SPECIAL REPAIRS TO BLDG NO. T-19 AND P-38 AT LGJ MIL STN

Amount

B/R portion Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for 75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub-base complete all as specified and directed by Engr-in-charge.

Taking down cement or cement lime plaster of any description from brick or brick walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut Kota stone slab flooring 20-25 mm thick (minimum size 55cm x 55cm) laid over and including 15 mm thick screed base in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed by Engineer-in-Charge.

M&L for Kota stone slab 15-20mm thick in riser of steps, skirting , dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified & directed by Engineer-in-Charge.

M&Lfor marble tiles 20 mm thick machine cut Makrana white as in strip in floor over cement screed base, laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and directed by Engineer-in-Charge.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete and new work built in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for joint free glazed ceramic coloured tiles of size 350 X 250 X 7 mm / 450 x 350 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge.

M&L for brickwork with sub class 'B' bricks, old size bricks, straight or curved on plan exc. 6 m mean radius built in cm 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L formwork to sides and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, etc. also splays between floors and beams, etc. rough finish surface of concrete flat complete all as specified and directed by Engineer-in-Charge.

M&L for RCC 1:2:4, type B-1(volumatric mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelve and the like complete all as specified and directed by Engineer-in-Charge.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed by Engineer-in-Charge.

,---ditto--- All as per serial item No 13 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-Charge.

M&L for factory made steel windows conforming to IS-1038 with side hung shutters including box type hinges with 02 Nos MS 100mm size barrel tower bolt for each leaf and Z section steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

M&L for factory made steel windows conforming to IS-1038 with side hung shutters including box type hinges with 02 Nos MS 100mm size barrel tower bolt for each leaf and Z section handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

M&L for Framed work as in doors or gates of hollow section (Square/rectangle) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including hold fast, locking arrangement incl wheel track and sliding door bolt as required and hanging also fastening and fixing complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as specified & directed by Engineer-in- charge.

M&L for preparation of new plastered or pointed surface of walls and applying two coats of cement base paint complete all as specified & directed by Engr-in-charge.

M&L for complete removal of existing treatment and two coats of oil bound distemper over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new steel surfaces over 10cm in width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

S&F Sink mixer with regular spout (W/M) , brass (cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for sink, screwed down for iron pipe 15mm bore including taking down old valve any type complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of valve shall be as given in SSR or in relevant IS. (Model No : Cat No 7355, Make-Prayag and equivalent)

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed by Engineer-in-Charge. Make : Blue Star, Jayana and its equivalent

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L preparing newly plastered or pointed surface of wall and applying three coats of white wash complete all as specified & directed by Engineer-in- charge

Taking down shutters of any description exc 1 Sq.m and n.exc 2 Sqm each and refixing in same opening complete all as specified and directed by Engineer-in-Charge.

M&L for 3 coats of white wash on newly / old plastered surfaces on ceiling incl preparation etc.complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of cement base paint on newly / old plastered surfaces of wall incl preparation etc. complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engineer-in-Charge.

M&L for rendering, 10mm thick on brick work or concrete surfaces in cement mortar 1:4 on wall finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering, 10 mm thick on brick work or concrete surfaces in cement mortar 1:4 on ceiling finished even and fair complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of oil bound distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces all as directed.

M&L for broken brick boulder hard core of gauge, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed by Engineer-in-Charge.

M&L continous brick edging with fly ash bricks old size bricks, with width equal to the width of the brick liad dry on end vertically complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Supply only integrated water proofing compound complete all as directed by Engr-in-charge. Make:- Dr Fixit/Fosroc/BASF/STP

Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames exc 1.5 sq. m but n.exc 4.0 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.

S&F powder coated aluminium frame/shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO

S&F Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing exc 0.55 Kg/m (1.50 to1.80mm th) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No) hinges type B-21 100 mm long (2 Nos) suitable handle (01 No) in each window shutterand necessary accessary as required complete all as specified and directected by Engr-in-Charge. Note : Glass will measured and paid separately. Make of Al Section : Jindal / Hindalco / NALCO

S&F Neoprene / EPDM rubber gasket all as specified and directed by Engineer-in-Charge. Note : taken for other other than door/window shutter if reqd.

M&L 4.8 mm thick sheet glass, ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engineer-in-Charge.

M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.

Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled doorshutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.

S&F 100 mm long butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anosied and fixed type B-21 complete all as specified and directed by Engineer-in-Charge.

S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and directed by Engineer-in-Charge.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed by Engineer-in-Charge.

E/M Portion Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and directed by Engineer-in-Charge.

Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for concealed point wiring with two single core PVC insulated, unsheathed multistranded copper conductor cable of size 1.5 Sqmm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 Sqmm (FRLS) including MS shunk sheet metal box with 3 mm thick hylam sheet top cover of required size for mounting switches, sockets etc complete for One Light point / fan controlled by one, one way switch complete all as specified and directed by Engineer-in-Charge Note - Quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.

,--ditto--- all as per Serial item no 60 above, but for one 3 pin switch socket outlet, 5 Amp on the same boad with other switches complete all as specified and directed by Engineer-in-Charge.

,--ditto--- all as per Serial item no 60 above, but for one 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge.

,---ditto--- All as per serial item No 60 above but wiring with 4 Sqmm multistranded cable and earth wire with copper conductor of size 4 Sqmm for 15 Amps power point complete all as specified and directed by Engineer-in-Charge.

,---ditto--- All as per serial item No 60 above but wiring with 2.5 Sqmm multistranded cable and earth wire with copper conductor of size 2.5 Sqmm for 2 in one 5 pin 15 Amp socket outlet on independent board complete all as specified and directed by Engineer-in-Charge.

Supply and fixing piano switch flush button single pole one way 5 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and fixing piano socket 2 in 1, 2/3 pin 6 Amp flush type 250 Volts AC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing piano socket 2 in 1, 3 pin 5 Amp and 15 amp flush type 240 Volts AC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing piano switch 15 Amp flush type 240 Volts AC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting 1 x 20 W, 230 Volts integral sleek polycarbonate LED Channel (composite type) with white acrylic cover includeing making connection complete all as specified and directed by Engineer-in-Charge.

S&F lamp holder insulated body with back plate for anglwe /batten fitting with LED of 9 watt complete all as specified and directed by Engineer in charge.

S&F ceiling rose surface bakelite two or three terminals / plate 5 Amps complete all as specified and directed by Engineer in charge.

S&F sheet metal enclosure DB single pole and neutral for 240 Volt 8 way with 200 Amps rated busbar flush/surface mounting double door including wooden board complete all as specified and directed by Engineer-in-Charge.

S&F MCB single pole 240 volt 6-32 Amp 10 KA complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SPN 240 Volt 32 Amps 10 KA complete all as specified and directed by Engineer-in-Charge.

S&F sheet metal including single pole and neutral with 02 Pin and earth plug and socket complete with 01 single pole 20 Amp 240 volts, MCB complete including necessary fixing arrangement and all incoming and outgoing electrical connection complete all as specified and as directed by Engineer-in-charge.

S&F exhaust fan 300 mm sweep working on 230V AC supply complete with louvers complete all as specified and as directed by Engineer-in-charge.

S&F LED light fitting 1 X 18 W, 230 V integral sleek polycarbonate LED channel with white acrylic cover including making connection complete all as specified and directed by Engineer-in-charge.

S&F LED decorative wall bracket light with B22D lamp holder including 9 watt LED lamp all as specified and directed by Engineer in charge.

Supply and fixing fan regulator 100 watts electronic socket type complete all as specified and directed by Engineer-in-Charge. Make : Legrand/Anchor/Usha.

Supply and fixing factory made, sheet distribution boards, double door, protection class IP-43 suitable for mounting MCB/MCCB, with min 200 Amps, copper bus bar, working on 240 Volt AC, SP & N 8 Ways complete all as specified and directed by Engineer-in-Charge. Make : Legrand/ ABB/ Seimens

S&F in DBs (catered above) MCBs 9KA confirm to rupturing capacity of the SP & N 40 Amp rating complete all as specified and directed by Engineer in Charge. Make : Legrand/ABB/Seimens.

M & L for Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6 mm buried directly in ground vertically to a depth not less than 2.25 mtr below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts, check nuts and washers complete including earthing pit, chemical compound, earthing lead up to 7.5 mtr, 20 mm dia medium grade GI watering pipe, GI protection pipe 40mm dia eath pit in PCC 1:2:4 type B-1 using 20 mm graded stone agggragate RCC pit cover including earth work complete all as shown Electrical Plate No - 5 of SSR-2009 (Part-I). Note : The unit rate shall include for excavation & earth work in any type of soil/strata, PCC 1:2:4 type B-I for pit & RCC 1:2:4 type B-I for cover with 8mm dia CTD Bar @150mm C/C both way, funnel with watering pipe 20 mm dia medium grade, 15mm dia light grade GI pipe up to 7.5 mtr long wiremesh complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED building security light fitting 25 Watt with epoxy powder coated sheet aluminium housing, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover and accessories complete incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer after taking down old u/s one complete all as specified and directed by Engineer-in-Charge. Make of fitting : Bajaj Cat Pt No BRLEP 25 W LED or equivallent in Crompton/Havells.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

J K ENGINEERS

AJAY CONSTRUCTION COMPANY

GOYAL ENTERPRISES