SPL REPAIRS TO TOILETS AND KITCHENS IN OTM ACCN BLDG NO T11, T12, T04 AND T29 AND PROVN OF FENCING AT MAMUN MIL STN

Amount

Dismantling of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed.

Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster/wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.

Taking down, easing and adjusting shutters of any description, exceeding. 1.00 Sqm and not exceeding 2.00 Sqm each and re-fixing in the same or other opening complete all as specified and directed.

M&L for Brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

All as per description of item No 9 here in before but except bricks. Note:- Old serivecable bricks retrieved from dismantling shall be re-used.

M&L for Brickwork with flyash bricks(Old Size), straight or curved on plan to any radius in half brick thick walls, built in cement sand mortar 1:6 complete all as specified.

S&F inrepair factory made 18mm ( + 0.7mm) thick WPC cupboard shutter/ Shelf / partition, prelaminated one side with coating of ultra voilet chemical, glossy/mat finish incl. 100% termite/water proof, fire retardant, Eco friendly, density not less than 600Kg/cbm finish at all edges for making edges lipping/bending, complete as per direction of Engineer-in-Charge and manufacturer's specifications.

S&F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 30 mm all as specified and directed.

S&F Hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws.

S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including two coat of synthetic enamel paint over one coat of red oxide zinc primer, complete all as specified and directed by Engr-in-charge.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane , complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs fasteners shall be paid for separately). complete all as specified & directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and crew withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.complete all as specified and directed.

S&F for Butt hinge 100 mm long, stainless steel, medium weight with SS hinges pin and fixed complete all as specified.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed . complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F Aluminium, anodised, handles 125 mm of extruded section and fixed complete all as specified and directed.

S&F Aluminium, anodised, handles 150 mm of extruded section and fixed complete all as specified and directed.

S&F floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed

Taking up or down steel tubing of 15mm bore and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Refixing old steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed.

Supply & fixed steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling and floor complete all as specified and directed.

Supplied and fixed in repair Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 25mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

S & F Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore and fixed.

S & F Bib tap 15 mm bore long body, Brass CP, fancy type (long shank), with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified.

S & F Bib tap 15 mm bore short body, Brass CP, fancy type, with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified.

S&F in repair Chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore andcomplete all as specified.

S&F in repairs Soap dish 120mm x 85mm (material SS finish, glossy) fixed to plugs with CP brass screws complete all as specified and directed.

Supply & fixed in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc complete all as specified and directed.

Supply & fixed in repair, Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device all as specified and directed.

S&F CP Brass Hand Shower (Health Faucet) with 8 mm dia,1.2 m long Long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed.

S&F in repair CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed.

S&F stainless steel peg set of six of size 400mmx30mmx3mm size fitted with machine screw and wooden and plastic cleats (minium wt 190gms) complete all as specified and directed.

S&F Centre hole basin mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed.

Supply & fixed in repair Push botton type dual flush type PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and push botton (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basin etc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for washbasin complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing of CP coupling, waste pipe and cp brass spreder all necessary fittings, complete all as specified and directed.

S&F in repairs vitreous china urinal partition, white, of size 310mmx700 mm complete all as specified and directed.

S&F 32 mm dia, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 suitable for waste pipe etc fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Supply & fixed, PVC connection 15 mm bore with PTMT nuts of length 450 mm long all as specified and directed.

S&F in repairs PVC (SWR) floor trap, dia of outlet in 75 mm, plain excluding grating, but including jointing with solvent cement fixed in repair.

S&F PVC grating square, 150 mm (Hinge pattern and with or without hole) all as specified and directed.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps complete all as specified and directed. Note:- The measurement of pipes shall be net as fixed between the fittings including short lengths, without any allowance for cutting and waste or for the portions of pipes entering the sockets of the adjacent pipe or fitting. Fittings and accessories such as bends, branches, sockets etc.; shall be enumerated afterwards and measured separately. Rates include for all necessary extra joints, cutting and waste.

S&F 110 mm bore PVC (SWR) bends any radius, with or without excess door all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal,with excess door.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed. Note:- (i) Excavation & Earth work shall be measured and paid separately. (ii) The measurement of pipes shall be net as fixed between the fittings including short lengths, without any allowance for cutting and waste or for the portions of pipes entering the sockets of the adjacent pipe or fitting. Fittings and accessories such as bends, branches, sockets etc.; shall be enumerated afterwards and measured separately. Rates include for all necessary extra joints, cutting and waste.

All as per description of serial item No. 58.00 here-in-before but fixed to walls with suitable clamp all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius, with or without excess door all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) ,with excess door, equal or unequal

S&F 75 mm PVC (SWR) junction double, (double T), with excess door, equal or unequal all as specified and directed.

M&L for 25 mm thick (average thickness) PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor for maintaing required gradient/undulation, finished even and smoothwithout using extra cement complete all as specified and directed

M&L for 75 mm thick cement concrete 1:3:6, type C-2, (using 40mm graded stone aggregate as in sub-base to floor finished even and rough to receive floor top finish all as specified and directed.

M&L for Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed .

M&L for Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

M&L for Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 15mm thick including rounding/bull nose to expose edge, complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring not less than 18-20mm thick (size of stone shall not less than 55cmx55cm), 75mm wide white marble border alround, laid over & including 20 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, all as specified and directed..

M&L for Machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over & including 10 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50mm thick sand filling, properly levelled etc, including taking out existing interlocking paver block complete all as specified and directed.

Dismantling plain or corrugated AC sheeting, any gauge, thickness, including ridge etc as in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for false ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

S & F rolled section conforming to Fe-290 (Gde E-165) as in posts struts, purlins, rafter, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete all as specified and directed.

M&L for rendering 5 mm thick plaster in cement mortar 1:3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified and directed.

Rendering 10 mm thick on fair face of brick work or concrete surface in CM 1:6, finished even and smooth without using extra cement. complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:6 mixed with and including WPC @ 200ml/bag of cement, on brick work and concrete surfaces of walls, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and smooth using extra cement. incl making joints filled with mixture of paving bitumen & sand in 1:3) complete all as specified and directed.

M&L for three coats of white wash on newly plaster surface of walls including preparation of surfaces complete all as specified & directed

M&L for preparation of newly plastered external surfaces of walls and applying two coats of cement based paint, white or tinted, including curing before and after paint complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, including taking down existing grass, vegetation, small trees and making good the disturbed surface with cement mortar 1:3 and applying one coat of cement based paint, white or tinted including curing before & after paint complete all as specified and directed.

M&L for preparation of old surfaces of ceiling of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying two coats of white wash complete all as specified and directed.

M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer.

M&L for preparation of old painted surfaces of steel or iron of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing of Old painted surfaces of wood of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching, slightly rounded or chamferred angles and throating, complte all as specified and directed.

M&L for rendering 15 mm thick plaster in CM 1:4 mixed with intergral water proofing compound and applying 75 mm thick padding and junction coved filling of PCC M-20 Nominal Mix (1:1.5:3) of 12.50mm stone aggregate on the junction of floor and wall the surface shall than he cured and allowed to dry and applying Epoxy Resins Coating, polymer Modified Cementation coating like brush bond of frsroc, pedilite and bostic as per manufactures instruction both on floor as well as on wall complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately as 'Supply only'

Supply only liquid water proofing compound conforming to IS complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 400mmx300mmx 180mm complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4, Type B-0 (nominal mix) using 12.5mm graded aggregate, as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Pre cast cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate, as in manhole cover slab including necessary formwork complete all as specified directed.

M&L for mild steel TMT bars 8mm dia, cut to length bent to shape required including cranking bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia.complete all as specified directed.

Use and waste of formwork to soffits of WHB counter, plateform rough finished surfaces of suspended slabs such as roof slab,floor slabs landings and similar works complete all as specified and directed.

M&L for Cement concrete 1:5:10 type D-2 (using 40mm graded crushed stone aggregate) as in mass filling in sunken slab of toilets, complete all as specified and directed.

Cleaning/clearing of sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth, removing any type of blockage including desilting, descaling & dechocking of drains as well as manholes and depositing the sludge in a pit (including digging of pit) not less than 100 metres away from the site of cleaning and covering the sludge with layer of 2.5cm thick layer of earth and spraying unslacked lime on the pit and make line smooth functional all as specified and directed.

Taking down existing roof treatment of any description incl mud phuksha or PCC pedding if any (any no of layers) including removal to debries in low laying area exc 1.00 KM but n exc 2.00 KM complete all as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in leveling course on existing roof or sunken floor of toilet portion, rounded and chamfered on edges, complete all as spd and directed

APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water complete. (b) Applying Oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0 mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10 Cm side laps and 15 Cm end lap complete. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg /Sqm as prescribed by manufacture of membrane. (f) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC (1:2:4) type B-0 complete.

Excavation in post holes each not exc 0.5 cum in any type of soil, getting out, returning, filling in and ramming each or broken rubble mixed with earth around in layers not exc 25 cm in soft/dense soil complete all as specified

M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed

M&L for mild steel work as in posts and struts, angle horn in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securring wire mesh etc) including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified

S&F mild steel screw bolts machine made with hexagonal or square heads at one end and screwed the other on screwed both ends each screwed to be fitted with washers and one hexagonal or square nut langth of boltn exc 5cm long and 11 to 15 mm dia complete all as specified and directed.

Supply only chain link fencing of any mesh size, type and of any standard as approved including provision of binding wire complete all as specified and directed. Note: Weight of chain link fencing shall be ascerted through BOO convened by GE and the payment of item shall be made accordingly.

Fixing only chain link fencing including line wires of any mesh size, type and of any standard, rails, straining bolts etc including provision of binding wire complete all as specified and directed. Note: Supply of chain link fencing and S&F of FI support and MS round bars shall be measured & paid for separately.

M&L for mild steel round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bent to shape for stiffners etc and similar work complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2.00 mm dia barbs at 75mm spacing, straining and fixing to any standard rails and straining bolts incl securing or typing at crossing with and provisions of galvanised mild steel wire stapples or steel pins etc all as specified.

M&L for preparation of new or previously untreated steel or iron surfaces of any description, not exc, 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

S&F concertina coil, made to shape of dia exc 450 mm but not exc 600 mm put on top of wall in between 'Y' shape angle iron post, stretched as directed and secured with necessary binding wire complete all as spd and directed. Note : Weight per RM shall be ascertained by Board of Offrs wrt manufacturer's broucher)

Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, ceilling roses, holder, regulators, pendents, etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces, wall, floors etc.) complete all as specified and directed.

M&L for point wiring with PVC insulated fire retardant low smoke multistranded copper conductor cable of 1.5 sqmm in and including PVC concealed non metallic conduit (ISI Marked) medium grade not less than 20 mm dia with all accessories and including pressed steel sunken terminal boxes (for mounting switches / regulators/socket /bell push etc ) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke multistranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall,making good the disturbed surfaces to match with the existing complete all as specified and directed. (Phase, Neutral and Earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note :In ceiling Portion surface conduit wiring shall be carried out.

All as per description of serial item No. 112 here-in-before but one 5 pin socket out let 5/6 Amps on same board with other switches.

All as per description of serial item No. 112 here-in-before but one 5 pin socket out let 5/6 Amps on independent board.

All as per description of serial item No. 112 here-in-before but for 2 in 1 15/16 amp multipurpose socket outlet/metal plug top with 4 sqmm FRLS cable PVC insulated unsheathed multistrand f including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board.

S&F Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed.

S&F multi purpose socket outlet for 2 &3 pin, 6A, flush type complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 16 Amps 230Volts complete all as specified and directed.

S&F stepped type electronic mini /delux fan regulator 100 watt rotary step complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI (Marked) complete all as specified and directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in repair LED Lamp 9 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed.

S&F in repair 1x20 watt LED 6500K tube light fittings (4 feet long),Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

S&F in repairs LED light fittings mirror type with high out put diffuser 2 feet .10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs decorative wall light white in colour made up of poly carbonate including 9 watt retrofit LED Lamp complete all as specified and directed.

S&F in repair LED luminaire 600mmx600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in repairs LED Bulk Head luminaries 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed.

S&F in repars building security LED light luminaire 25 W, IP 66, AC 230 volts,made up of pressure di cast iron housing complete making connection using PVC insulated and sheathed3 core multi stranded copper conductor cable of size 0.50 Sqmm from ceiling rose including suitabe size of bracket of light grade pipe for mounting of fitting along with clamps,nut bolts and washers all as specified and directed.

S&F in repairs sheet metal enclousers with single pole and neutral 240 volt , 20/32 Amps, C- Series with two pin and earth plug and socket plug top complete with single pole MCBs all as specified and directed.

S&F in repairs Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 12 way, 240 volts complete all as spd and directed.

S&F in repairs Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8 way, 240 volts complete all as spd and directed.

Supply and fixing in replacement of MCB single pole and nuetral 63 Amps, 240 volts, B-series complete all as specified and directed.

Supply and fixing in replacement of MCB single pole 6 to 32 Amps, 240 volts, B-series complete all as specified and directed.

M&L in repair earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts, bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in Electrical plate No. 3 of SSR Part-I. all specified.

S&F in repairs sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and run 6.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in rigid non metalic PVC conduit complete all as specified and directed., (Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting, chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plaster and matching the surface with existing finishes all as per existing finishes complete).

S&F in repairs prewired VTPN Distribution board of size not less than 750mmx470mm with provision for MCCB as incommer 63 A 04 pole IP 54 ,04way(for incomming MCCB & outgoing MCBs), with copper busbar for each phase, with Neutral bar, Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 63 Amps MCCB, 50 KA, 4 pole, as incomer and SP MCB's of cap 63amps as outgoing complete all as specified and as directed. Note: Cost of MCCBs & MCBs, cutting, chasing, grouting in wall are included in the quoted rate.

Taking down Ceiling fan /exhaust fan, sealing cable end, dismantling blades and removing fan and blades and re-fix in the same position after & including servicing including minor repairs by cleaning/checking, greasing/oiling of bush and bearings, replacement of defective parts viz. set of split pins, cotter pins, blade screws, canopy screws of suitable size, replacement of capacitor, safety pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 sq mm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and directed.

Returning filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed.

Removing exacavated materials (soil) to a distance not exceeding 50m away and depositing where directed at a level not exceeding 1.5m above from the starting point complete all as specified and directed.

M&L for sand cushioning to the under ground cable complete as per SSR Part - I clause 19.75 complete all as specified and directed. Note: Punned thickness shall be measured for payment purposes.

M&L for brick protection using sub class 'B' bricks, laid dry, flat, over cable, longer length of brick, laid perpandicular to the cable in trenches all as specified and directed.

Supply, laying, jointing & and testing of XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor cross sectional area 25 sqmm 3.5 core, 1100 volts grade complete all as specified and directed. Notes:- Excavation & earth work, sand cushioning, brick protection shall be measured and paid separately.

Supply & laying galvanised iron tubing light grade size 40 mm dia for protection of cables with all fitting and fixed complete to pole or laid in ground complete all as specified and directed.

M/S NARESH KUMAR SHARMA (BID ID -3360916)

M/S TARA CHAND CONSTRUCTION CO. (BID ID -3360997)

satpal and brothers (BID ID -3360592)

KUMAR TRADING CO (BID ID -3360677)

M/s Northern India Construction co (BID ID -3360775)

M/S SHAKTI ELECTRIC WORKS (BID ID -3360687)

kailu construction co (BID ID -3361080)

Hans Raj Pooni (BID ID -3360631)

Bidder Name

kailu construction co

satpal and brothers

KUMAR TRADING CO

Abrol construction co

M/S SHAKTI ELECTRIC WORKS

M/S TARA CHAND CONSTRUCTION CO.

M/S NARESH KUMAR SHARMA

Hans Raj Pooni

M/s Northern India Construction co