SPECIAL REPAIR TO MUSIC AND DRAMA ROOM (RAJA RAVI VERMA COMPLEX) AT TRG AREA AND OTHER SANCTIONED WORKS AT NCC OTA UNDER GE KAMPTEE

Amount

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering.complete all as specified and as directed

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A.complete all as specified and directed.

M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of on colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping brass screw complete all as specified and directed.

M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of on colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including self tapping brass screw complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M&L for joint free coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM (1:4) finished even and fair complete all as specified.

M&L for scratch free light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed.

All as per item No 9 above but as in skirting with 10mm backing in cement mortar (1:4) complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick screed bed in CM (1:4) and aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and directed.

M&L for 4mm thick non asbestos, fibre cement building board of size 595 x 595mm including GI powder coated snap grid frame work for false ceiling comprising of the following section for making partition of 600 x 600mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main tee shall be 32mm x 24mm x 0.3mm, cross tee shall be 28mm x 24mm x 0.3mm thick with black lining in mid portion and wall angle shall be 24mm x 24mm x 0.3mm thick complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and as directed.

All as per item No 16 here-in-above but half brick wall in CM (1:4) complete all as specified and as directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed.

M&L for rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on surfaces of ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

S&F wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12 mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam,chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM (1:3) complete all as specified and directed.

M&L for Preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer and wall care putty complete all as specified and directed.

M&L for complete removal of Existing Treatment and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed

M&L for complete removal of existing treatment including old plastered surfaces on wall including brooming down or steel wire brushing ,scraping down moulds , washing down and applying two coats of acrylic emulsion weather proof paint apex of Asian 1st quality over a coat of acrylic primer complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated wall surfaces and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed

All as per item No 29 above but size exc 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30mm thick 2nd class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass, gauge etc for windows, ventilators etc, provided with stiles and rails as specified in SSR part-I, Sec-08, Clause 8.24(b), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F powder coated aluminium door comprising with frame of size 100mm x 44mm x 1.59mm thick (approx) push /pull type glazed door shutter having top and bottom rail of section 82x44x1.59mm (appx) and 100 x 44 x 1.59mm thick (appx) respectively size of styles 82 x 44 x 1.59mm thick and lock rails of size 100mm x 44mm x 1.59mm thick (appx) including all necessary jointing cleats, rubber packing, anodized aluminium beading for fixing glass pane and including 5mm thick tinted glass in both panels, hinges, hydraulic door closer, mortise lock, stays, door stoppers and aluminium push handles of size 150mm etc complete all as specified and directed.

S&F butt hinges medium weight, cold rolled mild steel (ISI Marked) of 100mm size complete all as specified and as directed.

S&F 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Taking down steel window/ventilator shutter of any size, description and in any position and refixing the same after necessary repairs and providing small accessories like screws, welding if required. complete all as specified and directed.

M&L for Preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparaton of surfaces complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/ steel frames glazed with putty or fixed with beads etc complete all as specified and directed

S&F 3 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

Demolition of un-reinforced cement concrete in any description and in any position and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

M&L for PCC type D2 (1:4:8) (40 mm graded aggreate) in foundation, filling and mass concrete/sub base complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (20mm graded stone agg) 100 mm thick in flooring finished cement concrete surface even and smooth using extra cement complete all as specifed and directed.

M&L for 75mm thick PCC (1:3:6) Type C1 (using 20 mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mist filling in the joint complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Machine cut cudappa stone slab 20-25mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F pre-polished granite 20mm thick fixed on platform/ shelves over 20mm thick screed bed in cement mortar (1:6), if directed by Engr In Charge including necessary moulding etc complete all as specified and as directed.

M&L for pre-polished Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base 20mm thick in CM (1:4) laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30mm thick complete all as specified and directed. Note:- Sand cushion will be measured and paid separately.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repairs GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed.

S&F in repairs GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection andcomplete all as specified

S&F 1000 ltr capacity HDPE Rotational moulded polyethylene water storage tanks triple layered, ISI marked (cylindrical vertical with closed top) hoisted, testing and fixed in position incl top cover incl dismantling of water tank all as specified in SSR part-I complete all as specified and directed.

S&F in 20 mm bore ball valves. high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm -210 Gms) complete. Make : Prayag

S&F in repairs stop valve (half turn)15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed.

S & F in repairs bib tap (half turn)15 mm dia cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified

S&F in repairs Pillar tap(half turn) 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum Weight 25 gms) complete all as specified and directed.

S&F in repairs vitreous china urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F 15 mm bore CP Urinal spreader for urinals complete all as specified and directed

S&F vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F vitreous china white squatting pan "Orissa Pattern" size 580x440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor complete, all as specified and directed.

S&F Cast Iron 'S' trap, including jointing with solvent cement of 100 mm dia complete all as specifed and directed.

S&F in repairs oval type Wash Hand basin ( flat back or angle back ) of size 550 X 400mm white including waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed.

S&F flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specifed and directed.

S&F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and directed.

S&F in repairs PVC (SWR) pipes of 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed and directed.

Excavation in trenches not exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

All as per item No 83 above but each additional 1.5 m or part thereof in depth beyond the first 1.5m all as specified and directed

M&L for form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L for providing RCC (1:1 1/2:3) type A-1 (nominal mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for form work to side of columns and simillar work complete all as specified and directed.

M&L for providing RCC (1:1 1/2:3) type A-1 (nominal mix) as in columns and pillars etc complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work complete all as specified and directed.

M&L for providing RCC (1:1 1/2:3) type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges and simillar work complete all as specified and directed.

M&L for providing RCC (1:1 1/2:3) type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.

M&L for providing RCC (1:1 1/2:3) type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

S&F mild steel TMT bars 8 mm dia in spacers, cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

S&F mild steel TMT bars 8 to 10 mm dia a as in stirrups, spacers and binders cut to length, bent to shape complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM (1:4) mixed with WPC finished even and smooth without using extra cement complete all as specifed and directed. (Note : WPC will be measured & paid separately).

Supply only Liquid water proofing compound of approved quality complete all as specified and directed.

M&L for prepartion of new plastered surfaces on wall and applying two coats of oil bound distemper over a coat of Primer complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path

M&L for 75 mm thick Cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed.

M&L for providing 25mm thick cement concrete (1:2:4) type B1 (Using 20mm graded stone agg), as in sub base in floor/paving etc complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10 mm dia as tle bar complete confirming to Fe-410 -O etc complete all as specified and directed.

S&F 30mm thick flush shutters solid core factory made construction with block board core and plywood face panels commercial type on both sides and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F aluminium alloy, anodised, 250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed

S&F 4.00mm thick glass pane ordinary quality and glazing with oil putty in square n. exc 0.5 sqm each pane complete all as specified and directed.

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specifed and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

M&L for preaparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

S&F Towel Rail 20mm dia of Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed.

S&F PVC connection 15mm size, 600mm long with PTMP nuts both side complete all as specifed and directed.

S&F Wash Basin oval type (56x41cm) including waste cupling and waste pipe complete all as specified and directed (Make : Hindware, CERA, Prayag )

S&F pillar cock tall height fancy type cast copper alloy, chromium plated 15mm dia of bore complete all as specifed and directed.Make : Prayag cat No 7903

S&F 1000 litres capacity HDPE Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) triple layered antibacterial, ISI marked hoisted and fixed in position all as specified and directed.

S&F bib taps fancy type chromium plated, with crunch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specifed and directed.

S&F stop/angle cock fancy type chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specifed and directed.

S&F 15mm GI tubing 'Medium grade' with all fiting and fixed complete tom wall and celing or laid in floor of fllowing sizes complete all as specifed and directed.

All as per item no 121 above but 20mm bore complete all as specifed and directed.

S & F 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

S&F PVC (SWR) pipes of 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specifed and directed.

S&F CP grating of size 100mm dia complete all as specifed and directed.

S&F PVC cowl slotted vent cowl 110 mm size complete all as specified and as directed.

S&F chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15mm bore of pipe complete.

M&L for salt glazed stoneware drain pipes laid in trenches and jointed as specified of 150mm dia all as specified and ditected

M&L for concrete bed to 150mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete in PCC (1:3:6) type C-2 all as specified and directed.

M&L for precast RCC (1:2:4) type B1 using 20mm stone aggregate as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar (1:4) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc. 1.5m above the strating point complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall /floor /ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 138 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 138 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 138 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 138 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm dia, medium grade, concealed in wall of size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. Two run of 4 sqmm + one run of 4 sqmm + one run of PVC conduit shall be measured in one length.

S&F lamp holder insulated body with back plate for angle / batten fitting complete all as specified and directed.

S&F ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed.

S&F modular switch one way 6A, 1 module complete all as specified and directed.

S&F modular switch one way 16A, 1 module complete all as specified and directed.

S&F modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator, 120 watt 2 module complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG cat No LDL-20-CDL / Bajaj/ Philips/ Luker/ Halonix.

S&F enegy efficient suface monted 2'x'2 grid ceiling LED fitting 36/40 W rated voltage 240 V, 50HZ combination with profied and flat diffuse complete all as specified and directed. Make : CG LCTLRF6-36-CDL/Philips/Wipro/ Luker/ Halonix

S&F building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc) complete all as specified and directed. Make:- CG Cat No LSTS-25-CDL-M or equivalent in Philips/ Wipro/ Luker.

S&F light fitting LED 36W suspended from ceiling including transparent suspension wires, bracket etc and connecting 3 core cable 240V 50Hz complete all as specifed and direceted. Make:- CG Cat No LCLP54-36-CDL or equivalent in Philips / Wipro.

S&F light fitting 9W bulk head luminaries with lamp holder etc completye with all accessaries and including connecting up with twin core twisted flexible cable suitable size of 230v, 50HZ complete all as specified and directed. Make :- CG LBHP-10-CDL/Bajai / Wipro / Luker / Halonix

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete (1:2:4) type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

S&F exhaust fan, steel body AC single Phase 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. Make :- CG/Bajaj/Orient/Havells

Excavation in trenches for laying of cables, poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out complete all as specified and directed.

Returning filling in,including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick complete all as specified and directed.

Removing excavated materials not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

S&F Double wall Corrugated High Density Polymer Ethyl (HDEP) pipe for laying of Electric cable of size 50 mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches,wall, floor , pole including bends, sockets and other connected accessories complete all as specified and directed.

Supply, laying, jointing and testing in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq mm, 4.0 core including testing after laid and jointed all as specified and as directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.46,314.00]

khushal constructions

M/s M.G. Hargunani

Bidder Name

chronicle enterprises

khushal constructions

M/s M.G. Hargunani