Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.4 LAccepted-AOC PO CHANDL PS BISHNUPUR DIST SOUTH 24 PGS PIN 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L1 | Accepted-AOC Being lowest bidder and reasonable | |
| 2 | L2₹53.0 L+₹3.0 L (6.11%)Rejected-Finance TIORKHALI MAHESHGANJ NADIA | NADIA | NADIA | WEST BENGAL | 790804 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹53.2 L+₹3.3 L (6.62%)Rejected-Finance P 45 KHIRODE VIDYA BINOD AVENUE KOLKATA 700003 | KOLKATA | WEST BENGAL | 700003 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹53.6 L+₹3.7 L (7.34%)Rejected-Finance 8 28 BIJOYGARH P O JADAVPUR KOLKATA 700 032 | KOLKATA | WEST BENGAL | 700032 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹53.9 L+₹4.0 L (7.96%)Rejected-Finance BHANGARMATH THAKURANI CHAWK PO SAMABYPALLY BALLY HOWRAH 711 205 WEST BENGAL | HOWRAH | WEST BENGAL | 711205 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
26 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIR/MAINT OF MAP OR AND JCOS MARRIED ACCN OUTSIDE FORT WILLIAM UNDER GE(FW) KOLKATA
2022_MES_563271_2
8943/FW/E8
Open Tender
Civil Works
Item Rate
240 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹92,000
17 Jan 2023
19 Dec 2022
27 Dec 2022
19 Dec 2022
26 Dec 2022
19 Dec 2022
Amount
Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.
Taking down unserviceable steel windows/ ventilators, of any size incl grill/guard bars and removing from site complete all as specified and directed.
Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.
Taking down shutters any description exc 1.0 but not exc. 2.0 sqm each and refixing in the same opening after necessary repair like easing etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
M&L for applying one coat of acrylic distemper with rollers to old decorated surfaces of wall including preparation of surface complete all as specified and directed.
M&L for applying one coat of acrylic distemper with rollers to old decorated surfaces of ceiling including preparation of surface complete all as specified and directed.
M&L for providing and applying 2mm thick plaster of paries over plastered surface to prepare the surface even and smooth, complete all as specified and as directed.
M&L for providing and applying 1mm thick plaster of paries over plastered surface to prepare the surface even and smooth, complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description not exceeding 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for preparation of old decorated wall surfaces and applying one coat of cement base paint with brush complete all as specified and directed.
M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 2 mm thick exterior wall putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having 7"- 9" dia (as required) including cleaning, watering to make the surface clean and free from dust, for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by using high pressure jet washer including cleaning the surface by scrapping as required using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc., to make the surface clean and free from dust, for upto 4 storey height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for applying 2mm thick wall care putty (in two layers) on old cleaned surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for brick work using old size fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 including necessary scaffolding complete all as specified and directed.
M&L for brick work using old size fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 complete all as specified and directed.
S&F in repair 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors incl necessary scaffolding complete all as specified and directed.
All as per item No 26 here-in-before but 20 mm bore
All as per item No 26 here-in-before but 25 mm bore
Taking down and re-fixing old steel tubing 15mm bore and connection in new or old position(wall, ceiling, floor etc.) after properly cleaning incl necessary scaffolding complete all as specified and directed.
All as per item No 29 here-in-before but 20 mm bore
All as per item No 29 here-in-before but 25 mm bore
S&F in repair Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : ESS ESS, Cat No: RO-101 / PRAYAG, Cat No: 6702 / Essco, Cat No: SQT-507KN / SOMANY, Model: ETHER)
S&F in repair swan neck pillar cock 15mm dia chromium plated cast copper alloy with round spout left hand knob operating screwed for iron pipe etc complete all as directed (MAKE : ESSCO, Cat No : MQT-510AKN / ESS ESS, Cat No: T-113B / PRAYAG, Cat No: 6414 / SOMANY, Model: ETHER)
S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: RB-103 / PRAYAG, Cat No: 6706 / Essco, Cat No: SQT-512KN / / /SOMANY, Model: ETHER)
S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: RO-103A / PRAYAG, Cat No: 6712 / Essco, Cat No: SQT-512ANKN /SOMANY, Model: ETHER)
S&F in repair chromium plated brass over head shower rose with arm, with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : Essco, Cat No: ALE-536A & EOS-542N / ESS ESS, Cat No: SA-101 & OH-202 / PRAYAG, Cat No: BS-73 / SOMANY, Model: ETHER)
S&F in repair 15mm bore chromium plated central hole basin mixer without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : Ess Ess, Cat No: RO-118 / PRAYAG, Cat No: 6750 / Essco, Cat No: SQT-516KN /SOMANY, Model: ETHER)
S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : Ess Ess, Cat No: RO-332 & E-2211 / PRAYAG, Cat No: 6718 / / Essco, Cat No: SQT-514EKN /SOMANY, Model: ETHER)
S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make :ESS ESS, Cat No: RO-112 / PRAYAG, Cat No: 6710 / ESSCO, Cat No: SQT-526NKN / SOMANY, Model: ETHER)
S&F in repair PTMT Angular stop cock, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : PRAYAG, Cat No: 144-E or any other make as approved by GE)
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.0 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : ESS ESS, Cat No: C-232X / PRAYAG, Cat No: 451 / ESSCO, Cat No: ALE-IVY-583 / SOMANY, Model: ETHER)
S&F in repairs, Tubular towel rail, 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : ESS ESS, Cat No : AC-701 / Essco, Cat No : AEC-1111N / PRAYAG, Cat No: BA-40 / SOMANY, Model: ETHER)
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete including taking down existing sink complete all as specified and directed. (MAKE : CERA, Cat No: B4512201 /PRAYAG, Cat No. 1339D / PARRYWARE, Cat No: C855099 or equivalent model in NIRALI / ANJALI / JAYNA) (NOTE: Waste coupling and Waste pipe shall be measured and paid separately)
Repair to CP brass item of Bib tap, Stop cock, Pillar tap, angular cock, shower rose, hand shower, health faucet etc of 15mm size including replacement of washer/spindle if required in day to day maintenance complete all as specified and directed.
S&F in repair CP grating 100mm size fixed with white cement complete all as directed. (Make : PRAYAG, Cat No : FT-62 or equivalent make as approved by GE)
S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )
S&F in repairs Low density polythelene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 / ESS ESS, Cat No: B2CH118 or equivalent model in SHAKTI / JEXON)
-ditto- all as per Item No. 70 here in before but 600mm long. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON / ESS ESS)
S&F in repair 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins, sinks etc complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as approved by GE)
S&F in repair 32 mm bore PVC collapsible waste pipe, 800 mm long complete all as specified and directed. (Make: PRAYAG, Cat No: 3272 or equivalent make as approved by GE)
S&F in repair strainer for kitchen sinks, round, complete all as specified and directed. (Make: PRAYAG, Cat No: SA-03 or equivalent item as approved by GE)
S&F in repair chromium plated brass waste coupling, 32 mm size, full threaded complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / ESS ESS, Cat No: C-230C / ESSCO, Cat No: ALE-544NT)
S&F in repair 32mm CP Waste coupling (half threaded) complete all as specified and directed. (MAKE : PRAYAG, Cat No: BEA-10 / ESS ESS, Cat No: C-230H / ESSCO, Cat No: ALE-543HT)
S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 / PRAYAG, Cat No: 725 or equivalent model in JAQUAR / CERA / HINDWARE)
S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: ESS ESS, Cat No: C-231C / PRAYAG, Cat No: BEA-23 / ESSCO, Cat No: ALE-773ML190x125)
S&F in repair 10 ltrs capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)
Repair only to PVC flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.
Taking down WHB, any type or size and re-fixing in existing or new location with new brackets complete all as specified and directed.
S&F in repair Vitreous China Wash Hand Basin 630x450mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed. (MAKE : CERA, Cat No: S2040104 / HINDWARE, Cat No. 10001 or equivalent model in ASIAN PAINTS/PARRWARE) (NOTE: Waste coupling and Waste pipe shall be measured and paid separately)
S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : CERA, Cat No: S3010109 / HINDWARE, Cat No. 20042 /ASIAN PAINTS, Cat No: WM-32-X / PARRYWARE, Cat No: C0126)
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc including PVC seat cover complete all as specified and directed. (Make : Parryware, Model: Elite/CERA, Model: Conventional/Jaquar Model: Continental/HINDWARE, Model: Slick) (NOTE: Cost of seat cover, hinges etc shall be deemed to be included in the quoted rate)
S&F in repair 40 mm dia LDPE pipe with bends, etc fixed to walls, ceilings or floors including clamps complete all as specified and directed.
S&F in repair gun metal gate or globe valve, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe complete all as specified and directed.
All as per item No 64.00 above, but 25 mm bore gate valve
All as per item No 64.00 above, but 40 mm bore gate valve
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed.
M&L 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F factory made 35 mm thick 2nd class hard wood panelled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkhats complete all as specified and directed.
S&F factory made 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded for fixing wire mesh including one shop coat of priming, complete all as specified and directed. (NOTE : Sheet glass for glazing shall be measured and paid separately)
S&F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.50 Sqm in each pane complete all as specified and directed.
All as per item No 72.00 above, but 4 mm thick frosted glass
S&F in repair powder coated (medium thickness of powder coating 50 micron) aluminium frame for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F in repair powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type with sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable peg stays, hinges and handles- 02 Nos etc with 4mm thick tinted/frosted glass ordinary quality as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of sheet glass)
S&F in repair anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge.
S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth of 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F PVC solid door frame of size 50 x 47 mm made out of 5 mm thick prelaminated single side PVC sheet reinforced with MS square tube complete all as specified and as directed.
S&F 30 mm thick factory made both side prelaminated solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mm X 19mm for stiles, top and bottom rails, treated with a coat of metal primer, MS frame covered with heat moulded prelaminated PVC 'C' channel for stiles and both side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; stiles and rails feathered at edges, panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in frame complete all as specified and directed.
M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 100 mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.
S&F 75mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.
S&F 150 mm long aluminium anodised handles (cast type) ISI marked complete all as specified and directed.
S&F 125 mm long aluminium anodised handles (cast type) ISI marked complete all as specified and directed.
S&F 150 mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.
S&F 200 mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.
S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed.
All as per item No 88.00 above, but 300 mm sliding bolt fixed in repairs
M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete incl necessary scaffolding complete all as specified and directed.
M&L 10 mm thick rendering on ceiling surfaces in cement mortar 1:3, finishing even and smooth without using extra cement including necessary scaffolding complete all as a specified and as directed
M&L for providing 40 mm thick plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed.
M&L 18-20mm thick granite slab in window cills, cooking platform etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over screed bed 20mm thick in cement mortar 1:4 all as specified and as directed.
S&F join free ceramic coloured floor tiles (square/ rectangular), minimum 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.
All as per Item No 94.00 above, but in skirting fixed over and including 10 mm thick screed bed in cement mortar 1:3
S&F join free ceramic coloured floor tiles (square/ rectangular), minimum 7 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.
All as per Item No 96.00 above, but in skirting fixed over and including 10 mm thick screed bed in cement mortar 1:3
S&F glazed coloured ceramic tiles in vertical surface, as per approved design, size 300 X 450 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and incl 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 500 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed. (NOTE: GI long screw shall be measured and paid separately)
S&F in repair 20 mm bore Ball brass valves, high pressure, with HDPE float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-152 or equivalent model in JEXON / POLYTUF / SHAKTI)
S&F in repair PTMT Ball Valve 15mm dia, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed. (MAKE : PRAYAG, Cat No. 151 or equivalent model in JEXON / POLYTUF / SHAKTI)
Disconnecting exiting water storage Tank of capacity exceeding 250 litres but not exceeding 500 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writing MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.
M&L for uprooting of plants or vegetation growth from wall up to roof level, applying two coats of tartaric acid and repair to broken/chipped off plastered surfaces with cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instruction and sealed with 85/25 grade hot blown bitumen in patch not exc 2.0 sqm and removal of debris outside MOD land and disposed off complete all as specified and directed by Engineer -in charge.
M&L for cleaning of inaccessible areas of roof including parapet walls upto 0.50 metre height, removal of vegetation growth, including uprooting, if required and repair to broken/chipped off plastered surfaces with cement mortar 1:4, mixed with water proofing compound @ 200 ml per 50 kg bag of cement, finished fair and even including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid separately)
M&L for cleaning of outer surfaces of down take pipes, any type, treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 sqm) and making good with cement mortar 1:4 duly mixed with water proofing compound @ 200 ml per 50 kg bag of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid separately)
Providing and fixing double steel scaffolding system (cup lock type) on the exterior side of shaft portion (only) of building of any height including additional rows of scaffolding in stepped manner as per requirement of site, made with minimum 40mm dia M.S. Tube, placed 1.5 metre centre to centre(maximum), horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. Tube challis, M.S. Clamps and staircase system in the scaffolding for working platform etc and maintaining it in a serviceable condition for execution of work and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of GE. Notes:- (1) The elevational area of shaft portion of building (length/breadth of shaft X height of shaft) covered with scaffolding shall only be measured for payment purpose. (2) The payment shall be made for one time only for execution of all items of each face of shaft portion of building. (3) After completion of work all scaffolding materials shall be removed from building /structure by the contractor and the same shall be the property of the contractor and accordingly rate shall be quoted.
M&L for small repairs of hinges of doors and windows, adjusting sliding door bolts, tower bolts, repair of handles, mortice locks etc and similar works complete all as specified and directed.
S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
M&L in repair 19/20mm thick pre-laminated particle board as in cup board shutter double leaf one side decorative shade lamination and other side balancing white lamination. All edges properly sealed with 5mm thick 2nd class hardwood beading fixed with water resistant adhesive except rebate side which shall be of 25mm thick complete all as specified and directed.
S&F in repair drawer knobs 40 mm dia of brass polished fixed with nut screw and washer complete all as specified and directed.
S&F in repair for 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
SHEIKH ENTERPRISE
UNIVERSAL TRADING CENTRE
DEB AND COMPANY
dutta and dutta
MODERN AGENCY
M/S SRINIVASA CONSTRUCTION
MS HORIZEN
M A ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .