Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.9 Cr
EMD Value
₹29.8 L
Closing Date
5 Nov 2026, 3:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
ELEC/C/ER
22 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as under: The conversion rate of US Dollars into Rupees shall be the daily representative exchange rates published by the Reserve Bank of India or entity authorized by RBI to do so for the relevant date or immediately previous date for which rates have been published. Where, relevant date shall be as on the last day of month previous to the one in which tender is invited. In case of any other currency, the same shall first be converted to US Dollars as on the last day of month previous to the one in which tender is invited, and the amount so derived in US Dollars shall be converted into Rupees at the aforesaid rate. The conversion rate of such currencies shall be the daily representative exchange rates published by the International Monetary Fund for the relevant date or immediately previous date for which rates have been published.
Complete details of various conditions, definitions, clarification of Financial Eligibility including the requirement for JVs and other entities are available in the attached tender document
In support of fulfillment of specified financial eligibility criteria, the tenderer has to submit the relevant documents (scanned copy in PDF format of the original document) with their e-offer. TENDERS NOT ACCOMPANIED BY DOCUMENTARY EVIDENCE IN SUPPORT OF FINANCIAL ELIGIBILITY CRITERIA WILL BE SUMMARILY REJECTED.
Please submit a certificate in the prescribed format annexure V (attached in the list of uploaded documents) to be uploaded by tenderer for verification/ confirmation of the documents submitted for compliance of eligibility / qualifying criteria. Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer.
46 conditions · 14 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Certificate as per the proforma enclosed vide Annexure-V(A), of Chapter-II of the attached Tender Document [Document uploading is Mandatory, if applicable to the Bidder].
If Bid Security is submitted through mode of Bank Guarantee, then submission of scanned copy of the Bank Guarantee towards Bid Security of the bid on e-tendering portal (IREPS) and original of above Bank Guarantee within 5 working days before closing date for submission of bids as per Para-5 of Instructions to Tenderers (ITT) in Chapter-II attached Tender Document. [Document uploading is Mandatory in case the mode of submission of Bid Security is Bank Guarantee]
All documents in support of fulfillment of Technical Eligibility Criteria as per Para 10.1 & Para 17.15.1 of Chapter-II of attached Tender Document.
All documents in support of fulfillment of Financial Eligibility Criteria as per Para 10.2 & 17.15.2 of attached Tender Document, duly filled up Annexure-VIB of Chapter-II along with Certificate issued from Chartered Accountant.
Bid Capacity as per Para 10.3 & 17.15.3 duly filled up Annexure- VI of Chapter-II of attached Tender Document (Applicable in tender having advertised value more than Rs.20 Crores). [Document uploading is Mandatory in case the advertised value of the instant tender more than Rs.20 Crores]
Certificate as per the proforma enclosed vide Annexure-V of Chapter-II of attached Tender Document.
All documents as mentioned in Clause 14 of Chapter-II of the attached Tender Document
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Power of attorney duly notarized and in favor of a single individual should be submitted as per Clause 15 of Chapter-II of the attached tender document [Document uploading is Mandatory if applicable to the Bidder]
All documents as mentioned in Clause 17 of Chapter-II of the attached Tender Document for JV in works tender [Document uploading is Mandatory if applicable to the Bidder]
All documents as mentioned in Clause 18 of Chapter-II of the attached tender document for Partnership firm in works tender. [Document uploading is Mandatory if applicable to the Bidder]
Bidders shall confirm and certify on the behalf of the tenderer including its constituents as under.
Bidders shall confirm and certify on the behalf of the tenderer including its constituents as under
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our onstituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
Contractor must make a site office, where engineer and engineer's representative can stay and monitoring the work. Site office must have following amenities 1. Two no. PCs with printer. These PCs to be handed over to site in-charge for his work. 2. One car similar to Bolero or Mahindra SUV 300. 3. Facility of drinking water. 4. Facility of electricity. 5. Bathroom and toilet. 6. 2 nos. bed for night stay, if needed. 7. 6 chairs and one table.
Design, Drawing, Supply, Erection, Testing & Commissioning of 25KV A.C. Single Phase Overhead Equipment, LT Supply Transformer for Kalyani to Ranaghat 3rd line, new switching post at Chakdaha and modification in feeding post at Ranaghat in connection with 3rd line work from Naihati to Ranaghat in Sealdah division of Eastern Railway.
EL-SDAH-CON-TRD-188-2026~ER
EL-SDAH-CON-TRD-188-2026
Open
Works - General
12 Months
Unknown (Unspecified Location)
₹0
₹29.8 L
13 Oct 2026
13 Oct 2026
22 Oct 2026
162 items across 5 schedules · ₹14,92,28,861 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Foot by foot survey and preparation of OHE pegging plan. | Per Track KM | 27.00 | 4,576 | 1,23,552 |
| 2 | Preparation of Design & Drawing of overhead equipment. | Per Track KM | 27.00 | 16,498 | 4,45,446 |
| 3 | Preparation and submission of designs and drawings for switching station. | Set | 2.00 | 19,676 | 39,352 |
| 4 | Supply of 10 KVA, 25KV/240 Volt auxiliary transformer with dropuot fuse switch assembly and anti-climbing device. | Numbers | 1.00 | 1,34,072 | 1,34,072 |
| 5 | Erection of 10 KVA, 25KV/240 Volt auxiliary transformer with dropuot fuse switch assembly and anti-climbing device. (under Non-Power Block) | Numbers | 1.00 | 6,060 | 6,060 |
| 6 | Supply of 25 KV vacuum type interruptor. | Numbers | 8.00 | 5,05,235 | 40,41,880 |
| 7 | Erection, testing and commissioning of 25 KV vacuum type interruptor. | Numbers | 7.00 | 12,205 | 85,435 |
| 8 | Erection, testing and commissioning of 25 KV vacuum type interruptor. (under Power Block) | Numbers | 1.00 | 24,409 | 24,409 |
| 9 | Supply of 25 KV. Potential Transformer Type -I. | Numbers | 10.00 | 81,076 | 8,10,760 |
| 10 | Erection, testing and commissioning of 25 KV. Potential Transformer Type -I. | Numbers | 6.00 | 2,512 | 15,072 |
| 11 | Erection, testing and commissioning of 25 KV. Potential Transformer Type -I. (under Power Block) | Numbers | 4.00 | 4,718 | 18,872 |
| 12 | Supply of 42KV lightning arrester (Gapless type) with insulating base and surge monitor & suitable disconnector. | Numbers | 10.00 | 45,653 | 4,56,530 |
| 13 | Erection, testing and commissioning of 42KV lightning arrester (Gapless type) with insulating base and surge monitor & suitable disconnector. | Numbers | 6.00 | 1,524 | 9,144 |
| 14 | Erection, testing and commissioning of 42KV lightning arrester (Gapless type) with insulating base and surge monitor & suitable disconnector. (under Power Block) | Numbers | 4.00 | 3,056 | 12,224 |
| 15 | Supply of Lead acid type battery 110V, 40AH. | Set | 2.00 | 1,24,905 | 2,49,810 |
| 16 | Erection and commissioning of Lead acid type battery 110V, 40AH. | Set | 2.00 | 10,587 | 21,174 |
| 17 | Supply of battery charger for 110V, 40AH battery. | Set | 2.00 | 1,03,078 | 2,06,156 |
| 18 | Erection and commissioning of battery charger for 110V, 40AH battery. | Set | 2.00 | 6,793 | 13,586 |
| 19 | Supply of terminal board in control cubicle. | Numbers | 2.00 | 11,507 | 23,014 |
| 20 | Erection of terminal board in control cubicle. | Numbers | 2.00 | 1,034 | 2,068 |
