PROVN OF STORAGE SHED FOR BLDG No P 132 LGS AND CERTAIN MINOR WORKS AT AFS HAKIMPET UNDER GE AF HAKIMPET

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B0 (using 12.50 mm graded granite stone aggregate) in sub base of tile all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes / skirting, complete all as specified and directed by Engineer-in-Charge.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M&L for Digital Glazed ceramic Coloured tiles 300 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick plastering in CM 1:4 as backing layer complete all as specified and directed.

S & F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75mm outlet complete all as specified and directed.

Supply and fix Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and Union for discharge pipe, urinal spreader valve complete all as directed by Engineer-in-Charge.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified

S&F of Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms)

S&F 15mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. Make :- ESS ESS CROMA Cat No C 204 or Equivalent of JAQUAR/PARKO

S & F PVC connections 15 mm dia, 450 mm long with PTMT nuts, complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes (soil, waste and vent pipes) single socketed, in any length with rubber ring joints, fixed to walls or laid in floor/trenches etc, complete all as specified and directed.

S&F 15 mm bore bib tap long shank brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe fixed complete all as specified and directed.

S&F 15mm bore pillar tap brass chromium plated screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and directed.

S & F fancy type CP tubular towel rail brass cromium plated,D type, 61cm long between flanges complete all as specified and directed

Supply and fix vitreous china wash down water closet pan (Pedestal type), white including removing the existing one complete and making good all connections as in repairs all as specified and directed.

S/F health faucet with fluxi pipe and hand shover with standard length hose fitted to the tap.make JAQUAR Code no.563 or equivalent as approved by GE

S&F Vitrreous china wash basins, white, flat back, size 580x450mm including brackets, waste fittings, brass, chromium plated 32mm with long screwed shanks and fly nuts, flanged one end and other end fixed, Pillar tap 15mm bore, cast copper alloy, chromium plated fancy type screwed type high pressure, with long screwed shanks and fly-nuts, PVC connections pipe of 15mm bore 45cm long, Angle Stop Valve of PTMT 15mm bore any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms) complete all as specified and directed.

S&F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.

S&F grating square 150mm size of PTMT (minimum 100 gems) complete all as specified.

S & F GI tubing medium grade 15 mm bore with all fittings, fixed to walls & ceilings or laid in floor etc.

All as per item 22 above, but 20 mm bore GI pipe.

S&F Mild steel Stairs (framed ) inculding stringers, treades, landing, balusters,hand rails stand for water coolers etc . Inculding cleats, brackets , etc. conforming to Fe-290 Gde-E-165, complete all as specified and directed.

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - W (Gde E-250)quality-A complete all as specified and drected.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Cutting holes in Stone masonry walls/brick masonry walls built in cement mortar for inserting hold fasts, depth of embedded portion of hold fast exceeding 10 cm and not exceeding 20 cm including provision of PCC 1:2:4 Type B1 for bed blocks / filling and making good in cement mortar 1:3 rendering / glazed wall tiles including finishing to wall and wall painting complete to match with the adjoining / existing surface complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth and area not exceeding 10 Sqm on plan for foundations or manholes etc., and getting out in soft/ loose soil complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete, manholes / drains etc. complete all as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6M mean radius built in CM (1:6) as in manhole

M&L for providing and fixing precast cement concrete louvres and jallies type B0, 1:2:4 (12.5mm graded aggregate), 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4, type B1 (using 20 mm graded crushed granite stone aggregates) as in copings etc, complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 , finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement based paint on plastered surfaces complete all as directed.

Returning, filling in and including spreading, levelling, watering, well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Surface dressing not exceeding 15 cm deep in soft/ loose soil all as specified and directed.

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified and directed

M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete or for filling in sunken floors etc, complete all as specified and directed.

M&L for hard core of guage not exceeding 63 mm deposited spread, levelled in layers not exceeding 15 cm thick watered and rolled/rammed to a true surface with broken boulders or stones of 75mm thick, complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type D2, 1:4:8 (using 40mm graded crushed granite stone aggregates) as in sub base, floors, pavings etc, complete all as specified and directed.

M&L 40 mm thick cement concrete 1 : 2 : 4 type B-1 (using 20mm graded crushed stone aggregate) laid in base, cement concrete surface even and smooth with out using extra cement. all as specified and directed

S&F Steel work as in tubular trusses, stanchions including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified and directed

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.

M&L for steel rolling shutters with 1.25 mm thick laths, with ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer: erected in position as indicated, gear operated type with bevel gear box and crank handle including accessories and fixing of guide to appropriate direction complete as all specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm and not exc 4 Sqm each with shutters without taking off shutters from the frames complete all as specified and directed.

Taking down chowkats or frames n exc1.5 Sqm each with shutters without taking off shutters from the frames complete all as specified and directed.

Supply and fix factory made UPVC window shutters sliding in three tracks / rails in which 02 shutters made up of toughened glass 5.5mm thick and one shutte with stainless steel wire mesh of aperture not exc 1.40mm complete sound proof and as per manufactureres instructions complete all as specified and as directed by Engineer-in-Charge.

Supply and fix factory made UPVC window shutters side opening wth lock and lever in three tracks / rails in which 02 shutters made up of toughened glass 5.5mm thick and one shutter sound proof and as per manufacturer instructions including all fittings and hardwares such as hinges, handles, peg stays, stoppers, locks and making good touchups to wall paintings as required at site condition all as specified and as directed by Engineer-in-Charge.

Roughening surfaces of old concrete floor / cemented wall susrfaces by picking, sweeping, clean and washing down with water to remove dust etc complete all as specified.

M&L for 100mm thick PCC (1:2:4) type B-2 (40mm graded aggregate) for water tank of base in round shape finished using extra cement all as specified and directed.

S&F 2000 Ltrs capacity Rotational moulded, polythene water storage tanks double layered (cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and directed.

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and directed.

S & F GI tubing medium grade 15 mm bore with all fittings, fixed to walls & ceilings or laid in floor etc.

All as per item 59 above, but 20 mm bore GI pipe.

S&F of 20 mm bore Gun-metal gate valves with iron wheel head, screwed both ends for iron pipe and fixed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fix vitreous china wash down water closet pan (Pedestal type), white including removing the existing one complete and making good all connections as in repairs all as specified and directed.

S&F 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed

S&F Stop valves, 15 mm bore of pipe, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed

Supply and fix 15 mm bore bib tap brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe fixed Complete all as directed

Supply and fix 12mm thick double glass, toughened coloured / tinted glass complete sound proof and as per manufacturers instructions for ATC tower, size of glass shall be 2.1m x 0.9m fixed on existing frame work including rubber beadings, all as specified and as directed by Engineer-in-Charge.

S&F Anodised aluminium frame for doors, windows(any type), ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

M&L for Aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including Powder Coating (minimum thickness of powder coating 50 micron), complete all as specified and directed.

S&F 5.5mm thick plain sheet glass glazing any size fixed to steel / wooden frames, complete all as specified and directed.

M&L for prelaminated particle board 12mm thick interior grade prelaminated one side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fix 150 mm size extruded aluminium door handles fabricated type, complete all as specified and directed.

Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed, complete all as specified and directed.

S&F in repairs aluminium dia cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

M&L for joist, channel, angle or tee sections, fixed independentlly, without connecting plates, etc complete all as specified and directed (Fe 410-W Gde-E-250 quality A), complete all as specified and directed.

S&F Ball castor wheel metal with appropriate fasteners including fitting with existing structure as required complete all as specified.

M&L 100 mm thick cement concrete 1 : 2 : 4 type B-2 (using 20mm graded crushed stone aggregate) laid in base, cement concrete surface even and smooth w/o using extra cement.

M&L for preparation of surface of brick, concrete, cement, asbestos or plaster surface and applying two coats of plastic emulsion paint approved colour complete all as specified.

Cutting openings through walls for door, window and other openings or enlarging existing openings, etc or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises

S&F for framed work such as grills, gratings, flats, angle iron etc with ends of bars shouldered and rivited or forged into spikes framed guard bar barred iron doors, window grills and similar work conforming to Fe 410-0 or Fe 310-0 complete all as directed by Engineer-in-Charge.

S&F Mild steel in flat, round or square bars, in available lengths incuding necessary cutting welding to make grills complete all as specified.

M&L for Cutting holes in Stone masonry walls/brick masonry walls built in cement mortar for inserting hold fasts, depth of embedded portion of hold fast exceeding 10 cm and not exceeding 20 cm including provision of PCC 1:2:4 Type B1 for bed blocks / filling and making good in cement mortar 1:3 rendering / glazed wall tiles including finishing to wall and wall painting complete to match with the adjoining / existing surface complete all as specified and directed.

M&L for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick Second class hard wood(Haldu) plain, framed, panelled shutters (any number of panels), with panels of veneered particle board or plywood or bison board, complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Excavation in post holes each not exceeding 0.50 cum getting out, returning filling in layers not exceeding 25cm etc removal at surplus soil to a distance not exceeding 50 m and making good surface in hard/ dense soil, complete all as specified and directed.

M&L glass dividing strips 3mm thick & 38mm width inserted in position and confirming to design complete all as specified and directed.

K LAKSHMAN SINGH AND CO

Mavee Syndicate

M/S P.SWAROOP KUMAR