SR TO RB JUDGE HOUSE UNDER MTC. BOOTH SECTOR 16 CHANDIGARH (WOOD WORK AND OTHER MISCELLANEOUS WORKS)

Providing and fixing 2'-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet 0.8mm mica inside canbinet . The rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of Engineer-in-charge.

Providing and fixing book rack made out of with side, top and bottom frame 1'-0" deep and inner shelf 9" deep made out with 19mm thick commercial board, 6mm thick ply on the back side, teak ply on the exposed board surface including front side of 6mm ply, teak wood lipping on board edges, French polish on the teak ply and lipping and synthetic enamel paint on the back side of 6mm ply complete in position as per entire satisfaction of Engineer-in-charge.

Providing and fixing modular kitchen with cabinet made out of 18 mm thick HDHMR board machine made. The HDHMR board of 8 feet by 4 feet should weight noT less than 46kg. The edges of cabinet is to be fixed with PVC edge bend of 0.8mm thick with adhesive (hot melt). The complete box shall be assembled with mini fix Handleless Profiles of should be machine fitted (Built -in) into the cabinets. It further includes the cost of 4 nos legs 4” high with load capacity of 200kg per leg). The cost also includes PVC skirting 12mm thick in front of cabinet bottom. This cost also includes the front shutter made out of 18mm thick High Gloss laminate HDHMR exterior grade board . The shutter should have 4 side PVC edge bend 2mm thick fixed with adhesive (hot melt). All these should be complete as per drawings supplied by the consultant and need to be verified by the consultant and the Engineer- in charge.

Providing and fixing wooden cabinet of 13½” deep and 2’-0" height with open able shutter at wall above 4’-9" height consisting of 19mm thick with commercial board (ISI marked) lipped with teak wood lipping of 19mm x 6mm on exposed edges include cost of nail, screws, auto hinges, synthetic adhesive etc. The front shutter and sides are to be furnished with 1mm thick ISI marked superior quality mica of approved shade and inner side of the cabinet with 0.8mm thick mica of approved shade fixed in position with help of wooden gutties at wall complete in al respect to the entire satisfaction of Engineer in charge.

Providing and fixing of kitchen cabinet below working shelves made out with 19mm thick commercial ISI marked plyboard and front portion of the cabinet furnished with 1mm thick superior quality sun mica of outer side and 0.8mm thick sun mica inner side of the cabinet for fixing the kitchen accessories and jack at bottom synthetic enamel paint over remaining portion. It is also include the cost of sprit polishing on the edge of the lipping cost of stainless steel handle, adhesive, nail, screws etc. complete fixed in position to the entire satisfaction of Engineer-in-Charge.

Providing and fixing heavy duty S.S. kitchen hydraulic auto hinges accessories fixing in the existing cabinet with help of best quality telescopic channel as approved complete in all respects and to the entire satisfaction of Engineer-in-charge.

Providing and fixing heavy duty telescopic channel for drawers 18" to be fixed with necessary screws complete in all respects and to the entire satisfaction of Engineer-in-charge.

Providing and fixing bottle pull out 200 mm, soft close, 2 shelf stain finish to be fixed in the existing cabinet with superior quality as approved complete in all respects and to the entire satisfaction of Engineer-in-charge.

Providing and fixing 6'-0" golden champ wood jaffery on compound wall with frame of hard wood section 2” x 1.3/8” as horizontal member and vertical members fixed with hard wood and strips 4”x 3/8” @ 6” c/c on both faces sides faces of jaffery. The top of jaffery is to be covered with another strip of 2 x 1.3/8”. The complete panel is to fixed over existing wall and M.S. angle with iron nuts and bolts etc. The complete jaffery is to be painted with special quality over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing main entry gate 5'-11" high (paint finish) consisting of shesham wood battens of size 5'-11" x 6" x 3/4" vertically, including making grooves for interlocking, with the help of M.S. nuts and bolts including paintng two coats of synthetic enamel paint over one coat of wooden primer, on the existing M.S. frame completely fixed in position in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing 8mm thick wooden laminated floor class of use 31/23 having wear resistance level of AC-3 as per EN-13329 with a direct pressure laminate surface including profile, treated with aluminium side, flooring of approved colour and shade complete in all respects and to the entire satisfaction of the Engineer in charge.

Providing and fixing stair case railing of size 4" x 4" of teak wood complete fixed in the existing M.S. railing including making the groove in railing at bottom, top sides rounded with smooth finish completely fixed in position in all respect to the entire satisfaction of Engineer-in-charge.

P/F 110mm internal dia PVC pipe as rain water pipe on walls of 6 kg. pressure with Bend, Elbow and Clamps complete in all respect to the entire satisfaction of Engineer--in-Charge.

Please Enable Macros to View BoQ information