providing elect S/L and 11 mtr. long solar high mast in front of SCO No. 325 to 352 in S/C sector-29 Gurugram. S/E of PCC poles, ACSR conductor 200 KVA T/F and 11 mtr. long solar high mast in front of SCO 325 To 352 in S/C sector-29 Gurugram

[13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

[13.32]Providing and fixing bolts including nuts and washers complete.

[24.1.2]EARTHING AND LIGHTENING ARRESTOR. Extra for using salt and char coal/coke for pipe earth electrode as required.

[24.1.6]EARTHING AND LIGHTENING ARRESTOR. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.

[24.3.4.2]HT CABLE. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 150 to 185 sqmm

6.1.1) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

[24.13.62]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK. 95 Sq mm 3.5 core (Arm.)

[24.16.7]HT CABLES (Aluminium Conductor, Armoured and Unarmoured) Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in Existing Pipe/Trenches/Surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 7. Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in Existing Pipe/Trenches/Surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 185 Sq mm 3 core

NS) Supply and erection of PCC pole as per IS: 1678-1960 specification, 9mtr long PCC pole 105mmx115mm at top and 105mm x315mm at bottom with working load of 200 kg buried 1.5 in ground as per DHBVNL specification.

NS) Supply and erection of PCC pole as per IS: 1678-1960 specification, 11 mtr long 152mm x203mm at top and 152mm x368mm at bottom with working load of 360kg buried 1.8 in ground as per DHBVNL specification.