Construction of Compound wall (38 m) and Cremation Shed in Samathuva Burial Ground in Balagurunathapuram H/O Upparpatty AGAMT 2025-2026

Amount

Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15 cm thick well rammed and consolidate and depositing the surplus earth in all places shown by the departmental officers with initial lead and lift etc., complying with standard specification asperSS20 B.

Supplying and filling in foundation and basement with filling Red Gravel including cost and conveyance and all chrges etc

Refilling with excavated earth in layers of mot more than 15cm thick including watering ramming and consolidation etc., complete as per standard specification.

Plain Cement Concrete 1:4:8 using 40 mm HBG metal for basement and flooring layers not more than 15 cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification

Brick work in CM 1 : 5 using country bricks ground moulded of size 23 x 11 x 7 cm including cost and conveyance of materials to site and all other labour charges as per standard specification.

Supplying fabricating and placing in position mild steel or ribbed steel for all reinforced concrete works as per the design given including cost of steel and binding wire and all other labour charges as per standard specification.

R.C.C. 1:1.5:3 using 20mm gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc. shall be finished smooth with cement mortar 1:3 12mm thick and with kraft paper without claiming extra etc… as directed by the departmental officers complete complying with standard specification. The rate is including vibration charges.

Plastering in CM 1:3, 10 mm thick , including cost and conveyance of all materials to site and all other labour charges including curing etc., as per standard specification.

Plastering in CM 1 : 5, 12 mm thick , including cost and conveyance of all materials to site and all other labour charges including curing etc., as per standard specification.

cement concrete 1:2:4 mix using 20mm HBG metal for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or Roof slab wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc., shall be finished smooth with Cement Mortar 1:3, 12mm thick and with Kraft paper without claming etc., as directed by the department officers as per standard specification.

Painting two coats with approved plastic emulsiom paint using one coat of priming etc. complete - 10 Sqm. SI 359

Finishing the top of roof with one course of Machine Pressed Tiles of size 20 cm x 20 cm x 2cm of approved quality laid in CEMENT MORTAR 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide, etc., complete complying with standard specification.

Geophysical survey charges (minimum 3 locations) including transportation charges and labour charges etc. complete.

Drilling of 150mm dia vertical bore well in hard rock area including labour charges for inserting of casing pipe etc. Over burden soil

Hard rock areas

Supply and delivery of Single phase 2 HP submersible pump set for 150mm dia bore well with ISI mark IS 80.34 without panel board (20 x 150) LPM x m

Supply and delivery of 150mm dia PVC casing pipes ( Casing shallow depth) as per IS 12818 / 2010

Supply and fixing of Single phase panel board suitable for 2 HP motor

Supply and delivery of 4 sq.mm 3 core flat cable

Erection of 2 HP submersible motor in bore well including fixing and jointing submersible cable with proper clamps up to the strater to required depth etc.,

Supply and delivery of PVC pipes, GI & specials 32 mm GI pipe

32 mm GI coupling

32 mm GI bend

32 mm GI union

32 mm GI Elbow

180mm Bore well cover

32mm GI Hex Nipple

Supply and run of 2 of 4 Sq.mm (56/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V on 7/20 GI bearer wire for service connection mains SD 63.

Supply and fixing of 6 way SPDB of 16A / with 16A DPIC switch of 500V (side handle) with F&N on suitable T.W. board with PWD earthling SD 143

Supply and delivery of M.S. Kiosk of size of 0.75m x 0.45mm x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3mm including cutting, welding, grinding.

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And

Supply and delivery of 1000 Litre HDPE Tank

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

S.Renganathan (BID ID -1306696)