equivalent
S & F in repair for brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed Make : Essco (TQT-512AN) or equivalent
S & F in repair for brass chromium plated Pillar Tap screwed for 15 mm bore pipe complete all as specified and directed. Make : Essco (TQT-508) or equivalent
S & F work in repair for ABS body chrome plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed Make : Essco (EOS-542A) or equivalent
S & F in repair for shower arm 240mm long round shape with flage including fixing to steel pipe or union complete all as specified and directed Make : Essco (ALE-536A) or equivalent
S & F in repair for 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. Make : Essco (TQT-526N) or equivalent
S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed. Make : Essco (TQT-526A) or equivalent
S & F in repair for chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) Make:- Essco (CAT No. ALE-ESS-583) or equivalent
S & F in repair for Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed. Make - Prayag (Cat No. 721) or equivalent
S & F work in patches in repair for brass chromium plated Centre Hole Mixer for WHB screwed for 15 mm bore pipe complete all as specified and directed Make : Essco (TQT-516A) or equivalent
S & F work in patches in repair for 15mm bore brass chromium plated Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed. Make : Essco (TQT-517B) or equivalent
S&F Stainless Steel Sink l.0mm thick Overall size 495mm x 420mm and Bowl size 410 mm x 330 mm x 160 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.
Supply and fix stainless steel kitchen rack of size 31"x 36"x10" with 0.63mm stainless steel sheet with all fittings accessories as in repair , complete as directed.
S & F work in patches in repair for 15mm bore brass chromium plated Sink Mixer, Connecting Legs & Wall Flanges complete all as specified and directed. Make : Essco (TQT-521S) or equivalent
Cleaning & removing of air lock in GI pipe from outlet and making the water supply available upto bib tap, pillar tap, wall mixer, basin mixer, concealed stop cock, angle valve in water supply lines of size 15mm dia including taking down (if necessary) and re-fixing the same in position make the all system fully functional to the entire satisfaction of E-I-C complete all as specified and directed. Note :- Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to twelve storeys height of bldgs.
All as item No. 140.00 above but water supply line of size 20mm dia
All as item No. 140.00 above but water supply line of size 25mm dia
S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, 32mm dia Chromium Plated bottle trap and 15mm dia PVC connector pipe, a pair of Cast Iron Brackets duly painted Stand including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down old one complete all as specified and as directed. Make - Parryware Model No-C0406(SP)/C0434(CTH) or equivalent make as specified in the particular specfication.
Supply and fix in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed. Make - Parryware Model No-C0406(SP)/C0434(CTH) ,Hindware(10100-sw) Essco (ECS-WHT-801)or equivalent make as specified in the particular specfication.
S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device including taking down old one complete all as specified and as directed. Make - Parryware Model No-C0297 Hindware(20011-SW), Essco (ECS-WHT-551PSPP)or equivalent model as specified in Particular Specification here in after.
S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed to WC including taking down old one complete all as specified and as directed. Make : Parryware Model No- E-8090, Cera cat part No CONGO B1010109 ,Hindware(510648-SW), Essco (ECS-WHT-201C)or equivalent model as specified in Particular Specification here in after.
S&F in repair PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed.
M&L for 150mm dia Reinforced concrete pipes, class NP-3, laid and jointed with collars complete all as specified and directed.
All as item No. 148.00 here-in-before but 200 dia Reinforced concrete pipe.
M&L for Concrete bed Type C-2 (1:3:6) (Using 40mm graded crushed stone aggregate) to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed
All as item No. 150.00 here-in-before but 200 dia drain pipe
Material and Labour Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm bore of pipe complete all as specifieed and directed.
S&F for Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof Bore in pipe in 75mm to 150mm complete all as specified and directed
M&L for diameter of outlet 75mm CI floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
Lifting of cover and desilting of blocked manhole of any size and depth by mechanised suction machine and removal of sludges in water sealed container to a distance outside residential area and washing with adequate quantity of water and refixing the cover in the same location and cutting of bushes all around the manholes up to 1.0 m radius including buring the sludge in a pit spreading bleeching powder with sufficient quantity surrounding it and sealing the pit with fine sand and spreading bleeching powder surrounding the pit etc complete all as specified and as directed by Engr-in-Charge. Note:- (i) Cost of earth work in excavation required for digging the borrow pit and burrying the the waste materials / sludge in the borrow pit and sealing the pit with fine sand & spreading bleeching powder shall deemed to be included in the rate quoted. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge.
Cleaning of blocked kitchen trap / nahani trap /gully trap/ Water closet of any type / pattern upto 1st manhole and making the drain channel fully functional by flushing with sufficient quantity of water to entire satisfaction of Engineer-in-Charge including cleaning up to 1st manhole and removing the waste materials / sludge etc to a distance outside residential area and buring the same in a pit and spreading bleeching powder surrounding the area with sufficient quantiuty complete all as specified and as directed. Note:- (i) Cost of earth work in excavation required for digging the borrow pit and burrying the the waste materials / sludge in the borrow pit and sealing the pit with fine sand shall deemed to be included in the rate quited. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge. (iii) Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to twelve storeys height of bldgs.
Cleaning of soil / waste pipe/ vent/ Sewer line of any dia by rodding or with bamboo split by opening of inspection eye cover including removing and refixing inspection eye door cover in existing position etc. complete all as specified and as directed by Engr-in-Charge. Note:- (i) Once cleaned the pipe lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost. (ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge. (iii) Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to twelve storeys height of bldgs.
Cleaning of existing covered or uncovered drains, hume of any section and depth by removing mud, sludge, rubbish and other foreign materials from existing storm water drain / covered drain, static tanks etc, removal of sludges in water sealed container to a distance outside residential area and flushing with adequate quantity of water complete all as specified and as directed by Engr-in-Charge.
Taking out inspection door from Soil/waste pipe band/tee 'Y' junction and removing blockage materials from it for cleaning of blockage and finally re-fixing the door complete all as specified and as directed Note:- (i) Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to twelve storeys height of bldgs.
Cleaning and removing all debris / vegetation from RCC roof surfaces of any height and cleaning the mouth of rain water pipe and removal of materials to a distance outside residential area complete all as specified and as directed by Engr-in-Charge.
UNITED ENGINEERS
NUPUR CONSTRUCTION
SUDHA ENTERPRISES
Shanti Construction Company
AUTO ELECTRICALS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .