PROVN OF ROAD IN CAMP AWC UNDER GE AWC MHOW

Amount

M&L earthwork in excavation by mechanical means (hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 Sqm on plan) in all kind of soil including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m as directed by Engineer in charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.

M&L rolling over formation surfaces by 8-12 to power roller (static and vibratory) in cutting surface to achieve field compaction at least to 98% of modified proctor density of existing soil complete all as specified and directed.

M&L for moorum/Red bajri fillings in floors or pavings laid in layers n.exc 15cm thick of quarried stone, interstices filled, surfaces formed and rolled and consolidated to required gradient and camber 150 mm thick GSB in two layers of 75 mm each (compacted thickness) complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in sub base/sub floor/pavings complete all as specified and directed.

M&L for 200mm thick cement concrete work in pavement/hardstanding of flexural strength 40 Kg per square centimeter in field using minimum 400Kg of cement per cubic meter thickness of concrete 25cm or less including cutting of joints complete all as specified in the respective clause of SSR Part-I and directed.

M&L for finishing the surface of concrete roads and pavements by belting complete all as specified and directed.

M&L for forming contraction joints 65mm deep x 10mm wide filled with sealing compound, complete all as specified and directed.

M&L for forming 12mm thick Expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' concrete thickness 200mm complete all as specified and directed.

M&L polythene film black 50 micron laid floors and pavings complete all as specified and directed.

M&L for form work to sides of concrete for fair finished flat surfaces of concrete complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape as required incl cracking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L for laying of 300mm reinforced concrete pipes class NP2 laid and jointed complete all as specified and directed.

M/S UnitedConstruction (BID ID -3149267)

BHATIA ASSOCIATES (BID ID -3157969)