8122/SAR-10/2022-23

Amount

Demolition of brick/stone masonry or PCC coping built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, (OLD SIZE BRICKS) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

All as in item 03, but except bricks complete all as specified and directed.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm gradded stone agg )as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, drain channels, copings,parapets copings, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked), finished even & smooth without using extra cement complete all as specified and directed Note : - Supply only water proofing admixture shall be measured and paid for separately.

M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked), finished even & smooth without using extra cement complete all as specified and directed, Note : - Supply only water proofing admixture shall be measured and paid for separately.

Supply only integral liquid water proofing compound (ISI marked). complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall /concrete surfaces and applying three coats of white wash complete all as specified & directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall & applying two coats of exterior emulsion paint(1st Quality) over a coat of primer complete all as specified & directed. Note : Camouflague pattern or plain pattern as decided by engr-in Charge

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed

Excavation in post holes each not exc 0.5 cum, getting out soft/loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplush soil to a distance n exc 50m and making good surface complete all as directed by Engineer-in-charge

M&L for PCC Type C2 1:3:6 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement compete all as specified and directed by Engr-in Charge.

S&F in repair plastic net fencing of mesh size not exc 32 x 32 mm and thickness not less than 4mm fixed to steel or wooden posts as per manufacturers instructions, complete all as specified and directed.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290). compete all as specified and directed by Engr-in Charge.

S&F mild steel round bars as in tie bars of 10 mm dia and over, fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete, all as specified & directed. Note: Cost of cutting to length, bent to shape rquired & binding with MS wire is included in above rate.

S&F for Mild steel screw bolts dia of Neck 5mm to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long compleete all as directed by Engr-in-charge.

Dismantling structural steel work including door /gate , frame ,trusses compete all as specified and directed by Engr-in Charge.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section confirming to Fe-410-S with gusset plate , rails braces etc. complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or slinding with and including either hooks hinges and rollers for slinding gates, guide rail of MS flat and framing required for fixing of rollers, pintle hinges, locking arrangement as required and hanging also fastening and fixing complete using Fe- 290 (Gde E-165) quality 'A' compleete all as directed by Engr-in-charge.

M&L painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint (1st Quality) over a coat of zinc chromic primer including preparation of surfaces. compete all as specified and directed by Engr-in Charge.

Dismantling of fencing wire mesh,any type compete all as specified compete all as specified and directed by Engr-in Charge.

Supply only Chain link MS galvanisd fencing, any size or type compete all as specified and directed by Engr-in Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire compete all as specified and directed by Engr-in Charge.

Restraining & resecuring the old chain link fencing including making good stable etc compete all as specified and directed by Engr-in Charge.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Restraining & resecuring the old Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed including making good stable etc compete all as specified and directed by Engr-in Charge.

S&F in repair Punched tape concertina coil 600/1000mm dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed.

Demolition of Reinforced brickwork in suspended slabs, beams, lintels , cover, column, pillars, piers, posts and struts etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) all a specified & directed by Engineer-in-Charge.

Use and waste of Formwork to sides and soffits of flat rough finished surfaces of concrete of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span etc and the like complete all as specified and directed by Engr-in-Charge. Note :- Reinforcement shall be measured and paid for separately.

M & L mild steel (TMT bar)10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for copying for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia complete all as specified and directed.

M&L for Providing precast cement concrete louvres and jallies, 25mm thick set in cement mortat 1:6 type B0 1:2:4 (12.5 mm graded aggregate) (mea sured solid), including all mouldings but excluding frame and including dismantling of existing broken RCC jallies all as specified and directed by Engr-in-Charge.

BRIJ CONSTRUCTIONS

RAJAN TRADERS

RADHA ENTERPRISES

Gupta Enterprises

NAVEEN KUMAR TYAGI