Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹38.1 L+₹1.3 L (3.54%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹38.1 L+₹1.3 L (3.58%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹38.1 L+₹1.3 L (3.65%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹38.3 L+₹1.6 L (4.26%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹35.5 L
EMD Value
₹71,000
Closing Date
7 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS C/o 99 APO Pin-913869
PROVN OF SECURITY FENCING WITH BARBED WIRE (LENGTH 200 MTR APPROX ) AND PROVN OF TOILET CUM BATHROOM FACILITY FOR SINGLE OR LIVING ACCN AND CERTAIN MINORS WORKS AT LEIMAKHONG MIL STN
2022_MES_534530_4
8422/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PERT TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹71,000
Yes
4 Feb 2023
23 Dec 2022
9 Jan 2023
23 Dec 2022
7 Jan 2023
31 Dec 2022
Amount
Schedule 'A'
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soft/loose soil complete all as specified and as directed.
Removing excavated material/soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Demolition of reinforced cement concrete of any description and any position (below or above ground level ) not otherwise specifically provided for complete all as specified and directed.
M&L for plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundations and filling complete all as specified and directed.
M & L for RCC 1:2:4 Type B1 (nominal mix) using 20mm graded crushed stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and directed.
M & L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
M & L for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
M&L rendering 15mm thick on other than fair faces of brick work in cement mortar(1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. (Note: Plastering shall be carried out using Dimapur Sand. Note: WPC will be measured and paid separately)
Supply of Integral water proofing Compound ISI marked complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparation of surfaces plastered or unplastered new surface and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed
M&L for PCC type type B1 1:2:4(Nominal Mix) using 20mm graded crushed stone aggregate as in coping incl necessary formworkcomplete all as specified and directed.
M&L for 75mm thick PCC type C2 1:3:6 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75mm thick PCC type D-2 1:4:8 (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L for 50mm thick PCC type D-2 1:4:8 (Nominal mix) using 40mm graded crushed stone aggregate as in sub base/sub floor complete all as specified and directed.
M&L for 75mm thick PCC type C-2 1:3:6 (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L 25mm thick cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregateas in floor, finishes even and fair to receive floor tiles complete all as specified and directed.
M & L for rendering 10 mm thick on fair faces of concrete work in CM 1 :4 finished the surface rough to receive tiles etc complete all as specified and directed
S&F 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and directed.
S & F 0.56mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed
M&L for joint free coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L for joint free coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L for joit free coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting, dado and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. including 10 mm thick rendering in CM (1:4) as in skirting, dados, and risers to steps complete all as specified and directed
M & L for rendering 10mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
S&F 350 x 250 x 7 mm / 450 X 350 X 7mm thick coloured glazed ceramic tiles in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.
M&L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe- 290 (Gde E- 165) complete all as specified and directed.
S & F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections confirming to 410-w (Gde -E-250 quality) complete all as specified and directedx
M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M & L for machine pressed precast conctete interlocking paver block vibro compacted rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment including cement concrete rounded or chamfered on edges complete all as specified and directed.
S & F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc .Fe 410-gde -E250 quality-A complete all as specified and directed.
M&L for structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.
S&F flat iron for wind ties for roof including securing bolts conforming to Fe-290 Gde-E-165 complete all as specified and directed
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for preparation of new or previously untreated surface of steel applying one coat of Black Japan Paint complete all as specified and directed
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified.
M&L for preparation of old / new decorative plastered surfaces of wall by removing all loose adhering powdery materials of defective paint by brushing, scraping and water jetting and making the smooth surface using white putty or paste filler and applying two coat of weather proof paint ( appex) over a coat of water thinnable cement primer complete all as specified and directed.
S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
M & L for RCC nominal mix 1:2:4 Type ( using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Ditto all as per Item No 52 here-in-above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.
Use and waste for form work (square, rectangular or polygonal) to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished surface of concrete, flat, complete all as specified and as directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.
S&F pillar taps(ISI marked) , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for 15mm dia iron pipes and fixed complete all as specified and directed.
S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.
S&F brass chromium plated shop dish any size any type complete all as specified and directed
S&F vitreous china wash basin white, flat back of size 450x300mm including 32mm dia PVC waste pipe CP brass waste coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S & F Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia., and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and directed
S&F shelf of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats ( min weight 300 gms).
S & F 10 Ltr PVC flushing cistern , low level, white with inlet , ball, valve , float and handle including brackets , flush pipe & 600 mm long 15 m dia PVC connection complete all specified and directed
S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.
S & F 15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 15mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F PVC false ceiling consisting of 600mmX600mm, 3mm thick prelaminated design PVC sheet of density 600kg/cm solid PVC panel insert in a frame work made using anodizes aluminium T section of size 1''X1'' (25 X 25mm), 19 gauge or 1mm thick in square pattern of grid size 2'' X 2'' (600 X600 mm). The aluminium frame work is supported from the ceiling with the hook of GI wire 6mm MS rods of required size to mantain for proper level etc. The aluminium frame work is supported on side wall with the use of aluminium 1'' X 1'' (25X25mm) angle complete all as specified and directed by Engr-in-Charge, manufacture's specification & drawing.
S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
S & F Ball (ISI marked) brass valves, high pressure,with polythene float and flynut, screwed for 20mm dia iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) with access door equal or unequal complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (Single T) with access door equal or unequal complete all as specified and directed.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed.
S&F 110mm bore PVC (SWR) reducers complete all as specified and directed.
M&L for PVC (SWR) vent cowl of bore 75mm complete all as specified and directed.
S&F PVC (SWR) WC connector with lip ring 110 mm. complete all as specified and directed.
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 22 x22 x0.35mm and main/cross tee of size 24 x38 x0.35mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in soft/loose soil complete all as specified and directed.
M & L for Cutting chases, pinning in, making good to facings of brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed water conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as speicified and directed.
M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed.
M & L for PCC 1:3:6 Type C2 using 40 mm graded aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases).complete all as specified and directed.
S&F MS angle iron as in posts and struts as in fencing including cutting tops to shape as directed, drilled holes notching for wire etc incl all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165.complete all as specified and directed.
S & F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends each screwed end be fitted with washers and one hexagonal or square nut exc 5 cm but n.exc 10 cm long and dia of shank 11 to 15 mm complete all as specified and as directed.
S & F 4mm dia Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured).complete all as specified and directed.
Material and labour for point wiring surface type with two single core 4 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 2.5 Sq mm complete all as specified and directed for one 5 pin 15 Amps socket out let :- (Colour code to be followed) complete all as specified.
S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.
S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.
All as per item No.111 here in below but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
Drilling and tapping cast iron water mains (in position) for branch connections of 15mm internal dia complete all as specifed and directed.
S&F 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F storage type electric water heater of 25 Ltrs capacity, 240 Volts, rated input 1.5 KW, PUF insulated fitted with stainless inner container and copper coil of BEE rating 5 star models, max working head of water 60 Ltrs, fixed to wall with suitable MS tower/anchor bolts, inlet/outlet pipe, grouted to wall.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
S & F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC taper and over all PVC sheathed in service connections suspended by insulating hangers not more than one meter apart inlcuding 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light point controlled by one, one way switch
One ceiling/exhaust fan point controlled by one, one way switch complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular white cover plate with frame for fixing 8 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing 6 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing 3 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing 2 module complete all as specified and directed.
S&F blank speacer plate for single module.complete all as specified and directed.
Supply and fixing LED lights fitting 1x20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fix exhaust fan made of sturdy engeineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm.complete all as specified and directed.
M & L Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Required Earth strip quoted under unit rate)
APPLE CONSTRUCTION
M/S N JADUMANI SINGH
M/s RS Enterprises & Supplier
M/S BIJOYA LAXMI ENTERPRISE
SHARMA ENTERPRISE
M/S PRADEEP CONSTRUCTION
MAURYA CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .