Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
4 Nov 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION Vimanapura Post Bangalore - 560 017
MACHINING OF FRONT CANOPY FRAME FOR JAGUAR TRAINER
9877
A/OPEN TENDER/ESP/1371-1032/1/24
Works
Bangalore Complex- Aircraft Divn
₹0
₹40,000
4 Nov 2024
3 Oct 2024
3 Oct 2024
4 Nov 2024
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION, BANGALORE COMPLEX POST BAG NO. 1788, VIMANAPURA POST, BANGALORE-560 017 INDIA Phone: +91 80 22321519, Fax +91 80 22315188 Web Site: www.hal-india.co.in
ANNEXURE-II (Technical Compliance Matrix)
Tender Ref No. A/OPEN TENDER/ESP/1371-1032/1/24 Dtd 03.10.2024 Tender Due Date: 23-10-2024
Scope of Supply MACHINING OF FRONT CANOPY FRAME REQUIRED FOR JAGUAR TRAINER -(OPEN TENDER - TWO BID SYSTEM)
Tenderer / Bidder Details
1 Name of the Tenderer / Bidder M/s.
2 Nature of Organization (Govt. / Public Limited Co. / Pvt. Limited Co. / Partnership / Proprietary)
3 Address of Registered Office
4 Address in Bangalore
5 Contact Person & Designation with Mobile No.
6 Telephone No.
9 Please confirm whether the bidder is Unregistered / Registered / Composition Scheme in GSTN
10 GSTIN No. (Copy to be Submited)
11 PAN No. (Copy to be uploaded)
12 Whether the Bidder is MSE as per MSMED Act (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by SC/ST? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by Woman Enterpreneur? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Bidders who wants to avail privileges given to MSME vendors, should have UAN. Copy of the Udyog Aadhar certification shall be submitted to consider such privileges to MSMEs.
13 Pl. indicate whether the bidder is blacklisted or delisted. (Bidders who are blacklisted or delisted from any PSU / Govt. Departments will not be eligible to participate for bidding)
14 Whether the Bidder is a Registered Vendor with any of the HAL Divisions.
If 'Yes', please confirm the name of HAL Divisions where you have registered and provide the details such as Vendor Registration No. & Category and UPLOAD related documents to support your claim.
15 Pl. confirm the adress to which PO to be placed in the event of acceptance of your tender after bid evaluation.
16 Bidder shall indicate their GeM (Government e Marketplace) Seller ID.
17 Please upload your Bank details in NEFT/RTGS/ECS format duly authorized by concerned Branch Manager of the Bank.
BANK DETAILS (Copy of cancelled cheque leaf to be Submited) Bank Account No.
Name of the Bank
Type of Account
1. BID QUALIFICATION CRITERIA (BQC)
Sl. No. Instructions Remarks Bidder Compliance
1.1 BID QUALIFYING CRITERIA (ESSENTIAL):
1.1.1 DETAILS OF CONSTITUTION OR LEGAL STATUS OF THE TENDERER: The Bidder should be a Company/Firm/Proprietorship having valid GSTN Registration and PAN in India. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.2 Bidder shall be an Indian Vendor or else their tender will be rejected. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.3 Bidder shall have Mandatorily CLASS III DSC from the authorised agency and got Registered with HAL E-portal to participate in the Open Tender. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.4 The supplier shall furnish a Performance Bank Guarantee as per HAL’s format (Annexure- III ) for 10% of the PO Value excluding GST from a scheduled bank in India and the same shall be valid up to end of the warranty period from the date of acceptance / commissioning or otherwise equivalent amount shall be retained till completion of warranty period and other obligation of Purchase Order / contract. In case Supplier does not agree for Performance Bank Guarantee / retention of equivalent amount from their invoice/bill, the offer would be summarily rejected Essential-To Note & Confirm
1.1.5 The Bidder shall sign the legal instruments like Non-Disclosure Agreement (NDA) as per the HAL prescribed format (Refer Annexure - IV) against supply of drawings, process sheets, documents etc Including soft and hard copies by HAL for submission of competative quote in the HAL E-Portal. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.6 Earnest Money Deposit (EMD): The bidder shall be required to deposit earnest money of Rs. 40,000/- (Rupees Forty Thousand only) for Indian Bidders. The EMD shall be submitted in Demand Draft/Banker’s Cheque/Wire Transfer only in favour of Hindustan Aeronautics Limited, payable at Bangalore and enclosed in a cover with tender reference and due date super scribed, and should reach the following address or the requisite amount to be Wire Transferred before Tender Closing date & Time. Deputy General Manager [External Source Department], Hindustan Aeronautics Ltd., Aircraft Division, Bangalore Complex, Bangalore-560017.India Ph : 080-22322243/1519 For Wire transfer, please make use of the following bank details: ACCOUNT NAME: HINDUSTAN AERONAUTICS LIMITED, AIRCRAFT DIVISION ACCOUNT NO: 39187601793 IFSC CODE : SBIN0001114 BANK NAME : STATE BANK OF INDIA, HAL BRANCH However EMD is exempted for PSUs, Other entities in the Govt Sector, MSEs Exempted by Govt Policy and foreign vendors. Vendor has to submit relevant documents MSME, Udyog Aadhaar etc., for claiming exemption. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.7 Experience:
a Vendor shall provide performance feedback from any one of their customer with contact details to whom similar Cacpacity of MACHINING OF FRONY CANOPY FRAME REQUIRED FOR JAGUAR TRAINER have been supplied in the last 5 years. For this condition, Exemption not applicable for Start ups & MSE vendors. Essential-To Note, Confirm & upload the relevant documentary evidence.
b HAL reserves the right to verify the information by the vendor. In case the information is found to be false/ incorrect, the offer shall be summarily rejected. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.2 Bidders to Note the following:
1.2.1 The bidder along with the bid shall furnish documentary evidence at the first instance itself to substantiate their claim meeting the requirement specified in the qualifying criteria. Qualification may be completed based on the details so furnished without seeking any subsequent additional information. Noted & Confirmed
1.2.2 Even though bidder meets all the criteria mentioned above, HAL reserves the right to assess the Bidder’s capability and capacity to perform the job, in the overall interest of HAL and HAL can reject the bid(s) at any time without assigning any reason and without incurring any liability to the affected bidders(s). Noted & Confirmed
1.2.3 Submission of BID (Techno Commercial) by any Unregistered Vendor of Aircraft Division, such Vendor will be assessed by the Technical Team during Technical Evaluation stage. Based on the outcome of the assessment report of the Technical Committee Vendor shall be Qualified/approved for opening of Commercial Bid. Noted & Confirmed
2. TECHNICAL COMPLIANCE MATRIX (Vendor Qualification Criteria)
SL NO PRE-REQUISIT CRITERIA MANDATORY / DESIRABLE ACCEPTABLE / NOT ACCEPTABLE REMARKS
1 Supplier must have 5 axis Machine to machine the component (To that extent attach the supporting document) MANDATORY
2 Vendor must have Minimum 4m length x 2 m width x 1.5 m height length Machine Bed, Trained operator for machining Magnesium material with saftey precaution , Fire Safety Provision for fire accident handling Equipments,Power Back up & Should have Proper Box arrangement for handling during transport and storage MANDATORY
3.SCOPE OF WORK DESCRIPTION
SL No. SCOPE DESCRIPTION MANDATORY/ DESIRABLE ACCEPTABLE / NOT ACCEPTABLE REMARKS
1 The vendor scope involves Machinig of Front Canopy Frame of Jaguar Trainer
1.1 Purpose Machining of Jaguar Canopy Frame from Magnesium casting FDY 2040 with material spec RZ5-T6 For info
1.2 Machine required 5 axis Machine Essential
1.3 Balancing and loading of casting on machine Balancing of casting with respect to part,layout and marking before loading Essential
1.4 Experience Machining of Magnesium material Essential
1.5 Chip Handling Vacuum suction Desirable
1.6 Size of machine Bed Minimum 4m length x 2 m width x 1.5 m height Desirable
1.7 Tool Development Capability Fixture fabrication facility to load the component Essential
1.8 CMM Facility For contour and hole checking Desirable
1.9 Fire Saftey Provision for fire accident handling Equipments Essential
1.10 Chip disposal System Suitability for handling magnesium chips(inflammable) Essential
1.11 Operators Trained for machining Magnesium material with saftey precaution Desirable
1.12 Documentation CNC layout sheet and Process Sheet in line with Drawing and HAL Process Essential
1.13 Transport and Storage Proper Box arrangement for handling during transport and storage Desirable
1.14 Intermediate checking Intermediate checking of dimension during machining Essential
1.15 Power Back Up Smooth machining operation in the event of power failure Essential
1.16 Calibration Periodic Machine calibration Essential
1.17 Accuracy Positional tolernace required minimum 50 microns/meter Desirable
2 Delivery shedule
2.1 FAI : Vendor has to supply the FAI Components out of HAL supplied Raw Material to prove the process/Program and submit along with dimensional , CMM report within 120 (Hundred and Twenty) Days from the date of receipt of Raw Material receipt of PO/Raw material/Module and other Technical inputs like Drawing Issue change/Part Issue Change/Amendment to PO for Part Number change/Process Change/Part Modifications/Raw Material Change etc., from HAL which ever is latest. Batch Qty :The Stipulated time for delivery will be 03 Months for each part from date of loading/ Acceptance of FAI/Receipt of Raw Material and and other Technical inputs like Drawing Issue change/Part Issue Change/Amendment to PO for Part Number change/Process Change/Part Modifications/Raw Material Change etc., from HAL which ever is latest along with dimensional & CMM Report . FOR COMPLIANCE
3 SUPPLY OF DATA:
3.1 All the Technical data will be provided in the form of soft copy i.e Scanned Drawings and process Sheets. FOR INFORMATION
4.1 Submission of tendered quotation should be in Two Bid system: FOR INFORMATION
5 UNDERSTANDING OF REQUIREMENT
5.1 Must understand all technical requirements, ensure availability of all the data, drawings & models needed for fabrication and certification and answer with "YES" for this point which states that the vendor has all technical details,requirements are understood and would complete the project in time once awarded. MANDATORY
5.2 Pre-bid meeting with suppliers will be conducted during tendering to ensure better understanding of scope of work. Tool design and Tool fabrication requirement will be expained to interested vendors during Pre-bid meeting at Aircraft Division, HAL. FOR INFORMATION
6 NON DISCLOSURE AGREEMENT:
6.1 The vendor should maintain utmost confidentiality on the information furnished to him for carrying out the tasks. The information cannot be transmitted / divulged / communicated with other parties without prior permission from competent authorities from HAL. The vendor has to execute an agreement accordingly. MANDATORY
7.1 The data / designs / intermediate tools generated during the execution of the contract will be the exclusive property of M/S. HINDUSTAN AERONAUTICS LIMITED, AIRCRAFT DIVISION, BANGALORE-560037, INDIA. FOR INFORMATION
8 DOCUMENTATION
8.1 All the documents prepared by vendor for the project should only be in “ENGLISH”. FOR INFORMATION
8.2 All dimensions measured (both intermediate & final) on detail tools and assemblies including snags, reworks etc are to be documented & submitted in original with necessary endorsements of Aircraft Division, HAL Quality assurance department. FOR INFORMATION
9.1 The vendor should follow IS standards or equivalent for all the tooling elements. FOR INFORMATION
9.2 Prior permission will have to be obtained from HAL for using alternatives. FOR INFORMATION
10 GENERAL NOTES:
10.1 All the vendor designs and Inspection Methodologies if any are to be approved by HAL. FOR INFORMATION
10.2 Technical modifications or changes are to be incorporated with the prior approval of HAL. Vendor can seek the guidance in case of doubt from HAL MANDATORY
10.3 HAL will depute its inspection personnel during intermediate inspection stages. FOR INFORMATION
10.4 All the supporting / auxiliary tooling / inspection aids are to be arranged by vendor at their cost. HAL will not supply any of these items. Vendor should ensure that these instruments are selected based on acceptence and tolerence requirement of the tool. FOR INFORMATION
10.5 HAL has the discretion of assigning the work on physical verification of the progress and take appropriate actions, including cancellation of the order at any stage. FOR INFORMATION
10.6 The vendor shall submit a monthly progress report with reference to planned schedules of delivery, of assembly jig manufacturing, indicating status of various activities. FOR INFORMATION
10.7 In case of doubt or delay of getting any data from HAL, the vendor should contact Tooling Dept, Aircraft Division, HAL immediately before proceeding with the work. FOR INFORMATION
11.1 The items supplied as per the above RFQ, by taking the appropriate safety standards in to consideration to prevent any damage to the personnel / Equipment at the time of delivery. FOR INFORMATION
11.2 The supplier will solely be responsible for any losses that may incur during the transit of the parts inside the HAL premises till final acceptance by HAL. FOR INFORMATION
11.3 The information furnished above is only to enable the vendor to arrive at the work content and realize the technicalities. FOR INFORMATION
11.4 The vendor has to bear all the expenditure for execution of this order including material transportation, payment of necessary taxes and levies while bringing / taking the equipment, positioning the personnel at HAL Aircraft Division/any other location in the country for repair / rework, obtaining necessary clearances / permissions from concerned agencies, losses / damages / claims during the period of execution and warranty FOR INFORMATION
The blank box highlighted in yellow colour shall be filled by the Vendor and uploaded the dully filled format with authorised seal and Signatory along with commercial quote Bid of the above E-Tender mandatorily.
DEFINITIONS & INTERPRETATIONS
HAL / COMPANY : Means Aircraft Division - HAL, who is interested to appoint a Supplier for the tendered service.
BIDDER / TENDERER : The firm / Agency who submits the bid / tender against this Invitation for Tender (IFT)
SUCCESSFUL BIDDER or TENDERER / Supplier / Vendor: The Bidder/Tenderer, whose bid/tender is accepted by HAL for award of Contract.
BID SHOULD BE SUBMITTED THROUGH E-PROCUREMENT (TWO BID SYSTEM)
HINDUSTAN AERONAUTICS LTD.,
AIRCRAFT DIVISION
COMMERCIAL QUOTE FORMAT
TELEPHONE: 080 - 22322243/22321519 HAL GSTIN : 29AAACH3641R1Z3
NATURE OF WORK: MACHINING OF FRONT CANOPY FRAME REQUIRED FOR JAGUAR TRAINER. (OPEN TENDER -Two Bid System)
TENDER REFERENCE NO: A/OPEN TENDER/ESP/1371-1032/1/24 Dtd 03.10.2024 Tender Due Date: 23-10-2024
VENDOR NAME : VENDOR ADDRESS :
VENDOR QUOTE REF: QUOTATION DATE:
VENDOR GSTIN: UDYAM REGISTRATION NO:
TYPE OF ENTERPRISE MEDIUM/ MICRO/SMALL WOMEN ENTER PRISES (YES/NO)
OWNER OF THE ENTERPRENEUR BELONGS TO SC /ST OR OTHERS GEM SELLER ID
TReDS REGISTRATION NO: SAC NO FOR SERVICE RENDERED
CONTACT PERSON & PHONE NO: E-MAIL ID
Sl No. Part No Description Raw Material Size Raw Material Specification Part Length (in RDM) Part Breadth Part Make Raw Material Cost per Part (Approx) Operation Nos. Qty Vendor quote Total Cost
Total Taxable Value (A) 0
Add : Statutory Taxes & Duties (i.e., GST wherever as Applicable)
CGST in % on Total Taxable Value (A) as applicable effective from 01.07.2017 - ( B ) 0.00% 0
SGST in % on Total Taxable Value (A) as applicable effective from 01.07.2017 - ( C ) 0.00% 0
IGST in % on Total Taxable Value (A) as applicable effective from 01.07.2017 - ( D ) 0.00% 0
GRAND TOTAL - ( Sum of A+B+C+D) 0
Validity of Quotes
Delivery Lead Time
Terms and Conditions Annexure-I, Scope of Work & Commercial bid notes (Acceptable / Not acceptable)
Your Quote is Subject to the following Terms & Conditions: Note:1. Models/Drawings/HAL standards and process for submission of competitive quote will be shared only on Bidder confirmation duly signed with authorised seal of the company with respect to mandatory (2) Technically Compliance matrix (Vendor Qualification Criteria) condition No.1 of BQC of Annexure II. To that extent Vendor shall sign the Omnibus NDA as per HAL prescribed format which uploaded in the Tender documents of the e-procurement portal (Refer Annexure IV).
