Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2.0 L
Closing Date
9 Sept 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar Nature of Work: Work of supply, installation, testing and commissioning of Sub-station (with or without supply of transformers / sub-station equipment) for 11KV or above, with at least 50% capacity of the proposed sub-station kVA rating
27 conditions · 3 needing a document upload
Uploading of Scanned copy of Statement of Bank details, PAN & GST.
Compliance with Public Procurement (Preference to Make in India) Policy: This tender complies with Public Procurement (Preference to Make in India), Order 2017-Revision dated19.07.2024 of Department of Promotion of Industry and Internal Trade, Ministry of Commerce and Industry, Govt. of India (herein referred to as PP-PIM), circulated vide Ministry of Railways (Railway Board)'s letter No.2020/RS(G)/779/2/Pt.1 (E3322671) dated 20.08.2024, and all its amendments. Only Class-I local suppliers (as defined in PP-PIM) shall be eligible to bid for list of items specified in Ministry of Railways (Railway Board)'s letter no.2025/RS(G)/779/3 (E3488356) dated 02.05.2025. For other items, only Class-I and Class-II local suppliers are eligible to bid. At the time of bidding, each bidder is required to indicate percentage of local content (as defined in PP-PIM) and provide self-certification that the item offered meets the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be. If this self-certification is not submitted, the bid will be summarily rejected. For contracts above Rs.10 crores, the provisions of Para 9(c) of PP-PIM shall be additionally applicable. For the purposes of this NIT, the "local content" (asdefined in PP-PIM) requirement to categorize a supplier as "Class-I local supplier" is minimum 50% and for "Class-II local supplier" is minimum 20%. Also, the Margin of PurchasePreference (as defined in PP-PIM) is 20%. The procedure for preference to Make in India shall be as specified in PP-PIM. Uploading of self-certificate for meeting the local contentrequirement for "Class-I local supplier"/"Class-II local supplier", as the case may be (proforma attached). Non- submission of this certificate will lead to summary rejection of bid. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
MYS Augmentation of Mechanised Laundry from 3.5 Ton to 7 Ton / Day capacity.
Y-E-29-2026-27-72~SWR
Y-E-29-2026-27-72
Open
Works - General
180 Days
Dharwad, Karnataka
₹0
₹2.0 L
18 Aug 2026
18 Aug 2026
26 Aug 2026
169 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 13,72,021 | ||
| — | 50.00 | — | — | ||
| Excavation of cable trench, 450 mm. wide and 1000 mm. deep in all types of soil and refilling the cable trench to original shape by excavated soil free from unwanted materials. | — | — | — | 7,321.5 | |
| — | 10.00 | — | — | ||
| Platform surface/concrete/Road cutting for excavation of cable trench 300 mm wide x 300 deep, re-fitting of soil and re-plastering of excavated trench with cement on the PF's to bring original shape. | — | — | — | 5,988.9 | |
| — | 300.00 | — | — | ||
| Laying of 4x10 - 35 Sq mm LTUG cable with aluminium conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 2,619 | |
| — | 100.00 | — | — | ||
| Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 35 sq. mm and up to 95 sq. mm (clamped with 40x3mm MS flat clamp) size on wall surface as required. | — | — | — | 13,000 | |
| — | 50.00 | — | — | ||
| Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Above 95 sq. mm and up to 185 sq. mm size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. | — | — | — | 8,050 | |
| — | 150.00 | — | — | ||
| Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Above 95 sq. mm and up to 185 sq. mm (clamped with 40x3mm MS flat clamp) size on wall surface as required. | — | — | — | 33,900 | |
| — | 200.00 | — | — | ||
| Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Above 185 sq. mm and up to 400 sq. mm size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. | — | — | — | 42,600 | |
| — | 50.00 | — | — | ||
| Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 185 sq. mm and up to 400 sq. mm (clamped with 40x3mm MS flat clamp) size on wall surface as required. | — | — | — | 11,300 | |
| — | 3.00 | — | — | ||
| Brass compression gland suitable for 70 sq. mm 1.1 KV grade cable. | — | — | — | 333 | |
| — | 3.00 | — | — | ||
| Brass compression gland Suitable for 150 sq. mm 1.1 KV grade cable. | — | — | — | 641.25 | |
| — | 3.00 | — | — | ||
| Brass compression gland Suitable for 185 sq. mm 1.1 KV grade cable. | — | — | — | 821.25 | |
| — | 3.00 | — | — | ||
| Brass compression gland Suitable for 400 sq. mm 1.1 KV grade cable. | — | — | — | 1,653.75 | |
| — | 30.00 | — | — | ||
| Supply and Fixing of GI pipe 'B' class of dia 50 mm. for cable rising & protection including clamping, fixing arrangements and sealing with bituminous compound. | — | — | — | 22,782.3 | |
| — | 100.00 | — | — | ||
| Supply and laying of HDPE pipe of dia 110 mm grade PE-100 with pressure of PN 8 for safety of cables. | — | — | — | 42,171 | |
| — | 12.00 | — | — | ||
| L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtr length, soil treatment by spreading of 25 kgs each of salt and charcoal, duly painting earth pit with black paint and stencilling of earth resistance value with date, including supply and laying of 6 SWG G.I. wire and other hardware to connect equipment at site complete. | — | — | — | 65,232.12 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning of 250 W LED Luminaire for Flood Light similar to Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC- 511687757134256 dt.06/06/2024) | — | — | — | 25,104.5 | |
| — | 14.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED Flood Light, Power 150 Watt similar to Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC- 511687742946376 dt.07/06/2023). Including all other required accessories complete. | — | — | — | 40,072.9 | |
| — | 6.00 | — | — | ||
| Supply, fixing, connection and testing of air circulator wall mounting brackets fan blade 600 mm sweep of Crompton greaves price catalogue no AC600WALL-1or equivalent with fixing up at suitable height with foundation bolt and clamp asper requirement having suitable ratings MCB with steel enclosure for ON/OFF. | — | — | — | 57,492 | |
| — | 6.00 | — | — | ||
| Supply, Erection, testing and commissioning of Heavy-Duty Exhaust Fans, 300 mm, 1400 RPM suitable for 230V, 50Hz, AC supply, with accessories and Aluminium Louver Shutter for Exhaust Fan suitable for fan size 300 mm etc. | — | — | — | 22,476 | |
| — | 4.00 | — | — | ||
| Supply of Digital Time Switches for Tower Light, Pump Installations & Street Light Circuits etc. Floor/Panel/Tower/Wall mounted, Supply Voltage 240 VAC, 50/60HZ, with DP 32A power contractor and 32A,10 kA DP MCB-01 no with SS enclosure with proper wiring. | — | — | — | 24,572 | |
| — | 12.00 | — | — | ||
| Supply, fixing, testing and commissioning of 22-watt 6500k batten 1150 mm length LED lighting fixture as per specification SWR/LED LIGHT FITTING(Indoor/outdoor)/001-2016 effective from 18.04.2016 or latest. Including all other required accessories complete. | — | — | — | 2,616 | |
| — | 30.00 | — | — | ||
| Supply, fixing, testing and commissioning of 10-watt, 560 mm, 6500 k LED batten fixtures Including all other required accessories complete. | — | — | — | 5,347.2 | |
| — | 4.00 | — | — | ||
| Supply and fixing of LT cable terminal LILO syntax box minimum size 300 mm x 200 mm x 170 mm with Hinged door with 0.5 AMCB and 32A strip connector. | — | — | — | 7,412 | |
| — | 4.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 A modular socket outlet and 5/6 A separate modular switch, connections etc. as required. | — | — | — | 1,791 | |
| — | 6.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 15/16 A modular socket outlet and 15/16 A separate modular switch, connections etc. as required. | — | — | — | 3,300.42 | |
| — | 30.00 | — | — | ||
| Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | — | — | — | 4,320 | |
| — | 30.00 | — | — | ||
| Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. | — | — | — | 1,260 | |
| — | 1.00 | — | — | ||
| Design, Supply, fixing and commissioning of 12 Way SPN Double Door Distribution Board with following switchgears (All 'C' Series) incomer 40 A SPN RCBO sensitivity 30 mA-1 No's and outgoing SP MCB 6-32A 10 Ka - 10 No's with required suitable hardware and internal wiring complete. | — | — | — | 10,127.63 | |
| — | 2.00 | — | — | ||
| Design, Supply, fixing and commissioning of 12 Way TPN Double Door Distribution Board with following switchgears (All 'C' Series) incoming 100A FP RCCB sensitivity 30 mA-1 No's and outgoing TP MCB 63 A - 2 No., SP MCB 6-32A - 16 No's along with TP+N SPD - 1 No. with required suitable hardware and internal wiring complete. | — | — | — | 61,107.48 | |
| — | 4.00 | — | — | ||
| Supply, fixing, testing and commissioning of 6 Amp Modular switch, 6 Amp modular socket, and modular plate with support frame -1 No each on suitable PVC Box complete. | — | — | — | 1,020 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of 16 Amp Modular switches with indicator, 16 Amp modular socket and modular plate with support frame -1 No each on suitable PVC Box complete. | — | — | — | 764 | |
| — | 100.00 | — | — | ||
| Wiring for circuit/ sub main wiring along with earth wire 2 X 6 sq. mm + 1 X 6 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface /concealed medium class PVC conduit/casing capping as required as per CPWD Standard. | — | — | — | 31,352 | |
| — | 200.00 | — | — | ||
| Wiring for circuit/ sub main wiring along with earth wire 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface /concealed medium class PVC conduit as required as per CPWD Standard | — | — | — | 48,624 | |
| — | 250.00 | — | — | ||
| Wiring for circuit/ sub main wiring along with earth wire 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface /concealed medium class PVC conduit as required as per CPWD Standard. | — | — | — | 49,985 | |
| — | 40.00 | — | — | ||
| Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable in surface /concealed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable etc. as required as per CPWD Standard. | — | — | — | 29,587.6 | |
| — | 2.00 | — | — | ||
| Supply, erection, commissioning and testing of 3 phase 5 HP Mono submersible pump working on 415 V 50 Hz AC supply BEE 5-star rating with warranty similar to Make CELVIN Model STKOMT24. | — | — | — | 53,655.2 | |
| — | 2.00 | — | — | ||
| Larsen & Toubro 5 HP Starters Control Panel for Submersible Pump Brand: Larsen & Toubro (Detailed Description /Specification as per Product # 1 of GeM Contract No. GEMC- 511687719530012 dt.13/11/2024). | — | — | — | 12,776 | |
| — | 2.00 | — | — | ||
| Supply and fixing of 3 phase meter box of suitable size with double door and with viewing MC along with suitable hardware and accessories complete. | — | — | — | 5,812 | |
| — | 2.00 | — | — | ||
| Supply and fixing of 1 phase meter box of suitable size with double door and with viewing MC along with suitable hardware and accessories complete. | — | — | — | 3,632 | |
| — | 2.00 | — | — | ||
| Supplying of multifunction digital meter with three-line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP54 degree of protection and completely wired as required with communication Port and Class 0.5 s accuracy with all other required accessories complete. | — | — | — | 18,630 | |
| — | 3.00 | — | — | ||
| — | 1.00 | — | — | ||
| — | 500.00 | — | — | ||
| — | 6.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril-2022.pdf
ATTACHMENT
JPOintenderdocumnets.pdf
ATTACHMENT
TB-MYSAugmentationoflaundry.pdf
ATTACHMENT
AdvanceCorrectionSlips1-11toGCC-2022_1.pdf
ATTACHMENT
AdvanceCorrectionSlips12toGCC-2022_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].