Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST QUOTED BIDDER | |
| 2 | L2₹18.3 L+₹16,241.40 (0.90%)Rejected-Finance D NO 3 9 560 P 17 E ROAD NO 4 SRI BALAJI NAGAR MANSOORABAD HYDERABAD 500068 | HYDERABAD | MEDCHAL MALKAJGIRI | TELANGANA | 500068 | L2 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER | |
| 3 | L3₹19.0 L+₹89,794.70 (4.96%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER | |
| 4 | L4₹19.7 L+₹1.6 L (8.78%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER | |
| 5 | L5₹19.8 L+₹1.7 L (9.58%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
22 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SECUNDERABAD
CWE AF SECUNDERABAD
ADDN / ALTN TO TOILETS OF BLDG NO. T-57 (REB), T-2 (LGS SECTION) AND PROVN OF TOILETS IN BLDG AT AFS BEGUMPET UNDER GE (AF) HAKIMPET
2024_MES_643776_1
84747/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF HAKIMPET
As per NIT
9 documents required · 9 mandatory
₹500
GE AF HAKIMPET
₹38,000
Yes
29 Mar 2024
23 Feb 2024
25 Mar 2024
23 Feb 2024
22 Mar 2024
8 Mar 2024
23 Feb 2024 - 7 Mar 2024
Amount
SCHEDULE 'A' PART -I (B/R PORTION) :- Surface excavation not exceeding 30 cm deep and averaging 15 cm deep & getting out in all type soil complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out any type of soil complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation filling and mass concrete complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.complete all as specified and as directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM1:6 complete all as specified and as directed.
M&L for Formwork to sides of rough finished surfaces of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
M&L for use and waste Formwork to sides of pillars, post, stuts, coloumn and stanchirns rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and as directed.
M&L for use and wase Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) for fair finished surface complete all as specified and as directed.
M&L for use and waste Formwork to rough finished surfaces of sides and soffits of floor or roof beam, beam haunching, lintels, cantilevers, shelves including supports, overhangs etc complete all as specified and as directed.
M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) complete all as specified and as directed.
M&L TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) complete all as specified and as directed.
M&L Reinforced Cement concrete Nominal Mix, Type B1 1:2:4 (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and as directed.
M & L for RCC Nominal Mix, Type B1 1:2:4 (using 20mm graded stone aggregate) for Beams catileveres bressummers, lintels over 1.5m span and similar work complete all as specified and as directed.
M & L for Damp proof course 40mm thick in cement concrete 1:2:4 type (B-0) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.
Supply only integral water proofing compound complete all as specified and as directed.
M&L for RCC Nominal Mix, Type B1 1:2:4 (using 20 mm grade stone aggregate) for columns, pillars, piers, posts and struts etc complete all as specified and as directed.
M&L for RCC Nominal Mix, Type B1 1:2:4 (using 20 mm grade stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M & L for broken stone or boulders hardcore of gauge exc 63 mm but n.exc. 150 mm, deposited, spread and levelled in layers n.exc. 75mm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.
M&L for 100mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base of floor complete all as specified and as directed.
M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in floor complete all as specified and as directed.
M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.
M&L for Non skid colored ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for Glazed ceramic Coloured tiles 450 x 350 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and as directed.
M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/Skirting complete all as specified and as directed.
M&L for rendering 15 mm thick cement plaster on fair surfaces of brick work or concrete surfaces in CM 1:4 finished to even and smooth surfaces in without using extra cement etc complete all as specified and as directed.
M&L for rendering 15 mm thick cement plaster on fair brick work or concrete surfaces in CM 1:6 finished to even and smooth sitfaces in without using extra cement incl complete all as specified and as directed.
M&L for rendering 5 mm thick ceiling cement plaster on fair brick work or concrete surfaces in CM 1:4 finished to even and smooth surfaces in without using extra cement incl complete all as specified and as directed.
M&L for preperaing new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.
M&L for for preparation of new plastered/ undecorated surface of wall and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in , plinth protection , including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering 10mm thick with CM (1:3) on concrete surfaces (on top of roof slab) mixed with water proofing compound as per manufacturer's instructions surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately
Supply only Liquid water proofing compound complete all as specified and as directed.
M & L for cleaning the roof surface and applying oil bond bitumen primer @ 0.2 kg/sqm providing and laying 3mm thick APP modified water proofing membrane weight not less than 4kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800 N/sqcm tearing strength 180N with minimum of 10cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed by engineer in charge. Note: the quoted rate shall included for cutting grooves in roof parapets, upward facias, etc and inserting of membrane and making good with CM 1:3 wherever required complete all as specified and as directed.
S & F Rotational moulded PVC water storage tanks 1000 Ltrs capcity (cylindrical vertical with closed top) three layer hoissted and fixed in position complete all as specified and as directed.
S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and as directed.
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and as directed.
M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as specified and as directed.
M&L for reinforced concrete pipes, class NP3, laind and jointed complete with collars 150mm bore pipe complete all as specified and as directed.
M&L for PCC (1:2:4) type B-1 using (20mm graded stone aggregate) for benching coping etc incl necessary form work complete all as specified and as directed.
All as per ser item No. 42 above but in CM 1:6 complete all as specified and as directed.
M&L for Precast reinforced cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate ) for manhole cover , septic tank covers slabs etc including necessary from work and set in CM (1:4) complete all as specified and as directed. .Note :- reinforcement will measured and paid seperately
S&F PVC (SWR) junction single(single T) equal or unequal. 110 mm dia complete all as specified and as directed.
S&F PVC (SWR) junction double,(double T) equal or unequal. 110 mm dia with access door complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.
S&F PVC (SWR) bend/shoes of 110 mm bore complete all as specified and as directed.
Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge
Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and as directed by the Engineer-in-Charge
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
Supply and fix 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 150 mm size extruded aluminium door handles fabricated type fixed in repairs complete all as specified and as directed by the Engineer-in-Charge
Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed by the Engineer-in-Charge
Supply and fix vitreous china ware wash hand basin 470 x 470 x 110mm size Table Top Basin complete all as specified and as directed. Make JAGUAR Cat No FSS-WHT-29901 or equivalent in Hindware/Cera
Supply and fix Single Lever mini Basin mixer without Popup waste system with 450mm ling Braided Hoses complete all as specified and as directed. Make : JAGUAR Cat No FLR-5025B or equivalent in Hindware/Cera
S&F SS toilet paper holder with flap complete all as specified and as directed. Make : JAGUOR code no. Ahs 1553
S/F Stainless steel towel ring square complete all as specified and as directed. Make: Jaguar Cat No 35721P
S/F Soap dish holder complete all as specified and as directed. Make : Jaguar cat No 35731P
S&F Angle/stop valves, cast copper alloy, chromium plated crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and.(15mm bore) complete all as specified and as directed.
Supply and fix PVC connections 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends complete all as specified and as directed.
S&F Vitreous China premium/1st quality wash down water closet wall hung EWC white/ivory/off white (closed pattern incl all necessary accessories like rag bolts/gel gasket including 10 ltrs PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low andPlastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
S&F Single piece WC with PP soft close seat cover,Hinges,Dual Flush Cistern fitting, Fixing Accessories and Accessories set,Cistern fittings,S trap-300 of size 360 x 640 x 685 mm S trap -220mm Jaguar Cat No SLS-WHT-6851S220PP
S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed.
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.
S&F health faucet with fluxi pipe and hand shower the length of hose 1m fitted to the tap complete all as specified and as directed. Make: JAGUOR Code ALD CHR 565 or equivalent in Hindware/Cera.
S&F CP 2 way bib cock. Make : JAGUAR Cat No 38041 or equivalent in Hindware/Cera
Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed.
Supplying and laying 20mm of CPVC pipes SDR11 & Plain CPVC SDR 11 fitting on walls/ceiling or laying in floors complete all as specified and as directed.
All same as per item No 74 above but 20 mm bore.
Returning filling in excavated material any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
Removing surplus excavatet any type of soil to a distance n exc 50 m and deposting where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.
S & F in repairs Vitreous china Urinal, half stall type, white (Excluding flushing cistern, flush pipe and waste pipe), PVC Connection pipe 15mm bore, 450mm long with PTMT nuts, Push tap of 15mm size any colour high pressure of PTMT screwed for iron pipe and fixed (Minimum weight 15mm-47gms/20mm-75gms), Urinal Spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and as directed.
S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and as directed.
S&F of 18mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face; fixed with screws complete all as specified and as directed.
Extra over rates of block board or veneered particle board or plywood for external teak wood lipping, 6mm thick fixed with nails 18 mm thick complete all as specified and as directed.
M&L for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.
S&F of 75 mm Brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.
S&F of 100 mm long chromium plated brass handles fancy type all complete all as specified and as directed.
S&F of Cup board lock brass 4 levers complete all as specified and as directed.
S&F of Stainless steel auto closing cup-board hinges complete all as specified and as directed.
M&L for Granite(of any type) work (table rubbed and polished) of 20 mm th in steps, jambs, pillars, window- cills,cooking platforms and like over cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.
Providing edge moulding to 18-20mm thick Granite stofne any description stone of counters vanities etc. including machine polishing to edge to give high gloss fininsh etc, complete all as specified and as directed.
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frmes) complete all as specified and as directed.
M&L Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10cm but n exc 20 cm girth complete all as specified and as directed.
Demolition of cement concrete (unreinforced) including tiles in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
S & F 75mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as in repairs complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and as directed.
S & F 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified and as directed.
S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed.
Removing debris / bldg materials to a distance of exc 1.5Km but n exc 5 Km including loading and dumping/ levelling at the destination complete all as specified and as directed.
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and as directed.
Dismantling ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed.
S&F 600x600mm GI bottom pre coated exposed snap grid frame work with 25x25x7mm wall angle and 25mm web, 35mm flange 0.7mm thick T-sections hanging with 4mm dia GI wire (up to 1200 mm long) including level clip, soffit cleat and 12.7 mm dia metal Raw plug at 1200mm c/c in both direction complete all as specified and directed
S&F PVC laminated designed (one side PVC lamination and other side aluminium paper) gypsum board 600 X 600 X 8 mm thick tiles decorative type in GI grid frame work with screws or clips etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs vitreous china wash down water closet pedestral pan white/ coloured, including, plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.
Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.
SCHEDULE 'A' PART -II (E/M PORTION) Taking down copper / aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials and making good disturbed surfaces of walls, floors etc, including paint tuch up to match with the existing surface as per site requirement, complete all as specified and directed.
M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including non metalic, med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sq mm PVC indulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made of MS sheet concealed in walls and cover with 3 mm thick hylum sheet for fixing switches, socket outlets, fan regulators etc, all as specified and directed
(a) One light point controlled by one way switch.
(b) One ceiling fan/ exhaut fan point controlled by one one way switch.
(c) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No. 105 here-in-before but with 4 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor, complete all as specified and directed.
S&F Switch piano flush type, single pole one way 5 Amps 240 volts, complete all as specified and directed.
Supply and fixing for ceiling rose 3 terminals
Supply and fix Switch socket combination 2 in 1, 5 Pin, 5 Amps flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells
Supply and fix Switch socket combination, 3 pin, 5 and 15A, 5 in 1 flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
M&L for making hole in brick masonary wall suitable for exhaust fan of size upto 300mm and making good all as specified and as directed by Engr-in-Charge
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as directed by Engr-in-Charge
Supply and fix louvers/shutters made of galvanised sheet to open and close opening/hole made for exhaust fan of size 300 mm dia automatically
Supply & fix MCB DB SPN 4 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works.
Supply & fix following item including necessary connection in incoming and outgoing complete all as specified :-
(a) MCB SP 6 to 32 Amps 'C' Curve
(b) MCB SPN 32 Amps 'C' Curve
Material and Labour for Submain wiring with 6 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete including taking down old unserviceable submain wiring complete all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm nominal cross section stranded conductor 2 core in service connections complete including necessary earth work, sand cushioning, PCC cable cover, provision of G.I. pipe under roads, floor, on wall complete all as specified and directed
Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles.etc complete as specified and as directed.
Supply and laying Pipe galvanised steel tubing medium Gread class screwed socket jointing including all Fittings such as bend, elbows, tees, short piece jointer,connector,back nut, cap etc of Size 20 mmdia complete all as specified and directed.
Supply and Fix Stop valves, cast copper alloy,screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply and fixing Ball brass valves of size 20mm dia , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified.
Cutting of GI Pipe upto 50 mm dia in Position for insertion of new TEE, Supply and fixing of Union and Tee Reducer of required size dimention and reconnecting the main water supply line with all required fittings complete all as directed by Engr-in-Charge.
J.V.V.K.PRABHAKARARAO
SURA INFRASTRUCTURE
K P R ENTERPRISES
K LAKSHMAN SINGH AND CO
KOGANTI CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .