Repair/maint of wooden furniture at Furniture yard at Mil Stn Gaya

Amount

Bed Hard (Drg FD-246/247) :

Taking out unserviceable top of bed plywood and Supply & Fixing new one of commercial plywood 12mm thick size 6’-3” x 3’ (BWR type) fixed with MS screw including tightening all loose members of bed properly by providing some extra wooden supports of suitable size to connect legs and frame of bed, screwed properly so that no loose member found in the bed and bed should not shake after repairing complete. All as shown on drg and as directed by Engr-in-charge

Taking out unserviceable head board of Bed Hard and providing new ones & fixing of five hard wood battan (Horrizental and vertical) covered both side with 4mm thick veener ply wood one side teak face fixed with MS screw,fevicol and nails including providing teak wood beading 6mm thick to all sides of board complete. All as shown on drg and as directed by Engr-in-charge

Taking out unserviceable Veener of head board of Bed Hard and providing new ones with 4mm thick ply wood one side teak face fixed with MS screw,Fevicol and nails alongwith half round beat in rectangle shape on the face of veener of head board including providing teak wood beading 6mm thick to all sides of head board complete. All as shown on drg and as directed by Engr-in-charge.

Taking out unserviceable foot board of Bed Hard and providing new ones & fixing of five hard wood battan (Horrizental and vertical) covered both side with 4mm thick veener ply wood one side teak face fixed with MS screw,fevicol and nails including providing teak wood beading 6mm thick to all sides of board complete. All as shown on drg and as directed by Engr-in-charge

Taking out unserviceable Veener of foot board of Bed Hard and providing new ones with 4mm thick ply wood one side teak face fixed with MS screw,Fevicol and nails alongwith half round beat in rectangle shape on the face of veener of foot board including providing teak wood beading 6mm thick to all sides of foot board complete. All as shown on drg and as directed by Engr-in-charge.

Taking out unserviceable long rails and providing new Ist class hard wood long rails of the existing pattern and size to the bed complete.

Taking out unserviceable Short rails and providing new Ist class hard wood short rails of the existing pattern and size to the bed complete.

Taking out unserviceable legs and providing new teak wood legs of the existing pattern and size to bed complete .

S&F for replace of unserviceable stiffener of bed ply wood top with new stiffener of of 1st class HW (Teak) duly finished complete.

S&F for flat Iron 25 x 4mm L-Shaped stiffeners 100mm long on either side total 200mm long fixed with screw at a junction of long rail, short rail, foot and head Board of Bed hard complete.

S&F for repair of MNF fixing arrangement on Head board and foot board of bed plytop with brass screw 25 mm long round head two numbers each side.

S&F for repair of MNF set of 19 mm rectangular tube made in T fashion (with end plugged with 1.2 mm MS sheet) welded on Head board and foot board of bed plytop.

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Chair Dining (Drg FD-228, 262, 270 & 279 )

Dismantling of old unservicable rear legs of chair Dinning and supply & fixing of new legs made out of well seasoned Teak wood. The size and design all as per shown on drg and all as directed by Eng-in-charge.

All as per item No. 2.01 above but front legs of chair Dinning.

All as per item No. 2.01 here-in-before but seat frame (side rail/front rail/back rail) of chair Dinning.

All as per item No. 2.01 here-in-before but Center stiffners of Chair Dining.

All as per item No. 2.01 here-in-before but Side stiffners of Chair Dining.

All as per item No. 2.01 here-in-before but back support of Chair Dining.

S&F for removing of old unserviceable canes from Chairs Dining seat and re - canning with new plastic cane ( not recycled cane) 2 mm wide half round white colour cane (Canning shall be done as per Godrej pattern). Make : Premier/Shah or Equivalent all as specified and approved by Accepting Officer.

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Chair Writing /CBA (Drg FD-280)

Dismantling of unserviceable front legs and supply & fixing of new front legs made out of Ist class hard wood [Teak ] including hard rubber ring /PVC Shoe provided at bottom of legs with screw and a coat of French Polish with preparation of surface complete. The size and design all as shown on drg and as per directed by Eng-in-charge.

All as per item No. 3.01 above but rear legs of Chair Writing.

All as per item No. 3.01 here-in-before but seat frame (side rail/front rail/back rail) of chair writing.

All as per item No. 3.01 here-in-before but Centre stiffners of Chair Writing.

All as per item No. 3.01 here-in-before but Side stiffners of Chair Writing.

All as peritem No. 3.01 here-in-before but Arm rest of Chair Writing.

All as per item No. 3.01 here-in-before but back support of Chair Writing.

S&F for removing of old unserviceable canes from Chairs writing seat as and re - canning with new plastic cane ( not recycled cane) 2 mm wide half round white colour cane (Canning shall be done as per Godrej pattern). Make : Premier/Shah or Equivalent all as specified and approved by accepting officer.

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Chair Easy (Drg FD-201 & 229)

Dismantling of old unservicable rear legs and S & F of new Rear legs made out of first class hard wood ( Teak) including hard rubber ring /PVC Shoe provided at bottom of legs with screw and a coat of French Polish with preparation of surface complete. The size and design all as shown on drg and as per directed by Eng-in-charge.

All as per item No. 4.01 above but Front legs of existing chair easy.

All as per item No. 4.01 here-in-before but seat frame (side rail/front rail/back rail) of existing chair easy.

All as per item No. 4.01 here-in-before but arm rest of existing chair easy.

Removing of old unserviceable canes from seat of Easy Chair and re - canning with new plastic cane ( not recycled cane) 2 mm wide half round white colour cane (Canning shall be done as per Godrej pattern). Make : Premier/Shah or Equivalent all as specified and approved by accepting officer.

Removing of old unserviceable canes from back of Easy Chair and re - canning with new plastic cane ( not recycled cane) 2 mm wide half round white colour cane (Canning shall be done as per Godrej pattern). Make : Premier/Shah or Equivalent all as specified and approved by accepting officer.

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Chair Wooden Bottom without Arm (Drg FD-56 (M), 212 & 285)

Taking out unserviceable ply wood seat and S&F 6mm thick plywood BWR grade ISI marked with 6mm dia perforation, fixed with screws as in seat complete.

Dismantling of unserviceable front legs and providing new front leg made out of 1st class hard wood (Teak) complete including hard rubber ring /PVC Shoe provided at bottom of legs with screw.

All as per item No. 5.02 above but rear leg of Chair WB.

Taking down unserviceable side rails of Chair WB and supply & fixing new side rails made out of Ist class hard wood (Teak).

Taking down unserviceable seat frame (front rail/back rail) of Chair WB and supply & fixing new seat frame (front rail/back rail) made out of Ist class hard wood (Teak).

Taking down unserviceable side Stiffeners of Chair WB and supply & fixing new Stiffener made out of Ist class hard wood (Teak).

Taking down unserviceable centre Stiffeners of Chair WB and supply & fixing new Stiffener made out of Ist class hard wood (Teak).

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Peg Table (Drg FD- 25, 277 & 384)

Taking out unserviceable top and S&F new top of table peg made out of 19mm thick Exterior Grade prelaminated particle board BWR grade bonded with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails and finish with french polish complete all as specified and directed by Engineer-in Charge.

Taking out unserviceable long rail of Peg Table and providing new long rail of Ist class hard wood [Teak ] and finishes with two coat of French Polish after preparation of surface complete all specified and directed.

Taking out unserviceable short rail of Peg Table and providing new short rail of Ist class hard wood [Teak ] and finishes with two coat of French Polish after preparation of surface complete all specified and directed.

Dismantalling of unserviceable legs and supply & fixing of new legs made out of Ist class hard wood [Teak ] including hard rubber ring /PVC Shoe provided at bottom of legs with screw and two coat of French Polish with preparation of surface complete.The size and design shall be all as shown on drawing and as directed by Eng-in-charge.

Dismantalling of unserviceable ‘L” type bracket and supply & fixing of new ‘L” type bracket made out of Stainless steel with strainless steel screw complete all as per size and design of existing Peg Table and as per direction of Eng-in-charge.

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table 900mm x 900mm (Drg FD-88(M & 299)

Taking out unserviceable top and Supply &Fixing new top of 900 mm x 900 mm made out of 19 mm thick Exterior Grade prelaminated particle board BWR grade, bonded with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6 mm thick teak wood edging all around with Fevicol and nails complete.All as showen on drg and as directed by Engr-in-charge

Taking out unserviceable Front/Side rail of Table 900mm x 900mm and providing new Side rail of Ist class hard wood complete.

Taking out unserviceable legs of Table 900mm x 900mm and providing new legs of Ist class hard wood (Teak) complete.

Taking out unserviceable bracket ‘L’ type of Table 900mm x 900mm and providing new bracket ‘L’ type made out of Ist class hard wood [Teak] complete.

Polishing with two coat french polish of approved make duly prepared the surface by sanding machine with appropriate number of sanding Disc and as directed by Engr-in-charge.

Side Board (Drg FD-26 (M), 241& 371) :

Taking out existing old unserviceable top/bottom of side board and S&F new top/bottom made of 18/19 mm thick prelimanted particle board including 6mm thick teak wood edging all around with Fevicol and nails and finish with french polish complete all as specified and directed by Engineer-in Charge.

Taking out existing old unserviceable side/middle of side board and S&F new side/middle made of 18/19 mm thick prelimanted particle board including 6mm thick teak wood edging all around with Fevicol and nails and finish with french polish complete all as specified and directed by Engineer-in Charge.

Taking out unserviceable ply from back side of Side Board and providing new 6mm thick ply wood commercial BWR grade –I.

Taking out unserviceable shutter of Side Board and supply & fixing new shutter double leaf made of 18/19 mm thick prelimanted particle board fixed with 50mm hinges 3 Nos in each leaf with 6mm thick TW edging including replacement of 40mm plastic knob superior quality in each shutter.

S&F for taking out old unserviceable drawer of side Board and providing new drawer of made of Ist class hard wood [teak] and bottom of 6mm thick plywood commercial BWR grade-I including replacement of 40mm dia aluminium andozied/ SS fancy type knob in each drawer and polishing all wood work complete

Dismantling of old unserviceable bottom legs of Side Board and providing new legs of 45x 45 mm size made of teak wood. All as per size and design shown on drawing.

Dismantling of old unserviceable bottom long rail of Side Board and providing new new long rail made of teak wood. All as per size and design shown on drawing.

Dismantling of old unserviceable bottom Short rail of Side Board and providing new new short rail made of teak wood. All as per size and design shown on drawing.

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Sofa Set 5 Seater ( Drg FD-281/ 373) / Sofa Set 4 Seater/ Godrej Sofa set (3+1+1) Seater :

Dismentling of old and unserviceable long rails of back side Sofa set 3 seater and supply & fixing of new long rails made out of well seasoned teak wood. All as per size and design shown on drawing and as per existing Sofa set.( Drg FD-281/ 373)

All as per item No. 9.01 above but long rails of Single seater front seat.( Drg FD-281/ 373)

Dismantling of old and unserviceable side rails of sofa set and supply & fixing of new side rails made out of well seasoned teak wood all as per size and design shown on drg and as per existing sofa set.( Drg FD-281/ 373)

Dimantling of old and unservicable arms of sofa set 5 seater and supply & fixing new Arms made out of well seasoned teak wood. All a per size and design shown on drg and as per existing sofa sets.(Drg FD-281/ 373)

Dismantling of old and unserviceable Rear legs of sofa set 5 seater and supply & fixing new legs made out of well seasoned teak wood all a per size and design shown on drg and as per exiting sofa sets. ( Drg FD-281/ 373)

All as per item No. 9.01 above but front legs of Single seater/ Three seater.

Dismantling of old and unserviceable battens of sofa set 5 seater and supply & fixing new battens made out of well seasoned teak wood all a per size and design shown on drg and as per exiting sofa sets.

Replacement of foam cushion 4" thick 21"x22" with tapestry cloth removeable of approved shade and cloth. Foam cuhion make Sleepwell/Kurl-on /JJ Foam of 40 density (tapestry cloth used shall be not less than Rs 350/- per mtr) colour and design as approved by GE.Note:-Cushion should be brought in original packing& Stitching should be done in BSO yard.

S&F of cushion cover for sofa cushion 4" thick 21"x22" of size with provision of Zip Note:- Tapestry should be got approved by GE & Not be less than Rs 350/-Per Mtr.

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Removing of old latherite/Teapesty from sofa set (3+1+1) 5 seater Godrej Sofa and S&F new latherite / Teapesty as per existing pattern of sofa set all as shown on drawing and as directed by Engr-in-charge. Note:- Tapestry should be got approved by GE & Not be less than Rs 350/-Per Mtr.

supply and fixing of lower back & front support of 19mm particle particle board below the seat alongwith preparation of tighting loose joints (lower back & front support) with legs of Godrej Sofa , if any including de-rusting the surface and painting with one coat of synthetic enameled paint as as per existing pattern specified and as directed by Engineer-in-Charge.

Taking out unserviceable legs and providing new teak wood legs of the existing pattern and size fixed with MS nuts and bolts including tightening all loose members of sofa Godrej properly by providing some extra wooden supports of suitable size to connect legs and frame of sofa, screwed properly so that no loose member found in the sofa Godrej and sofa Godrej should not shake after repairing complete all as specified and as directed.

Table 900mm x 600 mm with/ without Drawer ( Drg FD-283 & 284)

Taking out unserviceable top and S & F new top of 900 mm x 600mm made out of 19mm thick Exterior Grade prelaminated particle board BWR grade, bended with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed.

Taking out unserviceable Drawer of Table 900mm x 600mm and providing new drawer made of 1st class teak wood frame with 6mm thick plywood at bottom of drawer and 40mm dia aluminium andozied/ SS fancy type in each type drawer shutter & one coat of french polish high glossy finish with preparation of surface complete.

Taking out unserviceable Long rails of Table 900mm x 600mm and providing new long rail of Ist class hard wood [Teak ] with high glossy finish french polish after preparation of surface complete all as specified and directed.

Taking out unserviceable short rails of Table 900mm x 600mm and providing new short rail of Ist class hard wood with high glossy finish french polish after preparation of surface complete all as specified and directed.

Dismentling of old unservicable legs and S & F of new legs made out of first class hard wood ( Teak) including hard rubber ring /PVC Shoe provided at bottom of legs with screw and a coat of French Polish with preparation of surface complete all as per size and design of existing Table 900mm x 600mm all as per drg and as per direction of Eng-in-charge.

Taking down unserviceable center Stiffener and supply & fixing new centre Stiffener made out of Ist class hard wood (Teak).

Taking down unserviceable Side Stiffener and supply & fixing new Side Stiffener made out of Ist class hard wood (Teak).

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Taking out unserviceable bracket ‘L’ type of Table 900mm x 600mm and providing new bracket ‘L’ type made out of Ist class hard wood [Teak] complete.

Table Dining 6/8 Persons (Drg FD-30, 239, 273 & 376)

Taking out unserviceable top and S&F new top of 1500 mm x 900mm for dining table 6 Person made out of 19mm thick Exterior Grade prelaminated particle board BWR grade, bonded with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails and one coat of french polish high glossy fininsh on edging with prepared surface complete.

All as per item No. 11.01 above but Top size 1800 x 900 mm of Table Dining 8 persons.

Taking out unserviceable long rail and providing new long rail of Ist class hard wood [Teak ] with high glossy finish french polish after preparation of surface complete all as specified and directed for Table Dining 6 person.

Taking out unserviceable long rail and providing new long rail of Ist class hard wood [Teak ] with high glossy finish french polish after preparation of surface complete all as specified and directed for Table Dining 8 person.

Taking out unserviceable short rail and providing new short rail of Ist class hard wood [Teak ] with high glossy finish french polish after preparation of surface complete all as specified and directed for Table Dining 6/8 Person.

Taking out unserviceable (support) Stiffener and providing new Stiffener Support) of Ist class hard wood [Teak ] with high glossy finish french polish after preparation of surface complete all as specified and directed for Table Dining 6/8 Person.

Dismantalling of unserviceable legs and supply & fixing of new legs made out of Ist class hard wood [Teak ] including hard rubber ring /PVC Shoe provided at bottom of legs with screw and a coat of French Polish with preparation of surface complete all as per size and design of existing Table Dining and as per direction of Eng-in-charge..

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Taking out unserviceable bracket ‘L’ type of Table Dining 6/8 pers and providing new bracket ‘L’ type made out of Ist class hard wood [Teak] complete.

Table Center (Drg FD-274, 134 (M), 375, TP) :

Taking out unserviceable top and S&F new top made out of 19mm thick Exterior Grade prelaminated particle board BWR grade, bonded with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails complete as specified and directed.

Taking out unserviceable long rail of Table Center and providing new long rail of Ist class hard wood [Teak ].

Taking out unserviceable short rail of Table Center and providing new short rail of Ist class hard wood [Teak ].

Dismantalling of unserviceable legs of Table Center and supply & fixing of new legs made out of Ist class hard wood [Teak ] including hard rubber ring /PVC Shoe provided at bottom of legs with screw complete all as per size and design of existing table and as per direction of Eng-in-charge..

Taking out old unserviceable side/center stiffeners of Table Center and supply & fixing new stiffeners made of 1st class hard wood (Teak).

Taking out unserviceable bracket ‘L’ type of Table center and providing new bracket ‘L’ type made out of Ist class hard wood [Teak] complete.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table Writing (Drg FD-33, 249, 275) :

Taking out unserviceable top and S&F new top 1200 mm x 900mm made out of 19mm thick Exterior Grade prelaminated particle board BWR grade, bonded with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails complete.

supply & fixing new drawer of table writing made out Ist class hard wood [teak] with bottom of 6mm thick commercial plywood after removal of old & unserviceable plywood and replacement of 40mm dia plastic knob fancy type in drawer complete .

supply & fixing new shutter of table writing made out of 18 mm thick plywood one side teak faced and other side white face fixed with MS screw,fevicol and nails including providing teak wood beading 6mm thick to all sides of board complete after removal of old & unserviceable shutter of table writing with piano hinges and replacement of 40mm dia plastic knob fancy type in shutter complete .

Taking out unserviceable long rail of Table Writing and providing new long rail 50x25mm in size of Ist class hard wood [Teak ].

Taking out unserviceable short rail of Table Writing and providing new short rail 50x25mm in size of Ist class hard wood [Teak ].

Dismantling of unserviceable legs of Table Writing and supply & fixing of new legs made out of Ist class hard wood [Teak ] including hard rubber ring /PVC Shoe provided at bottom of legs with screws all as per size and design of existing Table Writing and as per direction of Eng-in-charge..

Taking out old unserviceable centre stiffeners of Table Writing and supply & fixing new center stiffeners made of 1st class hard wood (Teak).

Taking out old unserviceable side stiffeners of Table Writing and supply & fixing new Side stiffeners made of 1st class hard wood (Teak).

supply & fixing new Box of table writing made out of 18 mm thick plywood one side teak faced and other side white and back side of 6mm thick commercial plywood with drawer and shutter support alongwith one shelf in box after removal of old & unserviceable box of table writing and all as per size and design of existing Table Writing and as per direction of Eng-in-charge.

Taking out unserviceable bracket ‘L’ type of Table writing and providing new bracket ‘L’ type made out of Ist class hard wood [Teak] complete.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table Dressing Gents (Drg FD-230, 32 (M)) :

Taking out unserviceable top / bottom of table dressing Gents with mirror and supply & fixing top and bottom made out of 18/19mm thick block board commercial fixed with 0.9mm thick laminated sheet with Fevicol on top and bottom shall be of 6mm thick ply wood commercial BWR grade-I including 6mm thick teak wood edging all around with Fevicol and nails complete.

Taking out unserviceable Side / middle of table dressing Gents with mirror and supply & fixing side and middle made out of 18/19mm thick block board commercial fixed with 0.9mm thick laminated sheet with Fevicol on top and side and middle shall be of 6mm thick ply wood commercial BWR grade-I including 6mm thick teak wood edging all around with Fevicol and nails complete.

Taking out unserviceable mirror of Table dressing Gents and supply & fixing of mirror 5.5 mm thick with teak wood frame and back made of 6mm thick ply wood commercial BWR Gde-I.( Make : SAINT GOBIN / Modiguard /Atul as specified and approved by Accepting officer)

supply & fixing new drawer of table Dressing gents made out Ist class hard wood [teak] with bottom of 6mm thick commercial plywood after removal of old & unserviceable plywood and replacement of 40mm dia aluminium andozied/ SS fancy type in drawer complete .

S & F new Wall hanging Hook alongwith bracket ‘L’ type of Table dressing Gents and providing new bracket ‘L’ type made out of Stainless steel connecting to base frame and mirror frame to be fixed with MS screws of required size all as per existing pattern specified and as directed by Engineer-in-Charge.

supply & fixing new mirror frame of table Dressing Gents made out Ist class hard wood [teak] with back side of 6mm thick commercial plywood after removal of old & unserviceable plywood and replacement of 100mm long SS hanging hook in mirror frame complete all as specified and directed by Engineer -in-charge.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table Dressing Ladies ( Drg FD_251, FD/E6/MAP/16) :

Taking out unserviceable top / bottom of table dressing with mirror ladies and supply & fixing top & bottom of table dressing with mirror ladies made out of 18/19 mm thick block board commercial type fixed with 0.9mm thick laminated sheet fixed with Fevicol on top & bottom shall be 6mm thick ply wood commercial type BWR Gde-I including 6mm thick teak wood edging all around with Fevicol and nails complete.

Taking out unserviceable Side / middle of table dressing with mirror ladies and supply & fixing Side and middle of table dressing with mirror ladies made out of 18/19 mm thick block board commercial type fixed with 0.9mm thick laminated sheet fixed with Fevicol on top & bottom shall be 6mm thick ply wood commercial type BWR Gde-I including 6mm thick teak wood edging all around with Fevicol and nails complete.

Taking out unserviceable mirror of Table dressing Ladies and supply & fixing of mirror 5.5 mm thick alongwith teak wood frame and back made of 6mm thick ply wood commercial BWR Gde-I .( Make : SAINT GOBIN / Modiguard/Atul as specified and approved by Accepting officer)

Renewal of glass shutter of Table Dressing Ladies with mirror 5.5mm thick double leaf complete all as shown in drawing. Make : SAINT GOBIN or modiguard or equivalent as specified and approved by Accepting officer).

supply & fixing new drawer of table Dressing Ladies made out Ist class hard wood [teak] with bottom of 6mm thick commercial plywood after removal of old & unserviceable plywood and replacement of 40mm dia aluminium andozied/ SS fancy type in drawer complete .

Dismantling of unserviceable legs at bottom of Table Dressing Ladies and supply & fixing of new legs with frame made out of Ist class hard wood [Teak ] as per size and design of existing Table Dressing and as per direction of Eng-in-charge.

Dismantling of old unserviceable bottom long rail of Table dressing ladies and providing new new long rail made of teak wood. All as per size and design shown on drawing.

Dismantling of old unserviceable bottom Short rail of Table dressing ladies and providing new new short rail made of teak wood. All as per size and design shown on drawing.

supply & fixing new shutter of table Dressing Ladies made out 18/19 mm thick block board commercial type fixed with 0.9mm thick laminated sheet fixed with Fevicol on top & bottom shall be 6mm thick ply wood commercial type BWR Gde-I including 6mm thick teak wood edging all around with Fevicol and nails complete. after removal of old & unserviceable plywood and replacement of 40mm dia aluminium andozied/ SS fancy type in shutter complete all as specified and directed by Engineer -in-charge.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Teapoy (Drg FD- 341 (M), 278, 232) :

Taking out unserviceable top and Supply & Fixing new top of teapoy made out of 19mm thick Exterior Grade prelaminated particle board BWR grade, bended with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails complete.

Taking out unserviceable long rail and providing new long rail made out of Ist class hard wood [teak ] complete.

Taking out unserviceable short rail of Tepoy and providing new short rail of Ist class hard wood (teak) complete.

Taking out old unserviceable legs of Tepoy and providing new legs of Ist class hard wood [teak]complete.

Dismantalling of unserviceable ‘L” type bracket and supply & fixing of new ‘L” type bracket made out of Ist class hard wood and a coat of French Polish with preparation of surface complete all as per size and design of existing Teapoy Table and as per direction of Eng-in-charge.

Taking out of old unserviceable stiffener of Tepoy and providing new stiffener 1st class hard wood (Teak) complete.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Hand Stand with Mirror (FD-361 & 362)

Taking out unserviceable mirror and supply & fixing of new Mirrror of thickness 5.0 mm alongwith semiround beat around the mirror make- Modiguard and equilvalent.

Taking out unserviceable veneer on the top and supply & fixing made out of 4 mm thick veneer with main board including 6mm thick teak wood edging all around with Fevicol and nails complete as per drg and directed by Engineer -in-charge.

Taking out unserviceable ply at the back side and supply & fixing made out 6mm thick ply wood commercial BWR grade-I including two hanging clips with Fevicol and nails complete as per drg and directed by Engineer -in-charge.

Taking out unserviceable Hook on the top and supply & fixing new hook of stainless steel fancy type as per drg and directed by Engineer -in-charge.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Chair Dining long back (FD/E6/MAP/10)

Dismantling of old unservicable rear legs of chair Dinning long back and supply & fixing of new legs made out of well seasoned Teak wood alongwith nylon buffer screwed. The size and design all as per shown on drg and all as directed by Eng-in-charge.

All as per item No. 18.01 above but front legs with nylon buffer of chair Dinning long back.

All as per item No. 18.01 here-in-before but seat frame (side rail/front rail/back rail) of chair Dinning long back.

All as per item No. 18.01 here-in-before but Center stiffners of chair Dinning long back.

All as per item No. 18.01 here-in-before but Side stiffners of chair Dinning long back.

All as per item No. 18.01 here-in-before but back horizontal support of chair Dinning long back

All as per item No 18.01above but long back of vertical strips all as per drg and all as directed by Eng-in-charge.

All as per item No 18.01 above but Foam cushion 75mm thick and 32 density duly covered with tapestry cloth of approved quality.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Book Case (wooden) (FD-45,237)

Dismantling carefully and taking out old unserviciable/damaged shelf of Book Case and supply & fixed of new shelf made out of 2nd class hard wood to required shape & size and fixed the same properly as per drg and as directed by Engr-in-charge

Dismantling carefully and taking out old unserviciable/damaged top and bottom of Book Case and supply & fixed of new top and bottom made out of 2nd class hard wood to required shape & size and fixed the same properly as per drg and as directed by Engr-in-charge

Dismantling carefully and taking out old unserviciable/damaged side section of Book Case and supply & fixed of new side section made out of 2nd class hard wood to required shape & size and fixed the same properly as per drg and as directed by Engr-in-charge.

Taking out unserviceable ply at the back side and supply & fixing made out 6mm thick ply wood commercial BWR grade-I as per drg and as directed by Engr-in-charge

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Chair Dining High Back Cushioned (GC's Mess Chair Dining)

Dismentling of Old unserviceable rear legs of chair Dining High back and supply & fixing of new legs made out of well seasoned teak wood. All as per size and design of exiting chair Dining and as per direction of Eng-in-charge as shown on drg.

All as per item No. 20.01 above but front legs of chair Dining High back with proper design as per existing chair.

All as per item No.20.01 above but back Support of chair Dining High back with proper design as per existing chair.

All as per item No. 20.01 above but removing of old unserviceable cushion from seat of chair Dining High back and replacing the same the new cushion of 32 density complete as specified and approved by Accepting Officer. All as shown on drg and design as per existing chair.

All as per item No. 20.01 above but removing of old unserviceable cushion from back of chair Dining High back and replacing the same the new cushion of 32 density complete as specified and approved by Accepting Officer. All as per size and design of exiting chair dining and as per direction of Eng-in-charge as shown on drg.

All as per item No. 20.01 above but removing of old unserviceable latherite from back support of chairs Dining high back and replacing the same with new latherite complete as specified and approved by accepting officer. All as per size and design of exiting chair dining and as per direction of Eng-in-charge as shown on drg.

All as per item No. 20.01 above but removing of old unserviceable Latherite from seat of chair Dining High back and replacing the same the new latherite complete as specified and approved by Accepting Officer. All as per size and design of exiting chair dining and as per direction of Eng-in-charge as shown on drg.Latherite sample to be got approved by GE.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Almirah Medium 1/2H x 1/2 S Wooden

S & F new Handle set of fancy type approve shade to be fixed with MS screws of required size all as per existing pattern specified and as directed by Engineer-in-Charge.

S & F new Haps and staple of fancy type approve shade to be fixed with MS screws of required size all as per existing pattern specified and as directed by Engineer-in-Charge.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Almirah Mess Utencil

S & F new Handle set of fancy type approve shade to be fixed with MS screws of required size all as per existing pattern specified and as directed by Engineer-in-Charge.

S & F new Haps and staple of fancy type approve shade to be fixed with MS screws of required size all as per existing pattern specified and as directed by Engineer-in-Charge.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table Writing Medium

S & F new Handle of fancy type approve shade to be fixed with MS screws of required size all as per existing pattern specified and as directed by Engineer-in-Charge.

supply & fixing new drawer of table writing made out Ist class hard wood [teak] with bottom of 6mm thick commercial plywood after removal of old & unserviceable plywood and replacement of 40mm dia aluminium andozied/ SS fancy type in drawer complete and as directed by Engineer-in-Charge.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

M/S MAGADH CONSULTANT

M/S ABHAY KUMAR AND BROTHERS