| 21 | Supply of 110V DC distribution board | Numbers | 2.00 | 25,820 | 51,640 |
| 22 | Erection of 110V DC distribution board. | Numbers | 2.00 | 1,221 | 2,442 |
| 23 | Supply of 240V AC distribution board | Numbers | 2.00 | 45,388 | 90,776 |
| 24 | Erection of 240V AC distribution board. | Numbers | 2.00 | 1,338 | 2,676 |
| 25 | Supply of RTUs at remote stations for SP and SSP as per RDSO spec no: TI/ RCC/ SCADA/ 01 30/ Rev2 with amendments including modification of software at RCC. | Numbers | 2.00 | 13,51,675 | 27,03,350 |
| 26 | Installation, testing and commissioning of RTUs at remote stations for SP and SSP as per RDSO spec no: TI/ RCC/ SCADA/ 01 30/ Rev2 with amendments including modification of software at RCC. | Numbers | 2.00 | 92,907 | 1,85,814 |
| 27 | Supply of cables for control and indication (7corex2.5sq.mm Copper). | Metre | 250.00 | 199 | 49,750 |
| 28 | Installation of cables for control and indication (7corex2.5sq.mm Copper). | Metre | 250.00 | 48 | 12,000 |
| 29 | Supply of cables for catenary indication (2core X 2.5 sq.mm Copper.) | Metre | 300.00 | 154 | 46,200 |
| 30 | Installation of cables for catenary indication (2core X 2.5 sq.mm Copper.) | Metre | 300.00 | 48 | 14,400 |
| 31 | Supply of cables for heater supply (2 crore X 4 sq.mm.AL.) | Metre | 300.00 | 152 | 45,600 |
| 32 | Installation of cables for heater supply (2 crore X 4 sq.mm.AL.) | Metre | 300.00 | 48 | 14,400 |
| 33 | Supply of cables for 110V DC supply (2x 4 sq.mm Copper.) | Metre | 350.00 | 171 | 59,850 |
| 34 | Installation of cables for 110V DC supply (2x 4 sq.mm Copper.) | Metre | 350.00 | 48 | 16,800 |
| 35 | Supply of cables for 240V AC supply (2 core x 25 sq. mm. Al.) | Metre | 350.00 | 206 | 72,100 |
| 36 | Installation of cables for 240V AC supply (2 core x 25 sq. mm. Al.) | Metre | 350.00 | 63 | 22,050 |
| 37 | Supply of materials for termination of 25KV Copper Feeder wire. | Numbers | 25.00 | 3,993 | 99,825 |
| 38 | Erection of materials for termination of 25KV Copper Feeder wire. | Numbers | 15.00 | 515 | 7,725 |
| 39 | Erection of materials for termination of 25KV Copper Feeder wire. (under Power Block) | Numbers | 10.00 | 1,237 | 12,370 |
| 40 | Supply and erection of sectioning/schematic diagram boards. | Numbers | 8.00 | 8,855 | 70,840 |
| 41 | Supply and erection of shock treatment chart (Laminated). Lamination thickness not less than 200 micron. | Numbers | 15.00 | 2,780 | 41,700 |
| 42 | Supply and erection of Key box for isolator. | Numbers | 6.00 | 647 | 3,882 |
| 43 | Supply & Erection of First aid box. | Numbers | 15.00 | 1,109 | 16,635 |
| 44 | Removal of SPS and insulator | Numbers | 20.00 | 2,839 | 56,780 |
| 45 | Supply and fitment of ABC stored pressure type fire extinguisher as per IS: 13849, dated: 1993 of capacity 5Kg. This should be wall mounted type. | Numbers | 4.00 | 2,604 | 10,416 |
| 46 | Supply & fitment of fire buckets of capacity of 9 lt. This should be fixed in a stand fixed on the ground filled with dry sand. | Numbers | 4.00 | 812 | 3,248 |
| 47 | Gravel carpeting with gravel size (12mm.) in switching yard (10cm. Thick) including supply of Gravel. | Sqm | 100.00 | 1,950 | 1,95,000 |
| 48 | Dismantling of AT with DO fuse switch assembly | Numbers | 10.00 | 1,785 | 17,850 |
| 49 | Dismantling of post insulator. | Numbers | 12.00 | 99 | 1,188 |
| 50 | Dismantling of SPS. | MT | 4.00 | 3,785 | 15,140 |
| 51 | Dismantling of foundation. | cum | 50.00 | 1,493 | 74,650 |
| 52 | Dismantling of Guy rod assembly. | Numbers | 10.00 | 524 | 5,240 |
| 53 | Cutting of old mast / Head Span Mast. | Numbers | 20.00 | 2,446 | 48,920 |
| 54 | Loading, Unloading and Transportation of Railway supply materials (Contact wire, Catenary wire etc.) from Railway stores to work site. | MT-Km 10000.00 | — | 15 | 1,50,000 |
| 55 | Dismantling of feeder wire/return conductor/cross feeder wire. | Metre | 1000.00 | 37 | 37,000 |
| 56 | Splicing and extension of an anchored overhead equipment. (under Power Block) | Numbers | 20.00 | 5,604 | 1,12,080 |
| 57 | Adjustment of OHE and Tower wagon checking. (under Power Block) | Each Span | 150.00 | 2,974 | 4,46,100 |
| 58 | Cutting of old mast / Head Span Mast. (under Power Block) | Numbers | 151.00 | 8,526 | 12,87,426 |
| 59 | Dismantling of OHE including Head Span. (under Power Block) | Kilometre | 2.00 | 25,993 | 51,986 |
| 60 | Dismantling of cantilever assembly/ OHE support. (under Power Block) | Numbers | 200.00 | 993 | 1,98,600 |
| 61 | Dismantling of single pole isolator. (under Power Block) | Numbers | 5.00 | 3,708 | 18,540 |
| 62 | Dismantling of SPS (under Power Block) | MT | 2.00 | 5,996 | 11,992 |
| 63 | Dismantling of Guy rod assembly. (under Power Block) | Numbers | 15.00 | 932 | 13,980 |
| 64 | Dismantling of termination fittings. (under Power Block) | Numbers | 20.00 | 685 | 13,700 |
| 65 | Dismantling of portal/TTC boom including cutting of upright. (under Power Block) | Numbers | 10.00 | 14,901 | 1,49,010 |
| 66 | Dismantling of section insulator assembly. (under Power Block) | Numbers | 4.00 | 3,507 | 14,028 |
| 67 | Dismantling of RE & guide tube assembly. (under Power Block) | Numbers | 16.00 | 4,066 | 65,056 |
| 68 | Dismantling jumpers. (under Power Block) | Numbers | 23.00 | 411 | 9,453 |
| 69 | Dismantling of number plate/caution board with clamp. (under Power Block) | Numbers | 100.00 | 60 | 6,000 |
| 70 | Dismantling of 9-tonne insulator. (under Power Block) | Numbers | 12.00 | 679 | 8,148 |
| 71 | Dismantling of anti-creep. (under Power Block) | Numbers | 5.00 | 4,654 | 23,270 |
| 72 | Dismantling of feeder wire/return conductor/cross feeder wire. (under Power Block) | Metre | 1000.00 | 85 | 85,000 |
| 73 | Dismantling of pull off arrangement. (under Power Block) | Numbers | 2.00 | 837 | 1,674 |
| Schedule total | ₹1,35,12,916 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Formatofselfcertification-1.pdf
ATTACHMENT
StandardTenderDocumentTRD188_compressed.pdf Tender Document TRD 188
ATTACHMENT
StandardExplanatoryNoteTRD188.pdf
ATTACHMENT
TENDERNOTICETRD188.pdf
ATTACHMENT
GCCACS11_compressed.pdf
ATTACHMENT
ACS12GCCforWorks_compressed_1.pdf
ATTACHMENT
StandardTenderDocumentTRD188_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .