EOR to FSL Building Madhuban Chowk Delhi during 2022-23. (SH- Renovation of Room No.210 in FSL Building).

Amount

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in. Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building, all complete as per the architectural drawings, with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4(1 cement: 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curring and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick.

Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) 12mm thick commercial ply conforming to IS:1328 BWR type.

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness

Providing and fixing manually operated roller blind screen classic 3% of Aerolux, Vista, Marvel, Hunter dougles or equivalent having head rail of size 34mm x 12mm with chain mechanism and bottom rail of OD 20mm size of aluminum extruded rail powder coated in desired shade complete in all respect, (Fabric specification 75% PVC, 25% Polyester, openness factor 3%,fabric weight 470Gsm, fabric thinness 0.60mm to .70 mm, fire resistance NFPA 701, BS 5867 Part -2 type-A Colour fastness to light of 6 grade ) as per direction of Engineer-in-charge.

Credit to work for dismantled aluminium partition/doors/windows/fixed glazing/false ceiling etc. which shall be for the property of the contractor and should be removed from the site of work as per the directions of the Engineer-in-Charge (Nothing extra shall be paid on Account of Carriage).

Credit of dismantling G.I false ceiling etc. Which shall be the property of the contractor and Should be Removed from the site of work as per Direction of Engineer-in-Charge (Nothing extra shall be paid on Account of Carriage)

Providing and fixing 19mm thick commercial block board (B.W.P) conforming to IS 1659 for wall pannelling, cupboard, tables and any other furniture item etc including synthetic resin adhesive nails & necessary screws etc complete as per direction of Engineer-in-Charge.

Supplying, and fixing in position of Free standing partition of D-67mm height 1500mm and should be minimum of 65-67mm thick. Partition inner frame is 1.2-1.5mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.2-1.5mm thick. All Panels/trims shall be powder coated with 50 micron. Aluminum trims are elegantly fixed with hidden connectors on the partition. The frame work shall be fitted with 8mm thick pre laminated Particle board of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Complete as per specification mentioned above under the guidance of Engineer in charge. Size :- L-2100mm x D-67mm x H-1500mm

Supplying, and fixing in position of Free standing partition of D-67mm height 1500mm and should be minimum of 65-67mm thick. Partition inner frame is 1.2-1.5mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.2-1.5mm thick. All Panels/trims shall be powder coated with 50 micron. Aluminum trims are elegantly fixed with hidden connectors on the partition. The frame work shall be fitted with 8mm thick pre laminated Particle board of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Complete as per specification mentioned above under the guidance of Engineer in charge. Size :- L-1500mm x D-67mm x H-1500mm

Supplying, and fixing in position of Storage unit . Storage. The modular storage unit top shall be made from 18 mm thick MDF board With Laminate and rest of the sides as well as shelves and shutter to be made up of 18 mm thick MDF board With Laminate while back to be made of 9 mm thick MDF board With Laminate. All edges to be provided with 2 mm thick PVC lipping . Each unit to have openable shutters with locking provision. Complete as per specification mentioned above under the guidance of Engineer in charge. Size :- L-5990mm x D-450mm x H-2340mm

Supplying, and fixing in position of Storage unit . Storage. The modular storage unit top shall be made from 18 mm thick MDF board With Laminate and rest of the sides as well as shelves and shutter to be made up of 18 mm thick MDF board With Laminate while back to be made of 9 mm thick MDF board With Laminate. All edges to be provided with 2 mm thick PVC lipping . Each unit to have openable shutters with locking provision. Complete as per specification mentioned above under the guidance of Engineer in charge. Size :- L-3090mm x D-550mm x H-2340mm

Supplying, and fixing in position of Storage unit . Storage. The modular storage unit top shall be made from 18 mm thick MDF board With Laminate and rest of the sides as well as shelves and shutter to be made up of 18 mm thick MDF board With Laminate while back to be made of 9 mm thick MDF board With Laminate. All edges to be provided with 2 mm thick PVC lipping . Each unit to have openable shutters with locking provision. Complete as per specification mentioned above under the guidance of Engineer in charge. Size :- L-1750mm x D-550mm x H-2340mm

Supplying, and fixing in position of Storage unit . Storage. The modular storage unit top shall be made from 18 mm thick MDF board With Laminate and rest of the sides as well as shelves and shutter to be made up of 18 mm thick MDF board With Laminate while back to be made of 9 mm thick MDF board With Laminate. All edges to be provided with 2 mm thick PVC lipping . Each unit to have openable shutters with locking provision. Complete as per specification mentioned above under the guidance of Engineer in charge. Size :- L-300mm x D-300mm x H-2340mm

Supplying, and fixing in position of Side Storage unit . Storage size :- L-900mm x D-450mm x H-750mm. The modular storage unit top shall be made from 25 mm thick Prelaminate Piratical board With Laminate and rest of the sides as well as shelves and shutter to be made up of 18 mm thick Prelaminate Practical board With Laminate while back to be made of 9 mm thick Prelaminate Practical board With Laminate. All edges to be provided with 2 mm thick PVC lipping . Each unit to have openable shutters with locking provision. Complete as per specification mentioned above under the guidance of Engineer in charge.

M P BHATIA

Shreyansh Siddharth

DILIP KUMAR SAH

Rohit Kumar