REPAIRS/MAINT TO APPROACH PATH, PAVER BLOCK AND OTHER MISC ALLIED WORKS AT CHH SAMBHAJINAGAR MIL STATION UNDER GE(S) AHILYANAGAR

Dismantling of stone slab and tiles/ interlocking paver block laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and as directed.

M&L for machine pressed chequered cement concrete tiles, glossy finish, rubberized of size 25cm x 25cm x 25mm / 30cm x 30cmx25 mm thick as in floors, set jointed and pointed in neat cement slurry with grey cement and pigments over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified & as directed.

M&L for 60mm thick factory made chamfered edge, cement concrete paver blocks of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. Note:- Colour, design and shade shall be approved by GE.

M&L for 80mm thick factory made chamfered edge, cement concrete paver blocks of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. Note:- Colour, design and shade shall be approved by GE.

Fixing only cement concrete paver blocks as in footpath, parks, lawns, drive ways or light traffic parking etc., over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. Note: Old cement concrete paver blocks of any type and size retrieved from dismantling shall be reused under this item.

M&L at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and taking down old damaged kerb stone complete all as specified and as directed.

M&L for machine cut Kota stone flooring 18 to 22 mm thick (minimum size of kota stone slab 22"x18") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

All as per item No 7.00 here in before but 15-18 mm thick as in risers to steps and skirting laid over and including backing coat of 10mm thick in cement mortar 1:3 all as specified and as directed. Note: Risers provided to steps shall be in one piece.

M&L for machine cut Kota stone slabs 18 to 22 mm thick as in treads of steps of stair case in single piece with 2 nos V groove cutting laid over and including 10 mm thick cement screed bed in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rounding and moulding edges, rubbing and mirror polishing complete all as specified and as directed. Note: Treads provided to steps shall be in one piece.

M&L for 15-18 mm thick prepolished Granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/plateform, gate pillars, cills etc or on vertical surfaces including vertical projections, including full round mouldings the edges laid over and over and including screed bed 15mm thick in cement mortar 1:4 jointing, pointing in white cement 1:2 using marble dust with admixture of pigments to match the shade of granite and rubbing polishing to achieve mirror finish complete all as specified & directed. Note:- Colour/shade to be decided by Engineer-in-Charge / GE.