Providing Main Service Cable Arial Bunched From Main Panel to MFP on the steel tubular poles including replacement of defective UG Cable from MFP to SFP at BOP Kharkhola of 7 BN BSF

Amount

Supplying and Erection of following size swaged type steel tubular poles as IS : 2713 (part II) - 1980, having painted with 2 coats of anti –corrosive primer and 2 coats of aluminum paints including Base Plate having size of 300*300*6mm in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. (a) 410SP-33 ( overall length- 09 mtr, approx weight- 164 Kg + 4.25 Kg = 168.25 Kg)

Supplying and erection of bow stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required

Supplying and errection of 3C x 95 sqmm + 70 sqmm ( Bare ) + 16 Sqmm (insulated) Aerial Bunched Cable: 1.1 KV grade Stranded & Compacted Aluminium Phase Conductor, and Stranded Messenger Conductor with All Aluminium Alloy, Phase Conductor is insulated with XLPE (Sioplas) Compound, Messenger is insulated. confirming to IS:14255-1995 up to the latest amendment. on the existing 9 mtr steel tubular pole etc. as required

Supplying & fixing of hot dipped galvanized iron Hook - Flat Eye (HOOK ROD DIA- 16 mm, EYE HOOK DIA- 38 mm, FLAT WIDTH- 35 mm, FLAT THICKNESS- 06 mm & length 250 mm) and round type pole mounting clamp not less than 114.3 mm dia, made out of 06 mm thick and 35 mm wide and 400 mm long flat hot dipped galvanized iron flat strip including suitable, bolts, nuts and washer etc as required

Supplying & fixing of Suspension Clamp - Self Supporting Type, suitable to hold 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from high strength Galvanized Steel including suitable, bolts, nuts and washer etc as required

Supplying & fixing of Dead End Clamp - Self Supporting Type, suitable to hold 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from high strength Galvanized Steel including suitable, bolts, nuts and washer etc as required

Supplying & fixing of Anchoring Clamp, suitable to hold 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from high strength Galvanized Steel including suitable, bolts, nuts and washer etc as required

Supplying & fixing of pre insulated bi metallic lugs for end termination of AB cable having size of 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from etc as required

Supplying and Drawing of one number Aluminum conductor PVC insulated and PVC sheathed armored UG cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/DWC HDPE pipe as required. (On existing border fence). (a) 3.5 x 95 Sqmm

Supplying and laying of 75 mm dia HDPE pipe (PE-100) OD 2.5 inch, minimum pressure 8.0 Kg and SDR 17, ISI marked conforming to IS 4984:2016 along with all accessories like couplers etc. on a U-Shape MS clamp made of 25 x 5 mm thick MS strip before laying of HDPE pipe Clamp should be weleded on a existing border fancing on L shape picket at a heigh of 2 feet with the help of welding machine at every 3 meter to provide support to 75 mm HDPE pipe including painting with synthetic enamel paint on welded clamp complete as required

Supplying and making end termination with brass compression gland and aluminium lugs for following sizes of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 3.5 x 95 Sqmm (45 mm)

SITC of cubical canopy type out door hut type Junction box from 3 mm thick CRCA sheet having size 500 mm (L) x 350mm (D) x 500mm (H) fabricated with CRCA sheet 3 mm thick mounted on 04 Nos 50 mm x 50 mm x 6 mm thick angle iron frame, erected in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation & refilling,hinged front & back doors with locking arrangements,,cable tray with provision of fixing of glands at hte bottom,antirust design, air ventilation grooves, water drop proofing arrangement ,insluators,earthing studs,nuts bolts etc.as required including connections,painting with primer & finish paint with synthetic enamel paintwith 04 nos aluminium bus bar strip suitable for 200 A,415 V capacity with suitable insulated support for AL bus bar complete as required.

Supplying, installation, testing and commissioning of outdoor hut type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 3 mm thick CRCA sheet, double door type with inbuilt locking arrangement, 3 mm pasivated gland plate, depth not less than 300 mm and all connection (incoming and outcoming) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 800 mm long legs, 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including providing and fixing following switchgear, fixing LED phase indicator and following accessories etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 50 cm above the ground level. The panel should not less than 1025 mm x 1250 mm x 450 mm as CPRI approved. Note:- (i) Panel size indicated is nominal. The actual size shall be as per the drawing approved by the Department. Incomer i) MMCCB 04 Pole 125 Amp Havells/C&S/L&T/HPL Fixed type 25-30 Ka breaking cap. 02 nos with spreader terminals ii) MFM 4410 LED Meter CL 1.0 WC441010OOOO 9425 - 1 No. (Make :- L&T) iii) Residual Current Circuit Breaker (Model No - BG204030, 4 Pole, 40 Amp and Sensitivity 300 mA, Make L&T) - 2 No iv) LED Phase Indicating Lamps - 1 Set of 03 Nos. Outgoings i) MCCB 04 Pole 100 Amp Havells/C&S/L&T/HPL Fixed type 25-30 Ka breaking cap. 012nos ii)MCCB 04 Pole 40 Amp Havells/C&S/L&T/HPL Fixed type 16-20 Ka breaking cap. = 02 nos with spreader terminals

Supplying, installation, testing and commissioning of outdoor hut type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 3 mm thick CRCA sheet, double door type with inbuilt locking arrangement, 3 mm pasivated gland plate, depth not less than 300 mm and all connection (incoming and outcoming) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 800 mm long legs, 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including providing and fixing following switchgear, fixing LED phase indicator and following accessories etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 50 cm above the ground level. The panel should not less than 800 mm x 800 mm x 450 mm as CPRI approved. Note:- (i) Panel size indicated is nominal. The actual size shall be as per the drawing approved by the Department. Incomer i) MCCB 04 Pole 63 Amp Havells/C&S/L&T/HPL Fixed type 16-20 Ka breaking cap. = 01 nos with spreader terminals ii) MFM 4410 LED Meter CL 1.0 WC441010OOOO 9425 - 1 No. (Make :- L&T) iii) LED Phase Indicating Lamps - 1 Set of 03 Nos. Outgoings i) MCCB 04 Pole 40 Amp Havells/C&S/L&T/HPL Fixed type 16-20 Ka breaking cap. = 02 nos with spreader terminals

Earthing with GI earth 50 mm X 2000 mm including accessories with ground enrichment compound (AIO4SiOHO), crstalline conductive mixture conforming IS 3043:1987 as required

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

Providing and fixing 50 mm dia HDPE pipe (PE 100 as per IS 4984: 2016) 3 Meter (Approx.) from ground level for cable protection along with MS Pole 9 meter high M.S. swaged pole (having bottom dia 165 mm) i/c bends, socket etc. and 1 No. MS clamp of 25 mm x 5 mm GI strip to hold the 2 Nos of HDPE pipe with suitable nut bolt etc as required.

Providing, laying and fixing 100 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required.

Laying of one number PVC insulated and PVC sheathed Power cable of 1.1 KV grade of following size direct in ground inclding excavation and refilling the trench etc as required but excluding sand cushioning and protective covering. i) Upto 35 Sqmm

Laying of one number PVC insulated and PVC sheathed Power cable of 1.1 KV grade of following size direct in ground inclding excavation and refilling the trench etc as required but excluding sand cushioning and protective covering. i) Above 35 Sqmm and upto 95 Sqmm

Laying of one number PVC insulated and PVC sheathed Power cable of 1.1 KV grade of following size in existing RCC/HUME/METAL pipe as required. i) Above 35 Sqmm and upto 95 Sqmm

M/s Usha Engineering Co.