Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹105.9 CrAWARDED | ₹105.9 Cr | AWARDED |
Tender Value
₹101.1 Cr
EMD Value
₹1.0 Cr
Closing Date
5 May 2025, 9:30 pmClosed
Engineering Wing of Health and Family Welfare Department
Reconstruction of 550 Bedded Medical College Hospital Block- II Project in Ballari Taluk, Ballari District.
177817
EWHFWD/2025-26/BD/WORK_INDENT853
Open
Buildings
EWHFWD Chief Engineer Office Bengaluru
₹7,500
₹1.0 Cr
6 Apr 2025
6 Apr 2025
6 May 2025
21 Apr 2025
22 Apr 2025
CIVIL WORKS - UPTO PLINTH AND OTHER WORKS
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 124 (1 cement 2 coarse sand 4 graded stone aggregate) finished with a floating coat of neat ce...
Providing and injecting chemical emulsion for Preconstructional AntiTermite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine ag...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....
High Density polyethylene Membrane water proofing Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Pol...
polyurethane based water proofing for Retaining wall Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moistur...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Form Work and Centering
(Apendix Vol1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Foundation upto Plinth, All other types (3 percentage) (SR NO 2.2.5) ---- ETC AS PER THE DIRECTI...
Form Work and Centering
(Apendix Vol1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Columns/Shaft( Slip Centering) (70 percentage)(SR NO 2.4.4) ---- ETC AS PER THE DIRECTION OF...
Form Work and Centering
(Apendix Vol1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Earth Retaining Structures (10 percentage) (SR NO 2.3.3) ---- ETC AS PER THE DIRECTION OF ENGINE...
Form Work and Centering
(Apendix Vol1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Plinth Beams of Buildings (50 percentage)(2.3.3) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CH...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, ba...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Form Work and Centering
(Apendix Vol1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Earth retaining structures (10 percentage)(SR NO 2.2.3) ---- ETC AS PER THE DIRECTION OF ENGINEE...
Form Work and Centering
(Apendix Vol1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Roof Slab of Buildings (50percentage) Roof Slab Concrete Quantity (SR NO 2.2.3) ---- ETC AS PER ...
KSRB 126.1 Providing 20mm square M.S footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges,...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 124 (1 ce ment 2 coarse sand 4 graded stone aggregate 20 mm nominal ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 15 (1 cement 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 13 (1 ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied at 1.67L/10 m² over and including priming coat of exterior primer applied at 2.20 kg/10 m²) with paint...
Supplying,installing,testing and commisioning of "DP Holland make of Multi VFD Operated Hydropneumatic system with imported stsinless steel vertical multistage pumo model VCF15/5;5.5 Kw Having IE2 Cla...
Supplying,installing,testing and commisioning of pressure vessel 300 LTS of PN10 rating etc complete with all lead and lift as per detailed specification and directions of the Engineer in charge --...
Providing and fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc ...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Form Work and Centering (Apendix Vol1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Foundation upto Plinth (8percentage) a. Isolated Footing (SR NO 2.2.3) ---- ETC AS PER THE DIRECT...
Form Work and Centering (Apendix Vol1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Columns / Shaft (Slip Centering) (70 percentage) (SR NO 2.2.3) ---- ETC AS PER THE DIRECTION ...
Form Work and Centering (Apendix Vol1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Beams, Lintels and Troughs of Aqueducts (60 percentage) (SR NO 2.2.3) ---- ETC AS PER THE DIR...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. (...
Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as pe...
Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 N...
Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat moulde...
Providing and fixing of 3track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 14 (1 cement 4 fine sand) to brick masonry including rounding off corners...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Supply, erection, testing and commissioning of SBR method STP OF 200KLD including all work.
1)Fine Bar Screen SS, bar screen made by 20x6 flats of size 450x850 with clear opening of 5 mm, manually op...
Supply, erection, testing and commissioning of Effluent Treatment Plant 3 KLD including all work. ETP
1)Fine Bar ScreenSS, bar screen made by 20x6 flats of size 450x850 with clear opening of 5 mm, man...
Supply, erection, testing and commissioning of 250KLD Water treatment plant including all works etc 1) Filter feed Pumps,2) Pressure sand filter,3)Activated carbon Filter,4) Softner,5) Chlorinator ,6)...
Compacting Original Ground
Compacting original ground supporting embankment
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankmen...
Plant Mix Method
Construction of Granular Sub-Base of required grading as
per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with ...
Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....
Bituminous macadam Grading -II for traffic less than 20 MSA Providing and laying Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixe...
Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m 2 on the prepared bituminous surface cleaned ...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Shuttering (Apendix Vol1, Page No112) (Percentage on finished rate of concrete per cum) Cement Concrete Drain Walls RCC WALL ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing 12 mm cement plaster with cement mortar 16 (1 cement 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of mat...
Providing and laying 100mm thick precast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 at 6kg/m2, slabs jointed in CM 13 ...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 13 fixed and finsihed in line as per direction of Engineer in charge. (The cost of P...
Providing and laying Reinforced Cement Concrete pipe light duty
NP2 for culverts, roadway utilitiesand crossingsas per IS 4582003
in Single row including pointing ends and fixing collars with
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per ...
Providing and fixing bolts including nuts and washers complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the EngineerinCha...
Providing and fixing M.S. rivets of sizes in position including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the EngineerinCharge. ----...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08percentage and conforming to IS15622, of approved brand and ...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing and fixing 50 mm thick prefabricated walkable stainless steel panels ceiling The panel should have a composite construction of two skins, one side stainless steel 304 grade 0.8 mm thick and ...
Providing supply leading lifting and fixing in position of 50mm thk PPGI PUFF panels using required accessories like SDS screws , selicion sealant etc required, Panel Thickness 42 mm 150mm Metal facia...
Providing supply leading lifting and fixing in position of 0.47mm thk PPGI rigde below PUFF panels using required accessories like SDS screws , selicion sealant etc required etc complete with all lea...
Providing supply leading lifting and fixing in position of 50mm thk PPGI rigde above PUFF panels using required accessories like SDS screws , selicion sealant etc required etc complete with all lead ...
Providing supply leading lifting and fixing in position of 1.0mm thk GI sheet made gutter on both sides with required accessories like SDS screws , selicion sealant etc required etc complete with all...
The wall panels shall be made up of 0.5mm thick (TMT) PPGI ribbed sheet on both sides with a layer of rigid CFC free polyurethane foam of density 40kg plus or minus 2kg per cum as insulation in betwee...
Providing and fixing of 2.5 track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90 ltr/10 m² over an under coat of primer applied at 0.80 ltr/10 m² of approved brand and manufacture...
Providing and fixing in position copper plate as per design for expansion
joints. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and filling in position,blown bitumen in expansion joints ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS 1838, including cost of primer, sealing compound GradeA in expansion joints. ---- ETC AS PER THE DIRECTION ...
Providing and fixing sheet covering over expansion joints with iron screws as per design. Aluminium fluted strips 3.15 mm thick.150 mm wide ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineerinc...
Supplying, filling, spreading andleveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads and lifts, all co...
Supplying, filling, spreading andleveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads and lifts, all complete as per direction of ...
Gravel packing in tube well construction in accordance with IS 4097, including providing gravel fine/ medium/ coarse, in required grading and sizes as per actual requirement, all complete as per d...
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conformi...
Development of tube well in accordance with IS 2800 (part I) and IS 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capaci...
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of 200 mm dia ----...
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS2800 (part I). 200 mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing RCC Rings of 1500 mm dia and 600mm depth all as per requirement and direction of Engineerincharge. RCC ring ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing RCC perforated slab of 1500 mm dia and 150mm thick all as per requirement and direction of Engineerincharge. RCC top slab ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
CIVIL WORKS - ABOVE PLINTH
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 ...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Columns / Shaft (Slip Centering) (70 percentage) (Column Basement Floor + Ground Floor) (SR...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Columns / Shaft (Slip Centering) (70 percentage) (Column First Floor) (SR NO 2.5.3) ---- ET...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Columns / Shaft (Slip Centering) (70 percentage) (Column Second Floor) (SR NO 2.5.3) ---- E...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Columns / Shaft (Slip Centering) (70 percentage) (Column Third Floor) (SR NO 2.5.3) ---- ET...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Columns / Shaft (Slip Centering) (70 percentage) (Column Fourth Floor) (SR NO 2.5.3) ---- E...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Columns / Shaft (Slip Centering) (70 percentage) (Column Fifth Floor) (SR NO 2.5.3) ---- ET...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Columns / Shaft (Slip Centering) (70 percentage) (Column Terrace Floor) (SR NO 2.5.3) ---- ...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Earth Retaining Structures (10 percentage) (Lift wall Basement Floor + Ground Floor) (SR NO 2.5...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Earth Retaining Structures (10 percentage) (Lift wall First Floor) (SR NO 2.5.3) ---- ETC AS PE...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Earth Retaining Structures (10 percentage) (Lift wall Second Floor) (SR NO 2.5.3) ---- ETC AS P...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Earth Retaining Structures (10 percentage) (Lift wall Third Floor) (SR NO 2.5.3) ---- ETC AS PE...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Earth Retaining Structures (10 percentage) (Lift wall Fourth Floor) (SR NO 2.5.3) ---- ETC AS P...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Earth Retaining Structures (10 percentage) (Lift wall Fifth Floor) (SR NO 2.5.3) ---- ETC AS PE...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Earth Retaining Structures (10 percentage) (Lift wall Terrace Floor) (SR NO 2.5.3) ---- ETC AS ...
Form Work and Centering
(Appendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Beams, Lintels and Troughs of Aqueducts(60 percentage) (Beam, Basement Floor + GROUND FLOOR...
Form Work and Centering
(Appendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Beams, Lintels and Troughs of Aqueducts(60 percentage) (Beam First Floor) (SR NO 2.5.3) ---...
Form Work and Centering
(Appendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Beams, Lintels and Troughs of Aqueducts(60 percentage) (Beam Second Floor) (SR NO 2.5.3) --...
Form Work and Centering
(Appendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Beams, Lintels and Troughs of Aqueducts(60 percentage) (Beam Third Floor) (SR NO 2.5.3) ---...
Form Work and Centering
(Appendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) RCC Beams, Lintels and Troughs of Aqueducts(60 percentage) (Beam Fourth Floor) (SR NO 2.5.3) -...
Form Work and Centering
(Appendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Beams, Lintels and Troughs of Aqueducts(60 percentage) (Beam Fifth Floor) (SR NO 2.5.3) ---...
Form Work and Centering
(Appendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Beams, Lintels and Troughs of Aqueducts(60 percentage) (Beam Terrace Floor) (SR NO 2.5.3) -...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Roof Slabs (50 percentage) (Roof slab, Basement Floor + Ground Floor) (Concrete SR NO - 2.5....
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Roof Slabs (50 percentage) (Roof slab First Floor) (Concrete SR NO - 2.5.3) ---- ETC AS PER ...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Roof Slabs (50 percentage) (Roof slab Second Floor) (Concrete SR NO - 2.5.3) ---- ETC AS PER...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Roof Slabs (50 percentage) (Roof slab Third Floor) (Concrete SR NO - 2.5.3) ---- ETC AS PER ...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Roof Slabs (50 percentage) (Roof slab Fourth Floor) (Concrete SR NO - 2.5.3) ---- ETC AS PER...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Roof Slabs (50 percentage) (Roof slab Fifth Floor) (Concrete SR NO - 2.5.3) ---- ETC AS PER ...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)RCC Roof Slabs (50 percentage) (Roof slab Terrace Floor) (Concrete SR NO - 2.5.3) ---- ETC AS PE...
Form Work and Centering
(Appendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum) Chejjas, Canopy and Other Architectural projections of
minor sections ( 45 percentage ) (RCC C...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)Chejjas, Canopy and Other Architectural projections of
minor sections (45 percentage ) (RCC Cill...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)Chejjas, Canopy and Other Architectural projections of
minor sections (45 percentage ) (RCC Cill...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)Chejjas, Canopy and Other Architectural projections of
minor sections (45 percentage ) (RCC Cill...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)Chejjas, Canopy and Other Architectural projections of
minor sections (45 percentage ) (RCC Cill...
Form Work and Centering
(Apendix Vol 1, Page No 111)
( percentage On Finished Rate of Concrete per cum)Chejjas, Canopy and Other Architectural projections of
minor sections (45 percentage ) (RCC Cill...
Form Work and Centering
(Appendix Vol 1, Page No 111)
(percentage On Finished Rate of Concrete per cum)Chejjas, Canopy and Other Architectural projections of minor sections (45 percentage ) (RCC Cill...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/w...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/w...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/w...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/w...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/w...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/w...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/msqm conforming to IS ...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround do...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide woode...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide woode...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide woode...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide woode...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide woode...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide woode...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspen...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspen...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspen...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspen...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspen...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspen...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspen...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(BASEMENT FLOOR + GROUND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(FIRST FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(SECOND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(THIRD FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(FOURTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(FIFTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(TERRACE FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete.( BASEMENT FLOOR + GROUND FLO...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete.( FIRST FLOOR) ---- ETC AS PE...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete.( SECOND FLOOR) ---- ETC AS P...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete.( THIRD FLOOR) ---- ETC AS PE...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete.( FOURTH FLOOR) ---- ETC AS P...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete.( FIFTH FLOOR) ---- ETC AS PE...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete.( TERRACE FLOOR) ---- ETC AS ...
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( BASEMENT FLOOR + GROUND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( FIRST FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( SECOND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( THIRD FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( FOURTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( FIFTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( TERRACE FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws et...
Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws e...
Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws e...
Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws e...
Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws e...
Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws e...
Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws e...
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms (BASEMENT FLOOR + GROUND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER I...
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms(FIRST FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms(SECOND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms(THIRD FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms(FOURTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms(FIFTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms(TERRACE FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) (BASEMENT FLOOR + GROUND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHA...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) FIRST FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) SECOND FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) THIRD FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) FOURTH FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) FIFTH FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) TERRACE FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10mm BASEMENT FLOOR + GROUND FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10mm FIRST FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10mm SECOND FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10mm THIRD FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10mm FOURTH FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10mm FIFTH FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10mm TERRACE FLOOR ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm (BASE...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ...
Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. (BASEMENT FLOOR + GROUND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINE...
Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. (FIRST FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHAR...
Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. (SECOND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHA...
Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. (THIRD FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHAR...
Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. (FOURTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHA...
Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. (FIFTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHAR...
Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. (TERRACE FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CH...
Providingand fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free w...
Providingand fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and le...
Providingand fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and le...
Providingand fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and le...
Providingand fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and le...
Providingand fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and le...
Providingand fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and le...
Providing and fixing of 2.5 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing and fixing of 2.5 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing and fixing of 2.5 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing and fixing of 2.5 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing and fixing of 2.5 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing and fixing of 2.5 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever require...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever require...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever require...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever require...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever require...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordin...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordin...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordin...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordin...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordin...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordin...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof including cost of material, labour, scaffolding etc as per spec...
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof including cost of material, labour, scaffolding etc as per spec...
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof including cost of material, labour, scaffolding etc as per spec...
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof including cost of material, labour, scaffolding etc as per spec...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 ...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 sqm) over and including priming coat of exterior primer applied at 2.20kg/10 sqm to give an eve...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 sqm) over and including priming coat of exterior primer applied at 2.20kg/10 sqm to give an eve...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 sqm) over and including priming coat of exterior primer applied at 2.20kg/10 sqm to give an eve...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 sqm) over and including priming coat of exterior primer applied at 2.20kg/10 sqm to give an eve...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 sqm) over and including priming coat of exterior primer applied at 2.20kg/10 sqm to give an eve...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 sqm) over and including priming coat of exterior primer applied at 2.20kg/10 sqm to give an eve...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 sqm) over and including priming coat of exterior primer applied at 2.20kg/10 sqm to give an eve...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS: 15622, of approved ma...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS: 15622, of a...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS: 15622, of a...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS: 15622, of a...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS: 15622, of a...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS: 15622, of a...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS: 15622, of a...
Providing and laying Polished Granite sTonne flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing and laying Polished Granite sTonne flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing and laying Polished Granite sTonne flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing and laying Polished Granite sTonne flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing and laying Polished Granite sTonne flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing and laying Polished Granite sTonne flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing and laying Polished Granite sTonne flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying flooring and steps fine machine polished granite sTonne slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement co...
Providing and laying flooring and steps fine machine polished granite sTonne slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement co...
Providing and laying flooring and steps fine machine polished granite sTonne slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement co...
Providing and laying flooring and steps fine machine polished granite sTonne slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement co...
Providing and laying flooring and steps fine machine polished granite sTonne slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement co...
Providing and laying flooring and steps fine machine polished granite sTonne slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement co...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M 30 grade made of CandD waste by block making machine with vibratory compaction laid in requir...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded sTonne aggregate 20 mm no...
Providing, laying and fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a b...
Providing, laying and fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a b...
Providing, laying and fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a b...
Providing, laying and fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a b...
Providing, laying and fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a b...
Providing, laying and fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a b...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing edge moulding to 18mm thick Granite sTonne counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in charge. BA...
Providing edge moulding to 18mm thick Granite sTonne counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in charge. FI...
Providing edge moulding to 18mm thick Granite sTonne counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in charge. SE...
Providing edge moulding to 18mm thick Granite sTonne counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in charge.THI...
Providing edge moulding to 18mm thick Granite sTonne counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in charge. FO...
Providing edge moulding to 18mm thick Granite sTonne counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in charge. FI...
Providing edge moulding to 18mm thick Granite sTonne counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in charge. TE...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. ...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. ...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. ...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. ...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. ...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. ...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. ...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and Fixing of Integral Densified Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm with Exposed GI Plain T24 Grid for Offic...
Providing and Fixing of Integral Densified Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm with Exposed GI Plain T24 Grid for Offic...
Providing and Fixing of Integral Densified Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm with Exposed GI Plain T24 Grid for Offic...
Providing and Fixing of Integral Densified Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm with Exposed GI Plain T24 Grid for Offic...
Providing and Fixing of Integral Densified Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm with Exposed GI Plain T24 Grid for Offic...
Providing and Fixing of Integral Densified Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm with Exposed GI Plain T24 Grid for Offic...
Providing and Fixing of Integral Densified Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm with Exposed GI Plain T24 Grid for Offic...
Providing and Fixing of Anti Microbial Bio Safe Coated Intergral Densi fied Tegular/Butt edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System without perforation Plain/Desi...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized ...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( g...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( g...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( g...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( g...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( g...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( g...
Providing and fixing granite sTonne slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with...
Providing and fixing granite sTonne slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with...
Providing and fixing granite sTonne slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with...
Providing and fixing granite sTonne slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with...
Providing and fixing granite sTonne slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with...
Providing and fixing granite sTonne slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with...
Providing and fixing granite sTonne slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with...
Design supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part III). The Suspended System held with Spider Fittings of ...
Design supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part III). The Suspended System held with Spider Fittings of ...
Design supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part III). The Suspended System held with Spider Fittings of ...
Design supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part III). The Suspended System held with Spider Fittings of ...
Design supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part III). The Suspended System held with Spider Fittings of ...
Design supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part III). The Suspended System held with Spider Fittings of ...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges, ...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing Black Round Rubber Column Corner Guard with Back side MS Column Guard Size: 100 MM X 100 MM X 1 Mts Length and 5 yellow reflecting radium stickers pasted on it at uniform interva...
Providing and fixing the aluminum corner guard for wall feature a 90dgrees angle, perfectly fit for 90dgrees corners. The 90dgrees angle makes the aluminum corner protector fit tightly against the wal...
Providing and fixing 100percentage Polyester Curtains with specification of regular wash as per direction of Engineer in charge Curtains First Floor ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing 100percentage Polyester Curtains with specification of regular wash as per direction of Engineer in charge Curtains Fifth Floor ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing in position copper plate as per design for expansion joints.(ALL FLOORS) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and filling in position,blown bitumen in expansion joints (ALL FLOORS) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade A in expansion joints. (ALL FLOORS) ---- ETC AS PE...
Providing and fixing sheet covering over expansion joints with iron screws as per design.Aluminium fluted strips 3.15 mm thick. 150 mm wide (ALL FLOORS) ---- ETC AS PER THE DIRECTION OF ENGINEER IN C...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...
Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/sqm width, along route of walls chipped for...
Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessa...
Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plas...
Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plas...
Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plas...
Providing and fixing good quality Exterior grade High Pressure Laminate (Single sided Thermosetting synthetic resin bonded sheet Craft Paper Base) of 6mm thick as per IS 2046 standard with colors as p...
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC...
Providing, laying and fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a b...
Providing and laying flamed finish Granite sTonne flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectura...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T iron 40x40x6 mm, with 40 m...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6 12 6 mm insulated glass (double glazed) vision Panel units of size and shape as required and specifie...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6 12 6 mm insulated glass (double glazed) vision Panel units of size and shape as required and specifi...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6 12 6 mm insulated glass (double glazed) vision Panel units of size and shape as required and specifi...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6 12 6 mm insulated glass (double glazed) vision Panel units of size and shape as required and specifi...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6 12 6 mm insulated glass (double glazed) vision Panel units of size and shape as required and specifi...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6 12 6 mm insulated glass (double glazed) vision Panel units of size and shape as required and specifi...
Vaccum de watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of machinery, Screed Vibratory, Power Floater, blade an...
Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, w...
Providing and fixing fire resistant door frame of section 143 x 57 mm
having built in rebate made out of 16 SWG G.I. sheet (zinc coating not
less than 120 gm/sqm) duly filled with vermuculite based ...
INTERNAL ELECTRICAL WORKS
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross 3 with Short circuit breaking ca...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross 3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross 3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross 3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross 3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross 3 with short circuit breaking cap...
Supplying,fixing and wiring residual current circuit breaker (RCCB) 240v/450v upto 300mA sensitivity on exisitng wood panel board. 32 40A 4 pole ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 16 Sqmm,...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 25 Sqmm,...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- ETC AS PER THE DIRECTION OF ENGINEER IN...
Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator w...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with I...
Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator w...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosu...
Supplying, installing, testing and commissioning of following capacity End Feed Unit made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with T...
200A TPN TAP OFF OBOX ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
100A TPN TAP OFF OBOX ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosu...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x...
Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator w...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40 ...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M...
Open Conduit System.Supply Heavy gauge PVC conduit pipe dia mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case ...
Open Conduit System.Supply Heavy gauge PVC conduit pipe dia mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case ...
Open Conduit System.Supply Heavy gauge PVC conduit pipe dia mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case ...
Open Conduit System.Supply Heavy gauge PVC conduit pipe dia mm thich confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case ...
Supplying heavy gauge PVC conduit pipe mm dia thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab.The conduit sh...
Supplying heavy gauge PVC conduit pipe mm dia thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab.The conduit sh...
Supplying heavy gauge PVC conduit pipe mm dia thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab.The conduit sh...
Supplying heavy gauge PVC conduit pipe mm dia thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fixing by br...
Supplying heavy gauge PVC conduit pipe mm dia thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fixing by br...
Supplying heavy gauge PVC conduit pipe mm dia thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., by grove cutting in the wall surface and fixing by br...
Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/lconduit entry as required with one coat of primer of approved make etc. 200x200x65 mm ---- ETC AS PER...
Supplying and fixing PVC/Metal conduit Deep Junction box 19/20mm deep Junction box ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing PVC/Metal conduit Deep Junction box 25mm deep Junction box ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing PVC/Metal conduit Deep Junction box 32mm deep Junction box ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall ---- ETC ...
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit CC floor ---- ETC AS PE...
Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required. 20mm ---- ETC AS PER THE DI...
Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required. 25Mm ---- ETC AS PER THE DI...
Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required. 32Mm ---- ETC AS PER THE DI...
Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required. 38Mm ---- ETC AS PER THE DI...
Supplying and fixing PVC casing and capping on the wall or ceiling using necessary materials like bends,junctionx box,elbows,screws at an interval of 300mm etc as required. 50Mm ---- ETC AS PER THE DI...
Supplying PVC/GI Flexible conduit pipe mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF s...
Supplying PVC/GI Flexible conduit pipe mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF s...
Supplying PVC/GI Flexible conduit pipe mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF s...
Supplying PVC/GI Flexible conduit pipe mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF s...
Supplying PVC/GI Flexible conduit pipe mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF s...
Supplying and fixing S hook made out of 14mm dia MS Rod ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing MS rafter clamp set made out of MS flat and 14mm MS Rod. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of Metal Fan box with Round Hook. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concaled system of wiring with speicified IS...
Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor conforming to IS 8130 1984 and (Virgin) PVC Insulation sheathed suitable for work...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module. ---- ETC AS PER THE DIRECTION OF ENGINEE...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Bell Push ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHA...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply and completely wired on existing box. ---- ETC AS PER THE DIRECTION OF ENGINEER ...
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. ---- ETC AS PER THE DIRECTION OF ENGINEER IN...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. ---- ETC AS PER THE DIRECTI...
Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying ......way plastic gang box and fixing using necessary
wooden/ rawl/phill plugs and screws. 6 to 10 Way Gang Box ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of metal clad industrial plugs and sockets 2 Pole + earth 250V PLUG 32A ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of metal clad industrial plugs and sockets 2 Pole + earth 250V PLUG 3 Pole + earth 440V PLUG .32A ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of metal clad industrial plugs and sockets 2 Pole + earth 250V PLUG 2pole+earth 250V SOCKET.32A ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of metal clad industrial plugs and sockets 2 Pole + earth 250V PLUG 3pole+earth 440V SOCKET.32A ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bakelite Ceiling Rose. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB).The entire plug and socket shall be mounted in a thermoplastic I powder coate...
Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB).The entire plug and socket shall be mounted in a thermoplastic I powder coate...
Supplying and fixing regular MCCB distrubution panel confiriming to IS/IEC 61439 3 and IK 09 tested as per IS/IEC 62262 with minimum IP 43 protection provided with Polyurethene (PUR) gasket, with suit...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross 3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross 3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross 3 with short circuit breaking cap...
Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.II Double Door 16 way SPandN ---- ETC AS PER...
Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure.III Double Door.4 Way TP and N ---- ETC AS P...
Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting ….....with poweder coated painting made out of 14SWG MS enclosure III Double Door.6 Way TP and N ---- ETC AS P...
Supplying and fixing regular MCB distrubution boards on wall/wood board/ flush mounting with poweder coated painting made out of 14SWG MS enclosure.III Double Door.8 Way TP and N ---- ETC AS PER THE D...
Supplying,fixing and wiring residual current circuit breaker (RCCB) 240v/450v upto 300mA sensitivity on exisitng wood panel board. 16A 25A 2 pole ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying,fixing and wiring residual current circuit breaker (RCCB) 240v/450v upto 300mA sensitivity on exisitng wood panel board. 63 A 4 Pole ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 10 Sqmm,...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 35 Sqmm,...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 50 Sqmm,...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 70 Sqmm,...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 95 Sqmm,...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 185 Sqmm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 300 Sqmm...
Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol 1, PWD SR Sl Nos 1.17.1) Earth work excavation for pipeline trenches in all kinds of soils by mechanical
means as per drawing...
66 Miscellaneous Materials Sl No. 105 (Old Item No - 66.12) Material code
Artificial/Manufacture Sand ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Refilling available earth around trenches/pipelines, cables in layers not
exceeding 20 cms in depth, compacting each deposited layer by ramming after
watering with a lead upto 50 m, and lift upto 1.5 ...
Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (Does not include cost of sand). ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- ETC AS PER THE DIRECTION OF ENGINEER IN ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 120 to 240 Sqmm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHA...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 300 to 400 Sqmm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHA...
Supplying and fixing of heavy duty brass cable glands suitable for UG cable of 1.1 KV class (metal only) 25mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of heavy duty brass cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of heavy duty brass cable glands suitable for UG cable of 1.1 KV class (metal only) 40mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of heavy duty brass cable glands suitable for UG cable of 1.1 KV class (metal only) 45mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of heavy duty brass cable glands suitable for UG cable of 1.1 KV class (metal only) 50mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of heavy duty brass cable glands suitable for UG cable of 1.1 KV class (metal only) 63mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of heavy duty brass cable glands suitable for UG cable of 1.1 KV class (metal only) 75mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
GI Pipe, 50 mm Dia for drain crossing, cable raising etc., (Extracted from Vol 5, BWSSB SR Item Nos 183) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
GI Pipe, 65 mm Dia for drain crossing, cable raising etc., (Extracted from Vol 5, BWSSB SR Item Nos 184) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol 5, BWSSB SR Item Nos 186) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Labour charges for laying and jointing GI pipes with earth work including fixing collars, elbows, tees, bends, gland cocks and other fittings with cuts and threads, white lead paints wherever necessar...
Labour charges for laying and jointing GI pipes with earth work including fixing collars, elbows, tees, bends, gland cocks and other fittings with cuts and threads, white lead paints wherever necessar...
Labour charges for laying and jointing GI pipes with earth work including fixing collars, elbows, tees, bends, gland cocks and other fittings with cuts and threads, white lead paints wherever necessar...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.10 sqmm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.16 sqmm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
25 Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
35 Sqmm Copper Terminal, Apprx Wt: 17 Gm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
50 Sqmm Copper Terminal, Apprx Wt: 26 Gm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
70 Sqmm Copper Terminal, Apprx Wt: 38 Gm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
95 Sqmm Copper Terminal, Apprx Wt: 58 Gm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
185 Sqmm Copper Terminal, Apprx Wt: 158 Gm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
300 Sqmm Copper Terminal ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 150x50mm ---- ETC AS PER THE ...
Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 300x50mm ---- ETC AS PER THE ...
Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 450x50mm ---- ETC AS PER THE ...
Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 600x50mm ---- ETC AS PER THE ...
Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 750x50mm ---- ETC AS PER THE ...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 M long GI pipe with GI funnel with mesh and suitable size reducer fixed on...
8 SWG GI Wire ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG Cu Wire ...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x6mm GI strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.40x6mm GI strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm Copper strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x6mm Copper strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.40x6mm Copper strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm Copper plate ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing flexible LED Strip Light ..... W Power consumption in 5 ms length CCT6500 degree K, CRIGreater than 70Percentage. efficacy Greater than80 lumen per W, lifeGreater than 25000 burni...
Supplying of ......feet PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours and 70Percentage lumen maintenance with CRI Greater than 80. Power Input:...
Supplying of ......feet PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours and 70Percentage lumen maintenance with CRI Greater than 80. Power Input:...
Supplying of ......feet PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours and 70Percentage lumen maintenance with CRI Greater than 80. Power Input:...
Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector and h...
Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector and h...
Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector and h...
Supplying of recess mounting non-integrated type LED downlight luminaire comprising of pressure die-cast/extruded aluminum housing with spring-loaded false ceiling clamps. The LED power/COB has a CCT ...
Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500...
Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500...
Supplying and fixing of retrofit type LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIGreater than 70Percentage. efficacy Greater than80 lumen per watt,...
Supplying and fixing of retrofit type LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIGreater than 70Percentage. efficacy Greater than80 lumen per watt,...
Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...
Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply.300mm Sweep ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wi...
Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. ---- ETC AS PER THE DIRECTION OF ENGI...
PLC Control: Supply, Erection, testing and commissioning of Automatic load transfer,RPR,REF,MDM with suitable CT's,Hardware interlocking through Aux contactor with timers , UV and OV, Annunciator, Pro...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50 ...
Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and o...
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- ETC AS PER THE DIRECTION OF ...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC 3 Rating and as per IS 13947.60 Amps ...
Supplying , and fixing of 6A, 3 Position, Auto Manual Selector Switch in existing Panel ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
End cap for sand wich type busbar raising main ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
630A TPN TAP OFF OBOX ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying 100A rated 3Phase with Neutral bus bar arrangement using required capacity Electrolytic Al strips covered with Heat shrinkable PVC sleves mounted on Phenolic/FRP/DMC insulators which are mou...
Supplying, fixing and wiring 0 to 100 A Direct Reading AC
analog type Ammeter. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, fixing and wiring rotary selector switch suitable for Ammeter. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, fixing and wiring 0 to 600Volts 96X96mm AC Voltmeter on existing panel/wood board. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
STREET LIGHTING PANEL Fabricating, Supplying and Mounting M.S. Box made out of 16 SWG of size 700x750x220mm suitable for floor / wall mounting, fully weather proof with provision for better heat desip...
Fabricating, supplying and erecting swaged tubular pole of height …M having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved qual...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supply of LED Bollard light fitting of ...W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection mould...
Fabrication, Supplying, Erection, Testing and Commissioning of 16 Ms long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) th...
Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access stre...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130 1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M...
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- ETC AS PER THE DIRECTION ...
Supplying,fixing of Electrical installation of buildings Requirements for special installations for medical locations (Group 2) and Indian NEC SP 30 Section 4, 2011 provision P5 requiresunearthed (IT)...
Parallel Connectors for (500mm air terminal) connecting two conductors in parallel manner. Material StSt, with clamping range Rd / Rd 7 10 mm and Complied as per Standard EN 62561 1. ---- ETC AS PER T...
Self supporting Air termination rod having length 3500 mm, of Material AlMgSi, of Diameter 22/16 / 10 mm, chamfered on both ends, and Complied as per Standard EN 62561 2. ---- ETC AS PER THE DIRECTIO...
Plastic support plate for 17 Kg concrete base ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Concrete block 17 kg ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
FS Clamps (Air termination Rod Clamps 16mm) for connecting air termination rods to roof conductor, EN 62561 1. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Air termination rod having length 3500 mm, of Material AlMgSi, of Diameter 16 / 10 mm, chamfered on both ends, and Complied as per Standard EN 62561 2. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CH...
Side Wall Clamp for air terminal,Material StSt 304 Clamping range 10/16 mm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
FS Clamps (Air termination Rod Clamps 16mm) for connecting air termination rods to roof conductor, EN 62561 1. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Universal connector of Material StSt, with clamping range 8 10mm, with truss head screw M10x35 mm and Complied as per Standard EN 62561 1. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Roof Conductor of Diameter 8 mm, Cross section 50 mm2, of Material AlMgSi and Complied as per Standard EN 62561 2. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Conductor holder for Parapet wall/Side wall Conductor holder for Parapet wall/Side wall of Material StSt, for Rd 8 10 mm Fl 20 mm, Height 20 mm and Complied as per Standard EN 62561 4. With accessorie...
Roof conductor holder FB2 for flat roofs with concrete block C35/45 with double conductor holder Rd 8 mm fixed, Dimension 141 x 86 x 70 mm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Connection Clamps for Steel/metal column. Clamping range of the clamp 3 18 mm, Material of the clamp StSt, Clamping range of conductor Rd 6 10 mm, and Complied as per Standard EN 62561 1. ---- ETC AS ...
Down Conductor of Diameter 8 mm, Cross section 50 mm2, of Material AlMgSi
and Complied as per Standard EN 62561 2, ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Conductor holder for Parapet wall/Side wall of Material StSt, for Rd 8 10 mm Fl 20 mm, Height 20 mm and Complied as per Standard EN 62561 4. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
UNI Disconnecting Clamps with intermediate plate for round and flat conductor of Material StSt, Material thickness 2.5 mm, with clamping range Rd / Fl 8 10 / 30 mm, and Complied as per Standard EN 625...
GI flat (25x6mm) Strip. Having width 25mm, Thickness 6mm, Material Hot dipped Galvanized Iron, Cross Section 150mm2 Coating thickness Avg. 70 microns. and Complied as per IEC 62561 2., ---- ETC AS PER...
GI strip holder of material Dow moulded compound, having height 19mm, Slot Size 25x6 mm. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Copper bonded rod with Low carbon steel, high tensile strength copper bonded rod with min 254 microns of copper plating, UL listed with company name marked on rod.
Diameter 17.2 mm, Length 3 meters, M...
20 kg backfilled compound, Material Carbon ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
StSt 316 grade clamp to terminate the load on earth electrode. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Poly plastic pit cover of material Polymer Body and Cover, Product Code HEP, Dimensions 308 mm (L) x 308 mm (W) X 214 mm (H), Weight 2.5 kg (5.50 LBS)., ---- ETC AS PER THE DIRECTION OF ENGINEER IN CH...
GI flat (25x6mm) Strip. Having width 25mm, Thickness 6mm, Material Hot dipped Galvanized Iron, Cross Section 150mm, Coating thickness Avg. 70 microns. and Complied as per IEC 62561 2., ---- ETC AS PER...
Supply And Installation of 16 m Havels High mast with 8nos of 300W Luminaries including erection,LED luminaries,earthing complete all work as per Engineer Incharge ---- ETC AS PER THE DIRECTION OF ENG...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Eart...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Eart...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Eart...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Eart...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Eart...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for Lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor conforming to IS 8130-1984 and (Virgin) PVC Insulation sheathed suitable for work...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module ---- ETC AS PER THE DIRECTION OF ENGINEER...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap...
Supplying and fixing of minature circuit breakers on exisitng MCB distrubution boards using necessary fixing materials and C Type curve, indicator ON/OFF energy cross-3 with short circuit breaking cap...
Supplying of recess mounting non integral type ........ LED w
luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wi...
Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. ---- ETC AS PER THE DIRECTION OF ENGI...
Fabricating supplying and mounting MS box made out ....SWG
suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator w...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with I...
Supplying, fixing and wiring 1000/5A to 1600/5A 15VA
Burden class 1 Current Transformer ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of LED type panel board indicating lamp
with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply, installation, Testing and Commissioning of Individual DX Condensing Unit with Double Decker AHU of Double Skin of 40mm Puf Insulation along with Thermal Break Pofile of below Capacity Along wi...
SUPPLY ERECTION TESTING and COMISSIONING 5.5 TR Air cooled out door condensing units comprising of semi -hermetic / hermetic reciprocating/scrool compressors with matching air cooled condenser suitabl...
SUPPLY ERECTION TESTING and COMISSIONING Collar damper made out of Al. with powder coated as per return air openinig size ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
SUPPLY ERECTION TESTING and COMISSIONING Aluminium Vol control dampers manual operated, Only for hepa module, unit mouth and branch Ducts ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
SUPPLY ERECTION TESTING and COMMISSIONING Fire Dampers with Fusible Links rated for 72 deg C for AHU mouth, with fire damper actuator with inter link with AHU controll panel in case of fire AHU motor ...
SUPPLY ERECTION TESTING and COMISSIONING Fire retardant flexible connections for AHU supply and return air mouth ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
SUPPLY ERECTION TESTING and COMISSIONING Al. ducting including the supports,selicon sealent with painted MS angle flanges. 22 guage ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
SUPPLY ERECTION TESTING and COMISSIONING Supply and return air duct Insulation with factory laminated Al. foil class 'O' grade 13 mm thk for return air duct ---- ETC AS PER THE DIRECTION OF ENGINEER I...
SUPPLY ERECTION TESTING and COMISSIONING Supply and return air duct Insulation with factory laminated Al. foil class 'O' grade 19 mm thk for supply air duct ---- ETC AS PER THE DIRECTION OF ENGINEER I...
Polishield covering with two coats paint for exposed duct ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
SUPPLY and Fixing 300 dia Insulated flexible connection for grille module and return air raiser ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
25 mm PVC dia drain piping with supports for AHUs ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
PLUMBING, SANITATION SYSTEM, BOREWELL, SOLAR AND HEAT PUMP
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...
Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD577. ( Jaguar make or Equale...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing starwhite counter wash basin 405mm dia cat no: 10095 with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of counter top pattern, including painting of fitting...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...
Providing and fixing 100 mm sand cast Iron grating for gully trap. Iron grating for gully trap (GROUND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe40mm dia pipes, From wash basin waste lines, Waste Pipe (BASEMENT FLOOR + GROUND FL...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe40mm dia pipes, From wash basin waste lines, Waste Pipe (FIRST FLOOR) ---- ETC AS P...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe40mm dia pipes, From wash basin waste lines, Waste Pipe (SECOND FLOOR) ---- ETC AS ...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe40mm dia pipes, From wash basin waste lines, Waste Pipe (THIRD FLOOR) ---- ETC AS P...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe40mm dia pipes, From wash basin waste lines, Waste Pipe (FOURTH FLOOR) ---- ETC AS ...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe40mm dia pipes, From wash basin waste lines, Waste Pipe (FIFTH FLOOR) ---- ETC AS P...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe40mm dia pipes, From wash basin waste lines, Waste Pipe (TERRACE FLOOR) ---- ETC AS...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expan...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expan...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expan...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expan...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expan...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expan...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expan...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter Shower Rose (BASEMENT FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameterShower Rose (FIRST FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameterShower Rose (SECOND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameterShower Rose (THIRD FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameterShower Rose (FOURTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameterShower Rose (FIFTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. Wall Mixer (BASEMENT FLOOR + GROUND FLOOR) ---- ETC AS PER THE...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. Wall Mixer (FIRST FLOOR) ---- ETC AS PER THE DIRECTION OF ENGI...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. Wall Mixer (SECOND FLOOR) ---- ETC AS PER THE DIRECTION OF ENG...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. Wall Mixer (THIRD FLOOR) ---- ETC AS PER THE DIRECTION OF ENGI...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. Wall Mixer (FOURTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENG...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. Wall Mixer (FIFTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGI...
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing DI/CI puddle flanges conforming to IS 71811986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. ...
Providing and fixing DI/CI puddle flanges conforming to IS 71811986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. ...
Providing and fixing DI/CI puddle flanges conforming to IS 71811986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. ...
Providing and fixing DI/CI puddle flanges conforming to IS 71811986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot andcold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore (GROUND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore (TERRACE FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply and delivery at site GM (copper alloy) gate valves confirming to ClassI as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed f...
Supply and delivery at site GM (copper alloy) gate valves confirming to ClassI as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed f...
Supply and delivery at site GM (copper alloy) gate valves confirming to ClassI as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed f...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc, and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc, and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc, and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc, and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc, and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc, and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc, and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
KSRB 125.1 : Constructing brick masonry circular type manhole 0.91 m internal dia at bottom,0.91m deep and 0.56m dia at top with table moulded nonmodular bricks of 50 class designation 50 in cement mo...
KSRB 125.2 : Constructing brick masonry circular type manhole 1.67 m internal dia at bottom, 0.91m deep and 0.56m dia at top with table moulded nonmodular bricks of 50 class designation 50 in cement m...
KSRB 126.1 : Providing 20mm square M.S footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges...
Constructing brick masonry inspection chamber 600x600mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded nonmodular bricks of class designation 50 in cement mortar...
Constructing brick masonry inspection chamber 450x450mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded nonmodular bricks of class designation 50 in cement mortar...
Earth work excavation for pipeline/cables trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction ...
Providing and fixing toilet paper holder : C.P. brass
Toilet Paper Holder (BASEMENT + GROUND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing toilet paper holder : C.P. brass
Toilet Paper Holder (FIRST FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing toilet paper holder : C.P. brass
Toilet Paper Holder (SECOND FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing toilet paper holder : C.P. brass
Toilet Paper Holder (THIRD FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing toilet paper holder : C.P. brass
Toilet Paper Holder (FOURTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing toilet paper holder : C.P. brass
Toilet Paper Holder (FIFTH FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing toilet paper holder : C.P. brass
Toilet Paper Holder (TERRACE FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by applicatio...
Air Vent Cowel 150mm Down Take Pipe (TERRACE FLOOR) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CONCHR347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standard...
Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed draw...
Supplying, fixing and testing inlet, outlet, vent and over flow pipes, fittings with C.I frame with cover to over head tank complete with PVC rungs, etc complete as shown in the drawing. all puddle fl...
Supplying, fixing and testing inlet, outlet, vent and over flow pipes, fittings with C.I frame with cover to over head tank complete with PVC rungs, etc complete as shown in the drawing. all puddle fl...
Supplying, fixing and testing inlet, outlet, vent and over flow pipes, fittings with C.I frame with cover to over head tank complete with PVC rungs, etc complete as shown in the drawing. all puddle fl...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing and fixing squremouth S.W gully trap class SP1 complete with C.I grating brick masonry chamber 150 X100mm size Ptype with Non modular common burnt clay bricks of designation 3.5 and with wat...
Supplying, installing, testing and commissioning of Domestic Water lift mono block pump of adequate HP capable of giving required discharge at suitable head to work on 3 phase 50Hz 400/400 V with nece...
Supplying, installing, testing and commissioning of Domestic Water lift mono block pump of adequate HP capable of giving required discharge at suitable head to work on 3 phase 50Hz 400/400 V with nece...
Supplying, installing, testing and commissioning of Domestic Water lift mono block pump of adequate HP capable of giving required discharge at suitable head to work on 3 phase 50Hz 400/400 V with nece...
Supplying, installing, testing and commissioning approved make water level controller (RMG or equivalent )for the Underground Sump and overhead tank. The quoted rate shall include for necessary wiring...
Supply, installation in position, testing and commissioning of electrically driven submersible drainage pumps of approved make capable handling 10mm solid particles and of discharging as indicated bel...
Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting ...
Sinking of borewell of 165 mm dia clear using super fast hydraulic of capacity 300 PSIG and above 1100 CMF and above in all strata including over burden upto 20 M fixing of casing pipes, collars and c...
Sinking of borewell of 165 mm dia clear using super fast hydraulic of capacity 300 PSIG and above 1100 CMF and above in all strata including over burden upto 20 M fixing of casing pipes, collars and c...
Sinking of borewell of 165 mm dia clear using super fast hydraulic of capacity 300 PSIG and above 1100 CMF and above in all strata including over burden upto 20 M fixing of casing pipes, collars and c...
Sinking of borewell of 165 mm dia clear using super fast hydraulic of capacity 300 PSIG and above 1100 CMF and above in all strata including over burden upto 20 M fixing of casing pipes, collars and c...
Sinking of borewell of 165 mm dia clear using super fast hydraulic of capacity 300 PSIG and above 1100 CMF and above in all strata including over burden upto 20 M fixing of casing pipes, collars and c...
Sinking of borewell of 165 mm dia clear using super fast hydraulic of capacity 300 PSIG and above 1100 CMF and above in all strata including over burden upto 20 M fixing of casing pipes, collars and c...
Supply Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel t...
Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034 2000 3Phase, SS Bowl and Impeller with Low volt Motor as per specifications, to work site as per necessary ...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for UPVC Column pipes for Submersible pumpsets. complete with all lead and lift and work to be executed as per th...
Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. etc., complete with all lead and lift and work to be executed as per the s...
Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of ...
Labour charges for Erection of outdoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc., comp...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirmining to table 3 class 5 of ...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...
Supplying and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wood...
Supplying and fixing miniature circuit breakers/Isolators on existing MCB distribution boards using necessary fixing materials and wiring complete as directed by the Engineer-in-charge - 5 to 30 Amps ...
Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour. 32A ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery (48/6.35) like induction motor --...
Supply installation testing and commissioning of Air source Heat pump of hot water output of 1000 lt/hr, with imported primary circulation pump, compressor, heat exchanger, expansion valve, evaporato...
Supplying, installation, testing and commissioning of solar hotwater heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stain...
FIRE FIGHTING SYSTEM
Supply, erection, testing and commissioning of electrical motor driven end suction back pull out centrifugal pump capable of delivering,adequate LPM at required head. when running at 2900 rpm directly...
Supply, installation, testing and commissioning of diesel engine driven pump, horizontal mounted, Horizontal spiltcase centrifugal single stage pump, capable of delivering required flow at required he...
Supply, Installation, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suita...
Supply, erection, testing & commissioning of electrical motor-driven end-suction back-pullout centrifugal pump capable of delivering adequate LPM at required head when running at 2900 RPM, directly co...
Supplying, Installing, testing and commissioning of Electrical Booster pump Control panel for firefighting system consisting of Feeder For 1 No. of Booster pumps: 1 no of 32A TP-N MCCB (50KA) with 12....
Supply, erection, testing and commissioning of Fire Fighting panel cubicle type made out of 14/16 SWG MS CRC A sheet, which is derusted, degreased, phosphated and passivated with angle iron skeleton o...
Supplying, fixing, testing and commissioning of CI butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of foll...
Supplying, fixing, testing and commissioning of CI butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of foll...
Supplying, fixing, testing and commissioning of CI butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of foll...
Supplying, installing, testing and commissioning of PN16 CI "Non-Return Valve" confirming to IS 13039 with necessary bolts and nuts, etc. complete, including cost of all materials, labor charges with ...
Supplying, installing, testing and commissioning of PN16 CI "Non-Return Valve" confirming to IS 13039 with necessary bolts and nuts, etc. complete, including cost of all materials, labor charges with ...
Supplying, installing, testing and commissioning of PN16 CI "Non-Return Valve" confirming to IS 13039 with necessary bolts and nuts, etc. complete, including cost of all materials, labor charges with ...
Supply and installing, testing and commissioning of CI "Y" strainer confirming to IS standard with necessary bolts and nuts complete, including cost of all materials, labor charges with all lead, lift...
Supply and installing, testing and commissioning of CI "Y" strainer confirming to IS standard with necessary bolts and nuts complete, including cost of all materials, labor charges with all lead, lift...
Supplying, fixing, and testing of air cushion vessel fabricated out of 8 mm thick MS pipe, 250 mm diameter (the ends should be dished), 1.2 m high, installed vertically on suitable legs. Flange connec...
Supplying, fixing, and testing of air cushion vessel fabricated out of 8 mm thick MS pipe, 250 mm diameter (the ends should be dished), 1.2 m high, installed vertically on suitable legs. Flange connec...
Pressure switch including isolation valve and forged siphon tube, including all accessories as per IS specifications, etc., complete as per specification with all lead and lift, loading, unloading, la...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
FIREFIGHTING ELECTRICALSupply of the Following XLPE armoured cable 1100 V Grade with ISI mark stranded / solid, aluminimum conductor complete with crimping type Lugs and Glands etc completed.
4.0 Core 16.00 Sq.mm.Main Panel to Jockey ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
12 Core x 2.5Sqmm For Main Panel to DG ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
3 Core x 1.5Sqmm for Pressure Switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, installation, testing and commissioning of 12V ..AH
batteries in poly propylene container for D.G. sets. Low maintenance
batteries, plate type. (150 AH capacity) ---- ETC AS PER THE DIRECTI...
Supplying and installing following size of perforated painted with powder cating m.s. cable trays with perforation not more than 17.5percentage in convenient sections, joined with connectors, suspende...
GI/Copper strips for grounding connections, using necessary fixing materials as required. (25 x 3 mm GI strip) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete...
SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges ne...
SITC of Gun metal BALL VALVE SIZE OF 19/20 mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charge...
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting wel...
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting wel...
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting wel...
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting wel...
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting wel...
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting wel...
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting wel...
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting wel...
Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete ...
Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete ...
Supplying, installing , testing and commissioning approved make CI butterfly valves of 100mm diameter confirming to IS 13039 with necessary nuts and bolts etc., complete ---- etc., complete as per spe...
Supplying, installing , testing and commissioning approved make CI butterfly valves of 50mm diameter confirming to IS 13039 with necessary nuts and bolts etc., complete ---- etc., complete as per spec...
Providing and fixing Flow Switch in following sizes M.S. pipe including connnection etc as required.150mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing, fixing, testing and commissioning ofinstallation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm andhydraulicall...
Supplying Installing, testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia. Including cost of materials, labour, usage charges of machine...
Supplying Installing, testing and commissioning of 100mm dia 2 way Fire brigade inlet connection of 2 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per sp...
FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve,spindle and cast iron hand wheel. It has a female ...
Supplying Installing, testing and commissioning of63mm mm dia double headed Gun mental Hydrant Valve with flanged inlet 2Nos, stop valve, spindle and cast iron hand wheel. It has a 2 Nos female instan...
Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal cou...
Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour,usage charges of machinery complete as pe...
Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...
Supplying Installing, testing and commissioning of Hose reel cabin ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or f...
Providing,Installation,testing and commissioning of Water Curtain Nozzle, 15mm dia nickel chrome plate brass,BSPT, K- factor as per design consideration complete as required. ---- ETC AS PER THE DIREC...
Supplying, installing , testing and commissioning approved make motorised value of Water Curtain with necessary nuts and bolts etc., complete ---- etc., complete with all lead and lift, as per specifi...
Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete...
SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges ne...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gr...
Supplying Installing, testing and commissioning of approved make 15mm dia sprinkler bulb pendent/wall mounted type designed to operate 68 degrees centegrad Make Tyco/HD FIRE complete (Colour code of b...
Stainless steel braided flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as re...
Supplying Installing, testing and commissioning of Ceiling Mounted powder coated Surface Finishing Mild Steel Rosette Plate including cost of materials, labour, usage charges of machinery complete as ...
CO2 2Kg Squeeze grip
Providing 2 Kg C02 Gas Type Fire Extinugisher Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Di...
Providing Water Mist 4 Kg CO2 Gas Type Fire Extinguisher, used Unused Mechanism, Squeeze Grip , Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 600MM Diameter 108MM, Discharge Time less than 8 Se...
Providing Aqueous Film-Forming Foam - 9 Ltr
Providing 9 Ltr Fire Extinugisher Aqueous Film-Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Okg. empty weight 6.10kg Can Height...
Providing ABC Powder based MAP 50, 6Kg:-Providing 6kg Fire Extinguisher Mono Ammonium Phos phate Powder 50,
Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5
Kg, Can Height 4...
Supply, installation in position, testing and commissioning of 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg....
Supplying of two bucket stand alongwith buckets. complete ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and fixing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete ...
Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, ...
Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, ...
Supplying Installing, testing and commissioning of Resettable type Manual Call point. works on 24V DC LED indicator with glass Fronted. Fire Symbol. The red Manual Call Point is approved to EN54-11 st...
Supplying Installing, testing and commissioning of Public address system (Two-way communication type) as per requirement of Fire Force authority and which generally comprises of Supplying Installing, ...
Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, ...
Supply installation testing commissioning of P.A System Rack made out of 18 gauge M.S. Sheet with glass door with locking arrangement and powder coating grey paint two coats at inner and outer of box,...
Supplying Installing, testing and commissioning of P.A.System console panel with push button with speaker and indictoron Accomdated in M.S.Cabinet with painting -do- 40 Zone cansole. Complete ---- ETC...
P.A.System amplifier 250W RMS out put with complete wiring and controls accessable form front ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying Installing, testing and commissioning of MIKE ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying Installing, testing and commissioning of Public address system (Two way comminication type) as per requirement of Fire Force authority and which Generally comprise of Supplying Installing, t...
Supplying heavy gauge PVC conduit pipe......mm dia..........mm thick confirming to IS2509 with suitable size bends, metal PVC Junction boxes, adhesive pasteetc., and running before concreting the slab...
Wiring for lighting/power circuit using one ofF RLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supply, Installation, Testing and Commissioning of Power amplifier, 2x500W PAVIRO 2 x 500 W class-D power amplifier (70/100 V output) u Low power consumption in standby mode u Excellent sound quality,...
Supply, Installation, Testing and Commissioning of Controller,Public address and emergency sound system control unit u Control and routing of 4 simultaneous audio channels u One controller supports 12...
Supply, Installation, Testing and Commissioning of Call station Call station with soft touch button for PAVIRO system u 15 freely programmable buttons Customization via built-in display and keys Provi...
Supply, Installation, Testing and Commissioning of 6W Black Color Cabinet Loudspeaker wall Mounted Robust, solid MDF (Medium Density Fiber board) enclosure ---- ETC AS PER THE DIRECTION OF ENGINEER IN...
Supply, installation, testing and commissioning of Ceiling Loudspeaker Range Suitable for speech and music reproduction Light weight ABS material Easy to install Optional back-box Unobtrusive design i...
SITC of 17 U Rack and other Accessories as required for AV systems (rack shall be powder coated type, enclosed with door opening on front side, ventilation provision and standard dimensions to meet th...
Supply and Laying of 2 core 1.5sq mm ATC twin twisted unarmoured LS Cable ---- etc., Complete With all lead and lift and work to be executed as specification and Engineering -in -charge of work. ---- ...
Supply and Lying of 25mm PVC medium duty conduit and accessories ISI with proper fitting to draw cables in Surface ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply, install, test and commissioning of addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character /240X64 Pixel / 7inch Touchscreen graphic...
Supply, intallation, testing and Commissioning of central Graphical fire alram managements system of centrally monotor and operate the fire alram system complete as required. ---- ETC AS PER THE DIREC...
Supply, intallation, testing and Commissioning of Network card for fire alram panels integration ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply, Installation , Testing and Commissioning of Network Active Repeater Panel with 1500 Character / 240X64 Pixel / 7inch Touchscreen. The LCD shall Display all events / detectors, devices status...
Supply, intallation, testing and Commissioning of loop card ---- etc., complete with all lead and lift, as per specifications and as per directions of the Engineer in charge of the work. ---- ETC AS P...
Supply,installation,testing andcommissioning of analogue addressable Smoke Sensor detector and standard base(ForDetectors/Device without inbuilt isolator,Fault Isolator or Isolator base to be provided...
SITC OF Fault isolation module:- Supply, Erection,Testing and Commissioning of UL-APPROVED Analog addressable fault isolator circuit modules of wall mounted type with mounting accessories. ---- ETC AS...
Supply, Installation, Testing and Commissioning of Analogue Addressable loop powered Sounder and Beacon with inbuilt isolator and having Min 15 distinct sound patterns or multitone to indicate Exi...
Supplying Installing, testing and commissioning of Resettable type Manual Call point . works on 24V DC LED indicator with glass Fronted. Fire Symbol .The red Manual Call Point is approved to EN54-11 s...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm ---- ETC AS P...
Supply, install, test and commissioning of Analogue addressable Monitor Cum Control (Input/Output) module (1+1) with inbuilt relay and isolator with LED indicator, approved to operate in minus 10C to ...
Supply, intallation, testing and Commissioning of 2C 1.5 sq mm armoured FRLS cables in celing with suitable clamps and screws (RED colour) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, installation, testing and commissioning of 12VDC, AH batteries in polypropylene container for U.P.S .Sealed maintenance free batteries.7 AH capacity ---- ETC AS PER THE DIRECTION OF ENGINEE...
Supplying of ..... TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 230V/50Hz with hermetically sealed inverter compressor with air cooled condenser, latest R4...
Supplying of ..... TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 230V/50Hz with hermetically sealed inverter compressor with air cooled condenser, latest R4...
Supplying of ..... TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 230V/50Hz with hermetically sealed inverter compressor with air cooled condenser, latest R4...
Supply, erection, testing, commissioning of package type Duct able type split AirConditioner with microprocessor control, fitted with twin scroll Compressor with R22/Latest Refrigerant. The unit shall...
Supply, erection, testing, commissioning of package type Duct able type split AirConditioner with microprocessor control, fitted with twin scroll Compressor with R22/Latest Refrigerant. The unit shall...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable angle iron support upto 3.0 Ton split/cassette type A/C. ---- ETC...
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit leak testing oil and gas...
Supply, fabrication and installation of GI Ducting Along with flanges, supports and all fixing materials.
24 Gauge. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply, fabrication and installation of GI Ducting Along with flanges, supports and all fixing materials.
22 Gauge. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply and installation of Thermal insulation using 13mm nitrile rubber for return air ducts. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply and installation of Tarpaulin canvas between the AC duct and AC evaporator unit including accessories. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply and installation of Powder coated aluminium diffusers of size 595x595mm for supply and return air.
Aluminium Diffusers ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Collar Dampers ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
GI Mixing Box ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Flexible Duct Per Mtr ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply and fixing of powder coated extruded aluminium grill suitable for supply/return air including all fixing hardware etc.,. Complete.
6" Extruded aluminium grille with 15 deg to 30 deg louvers. --...
Supplying and filling refrigerant latest R410 / R32 for Air conditioning equipment's. Which includes the labour and Nitrogen gas for pressure and leak testing. ---- ETC AS PER THE DIRECTION OF ENGINEE...
Supplying push button operated direct online starter with anantiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overloadrelay help in anticorrosio...
Supply, Installation, Testing and Commissioning of Air cooled Modular type Top Discharge VRV/VRF Outdoor units with Inverter Driven / Digital scroll single/multi Compressor, special precoated Hydrophl...
Supply, Installation, Testing and Commissioning of Air cooled Modular type Top Discharge VRV/VRF Outdoor units with Inverter Driven / Digital scroll single/multi Compressor, special precoated Hydrophl...
Supply, Installation, Testing and Commissioning of Air cooled Modular type Top Discharge VRV/VRF Outdoor units with Inverter Driven / Digital scroll single/multi Compressor, special precoated Hydrophl...
Supply, Installation, Testing and Commissioning of Air cooled Modular type Top Discharge VRV/VRF Outdoor units with Inverter Driven / Digital scroll single/multi Compressor, special precoated Hydrophl...
Supply, Installation, Testing and Commissioning of Air cooled Modular type Top Discharge VRV/VRF Outdoor units with Inverter Driven / Digital scroll single/multi Compressor, special precoated Hydrophl...
Supply, Installation, Testing and Commissioning of Air cooled Modular type Top Discharge VRV/VRF Outdoor units with Inverter Driven / Digital scroll single/multi Compressor, special precoated Hydrophl...
Supply, Installation, Testing and Commissioning of Air cooled Modular type Top Discharge VRV/VRF Outdoor units with Inverter Driven / Digital scroll single/multi Compressor, special precoated Hydrophl...
Supply, Installation, Testing and Commissioning of Air cooled Modular type Top Discharge VRV/VRF Outdoor units with Inverter Driven / Digital scroll single/multi Compressor, special precoated Hydrophl...
Supply, Installation, Testing and Commissioning of Air cooled Modular type Top Discharge VRV/VRF Outdoor units with Inverter Driven / Digital scroll single/multi Compressor, special precoated Hydrophl...
Supply, installation, testing and commissioning of Air cooled VRV/VRF outdoor units Interface/Communicate to with Third party Building Automation/BMS System. (Bacnet integrator for 64 Indoor unit)
Supply, Installing, testing and commissioning of Centralized Intelligent "I" Touch Manager Controller with LCD display server for entire circuits with relay interface and necessary hardware/software. ...
Supply Installation, Testing and Commissioning of VRV/VRFMS Ductable CSU with multi (3 step) speed controller and outlet with canvass connection.
These unit shall be includeing of multi speed fan (lo...
Supply Installation, Testing and Commissioning of VRV/VRFMS Ductable CSU with multi (3 step) speed controller and outlet with canvass connection.
These unit shall be includeing of multi speed fan (lo...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (950x950) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (950x950) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (950x950) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (950x950) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (950x950) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (950x950) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (950x950) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (625x625) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (625x625) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of Ceiling mounted VRV/VRF4 Way Cassette Units with Panel (625x625) with multi (3 step) speed controller.
These unit shall be includeing of multi speed ...
Supply Installation, Testing and Commissioning of VRV/VRFHIWall Units with multi (3 step) speed controller.
These unit shall be includeing of multi speed fan (low noise), with fan section, washable ty...
Supply Installation, Testing and Commissioning of VRV/VRFHIWall Units with multi (3 step) speed controller.
These unit shall be includeing of multi speed fan (low noise), with fan section, washable ty...
Supply Installation, Testing and Commissioning of VRV/VRFHIWall Units with multi (3 step) speed controller.
These unit shall be includeing of multi speed fan (low noise), with fan section, washable ty...
Supply Installation, Testing and Commissioning of VRV/VRFHIWall Units with multi (3 step) speed controller.
These unit shall be includeing of multi speed fan (low noise), with fan section, washable ty...
8.5 TR / 3,400 CFM with 50 TSP (approx) 2.2 Kw for CSU's and 1x8.5.0 Condensing units with necessary KIT.
Supply, Installation, Testing and Commissioning of Customized Double Skin Horizontal Ceiling M...
11.0 TR / 4,400 CFM with 50 TSP 2.2 Kw for CSU's and 1x11.0 Condensing units with necessary KIT.
Supply, Installation, Testing and Commissioning of Customized Double Skin Horizontal Ceiling Mounted ty...
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper piping with insulation with CoExtruded polymer blended jacket of UL 94 Approved.
Supply, installation, testing and commissioning of high pressure grade required copper connection Y or TRefnet joints for liquid and suction line complete erected on wall/ceiling with supports/raceway...
Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Fresh air Units Sand witched between 0.6 precoated GI (outer skin) shall be pre coated and ...
Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Fresh air Units Sandwitched between 0.6 precoated GI (outer skin) shall be pre coated and 0...
Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Fresh air Units Sandwitched between 0.6 precoated GI (outer skin) shall be pre coated and 0...
Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Fresh air Units Sandwitched between 0.6 precoated GI (outer skin) shall be pre coated and 0...
Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Fresh air Units Sandwitched between 0.6 precoated GI (outer skin) shall be pre coated and 0...
Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Fresh air Units Sandwitched between 0.6 precoated GI (outer skin) shall be pre coated and 0...
Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Exhaust air Units Sandwitched between 0.6 precoated GI (outer skin) shall be pre coated and...
Supply, Installation, Testing and Commissioning of Rectangular / Circular inline fan with variable speed regulator with suitable for installing in any position in vertical or horizontal ducts. All acc...
Supply, Installation, Testing and Commissioning of Rectangular / Circular inline fan with variable speed regulator with suitable for installing in any position in vertical or horizontal ducts. All acc...
Supply, Installation, Testing and Commissioning of Rectangular / Circular inline fan with variable speed regulator with suitable for installing in any position in vertical or horizontal ducts. All acc...
Supply, Installation, Testing and Commissioning of Rectangular / Circular inline fan with variable speed regulator with suitable for installing in any position in vertical or horizontal ducts. All acc...
Supply, Installation, Testing and Commissioning of Rectangular / Circular inline fan with variable speed regulator with suitable for installing in any position in vertical or horizontal ducts. All acc...
Supply, Installation, Testing and Commissioning of Direct driven Propeller Fans for CFM as indiated in the drawings, each fan shall be complete with permanent split capacitor or shaded pole motor, mou...
Supply, Installation, Testing and Commissioning of Galvanized ductClass VIII with zinc coating of 120 gm / Sqmt surface area as per IS277. With TDF/TDC Flange system with factory fabricated Box sectio...
Supply, Installation, Testing and Commissioning of Open cell "Class1" Nitrile rubber Insulation for Duct Acoustics insulation with Ultrafresh Antimicrobial protection as per ASTM G21, ASTM G22, UL181 ...
Supply, Installation, Testing and Commissioning of Open cell "Class1" Nitrile rubber Insulation for Wall Acoustics insulation with PreFabricated Panels of 600 x 600 mm (or size suiting site/AHU room c...
Supply, Installation, Testing and Commissioning of Closed cell "ClassO" Nitrile rubber Insulation with Factroy Laminated Alufoil with Ultrafresh Antimicrobial protection with both side skin/smooth sur...
Supply, Installation, Testing and Commissioning of Factory fabricated powder coated Double skin plenum. Outer skin constructed with not less than 0.63mm thick GI sheet and the inner sheet shall be of ...
Supply, Installation, Testing and Commissioning of Fire damper with opposed blade (Fusible link type). Fire damper as per UL 555, outer shell constructed with 1.6mm thick galvanized steel frame and th...
Supply, Installation, Testing and Commissioning of Quadrant type Vol controle Damper (VCD). The Vol control damper shall be of low leakage type with the outer shell constructed of 1.6mm thick galvaniz...
Supply, Installation, Testing and Commissioning of Back draft damper (BDD). The Back draft damper with the outer shell constructed of 1.6mm thick galvanized steel frame and the blade/Leaf with 1mm thi...
Supply, Installation, Testing and Commissioning of Butterfly Damper GI Constructed Single Flap with round flange on one side and 10mm grove on other side for fixing of flexible duct with the help of b...
Supply, Installation, Testing and Commissioning of Butterfly Damper GI Constructed Single Flap with round flange on one side and 10mm grove on other side for fixing of flexible duct with the help of b...
Supply, Installation, Testing and Commissioning of Butterfly Damper GI Constructed Single Flap with round flange on one side and 10mm grove on other side for fixing of flexible duct with the help of b...
Supply, Installation, Testing and Commissioning of Factory fabricated single skin flexible duct (For Ventilation) The length of the flexible duct considered as per measured GFC drawings. The flexible ...
Supply, Installation, Testing and Commissioning of Extruded Aluminium Powder coated Grills for supply and return air linear fixed bar grilles, horizontal fixed bars, slimline blade, (3mm nominal thick...
Supply, Installation, Testing and Commissioning of Aluminium Collar Damper of opposed blade type aluminum extruded construction black anodized dampers. (Used in supplay air) ---- ETC AS PER THE DIRECT...
Supply, Installation, Testing and Commissioning of Extruded Aluminum powder coated Exhaust air Disc valves/grille without Vol control dampers for Pantry. a) Note: Colour shall be as per the False ceil...
Supply, installation, testing and commissioning of Extruded Al. Powder coated Fresh air / Exhaust air louvers with slimline blade (3 mm nominal thickness) grille height 16 mm, blade pitch 12.5 mm and ...
Supply, Installation, Testing and Commissioning of Condensate CPVC drain piping with insulated with 6mm Nitrile rubber insulation including elbows, connectors, U traps, Yconnections and flexible tubin...
Supply, Installation, Testing and Commissioning of Condensate CPVC drain piping with insulated with 6mm Nitrile rubber insulation including elbows, connectors, U traps, Yconnections and flexible tubin...
Supply, Installation, Testing and Commissioning of Condensate CPVC drain piping with insulated with 6mm Nitrile rubber insulation including elbows, connectors, U traps, Yconnections and flexible tubin...
Supply, Installation, Testing and Commissioning of Drain Pumps for CHW/VRV/VRF/DX Type HiWall Units and Ceiling Mounted Units.
Mini Blanc Pumps (External) for HiWall units. (Max. flow 12L/h and Head i...
Supply, Installation, Testing and Commissioning of Drain Pumps for CHW/VRV/VRF/DX Type HiWall Units and Ceiling Mounted Units.
Max HiFlow (Above 5.0 TR CSU/FCU) (Max. flow 550L/h and Head is 5Met) ---...
Supply, Installation, Testing and Commissioning of Duct type Strip heater (For Customized AHU's) with nessacery electrical wiring and connection. Incoming power supply from respactive Starter panel. (...
Supply, Installation, Testing and Commissioning of Duct type Strip heater (For Customized AHU's) with nessacery electrical wiring and connection. Incoming power supply from respactive Starter panel. (...
Supply, Installation, Testing and Commissioning of Magnehelic Differential Pressure Gages (IP67 enclosure) to Indicate Positive, Negative or Differential, Accurate within 1%. Note: Pressures must be l...
Supply, Installation, Testing and Commissioning of Duct Type Temperature and RH Sensors (IP40 enclosure) (Immersion depth : 230 mm) with all mounting accessories to measure the Return Air temperatures...
Supply, Installation, Testing and Commissioning of Room Type Temperature and RH Digital Sensors (Thermostats) with all mounting accessories to measure the critical Room air temperatures. (Temperature ...
AUTO SEQUENTIAL CONTROL PANEL Supply and installation of Auto sequential control panel for AC units the panle should have the following features.
A/C units shall be able to restart automatically af...
Supply, installation, testing and commissioning of Electrical Power and Controle cabling for AC units, Ventilation and Pressurization fans units.Note :
a) Costing is inclusive of necessary supports a...
Supply, installation, testing and commissioning of Electrical Power and Controle cabling for VRV / VRF Indoor and Outdoor units.Note :
a) Costing is inclusive of necessary supports and supporting rod...
Supply, installation, testing and commissioning of Electrical Power and Controle cabling for VRV / VRF Indoor and Outdoor units.Note :
a) Costing is inclusive of necessary supports and supporting rod...
Supply, installation, testing and commissioning of Electrical Power and Controle cabling for VRV / VRF Indoor and Outdoor units.Note :
a) Costing is inclusive of necessary supports and supporting rod...
3 core 2.5 sq.mm Flexible Crosslinked polyethylene (XLPE) Insulated Armoured copper cables (FRLS) Power cable with saddles/supports and PVC conduits to connect Ele (5 AmpsPlug top and socket) feedar t...
