PROVN OF BOUNDARY WALL (300 M) FOR RWA UNDER AGE B/R-I AT GE JHANSI

Amount

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m avg depth for foundation n.exc. 10 sqm on plan and getting out in soft/loose soil from sewage line etc, all as specified and directed.

Excavation over area not exceeding 1.5 M in depth and getting out in any type of soil complete all as specified and directed.

Excavation over area exc. 1.5m but not exceeding 3.0 M in depth and getting out in any type of soil complete all as specified and directed.

M&L Hard core Broken stone or boulders of Gauge n.exc63mm deposited spread and levelled in layers n.exc 15cmth watered and rammed complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M/L cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) in walls or retaining walls,any thickness, size or shape including pilasters, buttressescolumns,pillars,boundary pillars and posts (including caps andbases), complete all as specified and directed.

M&L for PCC Type B-0, 1:2:4 (12.5 mm Stone Aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, kerb stop rounded or chamfered in edges complete all as specified and directed.

S&F joist, channel, angle or tee section fixed independently without connecting plates etc. also fastening and fixing complete confirming to Fe-410-W (Gde E-250) Quality-A, complete all as specified and directed.

S&F galvanised, 2 strands, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

M&L 20mm thick rendering in CM(1:4) on wall surface on fair faces of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of cement base paint complete all as specified and directed.

M&L for RCC M-25 (design mix) (using 20mm gradded stone agg)as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and directed.

M&L for RCC M-25 (design mix) (using 20mm gradded stone agg)as in column, llar etc complete all as specified and directed.

Form work to sides of concrete foundation, footing, bases of columns, raft and raft beams sides and soffits of foundation and plinth beams; and similar work vertical or to batter rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work vertical or to batter rough finished surfaces of concrete complete all as specified and directed.

M&L for mild steel bars TMT bars 10mm dia and over, cut to length bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or sequiring with clips complete all as specified and directed.

M&L for mild steel bars round bars 10mm dia and over, cut to length bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or sequiring with clips, confirming to IS Fe-410-W (Gde.E-250) Quality-A or Fe-290(Gde-E-165) complete all as specified and directed.

All as per Ser item No 21 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M & L for machine cut granite (of any type) tiles 20mm thick, in vertical surface, bedded and jointed in counter with gray cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding, polishing and making hole in platform for gas pipe complete all as specified and as directed.

Demolition of brick work or stone boulder masonry built in cement mortar or lime mortar including all quoins arches ,pillars etc complete all as specified and directed

Dismantling for Stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry and pointed in any mortar, complete all as specified and directed.

M/s Jagdish Chandra Arora (BID ID -3133590)

Shri Tirupati Associates (BID ID -3132907)

ADARSH ENTERPRISES (BID ID -3133361)

M/S Kumar Contractors (BID ID -3132419)

M/S Kesav Dev Agarwal (BID ID -3132505)

Khushi Muskan Engineer & Developer (BID ID -3131074)

M/S Chadha Brothers (BID ID -3128745)

Yashoghan Construction (BID ID -3133667)

Ms Prakash Raikwar Traders Co. (BID ID -3134141)

MAHTAB ALAM (BID ID -3133798)