SPECIAL REPAIR TO SANITARY FITTINGS, FLOORING, TILLING IN CERTAIN TOILETS AT 10 AFH AND PROVN AIR CONDITIONER AT RT CABIN AND PROVN OF LED BASED HIGH BAY LIGHTS AT CERTAIN LOCATIONS AT AF STN HASIMARA

Amount

Dismantling of cast iron or reinforced, PVC (SWR) pipe of any type, complete all as specified and directed.

S &F 110mm bore PVC (SWR) soil, waste and vent pipes, single socked, in any length, with rubber ring joints, fixed in floors or trenches, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S &F 75 mm bore PVC (SWR) soil, waste and vent pipes, single socked, in any length, with rubber ring joints, fixed in floors or trenches, complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F in repairs 15mm bore stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repairs 15mm bore stops valves, cast copper alloy, chromium plated fancy type, with capstan head screwed down, high pressure, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repairs 15mm bore brass chromium plated, angle cock, screwed fo iron pipe, complete all as specified and directed.

S&F in reapir 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper ally, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore pillar taps fancy type, swan neck 2 way cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 125mm round ABS overhead shower with 225mm round SS arm, complete all as specified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to any type of pipe or union, complete all as specified and directed.

S & F in repairs PVC body cabinet box mirror of size 330mm X 430mm in PTMT alloy of approved design and pattern, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' trap, includig connecction to outgoing drain and flushing pipe, anti syphonic pipe with and including water closet seat cover complete but excluding flushing cestern & flush pipe including making good damaged/distrubed surfaces, complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white, flat back, size 630 x 450mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand including pedestal, complete all as specified and directed.

S & F 32mm waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S & F in repairs vitreous china counter type wash hand basin, white, oval, bowl size 470x470x200mm, complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed.

S&F in repair PVC SWR 'P' trap in 110mm bore pipe, complete all as specified and directed.

S & F in repairs vitreous china urinal, bowl type flat back of size 465 x 355 x 265mm (minimum) white, with grating and union for discharge pipe, complete all as specified and directed.

S & F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel, chromium plated, suitable for 15mm bore pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F 110mm dia steel grating, fixed with white cement, complete all as specified and directed.

S&F 75mm dia steel grating, fixed with white cement, complete all as specified and directed.

S&F 110mm dia gratings of PTMT (minimum weight 25gms), complete all as specified and directed.

S&F in repair 15mm bore PTMT connection pipe, 45cm long fitted with brass unions for connect iron pipe to PVC pipe on both ends, complete all as specified and directed.

S&F in repair urinal spreader of PTMT, any colour for fixing with 15mm bore pipe (minimum weight 60gms), complete all as specified and directed.

S&F 32mm bore PVC waste pipes, 900mm long, complete all as specified and directed.

S&F for low density polyethylene waste pipe 40mm for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts, 75cm long, suitable for steel sink waste complete, complete all as specified and directed.

S&F in repairs 15mm bore bib tap, standard, of PTMT, any colour high pressure screwed for iron pipe and fixed (minimum weight, 90gms), complete all as specified and directed.

S&F in repairs 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, 32mm bore PVC flush pipe including brackets and connections to pipe, complete all as specified and as directed.

S & F in repairs, 15mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight - 142 gms), complete all as specified and directed.

S & F in repairs, 20mm bore, ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight - 210 gms), complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, with lid, hoisted and fixed in position all as specified in SSR Part-I. The date of installation to be mentioned on tank with synthetic enamel paint, letter size 10cm high in white colour, over a black background of appropriate size as (DD/MM/YR) with sign from occupant including dismantling of old unserviceable water tank, complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks triple layered, (cylindrical vertical with closed top) with lid, hoisted and fixed in position all as specified in SSR Part-I. The date of installation to be mentioned on tank with synthetic enamel paint, letter size 10cm high in white colour, over a black background of appropriate size as (DD/MM/YR) with sign from occupant including dismantling of old unserviceable water tank, complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

Refixing old steel tubing of 15mm bore and connections in new or old position (walls, ceilings, floors etc.), complete all as specified and directed. (Note:Serviceable steel tube obtained from taking down shall be re-used.)

S & F 15mm bore galvanized steel tubes, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

Refixing old steel tubing of 20mm bore and connections in new or old position (walls, ceilings, floors etc.), complete all as specified and directed. (Note:Serviceable steel tube obtained from taking down shall be re-used.)

S & F 20mm bore galvanized steel tubes, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

S&F in repairs 15mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs 20mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

S&F stainless steel soap dish, to walls with necessary screws etc., complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide, with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair of 75mm dia cast iron floor trap/nahani trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B-1, complete all as specified and directed.

S&F in repair brass bottle traps of 32mm bore for wash basin with inlet and outlet screwed for pipe or connections, including necessary packing, union and cap, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. (Note: Plastering work at any height necessary scfolding, safety belts required shall be provided by the contractor and quoted rate shall deemed to be included.)

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing surface of new plastered or unplastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whitening primer, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for coloured glazed ceramic tiles area of each tile glazed ceramic tiles in 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry, on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry to match the shade of the tile including 10mm thick backing coat in CM (1:4), complete all as specified and directed.

M&L for coloured Non - skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6), for laying floor finishes, complete all as specified and directed.

Hacking out old broken glass any thickness size quality or description from metel frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane, complete all as specified and directed.

Taking down chowkat with shutter n.exc. 1.5 sqm each and removing from site of work, complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing, complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC strip of 20mm width stuck in insde with solvent cement for stiles and plain colour PVC sheets for top rail; lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F 100mm size, medium weight, cold rolled stainless steel butt hinges, complete all as specified and directed.

S&F 150mm size aluminium, anodized barrel tower bolts of extruted section and fixed, complete all as specified and directed.

S&F 150mm size extruded aluminium door handles, fabricated type, complete all as specified and directed.

Demolition of bricks work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete aritcles, complete all as specified and directed.

M&L for brickwork with old size brick, fly ash bricks, sub-class 'B' bricks, straight or curved on plan exc. 6m mean radius, built in CM (1:6), complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Use and waste of formwork to soffits of suspedded slabs such as roof slabs, floor slabs landings, lintel beam and similar work, vertical or to batter, rough finished flat surfaces of concrete, complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n. exc. 10cm, complete all as specified and directed.

M&L for RCC (1:2:4) (nominal mix) type B1 (using 20mm graded crushed stone aggregatet) slabs supported on walls,beams, lintels and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for 20 to 22mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like, fixed in CM (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

S&F in repair wash down water closet EWC (cascade type) vitrious china, white, one piece (incl flush cistern, seat cover) with all fittings & fixture complete and fixing with outlet pipe, complete all as specified and directed.

Demoliton of un-reinforced cement concrete in ground floors and pavings n. exc. 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C- 2, (using 40mm graded crushed stone aggregatet) as in floors, pavings or plinth protection etc., complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc., complete all as specified and directed.

M&L for point wiring with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistrand passing through including PVC conduit concealed on wall /floor and surface type on ceiling of size not less than 20mm dia with concealed modular box suitable for logic modular switches , sockets , etc and logic modular white plates, surroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sqmm as earth wire connected to common earth dully for light/fan, complete all as specified and directed. Note: - (i) Rate quoted shall include for cost of MS box, cover plate provision of blank plates as per site requirement and concealed in wall. (ii) Cutting and sinking of boxes and making good to the walls shall deemed to be included in the unit quoted rate.

All as per ser item No. 81.00 here-in before but with 2.5 Sqmm PVC insulated copper stranded cable FRLSH type for one 15 Amp 6 pin socket outlet point including PVC insulated copper cable 2.5 Sqmm FRLSH type stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes, complete all as specified and directed.

S&F switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed.

S&F switch modular type, single pole, one way, 15/16 Amps, one module complete all as specified and directed.

S&F socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type, 2 module, completes all as specified and directed.

S&F ceiling rose of size 65 x 50mm, surface bake-lite, three terminal, complete all as specified and directed.

S&F LED tube 10 W tube light fitting LED batten with square profile extruded and polycarbonate connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length including connection, complete all as specified and directed.

Supply and install cassette type units 3.0/3.3 TR cooling capacity indoor/outdoor complete cordless remote control unit with BLDC compressor units suitable for 50 Hz ac supply complete with fixing arrangement for in-door and outdoor unit copper tubing for suction and discharge required size as per manufacture specification dully insulated up to 6.0 mtrs each including first charging of refrigerant gas(R- 410A) up to required level, complete all as specified and directed. Note: The unit quoted rate shall deemed to be included the following:- (a) Necessary fixing arrangement required for installation of AC at ceiling mounted in existing building at 2/3 ED floor including necessary addn/altn in false ceiling panels and its fixing arrangement and mounting arrangement for outdoor complete making good to disturbed surface/false ceiling panels/ required replacement of false celling fennels max up to 2.0 Sqm. (b) The copper tubing for suction and discharge required size as per manufacture specification dully insulated up to 6.0 Mtrs including brass flare nuts. (c) PVC copper cable conductor 3.5-4.0 core of suitable size/rating required at site for installation of Indoor-Out door unit as per manufacture specification (d) PVC drain pipe heavy duty fixed on wall with MS saddles complete with proposer insulation as per manufacture specification. (e) Out door bracket powder coated heavy duty complete with fixing arrangement on wall/floor as per site and manufacture specification. Note: 02 (a) Contractor has to submit the make type/star rating/color of brand for approval from GE. Cost escalation with respect to minor variation of cooling capacity over and above described in BOQ as per the market availability/as per brand submitted by the contractor shall be deemed to be included in quoted rate. Contractor has to confirm the market availability of nominal cooling capacity /type of compressor/eco friendly CFC refrigerant. (b) Nominal cooling capacity of complete AC unit is varies as per brand /Star rating / Local market availability. Quoted rate for refrigerator is deemed to be included the variation of colling capacity maximum up to 10 % mentioned in BOQ.

S & F copper tube 1/2", complete all as specified and directed.

S & F insulation tube 1/2", complete all as specified and directed.

Supply and fix LED high bay light fitting 150 watt indoor type white colour fixing on high rise steel trusses including mounting arrangement fixed on celling with necessary hook/chain/hanging the fitting from ceiling/roof/angle Iron frame structure including connecting with 2.5 Sqmm single core multistranded copper conductor cable drawn through PVC flexible conduit from ceiling rose/connector to fitting, fixing on hanger/indoor type sports shelter complete with driver, complete all as specified and directed. Note: Necessary scaffolding for fixing of light into high rise hanger shall be included in quoted rate.

Sch 'A' Part-II (Schedule of Credit) Note: An amount of Rs.21210.00 indicated in tender documents as Schedule of Credit shall be deducted from the total quoted amount of Boq to arrive at the contract sum.

M/S I P GROUP

MAA TARA TRADING

M/S. VINITA CONSTRUCTION

M/S ANNI ENTERPRISE

M/S MANODEEP CONSTRUCTION

M/S SANMILAN NANDI

MAJUMDER ENTERPRISE

SHRI SURAJIT SIKDER