8471REPAIR REPLACEMENT OF FALSE CEILING PANELING AND CERTAIN CARPENTER WORKS AND OTHER CONNECTED WORKS RELATED TO WARDS AND ANCILLARIES UNDER AGE B R III S OF GE (SOUTH) PUNE

Amount

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets OF any thickness, including cover fillets, complete all as specified and directed.

S&F anodised powder coated aluminium snap grid frame work for false ceiling with hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and as directed.

M&L for 8mm thick exposed metal frame ceiling with calcium silicate tiles of siliceous and calcareous material reinforced with cellulose fibre for fixing in 595 mm x 595 mm grid (Frame work for ceiling shall be measured and paid separately), complete all as specified and as directed.

M&L for GI powder coated grid false ceiling frame work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling by using 2 mm dia G.I. suspension wires spaced at 1200 mm on main runners including making niches for fans / light etc, including taking down boarding / ceiling of any description, fixed in any position etc with nails, complete all as specified and directed

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately), complete all as specified and as directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer’s instructions, complete all as specified and as directed.

M&l for wall paneling with 12 mm thick BWR plywood, one side laminated with 1mm thick decorative laminate including wooden frame work of 2nd class HW battens of size 125mm x 40mm fixed with screws, complete all as specified and as directed.

Taking down chowkats of frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each including hold fasts and removing the same from site, complete all as specified and as directed.

Taking down chowkats of frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm and n. exc. 4.00 sqm each including hold fasts and removing the same from site, complete all as specified and as directed.

Taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each, removing to or from store, complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) three track sliding window with two or more shutter with 5mm thick tinted glass one shutter including with stainless steel wire cloth 0.36mm nominal dia and 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make as mentioned here-in-after, complete all as specified and as directed by Engr-in-Charge:- (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F powder coated aluminium (minimum thickness of powder coating 50 micron) ventilators / louvers using 4mm thick x 10cm wide frosted glass strips and by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make as mentioned here-in-after including with rubber beading etc, complete all as specified and as directed. (a) SP : 20048 (b) Glazing clips : 19352

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) single leaf door on pivots including hydraulic door closer (Aluminium Extruded Section), door lock, handles 5mm thick plain glass in top and 12mm thick pre-laminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using powder coated sections as given in 'JINDAL' Catalogue or equivalent make as mentioned here-in-after, complete all as directed by Engineer-in-Charge. (a) Rectangular tube - 14005 (b) Shutter vertical - 18501 (c) Shutter top rail - 19503 (d) Shutter middle rail - 20060 (e) Shutter bottom rail - 19511 (f) Glazing clips - 19352.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) doule leaf door on pivots including hydraulic door closer (Aluminium Extruded Section), door lock, handles 5mm thick plain glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using powder coated sections as given in 'JINDAL' Catalogue or equivalent make as mentioned here-in-after, complete all as directed by Engineer-in-Charge. (a) Rectangular tube - 14005 (b) Shutter vertical - 18501 (c) Shutter top rail - 19503 (d) Shutter middle rail - 20060 (e) Shutter bottom rail - 19511 (f) Glazing clips - 19352.

S&F aluminium partition with 12mm thick prelaminated particle board of choice colour in bottom panel and 5mm thick plain glass in top panel fixed with clips aluminium beads, rubber gaskets etc, centre to centre distance of vertical member shall n. exc 1mtr and horizontal member shall n. exc 1.10mtr using following aluminium powder coated section as specified in ‘JINDAL’ Catalogue or equivalent make as mentioned here-in-after, complete as directed. (a) SP - 20048 (b) DP - 20047 (c) Glazing clips - 19352.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) sliding door shutter including door lock, handles, 5mm thick plain glass in top and 12mm thick pre-laminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using powder coated sections as given in 'JINDAL' Catalogue or equivalent make as mentioned here-in-after and fixed on top hung including roller etc complete all as directed by Engineer-in-Charge. (a) Rectangular tube - 14005 (b) Vertical Rail - 19502 (c) Top rail - 19503 (d) Middle rail - 20060 (e) Bottom rail - 19501 (f) Glazing clips - 19352.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips etc., complete all as specified and directed.

S&F 5 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm in each pane, complete all as specified and directed.

S&F 12 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required as in glazing structural, complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet with single side prelam PVC sheet used in stead of plain colour PVC sheet & edgs will be painted to match with prelam sheet. reinforced with 19x19mm MS square tube and 1.2mm wall thickness, complete all as specified and as directed.

S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F of 100mm long stainless steel butt hinges, medium weight and fixed, complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed.

S&F of powder coated 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F of powder coated 150mm size aluminium handles, fabricated type, anodised and fixed, complete all as specified and directed.

M & L 18/19 mm thick per-laminated particle board, exterior graded, pre-laminated both side with decorative choice lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cabinets/ Pelmets including 6mm thick, 1st class HW (Teak wood) beading all around fixed in repair, complete all as specified and directed.

M&L plain fillets 2nd class hardwood. square, rectangular or triangular in section, exc. 3.0 & n.exc. 6.0 Sqcm clean sawn, secured with nails or brads, complete all as specified and directed.

S & F in repair Continuous (piano) hinges 30 mm width of flap, mild steel, bright finish or electro galvanised, complete all as specified and directed.

S&F in repair 100mm size cupboard handles fixed with nuts screws and washer of brass polished, complete all as specified and directed.

S & F in repair 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw, complete all as specified and directed.

S&F in repair of brass Locks 4 levers suitable cupboard, grade I, size 50mm, complete all as specified and directed.

S&F in repair of 150mm Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S&F in repair of powder coated 300mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F in repair of powder coated 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F in repair of powder coated 150mm size aluminium handles, fabricated type, anodised and fixed, complete all as specified and directed.

S&F in repairs of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F in repair of door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed.

S&F in repair powder coated 100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified & directed.

S&F in repair powder coated 200mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F in repair powder coated 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair powder coated aluminium (minimum thickness of powder coating 50 micron) 150mm size aluminium handles, fabricated type, anodised and fixed complete all as specified and as directed.

S&F in repair 150mm Floor door stopper of aluminium alloy body and tongue, powder coated with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repair 150mm Floor door stopper of brass body CP and hard drawn steel spring with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F in repair of horizontal Venetian Blinds of powder coated Aluminum strips or equivalent of approved shade including necessary accessories, complete all as specified and directed.

S&F in repair of cubicle Curtain Track made from heavy Duty Aluminium cubicle track size 20mm wide x 30mm high, made of aluminium natural anodized to 15 microns complete with continuous PVC liner, nylon gliders and hooks, plastic end cap, connecting bridge, overlapping joint connector, wall brackets with matching screws to make up cubicle height to 2100mm clearance from floor level at 1000mm spacing and securely fixed to above slab all strictly in accordance with the manufacturer's instruction, complete all as specified and directed.

M&L for 3mm thick Aluminium Composite Panel (ACP) exterior grade (skin thickness 0.25mm) including aluminium anodised frame work of AA 300/5000 series with one core of material of virgin LDPE and coating of kynar 500 resin based PVDF coating (metallic colour) with joint filling silicon weather proofing any colour, complete all as specified and directed.

M&L in repair of 12mm thick Perforated fiber board/ tiles for insulation and acoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for mild steel miscellaneous work as in framed work such as barred iron doors, gate etc including pin type hinges, handmade sliding bolt etc with and including hanging, complete all as specified & as directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in post, main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates, complete all as specified & as directed.

Dismantling of plain or corrugated steel sheeting in roof covering, complete all as specified & as directed.

S&F roof sheeting pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F roof sheeting pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint 1st quality over a coat of red oxide primer on steel surfaces exc.10cm width or girth complete all as specified and as directed.

S&F in repair aluminium powder coated fancy type curtain rod 25mm bore, medium weight, complete all as specified and directed.

S&F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM 1:6, on brick/ PCC block/AAC block walling, finished even & smooth with a thin layer of sagol finish including taking down plaster and incl two coats of plastic emulsion paints after preparation of new plastered surface and 2mm thick wall care putty complete all as specified and directed

Dismantling stone slabs / tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, apron etc complete all as specified and directed.

M&L for 20mm thick polished granite (of any type) machine cut, bedded and set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over and including 15mm thick screed bed in CM 1:6 in flooring, complete all as specified and as directed

M&L Machine cut Kota stone flooring 20 to 25 mm thick laid, set & jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor, treads etc including rubbing and mirror polishing laid over and including screed bed 20mm thick in CM 1:4, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & as directed.

M&L for non - skid Ceramic colored tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 600X 300X 7mm thick / 450x300x7mm thick / 300X200X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4 including triangular filleting in CM 1:3, complete all as specified and directed.

M&L for french polishing on old surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with one or more coats complete all as specified and directed.

M&L for Mirror polishing on existing marble / granite / Kota stone/ stone work where ever required to give high glossy finish complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed.

MONA ASSOCIATES

Gauri Associates

Santosh Pandurang Pise

TULSAYA CONSTRUCTION

Anand Trading Co

Suma Construction

M/s.BAJRANG CONSTRUCTION

ANIL CONSTRUCTION CO.