Repairs to V.T Hallow shaft Motor, Induction motor, Starter, ATS etc For 1 HP to 375 HP Daily maintenance for Various Raw Water pumping station and Water Treatment Plant for Three years Period under Nwcmc Nanded

Amount

Repairs to V.T. Pump, Centrifugal Pump, Sluice Valve ,Non Return Valve etc For 1 HP to 375 HP Daily Maintenance for Various Raw water Pumping Station and Water Treatment Plant For One Years Period under NWCMC,Nanded (Electrical Items)

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 5 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge and loading / unloading viing test and trial and load at site 7.5 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge and loading / unloading with test and trial and load at site 10 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 15 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 20 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 30 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 50 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load load at site 90 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load load at site 100 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 120 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 150 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 170 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 177 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 215 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 220 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 240 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 250 HP.

Complete Rewinding of Electric Motor by F class insulation and H.T.P. winding wire proper gauge loading / unloading with test and trial and load at site 335HP to 375 HP.

Providing and fixing moulding turning C.I. Bearing Plate 100 HP to 240 HP

Providing and fixing moulding turning C.I. Bearing Plate 250 HP to 375 HP

Complete removing and Dismentaling of Electric Motor 30 HP to 100 HP

Complete removing and Dismentaling of Electric Motor 120 HP to 250 HP

Complete removing and Dismentaling of Electric Motor 260 HP to 375 HP

Complete errection of Motor with Test and Trial 30 HP to 100 HP

Complete errection of Motor with Test and Trial 120 HP to 250 HP

Complete errection of Motor with Test and Trial 260 HP to 375 HP

Complete repairs to sartor maintenance following HP motor including etc. complete. 1 HP to 5 HP

Complete repairs to sartor maintenance following HP motor including etc. complete. 5 HP to 10 HP.

Complete repairs to sartor maintenance following HP motor including etc. complete. 12.5 HP to 50 HP.

Complete repairs to sartor maintenance following HP motor including etc. complete. 100 HP to 150 HP.

Complete repairs to sartor maintenance following HP motor including etc. complete. 170 HP to 250 HP.

Complete repairs to sartor maintenance following HP motor including etc. complete. 300 HP to 375 HP.

Complete rewinding to ATS for starter with copper wire and heavy duty F class insulation and transportation. 100 HP to 120 HP.

Complete rewinding to ATS for starter with copper wire and heavy duty F class insulation and transportation. 150 HP.

Complete rewinding to ATS for starter with copper wire and heavy duty F class insulation and transportation. 177 HP.

Complete rewinding to ATS for starter with copper wire and heavy duty F class insulation and transportation. 220 HP.

Complete rewinding to ATS for starter with copper wire and heavy duty F class insulation and transportation. 240 HP to 250 HP.

Complete rewinding to ATS for starter with copper wire and heavy duty F class insulation and transportation. 300 HP to 375 HP.

Providing and fixing motor terminal plates 50 HP to 375 HP.

Providing and fixing contractor 32 amps.

Providing and fixing contractor 70 amps.

Providing and fixing contractor 115 amps.

Providing and fixing contractor 125 amps.

Providing and fixing contractor 150 amps.

Providing and fixing contractor 185 amps.

Providing and fixing contractor 200 amp.

Providing and fixing contractor 250 amp.

Providing and fixing contractor 265 amp.

Providing and fixing contractor 300 amp.

Providing and fixing contractor 330 to 380 amp.

Providing and fixing contractor 400 amp.

Providing and fixing contractor 500 amp.

Providing and fixing contractor 550 amp.

Providing and fixing contractor 630 amp.

Providing and fixing contractor 800 amp.

Providing and fixing contractor 1000 to 1050 amp.

Providing and fixing of capacitor 25 KVAR

Providing and fixing of MCCB 1000 amp

Providing and fixing of MCCB 750 amp

Providing and fixing of MCCB 650 amp

Providing and fixing of MCCB 500 amp

Providing and fixing of MCCB 400 amp

Providing and fixing of MCCB 300 amp

Providing and fixing of MCCB 250 amp

Providing and fixing of MCCB 125 amp

Providing and fixing SFU 400 amp

Providing and fixing SFU 630 amp

Providing and fixing of H.R.C. Fuse link 400 amps

Providing and fixing of H.R.C. Fuse link 630 amps

Providing and fixing starter 5 HP to 7.5 HP

Providing and fixing starter 10 HP to 15 HP

Bearing 00 type of motor approved make 5 DE MU 322 (Kotitreeth)

Bearing 00 type of motor approved make NDE7322 (Kotitreeth)

Bearing 00 type of motor approved make DE/NDE 6318 (Kabra 60 MLD)

Bearing 00 type of motor approved make DE/NDE 6322 (Kabra 35 MLD and Kaleshwar)

Bearing 00 type of motor approved make 5 SKF -6309

Bearing 00 type of motor approved make 5 SKF -6310

Bearing 00 type of motor approved make 5 SKF -6312

Bearing 00 type of motor approved make 5 SKF -6316

Bearing 00 type of motor approved make 5 SKF -6317

Bearing 00 type of motor approved make 5 SKF -6319

Bearing 00 type of motor approved make 5 SKF -6320

Bearing 00 type of motor approved make 5 SKF -6321

Bearing 00 type of motor approved make 5 SKF -6322

Bearing 00 type of motor approved make 5 SKF -29318

Bearing 00 type of motor approved make 5 SKF -29328

Bearing 00 type of motor approved make 5 SKF -29330

Bearing 00 type of motor approved make 5 SKF -7320

Bearing 00 type of motor approved make 5 SKF -7322

Bearing 00 type of motor approved make 5 SKF N 315

Bearing 00 type of motor approved make 5 SKF N 316

Bearing 00 type of motor approved make 5 SKF N 317

Bearing 00 type of motor approved make 5 SKF N 321

Bearing 00 type of motor approved make 5 SKF N 322

Bearing 00 type of motor approved make 5 SKF -24/29324

Providing and fixing starter min stud. G.M.L.V. road size 3’ long 14 mm O.D. with nut

M.P.R.D. 2 minie make unit 50 Hp to 375 HP as per sample

Timer 800-5D 230V volt 50 Hp to 375 HP as per sample

Providing and fixing Pneumatic Minile M.D.O. 0 c timer set.

Minoc make currect converor C.T.S. (1 mox) 5 amps inter changes star DOEs not hold

Mllie ALV D2 Aux. supply 380-450 50 H H2 unit man contractor 50 Hp to 375 HP.

Providing and fixing Aden Block

Providing and fixing Element

Providing and fixing Push Button

Providing and fixing Current Transformer

Providing and fixing Digital Voltmeter

Providing and fixing Digital Ammeter

Providing and supplying 2.5 sq. mm multi stand copper wire starter wiring

Providing and fixing thermal overload CT Operated Relay suitable for 120 HP

Providing and fixing thermal overload CT Operated Relay suitable for 150 HP

Providing and fixing thermal overload CT Operated Relay suitable for 177 HP

Providing and fixing thermal overload CT Operated Relay suitable for 220 HP

Providing and fixing thermal overload CT Operated Relay suitable for 250 HP

Providing and fixing thermal overload CT Operated Relay suitable for 300HP to 375 HP

630 amp. Air breaker circuit in panel box servicing and maintenance complete job test and trial.

Providing and fixing as breaker circuit coil.

Providing and fixing as breaker circuit under voltage radiator 240 Volt.

Providing and fixing Male Contact

Providing and fixing Female Contact

Providing and fixing Gear Motor

Repairs of ACB Machinarium

Providing and fixing over load relay

F class coper wire 150 sq. mm.

Electrical motor, terminal lugs lead brizing 120 to 300 sq. mm.

Providing and supplying starter cable lugs for copper 50 sq. mm.

Providing and supplying starter cable lugs for copper 70 sq. mm.

Providing and supplying starter cable lugs for copper 95 sq. mm.

Providing and supplying starter cable lugs for copper 150 sq. mm.

Providing and supplying starter cable lugs for copper 120 sq. mm.

Providing and supplying starter cable lugs for aluminum 120 sq. mm.

Providing and supplying starter cable lugsfor aluminum 150 sq. mm.

Providing and supplying starter cable lugs for aluminum 185 sq. mm.

Providing and supplying starter cable lugs for aluminum 240 sq. mm.

Providing and supplying starter cable lugs for aluminum 300 to 380 sq. mm.

Providing and supplying starter cable lugs for aluminum 400 sq. mm.

Aluminium armored cable cutting and crimping provided Lugs.

Supplying and erecting Aluminum armored cable 3.50 sqm x 120 sqm.

Supplying and erecting Aluminum armored cable 3.50 sqm x 185 sqm.

Supplying and erecting Aluminum armored cable 3.50 sqm x 240 sqm.

Supplying and erecting Aluminum armored cable 3.50 sqm x 400 sqm.

Supplying and erecting Aluminum armored cable 3.50 sqm x 300 sqm.

Supplying and erecting A armored cable kit 120 sq. mm.

Supplying and erecting armored cable kit 180 sq. mm.

Supplying and erecting armored cable kit 240 to 300 sq. mm.

Providing supplying commissioning new ATS 3 Phase, 415 V, 50 Hz, Tapping at 0%, 50%, 65%, 80% and 100% with oil Filled 120 HP

Providing supplying commissioning new ATS 3 Phase, 415 V, 50 Hz, Tapping at 0%, 50%, 65%, 80% and 100% with oil Filled 150 HP

Providing supplying commissioning new ATS 3 Phase, 415 V, 50 Hz, Tapping at 0%, 50%, 65%, 80% and 100% with oil Filled 177 HP

Providing supplying commissioning new ATS 3 Phase, 415 V, 50 Hz, Tapping at 0%, 50%, 65%, 80% and 100% with oil Filled 220 HP

Providing supplying commissioning new ATS 3 Phase, 415 V, 50 Hz, Tapping at 0%, 50%, 65%, 80% and 100% with oil Filled 250 HP

Providing supplying commissioning new ATS 3 Phase, 415 V, 50 Hz, Tapping at 0%, 50%, 65%, 80% and 100% with oil Filled 300 HP to 375 HP

Copper Bus Bar

Providing and fixing Air circuit braker 415 volt, 50 Hz three pole 800 Amp.

Providing and fixing Air circuit braker 415 volt, 50 Hz three pole 1200 Amp.

Providing and fixing Air circuit braker 415 volt, 50 Hz three pole 2000 Amp.

Providing and fixing of MCCB 1600 amp

Providing and fixing CT 50/5 to 1600/5

Providing and fixing 63 Amps DP MCB

Providing and fixing 6 Amps, SP MCB

Supplying and erecting, XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Three and half core, stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm , complete erected on wall / on provided trenc 1 Core 630 sqmm.

Supplying and erecting, XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Three and half core, stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm , complete erected on wall / on provided trenc 1 Core 400 sqmm.

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly

GI STRIP Supplying and erecting GI strip of required size used for earthing on wall and / or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

Attending breakdown of water pump and associated accessories for fault finding including minor repairs & put in working condition & submit the report of inspection to the engineer in-charge.

Providing Temporary Rent basics Hyadra for Lifting motor 150 HP to 375 HP at site

Rotar Shaft Cutting, Bending, Turning, Welding and Allayment on Lathe machine

Providing welding as per requirement for Motor foundation nut bolts etc at site required

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 120 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 150 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no.

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no.

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 240 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no.

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no.

Repairs to V.T. Pump, Centrifugal Pump, Sluice Valve ,Non Return Valve etc For 1 HP to 375 HP Daily Maintenance for Various Raw water Pumping Station and Water Treatment Plant For One Years Period under NWCMC,Nanded Part - (A)

Complete dismantling of reduction Gear Box clarifier and alum Mixer plate at WTP 3 HP etc…… Complete

Complete dismantling of reduction Gear Box clarifier and alum Mixer plate at WTP 5 HP etc…… Complete

Providing new radial gear in phosphorus bronze metal new molding turning and milling 3 HP etc…… Complete

Providing new radial gear in phosphorus bronze metal new molding turning and milling 5 HP etc…… Complete

Providing new two star worm shaft new machining turning threading with hardening new grinding per size 3 HP etc…… Complete

Providing new two star worm shaft new machining turning threading with hardening new gardening per size 5 HP etc…… Complete

Providing and fixing new tapper roller bearing 7208 SKF as per size etc…… Complete

Providing new couple set as per gear box size with rubber bushes nut bolt 3 HP etc…… Complete

Providing new couple set as per gear box size with rubber bushes nut bolt 5 HP etc…… Complete

Complete gear box fitting with test and trail 3HP etc……

Complete gear box fitting with test and trail 5HP etc……

Providing fixing testing steel work is rolled section like joints channels, angles tees etc as per design fixing in position with and connecting plates etc and one coated of anti corrosive paints and over it two coat of painting of etc…… Complete

Desilting the supply well, intake well held work sump of water supply sewerage work etc. in wet or dry condition including lift up to 9m and lead up to 150m an required beyond the work site starkly spreading including necessary guarding etc…… Complete

Dewatering the excavated tranches and pools water in the building tranches pipe line tranches well work day using other drivers including disposition off water to stage distances as directed by (including cost of machinery and labor fitter) etc…… Complete

Rewinding of electric moto above 3HP to up to 5HP three phase up to to 1400 RPM with copper wire over having with repair lubricating of ball Bearing end bush bearing ball bearing etc…… Complete

Supplying, erecting and terminating XLPE armored cable 4 core 16 mm copper conductor with continues 5.48 sq.mm (12 swg) earth with copulate erected etc…… Complete

Foot mounted motor TEFC 1500 rpm providing erecting and given test and trail of mounted TEFC motor conforming to IS 12615:2011 of efficiency clam 103 premium having continuous rotting suitable for operating 415 Volt etc…… Complete a) 3 HP

Foot mounted motor TEFC 1500 rpm providing erecting and given test and trail of mounted TEFC motor conforming to IS 12615:2011 of efficiency clam 103 premium having continuous rotting suitable for operating 415 Volt etc…… Complete b) 5 HP

Supplying, erecting and terminal XLPE armored cable 4 core 6sq.mm copper conductor with cont. 5.48 sq.mm (12 swg) G.R. earth with Complete etc……

Providing and supplying in standard lengths ISI mark rigid unplasticized PVC pipes suitable for potable water ring joints including cost of rubber ring as per IS 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, fre

Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour material 63mm etc…… Complete

Supplying and erecting soft starters for 3 phase 415 Volts A.C. water pump up to 15 HP consting of part compact sizinrancy internal by pan contactor 400% Max allowed overload of hormonal current with compatibility with teleservices software Romox Drive on

Supplying and erecting DOl Starter 400V 3 Phase 50 cycle with no volt coil and overload element with necessary material and connected to supply up 7.5 HP etc…… Complete

Providing and Supplying V Belt etc…… Complete a) B section

Providing and Supplying V Belt etc…… Complete b) C section

Gear Oil for Gear Box Lubricant Oil etc…… Complete

Complete repair lime tank motor set full load testing etc…… Complete

W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded (Rate Excluding GST)) Part - (B) V.T. Pump (300 to 375 H.P.) Rates

Dismentling column pipes & discharge head of Water lub V.T. pump

Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed.

Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed.

Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed.

Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed.

Providing & fixing column line S.S. metel nut bolts size 1` x 6``with washers.

Providing & fixing column line S.S. metel nut bolts size 3/4` x 4``with washers.

Providing & fixing col. Pipe jointing rubber `O` Ring.

Line shaft SS. Sleeve turning, grinding & polishing & troughing as per size.

Top shaft S.S. sleeve turning, grinding & polishing & troughing as per size.

Providing & fixing pump gland for C.I.

Repair impeller Neck Ring for G.M. as per size.

Repair to bowls Neck Ring for G.M. as per size.

Bowl assembly & column Pipe cleaning.

Bowl assembly dismantling & reassembled complete as directed. full cleaning as directed.

Re-erecting repaired pump all column Pipe with shaft ,Including bowl assembly & discharge head giving test & trial of V.T. pump water lub. Including etc. on full load

Transportation charges including loading & unloading from site to workshop & back to site.

Providing & fixing S.S.410 gland bush now size comp. as per size..

Providing & fixing M.S. coupling as per size

Providing & fixing new S.S. Impeller as per old sample.

Providing & fixing bowl assembly bottom bowl G.M.bush.

Providing & fixing bowl assembly top bowl G.M. bush.

Providing & fixing new bowl assembly shaft S.S. 410 metel as per size.

Providing & moulding C.I. spider (bearning retainer) heavyduty as per size.

Providing & moulding new gun metel gland bush as per size.

Thurust bearing new 29418 or as per sample bearing assembly.

Ball bearing new 6020 or as per sample bearing assembly.

Providing new bearing assembly chamber M.S. bush for Oil level.

Providing new bearing adapter for bearing assembly as per size. .

Providing & moulding C.I. link assembly with rubber bushes as per sample.

Providing & fixing high tension bolt size 3/4 x 90 mm with nut & washer.

Repairing link assembly pully drilling & taping as per size.

Link assembly Nut Bolt size 16X60 mm

Gland rope

Oil lubricant for V.T. pump oil chamber.

Rubber packing for oil chamber

Providing & fixing Gate valve

AP - 3 bearing grease.

Providing, fixing M.S. link assembly couple as per sample .

Providing, fixing M.S. Column pipe with flange as per sample .

Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample

Providing, fixing top shaft in material SS410 as per sample .

Providing, fixing line shaft in material SS410 as per sample

W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded (Rate Excluding GST)) Part - (B) V.T. Pump (250 H.P.) Rates

Dismentling column pipes & discharge head of Water lub V.T. pump

Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed.

Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed.

Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed.

Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed.

Providing & fixing column line S.S. metel nut bolts size 1` x 6``with washers.

Providing & fixing column line S.S. metel nut bolts size 3/4` x 4``with washers.

Providing & fixing col. Pipe jointing rubber `O` Ring.

Line shaft SS. Sleeve turning, grinding & polishing & troughing as per size.

Top shaft S.S. sleeve turning, grinding & polishing & troughing as per size.

Providing & fixing pump gland for C.I.

Repair impeller Neck Ring for G.M. as per size.

Repair to bowls Neck Ring for G.M. as per size.

Bowl assembly & column Pipe cleaning.

Bowl assembly dismantling & reassembled complete as directed. full cleaning as directed.

Re-erecting repaired pump all column Pipe with shaft ,Including bowl assembly & discharge head giving test & trial of V.T. pump water lub. Including etc. on full load

Transportation charges including loading & unloading from site to workshop & back to site.

Providing & fixing S.S.410 gland bush now size comp. as per size..

Providing & fixing M.S. coupling as per size

Providing & fixing new S.S. Impeller as per old sample.

Providing & fixing bowl assembly bottom bowl G.M.bush.

Providing & fixing bowl assembly top bowl G.M. bush.

Providing & fixing new bowl assembly shaft S.S. 410 metel as per size.

Providing & moulding C.I. spider (bearning retainer) heavyduty as per size.

Providing & moulding new gun metel gland bush as per size.

Thurust bearing new 29418 or as per sample bearing assembly.

Ball bearing new 6020 or as per sample bearing assembly.

Providing new bearing assembly chamber M.S. bush for Oil level.

Providing new bearing adapter for bearing assembly as per size. .

Providing & moulding C.I. link assembly with rubber bushes as per sample.

Providing & fixing high tension bolt size 3/4 x 90 mm with nut & water.

Repairing link assembly pully drilling & taping as per size.

Link assembly Nut Bolt size 16X60 mm

Gland rope

Oil lubricant for V.T. pump oil chamber.

Rubber packing for oil chamber

Providing & fixing Gate valve

AP - 3 bearing grease.

Providing, fixing M.S. link assembly couple as per sample .

Providing, fixing M.S. Column pipe with flange as per sample .

Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample

Providing, fixing top shaft in material SS410 as per sample .

Providing, fixing line shaft in material SS410 as per sample

W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded (Rate Excluding GST)) Part - (B) V.T. Pump ( 220 H.P.) Rates

Dismentling column pipes & discharge head of Water lub V.T. pump

Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed.

Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed.

Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed.

Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed.

Providing & fixing column line S.S. metel nut bolts size 1` x 6``with washers.

Providing & fixing column line S.S. metel nut bolts size 3/4` x 4``with washers.

Providing & fixing col. Pipe jointing rubber `O` Ring.

Line shaft SS. Sleeve turning, grinding & polishing & troughing as per size.

Top shaft S.S. sleeve turning, grinding & polishing & troughing as per size.

Providing & fixing pump gland for C.I.

Repair impeller Neck Ring for G.M. as per size.

Repair to bowls Neck Ring for G.M. as per size.

Bowl assembly & column Pipe cleaning.

Bowl assembly dismantling & reassembled complete as directed. full cleaning as directed.

Re-erecting repaired pump all column Pipe with shaft ,Including bowl assembly & discharge head giving test & trial of V.T. pump water lub. Including etc. on full load

Transportation charges including loading & unloading from site to workshop & back to site.

Providing & fixing S.S.410 gland bush now size comp. as per size..

Providing & fixing M.S. coupling as per size

Providing & fixing new S.S. Impeller as per old sample.

Providing & fixing bowl assembly bottom bowl G.M.bush.

Providing & fixing bowl assembly top bowl G.M. bush.

Providing & fixing new bowl assembly shaft S.S. 410 metel as per size.

Providing & moulding C.I. spider (bearning retainer) heavyduty as per size.

Providing & moulding new gun metel gland bush as per size.

Thurust bearing new 29418 or as per sample bearing assembly.

Ball bearing new 6020 or as per sample bearing assembly.

Providing new bearing assembly chamber M.S. bush for Oil level.

Providing new bearing adapter for bearing assembly as per size. .

Providing & moulding C.I. link assembly with rubber bushes as per sample.

Providing & fixing high tension bolt size 3/4 x 90 mm with nut & water.

Repairing link assembly pully drilling & taping as per size.

Link assembly Nut Bolt size 16X60 mm

Gland rope

Oil lubricant for V.T. pump oil chamber.

Rubber packing for oil chamber

Providing & fixing Gate valve

AP - 3 bearing grease.

Providing, fixing M.S. link assembly couple as per sample .

Providing, fixing M.S. Column pipe with flange as per sample .

Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample

Providing, fixing top shaft in material SS410 as per sample .

Providing, fixing line shaft in material SS410 as per sample

W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded (Rate Excluding GST)) Part - (B) V.T. Pump (177 H.P.)

Dismentling column pipes & discharge head of Water lub V.T. pump

Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed.

Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed.

Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed.

Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed.

Providing & fixing column line S.S. metel nut bolts size 1` x 6``with washers.

Providing & fixing column line S.S. metel nut bolts size 3/4` x 4``with washers.

Providing & fixing col. Pipe jointing rubber `O` Ring.

Line shaft SS. Sleeve turning, grinding & polishing & troughing as per size.

Top shaft S.S. sleeve turning, grinding & polishing & troughing as per size.

Providing & fixing pump gland for C.I.

Repair impeller Neck Ring for G.M. as per size.

Repair to bowls Neck Ring for G.M. as per size.

Bowl assembly & column Pipe cleaning.

Bowl assembly dismantling & reassembled complete as directed. full cleaning as directed.

Re-erecting repaired pump all column Pipe with shaft ,Including bowl assembly & discharge head giving test & trial of V.T. pump water lub. Including etc. on full load

Transportation charges including loading & unloading from site to workshop & back to site.

Providing & fixing S.S.410 gland bush now size comp. as per size..

Providing & fixing M.S. coupling as per size

Providing & fixing new S.S. Impeller as per old sample.

Providing & fixing bowl assembly bottom bowl G.M.bush.

Providing & fixing bowl assembly top bowl G.M. bush.

Providing & fixing new bowl assembly shaft S.S. 410 metel as per size.

Providing & moulding C.I. spider (bearning retainer) heavyduty as per size.

Providing & moulding new gun metel gland bush as per size.

Thurust bearing new 29418 or as per sample bearing assembly.

Ball bearing new 6020 or as per sample bearing assembly.

Providing new bearing assembly chamber M.S. bush for Oil level.

Providing new bearing adapter for bearing assembly as per size. .

Providing & moulding C.I. link assembly with rubber bushes as per sample.

Providing & fixing high tension bolt size 3/4 x 90 mm with nut & water.

Repairing link assembly pully drilling & taping as per size.

Link assembly Nut Bolt size 16X60 mm

Gland rope

Oil lubricant for V.T. pump oil chamber.

Rubber packing for oil chamber

Providing & fixing Gate valve

AP - 3 bearing grease.

Providing, fixing M.S. link assembly couple as per sample .

Providing, fixing M.S. Column pipe with flange as per sample .

Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample

Providing, fixing top shaft in material SS410 as per sample .

Providing, fixing line shaft in material SS410 as per sample

W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded (Rate Excluding GST)) Part - (B) V.T. Pump (150 H.P.) Rates

Dismentling column pipes & discharge head of Water lub V.T. pump

Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed.

Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed.

Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed.

Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed.

Providing & fixing column line S.S. metel nut bolts size 1` x 6``with washers.

Providing & fixing column line S.S. metel nut bolts size 3/4` x 4``with washers.

Providing & fixing col. Pipe jointing rubber `O` Ring.

Line shaft SS. Sleeve turning, grinding & polishing & troughing as per size.

Top shaft S.S. sleeve turning, grinding & polishing & troughing as per size.

Providing & fixing pump gland for C.I.

Repair impeller Neck Ring for G.M. as per size.

Repair to bowls Neck Ring for G.M. as per size.

Bowl assembly & column Pipe cleaning.

Bowl assembly dismantling & reassembled complete as directed. full cleaning as directed.

Re-erecting repaired pump all column Pipe with shaft ,Including bowl assembly & discharge head giving test & trial of V.T. pump water lub. Including etc. on full load

Transportation charges including loading & unloading from site to workshop & back to site.

Providing & fixing S.S.410 gland bush now size comp. as per size..

Providing & fixing M.S. coupling as per size

Providing & fixing new S.S. Impeller as per old sample.

Providing & fixing bowl assembly bottom bowl G.M.bush.

Providing & fixing bowl assembly top bowl G.M. bush.

Providing & fixing new bowl assembly shaft S.S. 410 metel as per size.

Providing & moulding C.I. spider (bearning retainer) heavyduty as per size.

Providing & moulding new gun metel gland bush as per size.

Thurust bearing new 29418 or as per sample bearing assembly.

Ball bearing new 6020 or as per sample bearing assembly.

Providing new bearing assembly chamber M.S. bush for Oil level.

Providing new bearing adapter for bearing assembly as per size. .

Providing & moulding C.I. link assembly with rubber bushes as per sample.

Providing & fixing high tension bolt size 3/4 x 90 mm with nut & water.

Repairing link assembly pully drilling & taping as per size.

Link assembly Nut Bolt size 16X60 mm

Gland rope

Oil lubricant for V.T. pump oil chamber.

Rubber packing for oil chamber

Providing & fixing Gate valve

AP - 3 bearing grease.

Providing, fixing M.S. link assembly couple as per sample .

Providing, fixing M.S. Column pipe with flange as per sample .

Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample

Providing, fixing top shaft in material SS410 as per sample .

Providing, fixing line shaft in material SS410 as per sample

W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded (Rate Excluding GST)) Part - (B) V.T. Pump (120 H.P.) Rates

Dismentling column pipes & discharge head of Water lub V.T. pump

Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed.

Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed.

Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed.

Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed.

Providing & fixing column line S.S. metel nut bolts size 1` x 6``with washers.

Providing & fixing column line S.S. metel nut bolts size 3/4` x 4``with washers.

Providing & fixing col. Pipe jointing rubber `O` Ring.

Line shaft SS. Sleeve turning, grinding & polishing & troughing as per size.

Top shaft S.S. sleeve turning, grinding & polishing & troughing as per size.

Providing & fixing pump gland for C.I.

Repair impeller Neck Ring for G.M. as per size.

Repair to bowls Neck Ring for G.M. as per size.

Bowl assembly & column Pipe cleaning.

Bowl assembly dismantling & reassembled complete as directed. full cleaning as directed.

Re-erecting repaired pump all column Pipe with shaft ,Including bowl assembly & discharge head giving test & trial of V.T. pump water lub. Including etc. on full load

Transportation charges including loading & unloading from site to workshop & back to site.

Providing & fixing S.S.410 gland bush now size comp. as per size..

Providing & fixing M.S. coupling as per size

Providing & fixing new S.S. Impeller as per old sample.

Providing & fixing bowl assembly bottom bowl G.M.bush.

Providing & fixing bowl assembly top bowl G.M. bush.

Providing & fixing new bowl assembly shaft S.S. 410 metel as per size.

Providing & moulding C.I. spider (bearning retainer) heavyduty as per size.

Providing & moulding new gun metel gland bush as per size.

Thurust bearing new 29418 or as per sample bearing assembly.

Ball bearing new 6020 or as per sample bearing assembly.

Providing new bearing assembly chamber M.S. bush for Oil level.

Providing new bearing adapter for bearing assembly as per size. .

Providing & moulding C.I. link assembly with rubber bushes as per sample.

Providing & fixing high tension bolt size 3/4 x 90 mm with nut & water.

Repairing link assembly pully drilling & taping as per size.

Link assembly Nut Bolt size 16X60 mm

Gland rope

Oil lubricant for V.T. pump oil chamber.

Rubber packing for oil chamber

Providing & fixing Gate valve

AP - 3 bearing grease.

Providing, fixing M.S. link assembly couple as per sample .

Providing, fixing M.S. Column pipe with flange as per sample .

Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample

Providing, fixing top shaft in material SS410 as per sample .

Providing, fixing line shaft in material SS410 as per sample

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (3 H.P.) Rate

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (5 H.P.) Rate

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (15 H.P.) Rates

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (20 H.P.) Rates

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (30 H.P.)

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (40 H.P.) Rates

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (60 H.P.) Rates

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (90 H.P.) Rates

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (120 H.P.) Rates

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (150 H.P.) Rates

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (170 H.P.) Rate

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Centrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) Part -( C) Centrifugal pump (215 H.P.)

Complete dismantling of pump set

Providing & fixing shaft sleeve chuck nut.

Providing & fixing shaft sleeve of G.M.

Providing & fixing ball bearing 6302, 6309 SKF NCB 345 or as per sample

Providing & fixing pump shaft of S.S. 410 metal

impeller repair job including section site fixing back ring collar fitting.

Providing & fixing Neck ring of C.I.

Providing & fixing couple bolts with rubber bush as per sample.

Providing & fixing complete gland C.I. (1`` of 2nd Nos.)

Providing & fixing gland fixing bolt.

Providing & fixing water separator of G.M.

Providing & fixing bearing housing with cover C.I.

Providing & fixing packing rubber sheet.

Providing & fixing gland rope.

Providing & fixing pump key EN-9 metel

Providing & fixing couple set as per sample of C.I.

Complete reinstallations of repaired pump set with test & trial on full load.

Transportations charges including loading / unloading from site to workshop and back to site.

Providing & fixing ball bearing No. SKF 6413 or as per sample

Repairs to shaft welding turning etc.

Pump fixing nut bolt.

Providing & fixing brass type bearing bush.

Providing & fixing oil ring for G.M.

Repairs to housing chamber.

Repairs to impeller housing Necking ablong seat welding & turning etc.

Providing & fixing new G.M. metal impeller.

Providing & fixing Gate valve new size 1``

Providing & fixing nut bolt with washer 3/4`` x 4``

Repair pump complete painting

Repairs Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) PART D Air Blower (20 HP) Rate

Complete dismantling of air blower at W.T.P.

Providing & Repairing Air blower shaft two side welding turning bearing seat as per size.

Providing & fixing pinion small gear new turning teeth making complete as per size.

Providing & fixing main drive gear new turning making complete as per size.

Providing & fixing new ball bearing 6309 or as per sample

Providing & fixing new ball bearing 6311 or as per sample

Air Blower fiber blade new fitting as per size.

Air Blower side cover new bearing seat & oil seat complete repairing as per size.

Highlet packing sheet for air blower as per size

Air Blower V belt as per sample.

Air Blower transporting charges.

Complete air blower fitting with full load test & trial.

Repairs Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) PART D Air Blower (25 to 30 HP) Rate

Complete dismantling of air blower at W.T.P.

Providing & Repairing Air blower shaft two side welding turning bearing seat as per size.

Providing & fixing pinion small gear new turning teeth making complete as per size.

Providing & fixing main drive gear new turning making complete as per size.

Providing & fixing new ball bearing 6309 or as per sample

Providing & fixing new ball bearing 6311 or as per sample

Air Blower fiber blade new fitting as per size.

Air Blower side cover new bearing seat & oil seat complete repairing as per size.

Highlet packing sheet for air blower as per size

Air Blower V belt as per sample.

Air Blower transporting charges.

Complete air blower fitting with full load test & trial.

Repairs Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Rate Excluding GST) PART D Air Blower (50 HP) Rate

Complete dismantling of air blower at W.T.P.

Providing & Repairing Air blower shaft two side welding turning bearing seat as per size.

Providing & fixing pinion small gear new turning teeth making complete as per size.

Providing & fixing main drive gear new turning making complete as per size.

Providing & fixing new ball bearing 6309 or as per sample

Providing & fixing new ball bearing 6311 or as per sample

Air Blower fiber blade new fitting as per size.

Air Blower side cover new bearing seat & oil seat complete repairing as per size.

Highlet packing sheet for air blower as per size

Air Blower V belt as per sample.

Air Blower transporting charges.

Complete air blower fitting with full load test & trial.

Repairs of 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded Rate Excluding GST) PART E (Rate for 80 mm)

Dismantling of Air valve at existing spot.

Providing new fixing Air lock plate in M.S. plate as per size.

Providing & fixing rubber `O` ring in Air valve as per size.

Providing & fixing gun metal lock ring bush for air ball locking.

Providing & fixing wooden ball with rubber coating bowl new.

Air Valves stand pipe welding on existing spot with mobile welding & generator set.

Providing & fixing rubber packing 4 mm.

Providing & fixing M.S.Plate for Valve safety as per size.

Providing & fixing nut bolts (5/8 x 3``) 16X75 mm

Air Valves fitting & test & trial on existing size.

Transporting charges workshop to site & back to workshop.

Repairs of 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded Rate Excluding GST) PART E (Rate for 100 mm)

Dismantling of Air valve at existing spot.

Providing new fixing Air lock plate in M.S. plate as per size.

Providing & fixing rubber `O` ring in Air valve as per size.

Providing & fixing gun metal lock ring bush for air ball locking.

Providing & fixing wooden ball with rubber coating bowl new.

Air Valves stand pipe welding on existing spot with mobile welding & generator set.

Providing & fixing rubber packing 4 mm.

Providing & fixing M.S.Plate for Valve safety as per size.

Providing & fixing nut bolts (5/8 x 3``) 16X75 mm

Air Valves fitting & test & trial on existing size.

Transporting charges workshop to site & back to workshop.

Repairs of 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded Rate Excluding GST) PART E (Rate for 125 mm)

Dismantling of Air valve at existing spot.

Providing new fixing Air lock plate in M.S. plate as per size.

Providing & fixing rubber `O` ring in Air valve as per size.

Providing & fixing gun metal lock ring bush for air ball locking.

Providing & fixing wooden ball with rubber coating bowl new.

Air Valves stand pipe welding on existing spot with mobile welding & generator set.

Providing & fixing rubber packing 4 mm.

Providing & fixing M.S.Plate for Valve safety as per size.

Providing & fixing nut bolts (5/8 x 3``) 16X75 mm

Air Valves fitting & test & trial on existing size.

Transporting charges workshop to site & back to workshop.

Repairs of 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded Rate Excluding GST) PART E (Rate for 150 mm)

Dismantling of Air valve at existing spot.

Providing new fixing Air lock plate in M.S. plate as per size.

Providing & fixing rubber `O` ring in Air valve as per size.

Providing & fixing gun metal lock ring bush for air ball locking.

Providing & fixing wooden ball with rubber coating bowl new.

Air Valves stand pipe welding on existing spot with mobile welding & generator set.

Providing & fixing rubber packing 4 mm.

Providing & fixing M.S.Plate for Valve safety as per size.

Providing & fixing nut bolts (5/8 x 3``) 16X75 mm

Air Valves fitting & test & trial on existing size.

Transporting charges workshop to site & back to workshop.

Repairs of 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded Rate Excluding GST) PART E (Rate for 200 mm)

Dismantling of Air valve at existing spot.

Providing new fixing Air lock plate in M.S. plate as per size.

Providing & fixing rubber `O` ring in Air valve as per size.

Providing & fixing gun metal lock ring bush for air ball locking.

Providing & fixing wooden ball with rubber coating bowl new.

Air Valves stand pipe welding on existing spot with mobile welding & generator set.

Providing & fixing rubber packing 4 mm.

Providing & fixing M.S.Plate for Valve safety as per size.

Providing & fixing nut bolts (5/8 x 3``) 16X75 mm

Air Valves fitting & test & trial on existing size.

Transporting charges workshop to site & back to workshop.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (80 mm dia) Rate

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (100 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (150 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (200 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (250 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (300 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (400 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (450 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (500 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST ((600 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (700 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs 80 mm dia to 900 mm dia sluice valve in water supply pumping station, W.T.P.within corporation limit in NWCMC,Nanded (Rate Excluding GST (PART F) (900 mm dia)

Dismantling of sluice valve at existing spot.

Providing &fixing of EN-9 metal sluice valve, spindle rod as per old sample.

Providing & fixing of gun metal spindle rod check nut as per old sample.

Making sluice valve flap chuck nut bracket as per old sample.

Providing & fixing sluice valve fixing nut bolts with washer as per required size.

Sluice valve gland body reboring & new bush fitting.

Sluice valve driving pipe shaft cutting & M.S. coupling welding.

Sluice valve drive spinner new providing.

Providing & fixing 4mm thick rubber packing.

Refitting sluice valve test & trial on load at site.

Repairs Gear Box sluice valve 450 to 900 mm dia in water supply pumping station, W.T.P. within corporation limit NWCMC,Nanded Rate (Excluding GST) (PART G) (450 mm dia Rate)

Complete Dismantling of sluice valve at existing spot.

Providing &fixing pinion gear as per old sample.

Providing & fixing drive gear as per old sample.

Providing & repairing to 90mm sluice valve spindal rod complete size at 2 mtr. To 90mm OD or as per old sample.

Providing & moulding new gun metal chuck nut

Providing & fixing oil seat in gear box. as per old sample.

Providing & fixing thrust ball bearing no. 51220 SKF. or as per old sample.

Providing & fixing driving wheel as per old sample.

Providing & fixing rubber packing.

complete valve fitting with test & trial

Transportation charges.

JCB Charges

Dewatering

Dismantling channel valve at existing spot

Providing & fixing channel valve spindle rod as per sample.

Providing & fixing channel valve Gun metal chuck nut as per sample.

Repairs channel valve horizontal flap as per sample.

Repairs channel valve base foundation as per sample.

Complete fitting & testing channel valve at existing spot

Dismantling gate valve as per sample.

Providing & Fixing gate valve spindle rod as per sample.

Providing & Fixing gate valve as per sample.

Providing & Fixing gate valve M.S.plate as per sample.

Providing & fixing gate valve Gun metal chuck nut as per sample.

Providing & Fixing gate valve brass seal plate as per sample.

Complete fitting & testing gate valve at existing spot

Repairs Gear Box sluice valve 450 to 900 mm dia in water supply pumping station, W.T.P. within corporation limit NWCMC,Nanded Rate (Excluding GST) (PART G) (600 mm dia Rate)

Complete Dismantling of sluice valve at existing spot.

Providing &fixing pinion gear as per old sample.

Providing & fixing drive gear as per old sample.

Providing & repairing to 90mm sluice valve spindal rod complete size at 2 mtr. To 90mm OD or as per old sample.

Providing & moulding new gun metal chuck nut

Providing & fixing oil seat in gear box. as per old sample.

Providing & fixing thrust ball bearing no. 51220 SKF. or as per old sample.

Providing & fixing driving wheel as per old sample.

Providing & fixing rubber packing.

complete valve fitting with test & trial

Transportation charges.

JCB Charges

Dewatering

Dismantling channel valve at existing spot

Providing & fixing channel valve spindle rod as per sample.

Providing & fixing channel valve Gun metal chuck nut as per sample.

Repairs channel valve horizontal flap as per sample.

Repairs channel valve base foundation as per sample.

Complete fitting & testing channel valve at existing spot

Dismantling gate valve as per sample.

Providing & Fixing gate valve spindle rod as per sample.

Providing & Fixing gate valve as per sample.

Providing & Fixing gate valve M.S.plate as per sample.

Providing & fixing gate valve Gun metal chuck nut as per sample.

Providing & Fixing gate valve brass seal plate as per sample.

Complete fitting & testing gate valve at existing spot

Repairs Gear Box sluice valve 450 to 900 mm dia in water supply pumping station, W.T.P. within corporation limit NWCMC,Nanded Rate (Excluding GST) (PART G) (700 mm dia Rate)

Complete Dismantling of sluice valve at existing spot.

Providing &fixing pinion gear as per old sample.

Providing & fixing drive gear as per old sample.

Providing & repairing to 90mm sluice valve spindal rod complete size at 2 mtr. To 90mm OD or as per old sample.

Providing & moulding new gun metal chuck nut

Providing & fixing oil seat in gear box. as per old sample.

Providing & fixing thrust ball bearing no. 51220 SKF. or as per old sample.

Providing & fixing driving wheel as per old sample.

Providing & fixing rubber packing.

complete valve fitting with test & trial

Transportation charges.

JCB Charges

Dewatering

Dismantling channel valve at existing spot

Providing & fixing channel valve spindle rod as per sample.

Providing & fixing channel valve Gun metal chuck nut as per sample.

Repairs channel valve horizontal flap as per sample.

Repairs channel valve base foundation as per sample.

Complete fitting & testing channel valve at existing spot

Dismantling gate valve as per sample.

Providing & Fixing gate valve spindle rod as per sample.

Providing & Fixing gate valve as per sample.

Providing & Fixing gate valve M.S.plate as per sample.

Providing & fixing gate valve Gun metal chuck nut as per sample.

Providing & Fixing gate valve brass seal plate as per sample.

Complete fitting & testing gate valve at existing spot

Repairs Gear Box sluice valve 450 to 900 mm dia in water supply pumping station, W.T.P. within corporation limit NWCMC,Nanded Rate (Excluding GST) (PART G) (900 mm dia Rate)

Complete Dismantling of sluice valve at existing spot.

Providing &fixing pinion gear as per old sample.

Providing & fixing drive gear as per old sample.

Providing & repairing to 90mm sluice valve spindal rod complete size at 2 mtr. To 90mm OD or as per old sample.

Providing & moulding new gun metal chuck nut

Providing & fixing oil seat in gear box. as per old sample.

Providing & fixing thrust ball bearing no. 51220 SKF. or as per old sample.

Providing & fixing driving wheel as per old sample.

Providing & fixing rubber packing.

complete valve fitting with test & trial

Transportation charges.

JCB Charges

Dewatering

Dismantling channel valve at existing spot

Providing & fixing channel valve spindle rod as per sample.

Providing & fixing channel valve Gun metal chuck nut as per sample.

Repairs channel valve horizontal flap as per sample.

Repairs channel valve base foundation as per sample.

Complete fitting & testing channel valve at existing spot

Dismantling gate valve as per sample.

Providing & Fixing gate valve spindle rod as per sample.

Providing & Fixing gate valve as per sample.

Providing & Fixing gate valve M.S.plate as per sample.

Providing & fixing gate valve Gun metal chuck nut as per sample.

Providing & Fixing gate valve brass seal plate as per sample.

Complete fitting & testing gate valve at existing spot

Part H Providing & constructing B.B. masonry valve chambers in NWCMC,Nanded (Rate Excluding GST) (PART H)

Providing & constructing B.B. masonry valve chambers with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation BB masonry in c.m. 1:5 prop….……..etc complete. I. As above of 0.9 x 0.45 m internal size and depth up to 1.20 m with Pre cast RCC cover.

II. As above of 1.5 x1.5 m internal size and depth up to 1.50 m with Pre cast RCC cover.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 200 mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 250 mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 300 mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 350 mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 400mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 450 mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 500 mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 600 mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 700 mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

Repairs 200 mm to 900 mm N.R.valve in raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate Excluding GST) (PART I) (Rate for 900 mm)

Dismantling of N.R.V. at existing spot.

Providing new fixing of N.R.V. door plates in E.N.9 plates.

Providing & fixing gun metal colour for fixing doors for N.R.V.

Providing & fixing rubber seal to N.R. Valve plate.

Providing S.S.Road for hanging door is N.R.V.

Providing & fixing S.S. bush in N.R.V. door for hanging rod with reboring

Providing & fixing 4mm rubber packing.

Providing & fixing 20mmx75mm nut bolt with washer.

Refitting of N.R.Valve at existing spot with test & trial.

National Electrical Engineer Nanded