a) The price quoted is F.O.R, HAL, Aircraft Division, B'lore as per below conditions. i) The vendor scope involves Machining of Jaguar Canopy Frame from Magnesium Casting FDY 2040 with material Specification RZ5-T6. ii) Machining of the Part 5 Axis Machine is essential requirement. iii) Selected vendor is required to execute the work at his premises utilizing his facilities like min 4m length x 2m width x 1.5m hight machine bed,Fire Safety,CMM facility and Magnesium material handling experience. iv) Trained operators for machining of magnesium material with safety precaution. v) Transport and storge should be through proper box.
b) Earnest Money Deposit (EMD): The Indian bidders shall be required to deposit earnest money of Rs. 40,000/- (Rupees Forty Thousand only). The EMD shall be submitted in Demand Draft/Banker’s Cheque/Wire Transfer only in favour of Hindustan Aeronautics Limited, payable at Bangalore and enclosed in a cover with tender reference and due date super scribed, and should reach the following address or the requisite amount to be Wire Transferred before Tender Closing date & Time. Deputy General Manager [External Source Department], Hindustan Aeronautics Ltd., Aircraft Division, Bangalore Complex, Bangalore-560017.India Ph : 080-22322243/1519 For Wire transfer, please make use of the following bank details: ACCOUNT NAME: HINDUSTAN AERONAUTICS LIMITED, AIRCRAFT DIVISION ACCOUNT NO: 39187601793 IFSC CODE : SBIN0001114 BANK NAME : STATE BANK OF INDIA, HAL BRANCH, However EMD is exempted for PSUs, Other entries in the Govt Sector, MSEs Exempted by Govt Policy and foreign vendors. Vendor has to submit relevant documents like MSME, Udyog Aadhaar etc., for claiming exemption.
c) The Statutory taxes as applicable (i.e,G S T) at the time of delivery to be indicated Explicitly in percentage as provision given in the above commercial quote format coloured with Yellow. In case if the Vendor has not indicated the Tax line structure in % or left blank or not given any qualification for applicability of taxes as provision given in the additional notes below, such quotes shall be considered as "Inclusive of all Taxes and Duties".
d) The RFQ quantity Items indicated is tentative, which may Increase/Decrease from time to time based on our LCA production Programme The Vendor shall submit the competitive offer considering the 3 Years anticipated requirement in addition to the above RFQ Quantity. The quotes of the Vendor shall be firm and fixed valid for 3 years period.
e) Identical Prices: In case Two or more bidder quotes the same price HAL reserves the right to seek revised offer from the same bidders and placing the order on the revised L1 offer. In case if the same situation prevails again then HAL reserve the right to place order on any one of them. When counter terms and conditions have been offered by a bidder HAL shall not be deemed to be governed by such terms and condition unless specific written acceptance there of has been given by HAL.
f) The offer is valid unless otherwise specified in the quote should remain valid for our acceptance for a minimum of 120 Days from the closing date of Tender.
g) Post Tender Correction: If the bidder request for any post Tender correction after opening of the Tender, such Tender is liable for Rejection or Disqualification.
h) Payment Terms: 100 % Payment will be made after final acceptance of Machined Front Canopy Frame as per the HAL supplied Tool Drawings/Models by Tooling Quality Inspector at HAL Aircraft Division. RC: 100 % Payment on acceptance of Components by HAL Quality Inspector at HAL Aircraft Division, B'lore. To facilitate the Vendor's Payment, it is requested to furnish the required bank details to make payments through RTGS. NRC: All the NRC items shall be returned in good condition along with on completion and acceptance of last batch of each Items order quantity. 100% Payment will be made on supply and acceptance of NRC Items by HAL Quality Inspector after completion and acceptance of respective Component part order quantity.
i) Any minor changes due to Higher Issues or etc., against above RFQ Parts, the Vendor has to Carry out such Minor work for the applicable Order Quantity without any additional Cost/Claim.
j) Vendor can enter "0" Values for partial Regrets for Line Wise Items, since the cells accept only "numerical values" and In case if they want to regret the whole Tender, "Regret" can be qualified in the additional notes as provision given below.
k ) Delivery : FAI : Vendor has to supply the FAI Components out of HAL supplied Raw Material to prove the process/Program and submit along with dimensional , CMM report within 120 (Hundred and Twenty) Days from the date of receipt of Raw Material receipt of PO/Raw material/Module and other Technical inputs like Drawing Issue change/Part Issue Change/Amendment to PO for Part Number change/Process Change/Part Modifications/Raw Material Change etc., from HAL which ever is latest. Batch Qty :The Stipulated time for delivery will be 03 Months for each part from date of loading/ Acceptance of FAI/Receipt of Raw Material and and other Technical inputs like Drawing Issue change/Part Issue Change/Amendment to PO for Part Number change/Process Change/Part Modifications/Raw Material Change etc., from HAL which ever is latest along with dimensional & CMM Report . In case FAI and batch supplied together, then the LD will be calculated considering Batch Quantity delivery lead time of 03 Months from raw material loaded date as per PO delivery terms. (Note: The delay attributable to HAL in giving the clearance of Stage Inspection at Vendor place by QC HAL, Aircraft Division wherever as applicable will be waived off, to that extent Vendor has to produce evident Proof for relaxation of such claims applicable for FAI and Batch Quantity).
L) On completion of Machining of front canopy frame vendor has to give intimation to the HAL Quality & ES department, to depute the inspector for inspection of the component/s at vendor premises.
m) The maximum permissible rejection allowance will be 5 % or 1 No if the RFQ/Order Quantity is less than 20 Nos against each item. In case if the rejection allowance exceeds the requisite allowance permitted, HAL Aircraft Division has the right to recover the cost of raw material as indicated in the above commercial quote format from the subcontractor . All rejected materials should be returned to HAL, Aircraft Division by the subcontractor on F.O.R basis. Any subsequent order amendment issued for the additional quantity, 01 No rejection allowance for each batch quantity of 20 Nos is permitted against each item and there on, . The Raw material cost indicated in the RFQ is tentative. The exact loaded material cost on rejection will be recovered at the point of payment as per the actual loaded material type and respective current material purchase price.
n) The Vendor has to Upload the duly filled and authorised signed copy of TECHNICAL COMPLIANCE MATRIX CUM SCOPE OF WORK (ANNEXURE-II) along with commercial Quote Bid of the above E-Tender Mandatorily for Evaluation of offer Technically by TEC. The blank box highlighted in yellow colour of the Scope of work Compliance Matrix - Annexure II shall be filled by the Vendor. Any Vendor quote technically Dis-Qualified by TEC such Commercial Bid quote will not be opened.
o) Pre-Bid meeting: Pre-Bid meeting is organised before one week of due date to discuss any Technical Clarification noticed by the Vendor for better understanding for submission of Competative Quote upon prior request of the Bidder which can be scheduled before due date of submission of Technical Bid.(Only after submission of Omni bus NDA and Technical Compliance Matrix (Annx ii). Models/Drawings/HAL standards and process for submission of competative quote will be shared only on Bidder confimation duly signed with authorised seal of the company mandatorily complying to Technicaly Compliance matrix condition No.1 of Annexure II. To that extent Vendor shall sign the NDA as per HAL prescribed format which uploaded in the Tender documents of the e-procurement portal (Refer Annexure IV). The Vendor has to give prior confirmation by E-mail for attending the Pre-Bid meeting with furnishing the Representative names and Government ID proof for attending the Pre-Bid Meeting putting request to DGM (ES) to email id ([email protected]) & contact No: 080-22322243/1519.
p) HAL reserves the right to place Repeat Order up to 100% of the value & quantity of the original order for any additional quantity requirement after placement of the original order (or) within 12 months from the date of completion of the original order.
q) The other general terms and conditions will be indicated in Annexure-I. The Vendor should submit the Commercial Quote taking in to consideration of all the Annexures and Scope of Work as as referred in the RFQ
r) In case you are not submitting an offer against this enquiry, the drawings & other documents enclosed shall be returned positively.
s) Supplier (Bidder) should have Security Clearance issued by concerned Police Authorities and should have clear Police Verification Report (PVR) at all times in their possession to be issued to the Purchaser (Vendee) on specific demand.
t) Confidentiality: For the purpose of this Tender/Contract/Agreement ,The Bidder/Contractor/Supplier shall not store, copy or disclose HAL's data and information whether in written, machine readable or other tangible form or disclosed orally, that is of value to HAL. Also Bidder/Contractor/Supplier agrees to use HAL's data only for the purpose under this Tender/Contract/Agreement, restrict disclosure to any other person or entity or Third party and shall safeguard the provided data including from Cyber security risks etc. Bidder/Contractor/Supplier should promptly return within 90 Days HAL's data in original media and should not keep HAL's data, upon expiry of Tender/Contract/Agreement or early termination of Contract /Agreement and certify that HAL's data has been deleted permanently. Non- Adherence to this confidentiality clause by The Bidder/Contractor/Supplier shall be treated, as a material breach of this Tender/Contract/Agreement. The provisions of this clause shall survive and remain in force notwithstanding the termination or expiry of this Contract/ Agreement.
u) Deviation Statement: Company will appreciate submission of offer based on the terms and conditions in the "RFQ" & “Scope of Service”, etc. to avoid wastage of time and money in seeking clarifications on technical / commercial aspect of the offer. Any deviation in reference to Commercial Terms & Conditions and its justifications must be submitted in the Deviation Statement format as per Annexure - V of RFQ Document only.
v) Bidders are advised, in their own interest, to ensure that their bids are submitted well before the "Due Date & Time of Bid-Submission" of the Tender as HAL's "e-Procurement System" at https://eproc.hal-india.co.in will not allow submission of bids once the closing date and time of the Tender (i.e., Due Date & Time of Bid-Submission) is reached. HAL shall not be responsible, if bidder is not able to submit the bid on account of failure in network / internet connect. Quotation sent by any other modes like e-mail/Fax/Courier/Post/ Hand drop will be not be considered for evaluation. For general correspondence kindly mail to [email protected]
w) Performance Bank Gaurantee: Performance Bank Guarantee: The supplier shall furnish a Performance Bank Guarantee as per HAL’s format (Annexure- III ) for 10% of the PO Value excluding GST from a scheduled bank in India and the same shall be valid up to end of the warranty period from the date of acceptance / commissioning or otherwise equivalent amount shall be retained till completion of warranty period and other obligation of Purchase Order / contract. In case Supplier does not agree for Performance Bank Guarantee / retention of equivalent amount from their invoice/bill, the offer would be summarily rejected.
x) Risk Purchase: In case the supplier fails to execute the order in time either in terms of quality and quantity, HAL reserves the right to procure from elsewhere at the risk and the cost of the supplier and any extra expenditure incurred due to this purchase is payable by the supplier. In case the order is not executed to the entire satisfaction of HAL the Performance Bank Guarantee shall be forfeited. Besides intimation of risk purchase action.
y) Register on TReDS Platform: “HAL is registered on TReDS Platform (Trade Receivables Discounting Systems), as being promoted by Government of India directive. It is suggested that all the MSMS vendors to take note of the same and consider for registering on any TReDS platform and avail the platform services which is being made available as per the Government Initiative.
HAL has not appointed any agent in India or outside India for procurement of any items and deals directly with Vendors. In case any individual or firm approaches you posing themselves as an authorized agent of HAL. It is requested that you should not entertain such claim and in addition inform immediately to CM (External Source Department) Aircraft Division, HAL, Bangalore" .
To be filled by the vendor wherever as applicable.
Additional Notes if any:
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
e-Tender-Notification-OPEN-TENDER.DOC.pdf
TENDER_DOCUMENT • 0.14 MB
ANNEXURE-III-PERFORMANCE-BANK-GAURANTEE.doc
TENDER_DOCUMENT • 0.03 MB
ANNEXURE-V-DEVIATION-STATEMENT.doc
TENDER_DOCUMENT • 0.04 MB
Indemnity-Bond-2024.pdf
TENDER_DOCUMENT • 0.66 MB
RTGS-NEFT-FORMAT.doc
TENDER_DOCUMENT • 0.03 MB
ANNEXURE-I-GENERAL-TERMS-AND-CONDITIONS.docx
TENDER_DOCUMENT • 0.09 MB
ANNEXURE-II-TECHNICAL-COMPLIANCE-MATRIX-1371-1032.xls.xlsm
TENDER_DOCUMENT • 0.03 MB
ANNEXURE-IV-Omnibus-NDA-Outsourcing-2024.doc
TENDER_DOCUMENT • 0.07 MB
1371-1032-SCOPE-OF-WORK.pdf
TENDER_DOCUMENT • 0.36 MB
COMMERCIALQUOTEFORMAT-1371-1032-OPEN-TENDER.xlsm
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .