82941/E9

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XI are under Ser No. 2.00 to 11.00 are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the tenderer for SITE CLEARANCE as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for ROADS / FOOT PATH / CULVERTS as listed in Schedule ‘A’ Part- V

Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY / TREATED WATER SUPPLY as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part- IX

Lumpsum price worked out by the tenderer for SECURITY WALL & GATE as listed in Schedule ‘A’ Part- X

Lumpsum price worked out by the tenderer for RAIN WATER HARVESTING as listed in Schedule ‘A’ Part- XI

SCHEDULE `A' PART - I , XII TO XV are not prepriced by MES and prepriced rates indicating 0.0 under column 5 signifies this fact only. Bidders shall insert their rates in Green field under Col-6.

SCHEDULE 'A' PART I -BUILDINGS/ STRUCTURES

Construction of pump room with duty staff room in single storey construction with permanent specification complete with RCC -30 design mix including excavation in any types of strata, foundation concrete, footings, plinth beam, Col, lintel, roof beam, roof slab, Solid Block walling, internal & External plastering, finishing, Roof Treatment . Anti termite treatment, steel door, Pressed steel door frame, flush shutter, glazed skelton door shutter, fly proof Box type steel window, PVC door, Wall & floor tiles, sanitary fittings in toilets, plinth protection, including all soil waste pipe up to first manhole complete incl refilling of earth and disposal of surplus earth within 500 m lead etc complete all as specified and shown on drawings.

Constructing RCC sumpwell in M-30 mix of required capacity including excavation in any types of strata, foundation concrete, container walls, bottom slab, top RCC roof slab with CI manhole covers and with plaster and water proofing as per zonal specification including epoxy paint inside, refilling of earth and disposal of surplus earth within 50 m lead, including all piping connections, valves, MS ladder, ventilation shaft, BB chambers with 5m of outer wall of tank, etc.,complete including test for water tightness and hydraulic functioning Sump Well of 7 x 7 x 3 mtrs all as shown on drawing and as specified

Construction of following RCC tank including excavation in any types of strata, foundation concrete, container walls, bottom slab, top RCC roof slab with CI manhole covers and with plaster and water proofing as per zonal specification including epoxy paint inside, refilling of earth and disposal of surplus earth within 50 m lead, including provn for all piping connections all as shown on drawings. (i) BAR SCREEN CHAMBER, GRIT REMOVAL AND EQUALIZATION TANK (ii) ANOXIC TANK, AERATION ZONE AND LAMELLA ZONE (iii) SLUDGE HOLDING TANK (iv) FILTER FEED TANK (v) TREATED WATER TANK

SCHEDULE 'A' PART XII -STANDBY DG SET

Supply, install, test and commission of 100 KVA (The capacity of Generator set shall be net after all due derating factors as per relevant lSI standard), silent Diesel engine Generating Set, 415 volts, 3 phase, 0.8 Power factor, 50 Hz, 4 wire system as per IS 10001/10002 comprising of Koel 100 KVA or equivalent, developing suitably derated of Minimum BHP @ 1500 RPM, Liquid Cooled, electric start coupled to alternator as per IS 13364 mounted on a common base frame with standard control panel for automatic starting on main control panel having meters, sound proof canopy, integral fuel tank with battery and leads and accessories complete in all respect with emission control device to control the PM within range as prescribed by NGT/ norms of CPCB and CPCB approved acoustic enclosure suitable for ambient condition at Secunderabad including required PCC foundation as per manufacturers specification and confrrming to conditions under IS 10004722/1460 BS 5514/2613/ 5000 ISO 8526/3046 with following provisions:-

(A) Alternator :- Standard design alternator rated at 100 KV A net output at site after considering derating as per site conditions at 0.8 (lag) power factor AC, 3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self exicited self regulated screen protected drip proof IP 23 enclosure brushless design with widing in pole faces, insulating class 'H' and voltage regulation of ± 1 % at rated voltage from no load to full load. The alternator shall be confirming to BS 2613/5000 and shall be inposition to generate supply with frequency regulation with in ± 1% tolerance. The alternator will be suitable for tropical climate and shall generally confirm to BS - 2613/50001 IS - 4722 and as per the following provisions:- (a) Insualation class - 'H' (b) Temparature rise Class - 'H' (c) Excitation: Self Excited (d) Regulation performance: The voltage is kept constant with ± 1 %, manual voltage adjustment within ± 5% (e) Frequency regulation ± 1 % (f) UG cable of suitable size from Alternator to AMP is deemed to be include in quoted rate. (g) Antivibration Pads

(B)Diesel Engine: - Adquate capacity Diesel engine suitably derated of Matching BHP for 100 KVA coupled drive independently above alternator and after considering derating as per site conditons after generating and reducing power consumed by accessories, directly coupled through flexible coupling, multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISI/BS - 5514 with an overload capacity of 10% for one hour in 12 hours continuous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under:- (a) Fly wheel with housing (b) Cooling system :- Mounted radiator with fan & belts. (c) Cooling pump: - Centrifugal type belt driven. (d) Exhaust System :- Exhaust System complete with exhaust piping of suitable dia as per manufacture standard with MS pipe light grade upto and away two meters height from top of enclosure incluing necessary angle iron frame supports from floor to the bottom of exhaust pipe from the enclosure covered with mineral wool of thickness 50mm rapped with chicken wire mesh of size 2.25mm and aluminium sheet of 24 SWG to be complete with in the enclosure for safe exhaust without transforming vibration to the wall of the enclosure. Exhaust gas turbo charger type Exhaust manifold Silencer: Residential type Bellows

(C) Fuel System :- Fuel injection system with fuel injectors, fuel injection solenoid switch/nozzles/ governer electronic type capable for 1 % speed /frequency regulation. (i) Fuel filters (ii) Fuel hoses (iii) Lub oil System :- (iv)Lubricating oil filter (v) Lubricating oil pump (vi) Air Intake System :- (a) Air intake Manifold (b) Air cleanler dry type (D) Governer :- Electronic Governer (a) Starting System :- Electric Self starter with maintenace free batteries including battery charging alternator. (b) Batteries:- Required capacity and size Battery complete with copper conductor multistrnded leads of suitable length from self starter to the battery terminals complete with initial charge and initial fill of electrolite all as specified. (i) Starter gear ring (ii) Start and stop push button (iii) Ignition key / Switch (iv) Handling and operation: Salient features of accessories shall be as under: (a) Radiator with blower fan (b) Corrosion inhibitor coolant (c) Paper element filters for fuel, lub oil and by pass. (d) Eelctronic governer controlled direct fuel injection system & (e) Fly wheel housing and fly wheel.

(E) Generator Monitoring Panel: Comprising of following:- (a) Microprocessor based integrator generator set monitories, metering, protection and control system with built torque matched volts/H3 over load control. (b) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown) (c) Alternator protection parameters like under voltage, over current, under frequency, over frequency ( alarm & shut down) (d) Relay drivers for remote annuciations (e) Cyclic cranking (f) Auto/manual start stop (g) Alternator trim adjustment from the front key pad (h) Operates within a temperature range 0- 50°C and humidity upto 95% (j) Remote monitoring capabilty through separate interface modules (k) Genset metering parameters like lube oil pressure, coolant temperature, engine speed(rpm), run hours, DC voltage, 3 phase volts and 3 phase amperes, frequency, KW, KVA, power factor (l) Safety Controls : - Engine low lube oil pressure, high water temparature and over speeding of engine. (m) Coupling arrngement : - Flexible coupling, fly wheel to suit flexiable coupling fly wheel housing. (n) Accessories :-A VM Pads built or separtely mounted to manufacturer base frames. (o) Base Frame: - Made out of ISMC 200 of sturdy design made of MS channel with necessary reinforcement and predetermined holes.

(p) Fuel Tank :- Daily service fuel tank of capacity suitable for 12 Hours consumption on full load (Inbuilt) made out of 3mm thick (Heat Retradant) sheet top and bottom with caliberated level indicating arrangement, stop cock, drain plug, fuel pump of suitable capacity and connected pipe line should be installed with in bulit inside the accoustic enclosure is inclusive of the cost of DG Set and is as per manufacturer design (q) Deliverables:- Confirms the norms established by CPCB. (F) AMF PANEL:- (a) Auto Main Failure (AMF) panel made out of minimum 2 mm thick CRCA sheet, powder coated of conforming to IS 8623 totally enclosed dust and vermin proof with front and rear openings of 415 Volts, 3 Phase,4 Wire, AC 50 Hz having aluminium bus bar capacity required to carry current at 100% load of DG set with three phase and half neutral colour coded, prewired with copper flexible cable, be all as specified with the following accessories, control cable from Gen set to AMF panel:- (i) 4 pole contactor of suitable capacty - 2 Nos. (ii) MCCB, 4 Pole as per OEM design -2 Nos (One for Alternator and one for Commercial Supply) with suitable fuse links.(iv) CTs suitable rating for both the supplies.(v) DC Ammeter. (vi) DC Voltmeter. (vii) Push buttons. (viii) Indication Lamps. (ix) 2 over load+ earth leakage relay. (x) Multi functional digital meter for KWH,KVA,KW,Amps,volts, frequency, power factor etc. (xi) SMPS Battery charger 12V, with trickle & Boost charging (xii) On/ Off switch. (xiii) Automatic/manual switch. (xiv) Hooter. (xv) Voltage sensing relay. (xvi) Six window anunciator for fault indications. (xvii) Electro magnetic relays. (xviii) Metering required in DG set :- A, V, Hz, KVA, KW, PF & KWH & Metering required in mains :- A, V, Hz.

(G) Acoustic enclosure: CPCB approved enclosure is free standing floor mounted factory built and modular in construction to facilitate easy assembly at work site and will be drop over housing type. It will consist of acoustically treated panel housed in sheet steel will provide easy access for maintenance, repairs and operation. The enclosure is custom built to suit conditions, with the following features:-(a) Custom built product for various equipments, with ensure the optimum performance without duration. (b) Rugged in construction maintenance free and modular designs which facilitate easy at site. (c) 16 SWG (1.6 mm) thick CRCA sheets to be used for enclosure panel to ensure longer life against weathering action. High quality acoustic insulation materials to be used as per IS 8183 for maximum sound absorption. Acoustic layers are supported by perforated sheets. (d) Sheet metal mponents of the enclosure should undergo various stages of surfacetreatment prior to painting which leads to be better life of the enclosure against weathering action. (e) Special paint treatment with pure polyester powder/epoxy to be provided for better weather resistance. (f) Well designed ventilation system to be provided to pump up the heat in the chamber efficiently. (g) For effective acoustic / weather sealing a special type weather sealing gaskets, new frame rubber gaskets to be used. (h) Working space is to be provided around tbe equipment for easy maintenance / repairs. (j) Necessary cut out provision for entry and exist of fuel lines cable to be incorporated in the enclosure as per the requirement. (k) A see through transparent window (glass or acrylic) in front of engine panel to be provided for monitoring the operation. (l) Ducting if required, bellows, mechanical hardware like locks, hinges fasteners etc to be provided. (m) Deliverables. 75 dBA @ imtr at 75% load under free field conditions. The temp inside tee enclosure will be within as per manufacturers recommendations above ambient temp. (n) The enclosure should be provided witb bulk head light fitting for inside illumination (o) The battaries should be placed inside the enclosure beside the DG Set on a suitable inlsulated platform. (p) The DG Set should be provided with external Emergency stop push button. (q) The accoustic enclosure parts shall be of powder coated after pre treatment process. (r) The powder coating shade should be Genset Green. The base frame should be painted with epoxy based black shade. Make for AMF PANEL: DG SET OEM Make for ACCOUSTIC PANEL: DG SET OEM (H) Civil Works :- All civil works with PCC plat form and related to foundations including of panel and equipments and making good the existing structrure of distrubed during installtion and commissioning of Genset. The depth of the foundation shall be minimum 300 mm with antivibration pads or as recommended by the manufacturer.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground earth pit not less than 2.25 m deep below normal ground level with the top edge of earth plate at a depth of not less than 1.5 m below normal ground level connected to GI earth strip 32x6 mm dia by means of bolts, nuts, check nuts and washers made out of GI and GI earth strip protected by 40 mm bore light grade GI pipe,watering arrangement by provision of 20mm dia GI pipe medium grade with cast iron funnel,provision of test point and connected to main control board all as shown in electrical plate No 3 of SSR Part I including necessary earth work and excavation in any type of soil and PCC 1 : 2 : 4 type B - 1 in chamber and 40 mm thick RCC 1 : 2 : 4 type B - 1 cover slab with 6 mm dia mild steel bars at 100 mm centre to centre both ways with 6 mm dia M S hooks complete all as specified and as directed.

SCHEDULE 'A' PART XIII -SEWAGE TREATMENT PLANTS

Supply and fix overflow type oil skimmer with flow of 0-50 LPH with belt size 150 mm belt thick ness 2.0 mm and motor rating 0.5 Hp with mechanical operated including necessary electrical connections as required complete all as specified and directed

Supply, installation, testing & commissioning of 1 No SS-304 Perforated, Screens with suitable lifting arrangement having size of 1000 mm (HT) x 500 mm (W) x 3.5 mm (T) & having 10 mm Openings to be fitted within Bar Screen Chamber, complete all as specified & directed

Supply, installation, testing and commissioning (SITC) of submersible, non-clogging, Equalized waste Water transfer pump having having 22.5 m3 / hr at 10 MWC head, continuous duty rating, cast iron casing, stainless steel impeller and stainless steel shaft complete directly coupled with induction motor 415 V, 3- Phase, 50 Hz of suitable capacity with 2900 RPM, IP 68 protection, class F insulation including installation, foundation as per OEM specification, electrical connection, with suitable rating of copper cables, starter panel with complete protection device such as over load current protection, phase reversal, single phasing, no voltage / over voltage protection, complete accessories such as SS lifting chain of suitable length and hook arrangements all complete as specified in Particulars Specification and directed

Supply, installation, testing and commissioning of Air Rotameter for measuring of air flow and acrylic body consutrction with 40 bar pressure with industrial using for dia 125 mm compressed air header line all complete as specified and directed

Supply, installation, testing and commissioning (SITC) of twin lobe rotary air blowers capable of delivering 700 m3 / hr of atmospheric air at 0.6 kg/cm2 pressure, driven through "V" belt or directly coupled through flexible coupling to a TEFC motor suitable for 415±10% V, 3- Ph, 50 Hz AC supply complete with foundation as per OEM recommendation all as specified and directed. Standard Accessories Required a. Common Motor &Blower Base Frame with Motor Base Plate and Belt Tightening Arrangement. b. Suction Silencer with Suitable Flanges. c. Suction Air Filter. d. Pressure Gauge. e. Pressure Relief Value (Spring Loaded Type). f. Blower& Motor Pulley with Belt Guard. g. Interconnecting Line with Flanges. h. Filter Hood. i. First Oil Fill. j. V-Belt. k. NRV (Non Return Valve) l. Operation & Maintenance Manual.

Supply, installation, testing and commissioning (SITC) of Sodium Hypochlorite dosing system consisting of one HDPE tank of 25 litres capacity with initial fill of HOCl solution 10% concenteration, positive displacement diphragm dosing pump having variable flowrate of 0-6 LPH along with motor suitable for operation at 230 V, 1- Ph, 50 Hz. supply and complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings . The pump shall have speed & stroke control complete all as specified and directed

Material and labour for Hypo dosing piping of 25 mm NB SS 304 including necessary fittings viz. flexible connections, bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators, etc. including painting and supporting / fixing the pipe in excavated trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fasteners) with necessary accessorie, duly insulated complete all as specified and directed

Supply, installation, testing and commissioning (SITC) of Non clogging type Centrifugal Sludge Recirculation Pumps capable of 0.68 m3 / hr discharge at 12 MWC head and having solid handling capacity of upto 105 mm size particles having CI casing & impeller complete with all accessories, motor of required capacity, delivery header with isolation valve, pressure gauge with isolation cock, level controller (with wiring) to control, etc. complete foundation as per OEM recommendation all as specified and directed

Supply and spread a Floating meadia for MBBR reactor in PP construction wagon wheel design having density less than water and the Vergin Media 100 Kgs/M3 & surface area of media, minimum 400 m2 / m3 complete all as specified and directed

Supply, installation, testing and commissioning (SITC) of Centrifugal filter feed water pump capable of 22.5 m3 / hr discharge at 20 MWC head having solid handling capacity of upto 105 mm size particles CI casing & impeller complete with all accessories, motor suitable for 415±10% V, 3- Ph, 50 Hz AC supply, pressure gauge with isolation cock, isolation valve, NRV on delivery line, strainer at suction. mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve, etc. complete all as specified and directed

Supply, installation, testing and commissioning (SITC) of MSEP vessel for mechanically operated pressure sand filter of ø 1500 mm & 1800 mm HOS (shell & design thickness 4.0 mm minimum) suitable for test pressure of 5.0 kg / cm² , filteration rate -15 cum/hr and working pressure of 3.5 kg / cm², including media (pebbles, sand, silex, fine sand, fine silex), standard fittings viz. pressure gauge, sampling cock, backwash including frontal piping & valves, etc. complete including suitable fdn as per OEM recommendations all as specified and directed

Supply, installation, testing and commissioning (SITC) of MSEP vessel for mechanically operated activated carbon filter of ø 1500 mm & 2000 mm HOS (shell & design thickness 4.0 mm minimum) suitable for test pressure of 5.0 kg/cm², filteration rate -15 cum/hr and working pressure of 3.5 kg / cm², including media (activated carbon with supporting media), standard fittings viz. pressure gauge, sampling cock, backwash including frontal piping & valves, etc. complete including suitable fdn as per OEM recommendations all as specified and directed

Supply, installation, testing and commissioning (SITC) of Non clogging type centrifugal Sludge Transfer pump capable of 0.40 m3 / hr discharge at 6.5 kg/cm2 head having CI casing & impeller complete with all accessories, motor of required capacity, delivery header with isolation valve, pressure gauge with isolation cock, level controller (with wiring) to control, etc. complete all as specified and directed

Supply , Install ,test and commissioning of filter press machine suitable to handle sludge generated from 450 KLD STP as per the following specification complete with inlet and drain connection upto collection sump necessary foundation for mounting as per OEM recommendation all as specified and directed. (i) Tye -PP recessed plate (10+2 plates) (ii) MOC -MSEP (iii) Max Operating Pressure -5 Kg/cm2 (iv) Fluid handled - Sludge from 450 KLD STP (v) Nature of solids -Biological

Supply and fix stainless steel 304 pipes conforming to SCH 40 for air grid for 125 mm NB complete all as specified and directed .

Supply and fix stainless steel 304 pipes conforming to SCH 40 for air grid for 100 mm NB complete all as specified and directed .

Supply and fix stainless steel 304 pipes conforming to SCH 40 for air grid for 80 mm NB complete all as specified and directed .

Supply and fix stainless steel 304 pipes conforming to SCH 40 for air grid for 65 mm NB complete all as specified and directed .

Supply and fix stainless steel 304 pipes conforming to SCH 40 for air grid for 40 mm NB complete all as specified and directed . Notes for item Nos.14.18 to 14.22: [i] Air piping comprising of pipes droppers / laterals with MS (epoxy coated) header complete with all fittings viz. tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc are deemed to be included in the quoted rates. [ii] Air dispersion system for equilization tank & anoxic / MBBR tank with fine & coarse bubblers

Supply, installation, testing and commissioning of wafer type PN 1.6 rated short pattern CI Auto Desludge valve of 50 mm NB having compressed fluid air 0.15 to 1.0 MPa body test pressure & 1.6 MPa seat test pressure and standard flange end conforming to BS 10 Table D/E & ANSI B 16.1 CI- 125, duly insulated complete with necessary electric cabling & connection from the panel all as specified and directed

Supply, installation, testing and commissioning of wafer type PN 1.6 rated short pattern CI butterfly valve having Gr. FG-200 CI body conforming to IS 210: 2009, seat having EPDM rubber lining, CF 8 stainless steel disc, AISI- 410 stainless steel stem, 2.4 MPa body test pressure & 1.6 MPa seat test pressure and standard flange end conforming to BS 10 Table D/E & ANSI B 16.1 CI- 125, duly insulated all as specified and directed for the following sizes:-

Supply and fixing of 4" bourdon tube pressure gauge conforming to EN 837-1, having copper alloy process connection & pressure element, plastic black pointer & case, plastic crystal-clear window, snap-fitted in case, accuracy class 2.5, scale range 0- 25 bar complete with accessories, etc. as specified and directed

Supply, installation, testing and commissioning of wafer type PN 1.6 rated swing check type multidoor reflux valve (NRV), designed & tested as per IS 5312 (Part- 2): 1986, suitable to handle clear water having turbidity up to 5000 PPM, having CI body, door and diaphragm, leaded tin bronze seat rings and flange drilling standard end connection, etc., duly insulated complete all as specified and directed for the following Sizes:-

Supply, installation, testing and commissioning of 25 mm NB PN 1.6 rated two piece design vertical/horizontal lift non return valve (NRV), having Bronze body, Conforming to Bronze IBR 282(a)(iv) Gr.B, renewable seat & disc, screw female BSP taper threads end connection, etc., complete all as specified and directed

Material and Labour for sewage water piping / Sludge recirculation piping/ sludge transfer piping / Lifting man hole piping of MOC SS 304 including necessary fittings viz. flexible connections, bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators, etc. including painting and supporting / fixing the pipe in excavated trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fasteners) with necessary accessorie, duly insulated like gaskets , nuts, bolts etc., complete all as specified and directed for the following Sizes:-

Supply and fix Agitators with Flange type gear box ,voltage rating 415 V with speed of 1400 RPM with mounting flange type with motor rating 1 HP & thickness of base plate 5-6 mm and size of base 400 X 200 mm Complete as per OEM's recommendation all as specified and directed ,

Supply and install disc type 5" coarse diffuser with12 nos of opening per each diffuser having size of 6 mm dia, nominal air flow rate 20 m3 / hr all as specified and directed ,

Supply, installation, testing and commissioning of 25 mm NB wafer type PN 1.6 rated short pattern CI ball valve having Gr. FG-200 CI body conforming to IS 210: 2009, seat having EPDM rubber lining, CF 8 stainless steel disc, AISI- 410 stainless steel stem, 2.4 MPa body test pressure & 1.6 MPa seat test pressure and standard flange end conforming to BS 10 Table D/E & ANSI B 16.1 CI- 125, duly insulated complete all as specified and directed

Supply, installation, testing and commissioning (SITC) of submersible, non-clogging, Lifting manhole pump having having following capacity, continuous duty rating, cast iron casing, stainless steel impeller and stainless steel shaft complete directly coupled with induction motor 415 V, 3- Phase, 50 Hz of suitable capacity with 2900 RPM, IP 68 protection, class F insulation including installation, foundation as per OEM specification, electrical connection, with suitable rating of copper cables, starter panel with complete protection device such as over load current protection, phase reversal, single phasing, no voltage / over voltage protection, complete accessories such as lifting chain of SS 304 of suitable length with hook arrangements all complete as specified in particulars specification and directed

15.40 m3/hr @ 10mWC, (1W +1S), (for LMH #30) Peak Flow

3.86 m3/hr @ 10mWC, (1W +1S), (for LMH #30) Avg Flow

12.42 m3/hr @ 10mWC, (1W +1S), (for LMH #58) Peak Flow

3.14 m3/hr @ 10mWC, (1W +1S), (for LMH #58) Avg Flow

14.92 m3/hr @ 10mWC, (1W +1S), (for LMH #62) Peak Flow

3.76 m3/hr @ 10mWC, (1W +1S), (for LMH #62) Avg Flow

Supply, installation, testing and commissioning (SITC) of Submersible Non clogging type Centrifugal Pumps having solid handling capacity of upto 105 mm size particles having CI casing & impeller complete with all accessories, motor of required capacity, delivery header with isolation valve, pressure gauge with isolation cock, level controller (with wiring) to control, etc. complete all as specified and directed. (for Sump to Inlet Chamber). NOTE for 14.59 to 14.61 :- [i] Necessary civil work viz. foundation for placement of pump and pump accessories shall be covered in the scope of work. [ii] Pressure gauges, thermometers and drains shall be measured and paid for saperately. [iii] The quoted shall be inclusive of testing and commissioning of pump

79.83 m3/hr discharge at 08 MWC (1W +1S), Peak Flow

49.88 m3/hr discharge at 08 MWC (1W +1S), Normal Flow

19.98 m3/hr discharge at 08 MWC (1W +1S), Avg Flow

Supply, installation, commissioning and testing of ELECTRICAL Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2.0 mm thick mild steel WIth IP 51 Protection CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labeling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enameled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. complete all as specified.

For Air Blower 50 A, 10 KA, (Model No. 30TSDA MS23AI21 or equivelent),(Star-delta starter) - Each -02 Nos Equilization Waste Water Pump 10 A, 10 KA (Model No. 5TDL MS13AC12 or equivelent),(DOL Starter) Each -02 Nos Sludge Re-circulation Pump, 10 A, 10 KA (Model No. 5TDL MS13AC12 or equivelent),(DOL Starter) Each -02 Nos Filter Feed Pump, 10 A, 10 KA (Model No. 5TDL MS13AC14 or equivelent),(DOL Starter) Each -02 Nos Sludge Transfer Pump, 10 A, 10 KA (Model No. 5TDL MS13AC12 or equivelent),(DOL Starter) Each -02 Nos For treated Water Pump, 40 A, 10 KA (Model No. 5TDL MS13AC14 or equivelent),(DOL Starter) Each -02 Nos For Sump to Inlet chamber Pump, 40 A, 10 KA (Model No.5TDL MS13AC14 or equivelent),(DOL Starter),(Peak Flow) Each -02 Nos For Sump to Inlet chamber Pump, 40 A, 10 KA (Model No.5TDL MS13AC14 or equivelent),(DOL Starter),(Normal Flow) Each -02 Nos For Sump to Inlet chamber Pump, 40 A, 10 KA (Model No.5TDL MS13AC10 or equivelent),(DOL Starter),(Avg Flow) Each -02 Nos NOTE: Contractor shall submit the technical specifications, constructional drawings, makes of all panel board components, etc. for approval of representative of Garrison Engineer.

Supply & Install, fix biotic water model type PP-TSM -99 with manual grade on 11 M2/M3 secondary treatment stage and complete civil work with installation in Black color Height of media of 1000 mm Moc of media pvc with thickness 1.0 mm with fitting cross sectinal area 120 mm X 44mm as per recommendation of OEM all as specified and as directed. Make: Mantech , boitic water solution ,pp aqua tech

Supply & Install, & testing of sensing range Ultrasonic water level sensor requirers 10-30 VDC Voltge, 40 mA Current, having Average timing 15s, -40°F to +158°F temperature range complete all as specified and directed. Make: Xylem, WIKA, HCCK

SCHEDULE 'A' PART XIV - MISCELLANEOUS ITEMS

Supply, installation, testing and commissioning (SITC) of Treated water open well submersible pump capable of 15 m3 / hr discharge at 25 MWC head having solid handling capacity of minimum 5 mm size particles CI casing & impeller complete with all accessories, motor suitable for 415±10% V, 3- Ph, 50 Hz AC supply, pressure gauge with isolation cock, isolation valve, NRV on delivery line, strainer at suction. mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve, etc. complete with fdn as required all as specified and directed .

Supply and fixing of Submersible cable, PVC insulated and sheathed flat 3 core,4 Sq mm, 1100 Volts grade with multi stranded copper conductors from starter to submersible pump set complete all as specified and as directed

Material and Labour for construction of valve chamber having dimension 450 x 450 x 450 mm suitable for upto 63 mm PP-R Gare valve with PCC 1:4:8 type D2 for foundation, brick work wall in cement mortar (1:4) , PCC 1:2:4 type B1 for copping, rendering plaster in CM 1:4 , 15mm thick including provision of MS Steel top cover 3mm thick with brazing of MS flat of size 25x4mm at edges and in diagonal and angle iron base frame of 40x40x5mm, painting with twocoat of synthetic enamel paint over a coat of red oxide primer and locking arrangement including necessary excavation earth work , removal of surplus soil etc.,complete all as specified.

Supply and fix pole mounted Sheet Moulded Compound(SMC) Box weather proof type with hinged type door off white color of size 140x140x95 mm comprising of 1 No MCB 6A and 1 No neutral link and 4 Nos Aluminium bus bar of suitable size mounted on suitable insulator complete fixed on pole with suitable clamps, bolts and nuts all as specified and as directed.

Supply and Fix 3 core copper conductor PVC insulated cable round of size 1.5 Sqmm FR multistranded 1100 volts grade complete all as specified and as directed.

Supply and fixing Horn Gap type Fuse unit, 11000 volts grade, mounted on polymer insulators and steel frame, single pole, fixed on DP structures complete all as specified and as directed.

Material and Labour for chain link fencing including line wires any mesh / size and type of standard rails staining bolts, fencing posts etc, provision of binding wire,exv for fixing posts ,PCC etc., complete all as specified and directed

Supply ,Fabricate, install, connect, test and commissioning LT panel board, powder coated, outdoor weather proof type, compartmentalised fabricated with 3 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for aluminium busbars, separate compartment for each switch gear, louvers and air vent for natural air flow, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars complete all as specified and comprising of the followings:- (i) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 400 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps-03 Nos for RYB phases on incoming side. (ii) 3 Phase Flush Mounting Meter, Class 1 meter, 96 X 96 mm 3 Ph 4W 240V 5A (Multifunction meter) -1No (iii) INCOMING : MCCB fixed thermal magnetic release type of capacity 200 amps, 4 pole, 36 kA.- 1 Nos. (IV) OUTGOING :- (a) MCCB fixed thermal magnetic release type of capacity 100 amps, 3 pole, 16 kA.- 2 Nos. (b) MCCB fixed thermal magnetic release type of capacity 63 amps, 3 pole, 415 Volts, 50 Hz , 16kA, - 1 Nos (c) Isolator TPN 20 Amps capacity- 03 Nos (d) Three phase contactor with timer for security light of capacity 40 Amps - 01 Nos.

Supply ,Fabricate, install, connect, test and commissioning LT panel board, powder coated, outdoor weather proof type, compartmentalised fabricated with 3 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for aluminium busbars, separate compartment for each switch gear, louvers and air vent for natural air flow, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars complete all as specified and comprising of the followings:- (i) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 100 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps-03 Nos for RYB phases on incoming side. (ii) 3 Phase Flush Mounting Meter, Class 1 meter, 96 X 96 mm 3 Ph 4W 240V 5A (Multifunction meter) -1No (iii) INCOMING : MCB of capacity 40 amps, 4 pole, 16 kA.- 1 No. (IV) OUTGOING :- (a) MCB of capacity 32 amps, 3 pole, 16 kA.- 2 Nos. (b) Provn for fixing DOL / star delta starters for Lift well motors - 02 Nos each

Supply ,Fabricate, install, connect, test and commissioning of Loop-in-Loop out panel board powder coated, outdoor weather proof type, fabricated with 3 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for aluminium busbars of capacity 100A, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including 01 No MCCB 40A, complete mounted on PCC pillars complete all as specified and specified.

Supply and fix 200 mm ID x 225 mm OD DWCPE (Double wall corrugated polyethylene pipe) laid and jointed as per IS 16098 P.2 :2013- SN4 complete all as specified and directed

Supply and fix 300 mm ID x 339 mm OD DWCPE (Double wall corrugated polyethylene pipe) laid and jointed as per IS 16098 P.2 :2013- SN4 complete all as specified and directed.

Supplying and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 7 conforming to IS : 8329 : 100 mm dia Ductile Iron Double Flanged complete all as specified and directed

Supply and laying SFRC Manhole cover complete all as specified and directed

Material and Labour for two pack acrylic polymer modified cementatious water proofing complete all as specified and directed.

Supply , lay test and commissioning of HT cable 11000 volts XLPE with multistranded aluminium conductor armoured conforming to IS of size 3 Core 95 Sqmm complete all as specified and as directed.

Supply, fix, test and commissioning of energy saving and environment friendly long life LED building security light of 25Watts with high efficient led as lighting source, minimum 2500 Lumens with LED driver made up of pressure die cast aluminium housing and with PC cover as diffuser having top opening, separate driver compartment with IP66 protection and impact resistance of IK07 suitable for operation on AC single phase 220-240 Volt, 50 Hz supply all as per Cat No.ENDURAPEARLSL25WLED757SASYTO PCMP of Havells or techno-commercially equivalent of other specified makes fixed with and including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and fixed on wall with 2 Nos MS clamps made out of 25x3mm flat iron painted with two coats of synthetic enamel paints over a coat of red oxide primer including nuts, bolts and washers etc., and making connections through and including flexible conduit from ceiling rose to fitting etc., complete all as specified and as directed.

SCHEDULE 'A' PART XV (MANNING AND OPERATION OF STP DURING DEFECTS LIABILITY PERIOD)

NOTE FOR ITEM NOS 16.03 to 16.07 below:- (a) The quoted rates shall be deemed to include the following operations:- (a) The quoted rates shall be deemed to include the following operations:- (i) Preventive and breakdown maintenance of all the equipments by regular oiling, greasing , changing of gland packing , replacement of nuts and bolts etc during the period of work order. (ii) To take care of house keeping and environmental cleanliness, area up to 5m all around installation shall be kept absolutely neat and clean. (iii) To maintain the installations provided under this contract as per IE rules/Standard Engineering practice. (iv) The cost of spare parts to be replaced for operation/maintenance of sewage treatment plant shall be borne by the contractor being the liability of the contractor during the currency of defect liability period as per conditions of the contract.The cost of Spares to be replaced for operation & maintenance of sewage plant shall also be borne by the contractor during Manning & Operation of STP for 2 years (v) Periodical maintenance shall be carried out by the authorized representative of the original equipment manufacturer (OEM) of the plant. (vi) Electricity and water for operation of the plant will be supplied by the Department free of cost. (vii) operation of raw sewage pump, air blowers, fitter feed pump, dual media filter activate cabon filter (if applicable) , dosing system, ultra filtertion system (if applicable)& control panel. (viii) removing of material arrested at bar screen. (ix ) removing of oil floating at surface. (x) change over from one pump to another daily on requirement (xi) change over from one blower to another daily on requirement. (xii) cleaning of air filter of blower regularly on requirement basis. (xiii) Applying grease to all motors blowers periodically including supplying of suitable quality of grease as per site requirement (xiv) draining of sludge from MBBR reactor once in a month to avoid chocking of air grid (xv) removing of sludge from tube settler depending upon the actual load

(xvi) maintaining of log books for records of operation of plants including cost of stationary (xvii) back wash of dual media filter and activate carbon filter weekly (xviii) screening of inlet & outlet mesh box of MBBR reactor weekly (xix) washing of tube media with low pressure jut of raw water required (xx) draining of burnout lubricant oil and refilling of appropriate lubricant oil in air blower after 200-250 hrs of operation including cost of lubricant (xxi) maintenacne and operation of filter press and collecting output neatly (xxii) operation of standby DG set st and when required (xxiii) operating clear water pumps regularly and in consultation with Engr-in-charge

Manning and operation, Routine maintenance of Sewage Treatment Plants along with DG Sets and including all E/M inventory pertains to 450 KLD STP to be supplied, installed and commissioned in the contract to be carried out round the clock including all Sundays and public holidays by employing the man power and shift timings as mentioned below for operation of plant daily including supply of water treatment chemicals (i.e. Bio septic clean powder, sodium Hypochloride, Dap enzime, Calcium Hypo Chloride and Bleaching powder etc.,), Activated carbon Filter media (ACF). Activated Sand filter media (ASF), MBBR fluidized bio-media, Bacteria culture and other consumables required for smooth running of STP Plant and provision of reliever for weekly off and carrying out daily, weekly, monthly, quarterly & half yearly maintenance etc., complete for the First year during defects liability period after completion of handing over of plant to MES all as specified and as directed.

(a) Man power to be employed per day:- (i) FGM(SK) Operator - 03 Persons One FGM(Operator) per shift of 8 hours each for 3 shifts (b) Shift Timings for FGM(SK) Operator:- (i) First Shift - 0600 hours to 1400 hours (ii) Second Shift - 1400 hours to 2200 hours (iii) Third Shift - 2200 hours to 0600 hours

Manning and operation, Routine maintenance of Sewage Treatment Plants along with DG Sets and including all E/M inventory pertains to 450 KLD STP to be supplied, installed and commissioned in the contract to be carried out round the clock including all Sundays and public holidays by employing the man power and shift timings as mentioned below for operation of plant daily including supply of water treatment chemicals (i.e. Bio septic clean powder, sodium Hypochloride, Dap enzime, Calcium Hypo Chloride and Bleaching powder etc.,), Activated carbon Filter media (ACF). Activated Sand filter media (ASF), MBBR fluidized bio-media, Bacteria culture and other consumables required for smooth running of STP Plant and provision of reliever for weekly off and carrying out daily, weekly, monthly, quarterly & half yearly maintenance etc., complete for the remaining period of First year and second year during defects liability period after completion of 11 months of handing over of plant to MES all as specified and as directed.

(a) Man power to be employed per day:- (i) FGM(SK) Operator - 03 Persons One FGM(Operator) per shift of 8 hours each for 3 shifts (b) Shift Timings for FGM(SK) Operator:- (i) First Shift - 0600 hours to 1400 hours (ii) Second Shift - 1400 hours to 2200 hours (iii) Third Shift - 2200 hours to 0600 hours

Manning and operation, Routine maintenance of Sewage Treatment Plants along with DG Sets and including all E/M inventory pertains to 450 KLD STP to be supplied, installed and commissioned in the contract to be carried out round the clock including all Sundays and public holidays by employing the man power and shift timings as mentioned below for operation of plant daily including supply of water treatment chemicals (i.e. Bio septic clean powder, sodium Hypochloride, Dap enzime, Calcium Hypo Chloride and Bleaching powder etc.,), Activated carbon Filter media (ACF). Activated Sand filter media (ASF), MBBR fluidized bio-media, Bacteria culture and other consumables required for smooth running of STP Plant and provision of reliever for weekly off and carrying out daily, weekly, monthly, quarterly & half yearly maintenance etc., complete for the remaining period of Second year during defects liability period after completion of 22 months of handing over of plant to MES all as specified and as directed.

(a) Man power to be employed per day:- (i) FGM(SK) Operator - 03 Persons (b) Shift Timings for FGM(SK) Operator:- (i) First Shift - 0600 hours to 1400 hours (ii) Second Shift - 1400 hours to 2200 hours (iii) Third Shift - 2200 hours to 0600 hours NOTE FOR ITEM NOS 16.03 , 16.05 & 16.07: A. Testing of treated water: The treated water shall be got tested by the tenderer once in a month from regional Govt.Lab/other approved lab. Samples shall be collected in the presence of engr-in-charge and test reports shall be submitted to engr-in-charge in original for record purpose.If parameters of tested water are beyond the limits mentioned above or contractor failed to carryout the required tests the recovery at double the quoted rates of the contractor for the entire month shall be made from the contractor. (B) The recovery as follows to be made from payment of the contractor in the following exegency:- a) Operator found absent from duty @Rs.300/- per shift b) Not carrying out Testing of water sample @Rs.2500/- each c) Not maintaing log sheet/Log book @ 300/- per day d) Not maintaining designed parameters@Rs double the rate quoted rate per shiftby the contractor.

Hydrotech Paryavaran India Pvt. Ltd.