CWEAFJ-35/2021-22 SPECIAL REPAIR TO SMQ BLOCKS PHASE-I

Amount

B/R Portion

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc all as specified.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed.

Precast cement concrete louvers and Jallies 25mm thick (measured solid), type B-0 1:2:4 using 12.5 mm graded crushed stone aggregate set in cement mortar 1:4, complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position and removing rubbish from the site, complete all as specified and directed.

Reinforced Cement Concrete type B-1 1:2:4 using 20mm graded crushed stone aggregate as in chajjas etc., complete all as specified and as directed.

Reinforced Cement Concrete type B-1 1:2:4 using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete, complete all as specified and as directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges not exceeding 200mm thick with rough finished flat surface of concrete, complete all as specified and as directed.

TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.

TMT bars 6 to 8mm dia, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.

Plain, black, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels upto 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stone, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces, mixed with integral water proofing compound, finished even and smooth without using extra cement, complete all as specified. Note : Integral Water Proofing Compound shall be measured and paid separately.

Supply only Liquid Water Proofing compound all as specified and as directed.

Rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 5mm thick in cement mortar 1:3 in Fascia or edging of Chajjas, Ceiling and Roof projections etc., including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement, complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm. thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, pointed and bedded in any type of mortar, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and fair without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 3.0m in length and joint shall be made at every turning / corners, complete all as specified and directed.

Non-skid coloured glazed, joint free, ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 400mm x 400mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Non-skid coloured glazed, joint free, ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 400mm x 400mm x 7mm thick, over and including 10mm thick screed bed in CM 1:4 as in skirtings etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Glazed ceramic coloured, joint free, wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 450mm x 350mm x 7mm / 350mm x 250mm x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

18mm to 20mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

16mm to 18mm thick, machine cut Kota stone as in riser or steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and rounding off edges complete with mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:3 all as specified and as directed.

Makrana white marble 20mm thick, machine cut, bedded, jointed and pointed white cement slurry, including cutting and polishing, laid , over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

Machine cut green marble slab as in cooking shelves (of any type) of approved shade 14-15mm thick, as in Vertical / Horizontal surfaces bedded and jointed with grey cement slurry and pointed with white cement with and mixture pigment to match the shade of stone over and including 15mm thick screed bed CM 1:4, cutting and polishing and rounding the exposed edge of the marble slab and cutting hole for pipe, complete all as specified and directed. Notes : 1. Marble slab in single piece in one length be provided. 2. Vertical / horizontal surfaces shall be decided by Engr-in-Charge during execution of work.

75mm thick PCC 1:4:8, type D-1 (using 20mm graded crushed stone aggregate) as in sub-base, finished even and fair, to receive tiles, complete all as specified and as directed.

Factory made precast concrete designer, glossy finish, paver tiles any colour, shape and size not less then 300mm x 300mm x 20mm thickness, M-25 grade pointed with grey cement and pigment over 15mm thick CM 1:4 screed bed or bedding layer complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed. Note for Serial Item No 33 & 34 : The disturbed surface during taking down shall be made good by the contractor to match with the existing finishes without any extra cost. Nothing extra is admissible for the material and labour for making good the disturbed surface.

Taking down shutter of any description, exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and refixing in the same opening complete, all as specified and directed.

2nd Class hardwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

MS work as in hold fasts, bands, straps, wall ties, plain angle cleats and similar articles including welding complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 105mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 No's of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge, complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 125mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 No's of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge, complete all as specified and directed.

PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frames and in bed block for holdfast etc. similar work etc. complete all as specified and directed.

25mm thick factory made Flush Shutters, particle board core construction, and plywood face panels commercial type on both face, complete as specified and directed.

35mm thick factory made Flush Shutters, solid core construction, with particle board core and plywood face panels commercial type on both face, exterior grade, covered with decorative face veneers with matching lippig / frame on both sides complete as specified and directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

35mm thick, 2nd Class hard wood, plain, framed, Panelled Shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkat, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening etc., complete as specified and directed.

Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I.

Factory made fully glazed (Frosted . Ground / Obscured) fully glazed PVC Window / Ventilator Shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I.

Factory made Steel Window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm including grill using 10Sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to frame shutter complete all as specified and as directed :- (a) Hold Fast, 150mm long of Flat Iron 12mm x 3mm made to shape 04 Nos per window (b) Handle of Z-Section 20mm x 25mm, 100mm Long 01 No per Leaf (c) Stainless Steel Tower bolt 150mm long - 02No per leaf

(d) Z-section 20mm x 25mm, 100mm Long Stopper 1 No per Leaf (e) Cleat 55mm Long of Hollow Square 15mm x 20mm x 63mm welded to Hinge 01 No per Leaf (f) MS Pintal hinges of size 75mm x 12mm 02 Nos per Leaf including Stainless Steel Wire Cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with aluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete.

Mild steel framed works such as grills, framed guard bars, etc. and similar work conforming to Fe-410-O or Fe-310-O grade, including bending, cutting and welding as required, fixed in repairs, complete all as specified and as directed.

Small fittings of 2nd class hard wood such as brackets of any type, hinge blocks, shaped doors and window stops, including all necessary labours, article not exceeding 200 cu cm each, complete all as specified and directed.

Butt hinges, medium weight, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 75mm size, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm, and fixing clips of sheet and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

Aluminium anodised barrel tower bolt of extruded section complete of size 150mm long complete all as specified and directed.

Aluminium anodised handle complete of size 150mm long complete fixed in repairs complete all as specified and directed.

300mm Helical door spring, ordinary Rat Tail Rod pattern springs, including roller and roller plate complete fixed in repairs complete all as specified and directed.

4mm thick figured glass, pin head type and glazing with oil putty, wooden beads or fixed in aluminium window shutter in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Prelaminated PVC Board of 19/20mm thickness, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination 2, 4 or 6 design and back plain fixed with screws to timber framework as in wall panelling, cup board shutters, shelves and partition complete all as specified and directed.

Continuous (Piano) hinges, 40 mm width of flap mild steel, bright finish or electrogalvanised complete all as specified and directed.

50mm dia, ploished Hardwood Knobs fixed with nut, screws and washers complete all as specified and directed.

Aluminium Hasp and Staple, 100mm safety type with mild steel hinge pin including bolt type complete all as specified and directed.

Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in, complete all as specified and directed.

Heavy duty magnetic catch as in cupboard shutters complete all as specified and as directed.

Stainless Steel, 25 mm dia fancy type Curtain Rods fixed to brackets including brackets and fancy type corner ends, fixed in repairs, complete all as specified and directed.

Preparation of old concrete surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and applying the following Roof Treatment complete all as directed :- (a) Applying 1st course of 15mm thick screed bed with cement mortar 1:4 over concrete surface. (b) Applying 2nd course of bituminous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (c) Applying 3rd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

(d) Applying 4th course of APP (Atactic Polypropylene) modified prefabricated five layer polymeric membrane 3mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm end overlap. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm and blended with fine sand in dry condition @ 0.50Kg/Sqm dusted over the bitumen coat. (f) Applying a 6th course of Solar Reflective Bituminous Aluminium Paint @ 100 grams/Sqm all as specified and as directed.

The membrane shall be laid using butane torch. The membrane shall be first laid upto the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering upto a distance of 300mm. In case the parapet height is less than 500mm, the membrane shall be terminated at the top of parapet. All rain water pipe openings shall be suitably sealed with APP membrane including disconnection and refixing in same position the existing Water Storage Tanks and all GI Pipes and fittings complete all as specified and directed. Notes : 1. Contractor shall be write "Name of Contractor and Date of Laying of Membrane" with paint on the wall after laying of membrane in all respect. 2. The rate includes for filling of cracks in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster all as directed.

Rendering 20mm thick in cement mortar 1:4 on brick work or concrete surfaces, mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitous composite compound as specified and approved and cement slurry in two layers 1st layer @ 0.488 Kg/Sqm and 2nd layer @ 0.242 Kg/Sqm mixed with 0.126 Kg of compound complete with minimum 04 hours allowed to air cure between these layers between these layers and applying 200 microns polyflim with adhesive complete all as specified and as directed.

Cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in mass concreting in Sunken Floor, complete all as specified and directed.

Aluminium sheet covering 1mm thick to drainage board / expansion joints fixed with aluminiun alloy screws complete as directed.

Stainless steel sink with drainage board 1.0mm thick sheet of approved make with plug, washer & waste, including bedding cement mortar, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified and directed.

Kitchen Plate Rack, including shelves, made of stainless steel not less than 1mm thick with fixing accessories, overall size 900 mm x 900mm x 250 mm, fixed in repairs, complete all as specified and directed.

Brass Chromium Plated Mixer for mixing Hot & Cold water for Sink screwed down for 15mm bore iron pipe or for unions and fixed, complete all as specified and directed.

Disconnecting existing tanks exceeding 250 litres but not exceeding 500 litres, setting aside (or lowering if required for repairs, cleaning etc. and hoisting if required reconnecting and refixing in position, complete all as specified and directed.

Rotational moulded polyethylene Water Storage Tanks of capacity 500 litres, (cylindrical vertical with threaded top), three layered, hoisted and fixed in position including supply and fixing necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, check nuts & washer, brass valve 20mm high pressure with polythene float and fly nut etc. complete, fixed in repairs, all as specified and directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 20mm dia bore iron pipe complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 20mm dia complete all as specified and as directed.

Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed.

Bib tap with wall flange cast copper alloy chromium plated, long body fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Stop cock / Angle valve with adjustable wall flange CP cast copper alloy, fancy type, with capstan head handle and adjustable wall flange, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed.

Stop valve, long cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore, fixed in repairs, complete all as specified and directed.

Brass chromium plated Shower rose 125mm with swivel joints including fixing to steel pipe or union, fixed in repairs, complete all as specified and as directed.

Brass chromium plated shower arm with wall flange, fancy type, 195mm long having 45° bend screwed down for 15mm bore iron pipe or for unions and fixed, complete all as specified and directed.

Vitreous china squatting pan, Orissa pattern, size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, fixed in repairs, complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Vitreous china wash hand basin 550 x 400mm, white flat back including cast iron bracket, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, fixed in repairs, complete all as specified and as directed.

PVC connection 45cm long fitted with two Nos of brass check nuts and washers complete, fixed to 15mm bore iron pipes, complete all as specified and directed.

Chromium Plated connection pipe for geyser, 12mm dia 45cm long fitted with two Nos of brass check nuts and washers complete, complete all as specified and directed.

Chromium plated Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed.

Soap dish, fancy type, brass chromium plated fixed to walls with brass chromium plated screws complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 15cm wide with chromium plated bracket guard and railing, 60cm long, complete all as specified and directed.

Corner glass shelf of size 300mm x 300mm complete all as specified and as directed. Make : Cera Cat Part No F-5005103 or equivalent as approved.

HDPE Waste Pipe 32mm dia, pressure rating 6 Kgs/ Sqcm, with cup to fit waste coupling complete all as specified and directed.

PVC (SWR) pipes single socketed, 110mm bore in any length with rubber ring joints, laid in floors / walls, fixed in repairs, complete all as specified and directed.

PVC (SWR) bend 110mm bore complete all as specified and directed.

Cast Iron soil waste and vent pipe, sand cast, ISI marked 100mm bore, in any length with or without ears with lead joints laid in floor/walls, fixed in repairs, all as specified.

Cast Iron soil waste and vent pipe, sand cast, ISI marked 75mm bore, in any length with or without ears with lead joints laid in floor/walls, fixed in repairs, all as specified.

Cast Iron soil waste and vent pipe, sand cast, ISI marked 50mm bore, in any length with or without ears with lead joints laid in floor/walls, fixed in repairs, all as specified.

Cast Iron bends (any radius) diminishing pieces or tapers 100mm dia (larger bore measured) all as specified and as directed.

Cast Iron bends (any radius) diminishing pieces or tapers 75mm dia (larger bore measured) all as specified and as directed.

Cast Iron Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100mm dia, all as specified.

Cast Iron Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75mm dia, all as specified.

Cast Iron vent cowl, 50mm bore, complete all as specified and as directed.

Stack clamp made of 50 x 5mm flat iron and 16mm dia round iron stays including bolt and nuts and securing ends of stay to water pipes suitable for 100 / 110mm dia pipe including taking down unserviceable clamp all as specified and directed.

Stack clamp made of 50 x 5mm flat iron and 16mm dia round iron stays including bolt and nuts and securing ends of stay to water pipes suitable for 75mm dia pipe including taking down unserviceable clamp all as specified and directed.

PVC (SWR) gully trap 125mm / 110mm with grating, setting and jointing with solvent cement complete all as specified and as directed.

PVC (SWR) floor / nahani trap 75mm with grating, including jointing to waste pipe with solvent cement complete all as specified and as directed.

PCC 1:3:6 type C-2 (using 20mm graded aggregate) as in surface channels and drains using 40mm graded crushed stone aggregate complete all as specified and directed.

Extra for fair finished drain 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends, complete all as specified and directed.

Preparation new plastered or previously untreated surfaces of walls and applying three coats of white wash, complete all as specified and directed.

Preparation old plastered surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash, complete all as specified and directed.

Preparation new plastered or previously untreated surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

Preparation old plastered surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash, complete all as specified and directed.

Preparation of newly plastered surfaces and applying two coats of acrylic exterior emulsion paint minimum four colours as approved of any shade / colour in camouflage pattern over a coat of primer including preparation of surfaces as per manufacture instructions complete all as specified and as directed.

Preparation old plastered surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of acrylic exterior emulsion paint in camouflage pattern, complete all as specified and directed.

Preparation new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer coat over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm complete all as specified and as directed.

Preparation old plastered surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying applying one coats of oil emulsion distemper complete all as specified and directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of old wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

E/M Portion

Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including existing concealed conduit 20mm dia or more as per the site requirement including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box for mounting switches etc. including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 125 here-in-before but for One light point controlled by two 2-way switches, complete all as specified and as directed.

All as per the description of Serial Item No 125 here-in-before but for one 3 pin socket outlet 05/06 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 125 here-in-before but for one 5 pin socket outlet 05/06 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 125 here-in-before but for one 3 pin socket outlet 15/16 Amp independent board using cable of size 2.5 Sqmm including 2.5 Sqmm copper earth wire (green colour) all as specified and directed.

Switch piano, flush type, 05/06 Amps, single pole, one way, complete all as specified and as directed.

Switch piano, flush type, 05/06 Amps, single pole, two way, complete all as specified and as directed.

Socket out let universal type, 2 in 1, 2 and 3 pin 05/06 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Switch piano, flush type, 15/16 Amps, single pole, one way, complete all as specified and as directed.

Socket outlet universal type, 2 in 1, 3 pin 5 and 15/16 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Bell push 5 Amps 230 Volts single pole complete all as specified and directed.

Bell, ding dong type AC 230 Volts single pole complete all as specified and directed

Exhaust fan, metallic body, AC, SP 230/240V, 300mm sweep with louver, 1400 RPM complete with accessories complete provisioning of three core flexible copper cord of size 23/0.0076 of required length from connector to fan for connection, complete all as specified and as directed.

Exhaust fan, polycarbonate body, AC, SP 230/240V, 250mm sweep with louver, 1400 RPM complete with accessories complete provisioning of three core flexible copper cord of size 23/0.0076 of required length from connector to fan for connection, complete all as specified and as directed.

Electronic fan regulator stepped type with five steps 240 volts 100 watt suitable for 1200mm / 1400mm sweep AC ceiling fan, complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.

LED Lamp, retrofit type with maximum wattage 7 Watts (Lumen Output not less than 700 lumens) with B-22 holder base with thermal conductive engineering plastic white colour housing and aluninium heat sink with specially designed fins clear/cool white, power factor more than 0.9, with surge protection device minimum 2KV, color temperature not less than 6000K, CRI more than 80, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, glarefree, 0 UV radiation long life burning hours 50000 hours complete all as specified. Note : The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from (the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

Tube light fitting, batten type suitable for and including LED 20 tube Rod 4' long with decorative colour in aluminum housing and integrated electronic driver and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed.

Tube light fitting, batten type suitable for and including LED 10 tube Rod 2' long with decorative colour in aluminum housing and integrated electronic driver and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed.

Bulk head luminaries energy saving, surface mounted, decorative bulk head back-lit LED luminaries complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed.

Distribution Board iron clad TPN DB, double door with IP-43, IK-09 protection, Four Way, Vertical, suitable MCCB FP 415 Volts 125 Amps rating as incommer and MCB as outgoing complete with appropriate size copper busbar including cutting chases in walls for fixing the DB and making good disturbed surfaces of walls, complete all as specified and as directed. Note : MCBs / MCCBs shall be measured and paid separately under the respective item.

MCCB TPN 415 Volts 100 Amps rating, 25 KA rupturing capacity with adjustable Thermal Magnetic trip release, complete all as specified and as directed.

Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way including taking down and making good disturbed surfaces of walls, complete all as specified and as directed.

Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way including taking down and making good disturbed surfaces of walls, complete all as specified and as directed.

MCB SP 6 to 32 Amp 10 KA, 'C' curve, complete all as specified and as directed.

MCB SP 40 Amp 10 KA, 'C' curve, complete all as specified and as directed.

MCB SPN 40 Amp 10 KA, 'C' curve, complete all as specified and as directed.

Sub main wiring with two single core PVC insulated multistrandred un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit and accessories) with continuous PVC insulated multistrandred unsheathed FRLS cable earth wire of 6.0 Sqmm dia including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Three runs of 6.0 Sqmm wire and one run of PVC conduit shall be considered as one unit length.

Sub main wiring with two single core PVC insulated multistrandred un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit and accessories) with continuous PVC insulated multistrandred unsheathed FRLS cable earth wire of 4.0 Sqmm dia including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Three runs of 4.0 Sqmm wire and one run of PVC conduit shall be considered as one unit length.

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 95 Sqmm 3.5 core including taking down/up unserviceable cable and making good disturbed surfaces, complete all as specified and directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 70 Sqmm 3.5 core including taking down/up unserviceable cable and making good disturbed surfaces, complete all as specified and directed.

Sand cushioning to under ground cable, laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete punned to 18cm, complete all as specified and directed. Note : Punned thickness of sand will be measured and paid.

Brick well burnt locally available sub-class 'B' laid over sand cushioning for mechanical cable protection in trenches with width of brick perpendicular to the length of cable, complete all as specified and as directed.

Steel pipe galvanised light grade, 100 mm bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable including GI clamps with bolts nuts and washers complete all as specified and directed.

Plain Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

PARAS RAM ASGOTRA AND SONS

VISHWA MITTAR PACHYALA

RANBIR ENTERPRISES

DAVINDER SINGH

SHIVAE CONSTRUCTION

KARAN TRADERS

Bidder Name

VISHWA MITTAR PACHYALA

KARAN TRADERS

ANIKET TRADERS

SHIVAE CONSTRUCTION

PARAS RAM ASGOTRA AND SONS

RANBIR ENTERPRISES

DAVINDER SINGH