752747 A ADDN ALTN TO CERTAIN MD ACCN AT RANCHI

Amount

SCHEDULE "A" :

Item No 01:- Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Item No 02 :- Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Item No 03 :- M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Item No 04 : Brick work with sub class 'B' bricks straight or curved on plan ec 6m mean radius built in cement mortar 1:6 using old bricks as retrieved against item no:2 here-in-before, all as specified.

Item No 05 :.M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and finish even and smooth with-out using extra cement complete all as specified and directed

Item No 06 : M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

Item No 07 : M&L for plasting on fair faces of brick work or concrete surface of wall 15mm thick (10mm+5mm) in two layers in CM 1:4 with using integral WPC admixture @ 200 ml per 50 Kg cement in top layer and to be finished even and smooth with out using extra cement complete all as specified and directed (Note:- WPC admixture shall be measured and paid seperately)

Item No 08 : M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .

Item No 09 : - Supply only liquid water proofing compound as per manufacturer instruction.

Item No 10 :- preparation of new plastered surface and applying one & more coat of white putty 1mm thick on wall surfaces all as specified and directed. (Make : Birla, JK)

Item No 11 :- complete removal of existing treatment on wall and applying one coat of white putty min 1mm thick on wall surfaces all as specified and directed. (Make : Birla, JK)

Item No 12 :- Applying two coats of acrylic distemper on newly plastered/putting surfaces of walls complete all as specified and directed.

Item No 13 : M&L for complete removal of existing treatment of walls and applying two coats of acrylic distemper over a coat of primer complete all as specified and directed.

Item No 14 : M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

Item No. 15 - M&L for preparation of old decorated surfaces of walls and apply one coat of white wash complete all as specified and directed

Item No. 16 :- M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed.

Item No. 17 :- M&L for preparation of old plastered surfaces of ceilings and apply one coat of white wash complete all as specified and directed.

Item No. 18 :- M&L for Preparation of newly plastered surfaces of walls/chajja/lintel and applying two coats of exterior acrylic emulsion paint (Apex or equivalent in berger, Johnson Nicholson, paint white or tinted) over a coat of alkali resistant primer complete all as specified and directed.

Item No. 19 :- M&L for complete removal of existing surface of walls any description by washing, rubbing down and applying two coats of acrylic emulsion weather coat paint over a coat of alkali resistant primer complete all as specified and directed.

Item No 20:- Taking up or down steel tubing and connections for 15 mm bore of pipe complete all as specified and directed.

Item No 21 :- S&F GI tubes medium grade 15 mm bore with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed

Item No 22 :- Refixing old water tubing 15mm bore any grade to walls and ceiling or laying in floors with new fitting and fixed including cleaning of old pipe complete all as specified and directed

Item No 23 : Taking up or down steel tubing 20 mm bore and connections complete all as specified and directed.

Item No 24 :.S&F GI tubes medium grade 20 mm bore with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed

Item No 25 : Refixing old water tubing 20mm bore any grade to walls and ceiling or laying in floors with new fitting and fixed including cleaning of old pipe complete all as specified and directed.

Item No 26 : S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20mm bore, screwed both ends for iron pipe all as specified.

Item No 27 : Taking down existing roof treatment of any description complete all as specified and directed.

Item No 28 : - Dismantling brick tiles or terracing tiles / roof covering material single layer on roofs complete all as specified.

Item No 29 : - Scrapping surfaces of roof by wire brushing and removing all loose dust, cleaning and washing down with water complete all as directed.

Item No 30 :- M&L for 10 mm thick plaster in cement mortor 1:3 laid over roof with integral water proofing admixture @ 200 ml per 50 kgs of cement (after the surface is cured the roof will be tested for water tightness by ponding with water for seven days of any seepage/leakage etc.) Note :- supply only water proofing admixture shall be measured and paid separately.

Item No 31 :- M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

Item No 32 : M&L Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed.

Item No 33 : M&L for two coats of bituminous based aluminum paint on APP membrane all as specified and directed.

Item No 34 : M&L for 20mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes finish even and fair complete all as specified and directed.

Item No. 35 - M&L for 20mm thick machine cut & polished cement concrete tiles factory made with grey cement without pigment of size 250mm x 250mm laid in neat cement slurry over screed bed and tiles properly laid with 3mm wide joints filled with FEVIMATE TG of Dr Fixit or tile glue or as per manufacturer instructions complete as specified and directed.

Item No. 36 :- PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed.

Item No. 37 :- M&L Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in landing, coverslab, chulah hood, chajja, shelves and similar item and set in CM 1:6 complete all as specified and directed.

Item No. 38 :- M&L cement concrete Type B0 1:2:4 in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.

Item No. 39 :- Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.

Item No. 40 :- Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.

Item No 41 : Taking down shutters of any description not exc 1.00 Sqm each complete all as specified and directed.

Item No. 42 - Taking down shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed.

Item No. 43 :- Refixing of shutter of any description exc 1.00 Sqm but not exc 2.00 Sqm each in same opening complete all as specified and directed.

Item No. 44 :- S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

Item No. 45 :- S&F anodised aluminium shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. Note-(i) All aluminum section and fitting shall be anodised coated 15 micron and shall conform to IS 1868 - 1996, testing of anodizing coating shall be in accordance with IS 5523-1983. (ii)Glass and other filling material in panels shall be measured and paid seperately

Item No. 46 :- S&F anodised aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed. Note-(i) All aluminum section and fitting shall be anodised coated 15 micron and shall conform to IS 1868 - 1996, testing of anodizing coating shall be in accordance with IS 5523-1983. (ii)Glass and other filling material in panels shall be measured and paid seperately

Item No. 47 :- S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Item No. 48 :- S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Item No. 49 :- S&F figured glass 4 mm thick, pin head type and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and directed

Item No. 50 :- Blank

Item No. 51 :- S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Item No. 52 :- S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

Item No. 53 :- S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

Item No. 54 :- S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

Item No. 55 :- M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specified and directed.

Item No. 56 :- M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (a) complete all as specified and directed.

Item No. 57 :- Blank

Item No. 58 :- S&F 35 mm Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Item No. 59 :- S&F steel windows with side hung shutters including Box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

Item No. 60 :- S&F steel windows with side hung shutters including Box type hinges with steel handle, and steel peg stay complete with out glazing bars, dovetailed or welded complete all as specified and directed.

Item No. 61 :- Blank

Item No. 62 :- S&F block boards 18/19mm thick grade 2 quality, exterior grade, commercial type for cupboard shutter, shelf, etc complete

Item No. 63 :- S&F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

Item No. 64 :- M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Item No. 65 :- S & F teak wood leaping 6mm thick fixed with nail complete all as specified & directed.

Item No. 66 :- S&F aluminium, anodised, barrel tower bolts of extruded section 200 mm long ISI Marked complete all as specified and directed.

Item No. 67 :- S&F aluminium handles cast type anodised of 150 mm size ISI Marked complete all as specified and directed.

Item No. 68 :- S&F aluminium handles cast type anodised of 125 mm size ISI Marked complete all as specified and directed.

Item No. 69 :- S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long ISI Marked complete all as specified and directed.

Item No. 70 :- S&F 100 mm butt hinges, cast brass with mild steel, bright polished and fixed, type B-12 ISI Marked complete all as specified and directed.

Item No. 71 :- S&F Butt hinges, medium weight, cold rolled mild steel 75 mm long ISI Marked complete all as specified and directed.

Item No. 72 :- S&F 100 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Item No. 73 :- S&F of Magnet catcher with nuts and screw of mild steel bright finish all as specified and directed.

Item No. 74 :- S&F mild steel Drawer handle projection drop 50mm to 65 mm on screw plate complete.

Item No. 75 :- S&F Magic Eyes for doors complete.

Item No. 76 :- S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt ISI Marked complete all as specified and directed.

Item No. 77 :- S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate ISI Marked complete all as specified and directed.

Item No. 78 :- S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 150 mm ISI Marked complete all as specified and directed.

Item No. 79 :- S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.

Item No. 80 :- M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

Item No. 81 :- M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No. 82 :- M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Item No. 83 :- M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Item No. 84 :- S&F in repair 40mm dia cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished

Item No. 85 :- S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed.

Item No. 86 :- S&F pressed steel frames of size 165 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed.

Item No. 87 :- Blank

Item No. 88 :- Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

Item No. 89 :- Blank

Item No. 90 :- Blank

Item No. 91 :- M&L for coloured joints free non skid ceramic tiles, 6 to 7 mm thick, jointless, area of each tile exc 0.11 but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified.

Item No. 92 :- All as per Item No 91 but as in Skirting with 10mm thick rendering in CM 1:3

Item No. 93 :- M&L for 9-10 mm thick dark coloured double charged vitrified tiles of size, 600 x 600mm in floors set & jointed in neat cement slurry and pointed in coloured cement to catch over & including 15 mm thick screed bed in CM 1:6 complete all as specified & directed.

Item No. 94 :- All as per item No 93 but as in Skirting with 10mm thick rendering in CM 1:3 complete all as specified & directed.

Item No. 95 :- M&L for glazed joint less ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and 10 mm thick in cement mortor 1:3 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

Item No. 96 :- M&L for 18 to 20 mm thick granite (best quality), as in cooking plateform etc set in CM 1:4 including pointing in white cement (1:2 using marble dust with admixture of pigment ot match with shade of granite) over in including 20mm thick bedding layer in CM 1:6 and grinding and polishing and rounding / moulding the edges complete all as specified and directed.

Item No. 97 :- M&L for 18 - 20 mm thick Machine cut Kota stone slab flooring over cement screed bed 20mm thick in CM 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing grinding, rounding/ moulding the edges complete all as specified and directed.

Item No. 98 :- M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Item No. 99 :- Blank

Item No. 100 :- Disconnecting existing tanks, setting aside or lowering if required for repairs, cleaning etc and hoisting if required reconnecting and refixing in position( cleaning repairing, etc measured separately) capacity of tank exc 250 litres but not exc 500 litres complete all as specified and directed.

Item No. 101 :- Dismantling water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed.

Item No. 102 :- Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish from site complete all as specified and directed.

Item No. 103 :- S & F three layer ISI Marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed

Item No. 104 :- S & F three layer ISI Marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top)1000 litre capacity hoisted and fixed in position complete all as specified and directed

Item No. 105 :- S&F Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 25 mm bore dia of pipe complete all as specified and directed.

Item No. 106 :- M&L for repairing broken edges of chajja's roof projection, Fascias etc. In small widths/depths (exposed area exc 0.05 sqm but n exc 0.10 sqm) by breaking the cracked/loose portion and filling with Cement Mortar/Plain Cement Concrete 1:2:4, Type B-0, using 12.5 mm crushed stone aggregates, over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisiting surfaces incl removing debris, necessary scaffolding, etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately)

Item No. 107 :- All as per ser item No. 106 above herein before but exposed area exc 0.10 Sqm but not exc 0.16 Sqm.

Item No. 108 :- M&L for repair and rendering 10mm thick in cm 1:3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of visible reinforcement and trating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 type B-0 using 12.5 mm graded aggregate including necessary scafolding work for double / single storey bldgs all as directed.

Item No. 109 :- Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 110 :- Mild Steel TMT bar 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 111 :- S&F of white/colour PVC Cabinet Mirror of size 350mm X 450 mm of make PRAYAG CAT PART NO. 557 or equivalent of approved make.

Item No. 112 :- S&F Viterous china wash basin, white, flat back, of size 550X400mm with CP waste coupling, and PVC waste pipe and including fixing brackets, complete fixed as in repairs.(Make Hindware Cat part No. star white 10008 or equivalent of approved Make).

Item No. 113 :- Blank

Item No. 114 :- Blank

Item No. 115 :- S&F CP Brass Towel Rack 450mm with lower hangers fix to wall complete all as specified and directed. (Make JAGUAR Cat part No.AQN-7781B or equivalent of approved Make).

Item No. 116 :- S&F in repair Towel Rail chromium plated D Type of 20 mm dia 600mm long fixed with and including Chromium plated brass screws and wooden/ plastic cleats incl brackets.(Make JAGUAR Cat part No.ACN-1111BNM or equivalent of approved Make).

Item No. 117 :- S&F CP Soap Dish holder fixed to wall with plugs and brass chromium plated screws . (Make JAGUAR Cat part No.AKP-35731P or equivalent of approved Make).

Item No. 118 :- Blank

Item No. 119 :- Brass CP toilet paper holder fixed to wall with plugs and brass chromium plated screws. (Make JAGUAR Cat part No AKP-35751P or equivalent of approved Make).

Item No. 120 :- S & F Chromium plated mixture cock for wash hand basin for hot and cold water of copper allo with long shank inlets suitable for 15mm bore connections complete all as specified and directed. (Make JAGUAR Cat part No CQT-23167B or equivalent of approved Make).

Item No. 121 :- Blank

Item No. 122 :- S & F in repair kitchen plate rack made of stainless steel 787 X 914 X 254mm size fixing with wooden plug with suitable size of screws complete all as specified. (Make PRAYAG Cat part No P348 or equivalent of approved Make).

Item No. 123 :- S & F in repair kitchen plate rack made of stainless steel 787 X 605 X 254 mm size fixing with wooden plug with suitable size of screws complete all as specified.(Make PRAYAG Cat part No P340 or equivalent of approved Make).

Item No. 124 :- S&F in repair 15 mm bore bib tap long body cast copper alloy CP fancy type with capstan head hendle, screwed down, screwed for brass feffule and fixed. (Make PRAYAG Cat part No 9208 or equivalent of approved Make).

Item No. 125 :- S&F 15 mm bore chromium plated nozzel for RO connection complete

Item No. 126 :- S&F for 15mm dia CP wall mixer 3 in 1 for mixing hot & cold water with L bend (provision for over head shower) screwed down for iron pipe complete all as specified and directed.(Make JAGUAR Cat part No CON-281KN or equivalent of approved Make).

Item No. 127 :- S&F in repair Vitreous china wash down closet pan (pedestal pattern). White (excluding fixing bolt, flushing cistern and flush pipe ) but including P or S trap & incl seat cover of white colour all as directed and specified.(Make HINDWARE Cat part No 20011 or equivalent of approved Make).

Item No. 128 :- S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P" or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete.(Make HINDWARE Cat part No 20076 ACUPAN or equivalent of approved Make).

Item No. 129 :- S&F in repair chromium plated health faucet ABS with 1.2 metre flexible tube and wall hook for EWC all as specified and directed by EIC.(Make HINDWARE Cat part No H726501 or equivalent of approved Make).

Item No. 130 :- S&F PVC 10 litres capacity valveless, syphonic action type low level flushing cistern, white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed.(Make HINDWARE Cat part No 511209 or equivalent of approved Make).

Item No. 131 :- S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes pipe including wastes coupling of suitable size including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914 mm x 460 mm bowl size 405 mm x 354 mm x 203 mm complete all as specified and directed.(Make PRAYAG Cat part No 1239D or equivalent of approved Make).

Item No. 132 :- S&F in repairs shower rose brass chromium plated with swivel joints of size 125 mm dia over head shower with 225 mm flange cast copper alloy CP, fancy type with CP neck 6" long made to shape complete.(Make PRAYAG Cat part No BS76 or equivalent of approved Make).

Item No. 133 :- Mild steel Powder coated pipes 25mm dia with wall thickness 16 gauge, with fixing brackets stops, roller etc. in curtain rods fixed in repairs complete all as specified and directed.

Item No. 134 :- S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball nt less than 50mm and suitable for curtain rod of 20mm dia complete.

Item No. 135 :- S&F PVC connection 15 mm size with PTMT nuts of length 450 mm for hot and cold complete all as specified and directed.(Make PRAYAG or equivalent of approved Make).

Item No. 136 :- S&F PVC connection 15 mm size with PTMT nuts of length 600 mm for hot and cold complete all as specified and directed.(Make PRAYAG or equivalent of approved Make).

Item No. 137 :- S&F in repair connection 15 mm dia bore brass stop cock (concealed type), with long shank and cup high pressure with capstan head screwed both ends for iron pipe or for unions.(Make PRAYAG Cat Part No. 7318 or equivalent of approved Make).

Item No. 138 :- S&F Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified. (Make PRAYAG Cat Part No. PIS-10H or equivalent of approved Make).

Item No. 139 :- M&L Broken stone hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Item No. 140 :- M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate in floor finished even and fair for bedding of tiles including necessary form work complete all as specified and directed.

Item No. 141 :- Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

Item No. 142 :- Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:3 cement sand mortar with integral water proofing admixture @ 200ml per 50 Kg of cement both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified. (IWP admixture shall be paid separately)

Item No. 143 :- M & L for PCC 1:5:10 using 40 to 60 mm size brick aggregate as in filling of sunken portion complete all as specified.

Item No. 144 :- M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

Item No. 145 :- M&L for 40 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed. Note: Water Proofing Compound shall be easured and paid separately.

Item No. 146 to 149 :- Blank

Item No. 150 :- M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints using solvent adhesives fixed to walls of 110 mm outer dia of pipe etc complete all as specified and directed.

Item No. 151 :- M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc complete all as specified and directed.

Item No. 152 :- S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

Item No. 153 :- S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

Item No. 154 :- S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

Item No. 155 :- S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 110 mm bore with access door

Item No. 156 :- S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

Item No. 157 :- S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

Item No. 158 :- S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 75 mm bore with access door.

Item No. 159 :- S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

Item No. 160 :- M&L PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed

Item No. 161 :- Taking down of eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

Item No. 162 :- 110mm dia PVC (SWR) rain water pipes single pipes single socketed in any length with rubber ring joints fixed to walls with and including stack clamps made cut of 40mm by 3mm FI and 12mm dia round iron stays and making good the disturbed portion in CM 1:3 to match with surrounding area, complete all as specified and directed.

Item No. 163 :- M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

Item No. 164 :- S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

Item No. 165 :- S&F SP Sink with mixture with regular spout hot and cold arrangement long shank suitable for GI tubing complete all as specified and directed. (Make : PRAYAG Cat part No 8355 or equivalent of approved make)

Item No. 166 :-M&L for SGSW gully trap 150 x 150 mm square or round mouthed type 'P' complete all as specified and directed.

Item No. 167 :- S&F in repair waste coupling of PTMT (half or full threaded) for 32mm dia complete all as specified and directed.

Item No. 168 :- S&F grating doom 100 mm dia of PTMT (minimum weight 25 grams) complete all as specified and directed.

Item No. 169 :- M&L for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.

Item No. 170 :- M&L for treatment of soil using emuision for post construction Anti termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed.

Item No. 171 :- M&L for post construction Anti termite treatment at point of contact of wood work by chemical emulsion (in oil or Kerosene based solution) @ 0.50 litre / hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

INTERNAL ELECTRIFICATION Item No. 172 :- Taking down copper / aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit and making good distrubed surfaces of walls, floors etc. complete all as specified and directed.

Item No. 173 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN / Main Switch including old unserviceable MCCBs /MCBs, Isolators, etc and making good to disturbed surface all as specified and directed.

Item No. 174 :- Taking down carefully copper/aluminium Sub main wiring of any size from surface /concealed /existing conduit of any height and removing materials at size and making good disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Item No. 175 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-894 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with sunk in anodized pressed steel box 1.6 mm thick, 60mm deep for housing switch socket etc with white laminated 3 mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incl cutting, chases and making good disturbed surface to match with existing finish with plaster for complete all as specified and directed by Engr-in-charge

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch one the same board.

(e) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board.

(f) One bell point controlled by one, bell switch 5 Amps

Item No. 176 :- Description all as per item No 175 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 177 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories, heavy duty, ISI marked after chasing in wall/ceiling etc, with GI sunken boxes 1.2 mm thick, 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and makig good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following.

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on independent boad.

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(f) One bell point controlled by one, bell switch 5 Amps

Item No. 178 :- Description all as per item No 177 here in before but using 2.5 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Item No. 179 :- Description all as per item No 177 here in before but using 4.0 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. (for AC Point)

Item No. 180 :- S&F Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed.

Item No. 181 :- S & F switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed.

Item No. 182 :- S&F Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed.

Item No. 183 :- S & F switch bell push piano type 5 Amp, 230 Volts complete all as specified and directed.

Item No. 184 :- S & F socket outlet 2 in 1, 5 pin 5 Amps 230 Volts complete all as specified and directed.

Item No. 185 :- S & F socket outlet 2-in-1, 6 pin 5 Amps & 15 Amps, 230 Volts complete all as specified and directed.

Item No. 186 :- S&F Ceiling rose, surface Bakelite with 3 terminals. ISI marked for batten fitting complete all as specified and directed.

Item No. 187 :- S & F stepped type electronic fan regulator flush Type complete all as specified and directed.

Item No. 188 :- S & F Modular Switch piano fush type, single pole, one way and 5/6 Amp single module complete all as specified.

Item No. 189 :- S & F Modular Switch piano fush type, single pole, one way and 15/16 Amp single module complete all as specified.

Item No. 190 :- S & F Modular Switch piano fush type, single pole, two way and 5/6 Amp single module complete all as specified.

Item No. 191 :- S & F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

Item No. 192 :- S & F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

Item No. 193 :- S & F Modular step type fan regulator 120 watt 2 module suitable for 230 Volt 50 Hz AC supply compelte all as specified and directed

Item No. 194 :- S&F Bell push modular 6 Amps single module complete all as specified.

Item No. 195 :- S & F lamp holder, PVC / Polycarbonate type with back plate suitable for batten / slanting fittings complete all as specified and directed.

Item No. 196 :- S & F Bell Electric Ding dong type suitable for operation on 230 volt 50 Hz A C supply complete all as specified and directed.

Item No. 197 :- M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked concealed in wall etc one run of PVC insulated 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit)

Item No. 198 :- M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked concealed in wall etc two run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit)

Item No. 199 :- S&F sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 200 :- S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and directed.

Item No. 201 :- S & F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

Item No. 202 :- S & F MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 203 :- S & F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 204 :- S & F metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed.

Item No. 205 :- S & F Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct to fit lamp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed.

Item No. 206 :- S & F Decorative wall mounted luminaire made our of polycarbonate with unbreakable globe suitable for LED bulb and including provision of LED bulb 10 Watts complete all as specified and directed. (Make Havells Cat Part No LHDL 06160099 or its equivalent in philips, Bajaj.)

Item No. 207 :- S & F LED 10 Watts batten aluminium extruded with decorative end caps complete all as specified and as directed. (Make- Bajaj Cat Part No BCLSB 10 WH or its equivalent model in Wipro, Philips)

Item No. 208 :- S & F Energy saving new generation 10 Watts LED bulk head fitting IP-65 luminaire with opel diffuser pre wired, with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 form ceiling rose to fitting including LED bulb complete all as directed. (Make :- Bajaj Cat No. BIBWP 10W LED or its equivalent in Philips, Wipro)

Item No. 209 :- S & F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. (Make:- Bajaj Cat Part No BCLAB 20 W, Wipro Cat part No LL20-281-XXX065-ALI or its equivalent in philips/Havells)

Item No. 210 :- S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired, warranty option of 5 years from date of installation and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge. (Make :- Bajaj Cat Part No BRLEP 25W LED(Edge plus series) or its equivalent in Philips, wipro).

Item No. 211 :- Taking down ceiling fan/exhaust fan of any sweep, keeping with safe custody and refixing the same with replacement of UNSV 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan, spray painting the fan body & wings with two coats of synthetic enamel paint of white colour complete all as specified and directed.

Item No. 212 :- S & F for Energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan base complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Item No. 213 :- Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.00 m (height) x 1.00 m (breadth) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos Three phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 Sqmm copper wire complete all as directed by Engineer-in-Charge. (For Officers G+1 Md Accn)

OUTGOING (a) MCB, Tripple pole & neutral, 40 amps, 415 volts, 'C' curve, 10 KA all complete as specified and as directed - 4Nos (Officers Accn) (b) MCB, single pole & neutral, 10 amps, 415 volts, 'C' curve, 10 KA all complete as specified and as directed- 1 No (Stair case lighting). (c) Single Phase Electronic Energy Meter accuracy class 1.0,240 V with in-home display 5-30 A, 3 Nos self locking meter seal, LCD display optical port, anti temper features, LCD test, serial no. Date, RTC, Cumulative Kwh, Instantanous Load, Last bill MD, Instantanous KW, Volts, PF, HZ, MD, total Tamper Count, Self billing code, battery backup in absence of power for display active energy KWH, including all incoming and out going connections. -01 No. (Make L&T Cat No. WM 101BC5DDH /Secure)

(d) Supply and fixing of Three Phase Electronic Energy Meter accuracy Class 1.0, 415V, with in-home display 10-60A, 3 Nos self locking meter seal, LCD diplay with optical port, anti temper features, LCD test, serial no, Date, RTC, Cumulative Kwh, Last bill Kwh, Instanteous Load, Last bill MD, Instantaneous KW, Volts, PF, HZ, MD total Tamper Count, Self billing Code, Battery backup in absence of power for diaplay active energy kwh, including all incoming and out going connections. = 04 Nos. (Make- L&T Cat No. WR301BC7D10/Secure)

Item No. 214 :- Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos single phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 Sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as directed by Engineer-in-Charge. (For JCO/ORs G+1 Bldg)

OUTGOING (a) MCB, Tripple pole & neutral, 40 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 5Nos (Officers Accn) (b) Fixing only serviceable existing electric meter-04 Nos

Item No. 215 :- Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos single phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 Sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as directed by Engineer-in-Charge. (For JCO/ORs G+3 Md Accn)

OUTGOING (a) MCB, Tripple pole & neutral, 40 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 9 Nos (b) Fixing only serviceable existing electric meter-07/08 Nos

Item No. 216 :- Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed

Item No. 217:- Returning, filling in including necessary spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soils.

Item No. 218 :- Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Item No. 219:- Supply & Laying well burnt Bricks, locally available best quality (Sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified.

Item No. 220 :- Supply, spread and filling approved sand in cable trenches for cushioning of LT UG cable all as specified. Note:- Punned thickness only will be measured and paid.

Item No. 221 :- Supply & lay GI tubing light grade in protection of cable at road at road crossing/hard standing/pole protection fixed with clamps as per site requirement etc of following sizea complete all as specified and directed.

(a) 40 mm dia bore

(b) 25 mm dia bore

Item No. 222 :- Supply laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of following sizes complete all as specified and directed.

(a) 4 Core x 16 Sqmm

(b) 4 Core x 25 Sqmm

(c) 3.5 Core x 35 Sqmm

Item No. 223 :- M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part -I including excavation and earthwork in any type of soil/strata and testing on completion Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 1252440.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

Vp sanjiv

SOOD ASSOCIATES PVT LTD

SATYA PRAKASH BUILDERS LTD