2 core 1.5 sq.mm Flexible Crosslinked polyethylene (XLPE) Insulated Armoured copper cables (FRLS) communication / looping cable with saddles/supports and PVC conduits to connect VRF/VRV indoor units t...
Supply and installation of Hot dippeed Galvanised bolted Standard/Customized Perforated GI Cable Tray.
Used for Refrigerant copper piping, Fresh air piping, power and control cables and etc..
MEDICAL GAS PIPELINE SYSTEM (MGPS)
Oxygen Manifold: Main 20+20 Cylinder Oxygen Manifold Should be suitable to withstand a pressure of 140 Kg/Cm2 and above along with high pressure copper annealed tail pipes with end Brass...
Micro process based Automatic High flow upto 2200 ltr per min Oxygen Control Panel.
3 Source Control Panel (Fully automatic changeover panel)
Working Pressure from the oxygen concentrator plant 4.1 kg...
Oxygen Manifold System : Emergency
The Control panel shall be of fully integrated type with all safety futures inbuilt for high pressure and high flow upto 2200 ltrs / min Oxygen system. 4+4 Cylinder ...
Nitrous Oxide Manifold: Main4+4 Cylinder Nitrous Oxide Manifold Should be suitable withstand a pressure of 140 Kg/Cm2and above, along with high pressure copper annealed tail pipes with end Brass adapt...
Nitrous Oxide manifold: Emergency. An Emergency nitrous oxide manifold Should be consisting of 2 + 2 nos of service point with heavy duty regulator connection set. Manifold should be tested (hydraulic...
VACUUM SUPPLY SYSTEM: The pump installation shall be Duplex system consisting of Two identical rotary vane pumps each of which shall be capable of independently producing designed systems flow rate. ...
VACUUM BACTERIAL FILTRATION, Medical Vacuum filters are used for removal of bacteria & other contamination from the suction side of vacuum pumps, preventing infection of pump and the atmosphere. Thes...
Compressed Air System: System For Medical use
Type : Reciprocating, Air cooled, Oil/ Grease
Capacity of Piston Displacement : 52.7 cfm 1620 Lpm ...
Duplex Medical Air Dryer System ( Breathing Air System) 60 CFM Air Dryer Min Working Pressure should be 4 bar, Rated Inlet Pressure should be 7 bar Max Working Pressure should be 16 bar Supply Voltag...
COMPRESSED AIR BREATHING FILTRATION SYSTEM-3 STAGE The filters Should have maximum contaminant removal efficiency with minimum pressure drop. The filtration system should conform to breathing air filt...
Copper Fittings: Supply, Installation, Testing and Commissioning: All copper pipes should be Solid drawn, seamless, de-oxidized, non arsenical, half hard, tempered and degreased materials con...
Copper Fittings: Supply, Installation, Testing and Commissioning: All copper pipes should be Solid drawn, seamless, de-oxidized, non arsenical, half hard, tempered and degreased materials con...
Copper Fittings: Supply, Installation, Testing and Commissioning: All copper pipes should be Solid drawn, seamless, de-oxidized, non arsenical, half hard, tempered and degreased materials con...
Copper Fittings: Supply, Installation, Testing and Commissioning: All copper pipes should be Solid drawn, seamless, de-oxidized, non arsenical, half hard, tempered and degreased materials con...
Copper Fittings: Supply, Installation, Testing and Commissioning: All copper pipes should be Solid drawn, seamless, de-oxidized, non arsenical, half hard, tempered and degreased materials con...
Copper Fittings: Supply, Installation, Testing and Commissioning: All copper pipes should be Solid drawn, seamless, de-oxidized, non arsenical, half hard, tempered and degreased materials con...
Copper Fittings: Supply, Installation, Testing and Commissioning: All copper pipes should be Solid drawn, seamless, de-oxidized, non arsenical, half hard, tempered and degreased materials con...
Copper Fittings: Supply, Installation, Testing and Commissioning: All copper pipes should be Solid drawn, seamless, de-oxidized, non arsenical, half hard, tempered and degreased materials con...
Copper Fittings: Supply, Installation, Testing and Commissioning: All copper pipes should be Solid drawn, seamless, de-oxidized, non arsenical, half hard, tempered and degreased materials con...
Should have terminated properly Double locking DIN type valves which have a p...
Should have terminated properly Double locking DIN type valves which have a p...
Should have terminated properly Double locking DIN type valves which have a p...
Should have terminated properly Double locking DIN type valves which have a p...
ACCESSORIES ALONG WITH CALIBRATION CERTIFICATES.
Oxygen Flow meter with Humidifier Bottle:
Flow meter should be Back pressure Compensated.
Flow meter should be accurate gas flow meas...
Single piece wall mounted suction collection & regulation unit. With jar capacity of 600ml each shall be provided at each of the bed side. Jars are should be made of auto-clavable materials. T...
ISOLATION VALVES: Should be 90 degree turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for ...
ISOLATION VALVES: Should be 90 degree turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for ...
ISOLATION VALVES: Should be 90 degree turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for ...
ISOLATION VALVES: Should be 90 degree turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for ...
ISOLATION VALVES: Should be 90 degree turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for ...
ISOLATION VALVES: Should be 90 degree turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for ...
ISOLATION VALVES: Should be 90 degree turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for ...
ISOLATION VALVES: Should be 90 degree turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for ...
Zonal Valve box five Gas services An Zonal area valve box should have bellow spec. Wall mounted M.S. box with powder coated & lockable, front glass mounting easily visible & using imported brass body...
Zonal Valve box Three Gas services An Zonal area valve box should have bellow spec. Wall mounted M.S. box with powder coated & lockable,Front glass mounting easily visible & using import...
Zonal Valve box Two Gas services An Zonal area valve box should have bellow spec. Wall mounted M.S. box with powder coated & lockable, front glass mounting easily visible & using im...
Digital Area Alarm for five Gas Systems. Micro processor controlled Area Gas alarm panel five Lines, Should audio- visual alarms for each gas used on the floor and come fitted with test and mute butto...
Digital Area Alarm for Three Gas Systems. Micro processor controlled Area Gas alarm panel Three Lines, Should audio- visual alarms for each gas used on the floor and come fitted with test and mute ...
Digital Area Alarm for Two Gas Systems. Micro processor controlled Area Gas alarm panel five Lines, Should audio- visual alarms for each gas used on the floor and come fitted with test and mute bu...
Oxygen consumption monitor With Online Purity Indicator( Imported ) Specifications for Oxygen consumption monitor Microprocessor based device should be a stand-alone monitor to record the am...
Bed Headed Panel and Railing.1.5 Meter. Double railing Bed head panels Should have bellow Specifications Accessories
1. IV Stand Extendable type with aluminium slider.
EXTERNAL ELECTRICAL SYSTEM
Supply of DP Structure using RCC Pole 9 m Long, 145 Kg WL (Including Cost of Poles). ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
fixing of DP Structure using RCC Pole 9 m Long, 145 Kg WL (Including Cost of Poles). ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of 11 kV, 45 KN Polymeric Insulator. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Guy Set Complete with Nos. 15 Strain Insulator & Concreting materials.Supply of Guy Clamp GI. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Turn Buckle (GI)(Dwg Nos. BESCOM/GM/QS&S/07 Dtd 24.11.2018). ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Anchor Rod using 12 mm rounds/Guy Rod GI. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Nos. 15 Strain Insulator. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Guy Wire & GI Wire as per IS 2141.7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Digging of Pit for GUY SET.Ordinary Soil. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) ---- E...
supply of Spiral Earth Electrode. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing Spiral Earth Electrode type earthing. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Caution/Danger Board. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
fixing of Caution/Danger Board. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Anti Climbing Device (12 m GI Barbed Wire). ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
fixing of Anti Climbing Device (12 m GI Barbed Wire). ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of 11 kV, 400 Amps Double Break GOS(Dwg Nos. BESCOM/GM/QS&S/22 Dtd 24.11.2018). ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Fixing of GOS including wiring (11 kV Double Break 400 Amps). ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Single H Frame without Transformer Seating and Seating angle support cross arm for 11 m Spun Pole for 63/100/250/500kVA (OH Line) GI. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Erection of H Frame.for mounting GOS. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of 11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
11kV, 3x240 Sqmm XLPE UG Cable ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Cable termination kit Indoor HS Type Suitable for 3x240 Sqmm Cable ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Cable covering tiles 250x125x40mm ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Artificial/Manufacture Sand (Extracted from Vol 1, PWD SR Sl Nos. 62) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
RCC humepipes 2000mm long 150mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Collars for RCC hume pipes ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
GI Pipe, 100 mm Dia for drain crossing, cable raising etc., (Extracted from Vol 5, BWSSB SR Item Nos. 177) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Route and Joint Indicating Stones ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol 1, PWD SR Sl Nos. 1.17.1) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Laying of cable in trench ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Refilling and consolidation (Extracted from Vol 1, PWD SR Sl Nos. 1.10) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Making of cable termination ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Covering the cables with tiles ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Spreading Sand and forming with Sand round the cable ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Laying of RCC humepipes 2000mm long and 150mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Laying of GI pipe 150mm dia ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Fixing of Route and Joint indicating stones ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS 7098 (Part 2) Armouring wires dia and Resistivity as per IS 3975. 95 Sqmm, (54 GI Wires 2....
Supply of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable.3Cx95sqmm indoor. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3Cx95sqmm outdoor. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Cable covering tiles 250x125x40mm.. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of River sand. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of RCC humepipes 2000mm long 150mm dia. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Collars for RCC hume pipes. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of GI pipe 150mm dia. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of Route and Joint indicating stones with MS Anchor rod. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Earth work excavation for cable treanch of 0.5 to 0.75m Width and Depth up to 1m .BESCOM SR PART 4,PAGE 8,ITEAM Nos 29.02 Earth work excavation for pipelines/cables by Manual means upto 600 mm trenc...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.3x95 to 150 Sqmm. ---- ETC AS PER THE DIRECTION OF ENGINEER IN C...
Retailing the cable trenches with selected availble earth from trench excavation including watering,Consolidation in layers of 15Cm thickness including depositing of the surplus earth with a lead of 2...
Making and Fixing pot head for HT Cable only.Heat shrinkable Type Terminations.3x95 to 3x150 Sqmm. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Covering the cables with tiles. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Spreading and forming with sand alround the cable to a depth of 75mm and width of 500mm . ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Laying and Jointing the pipes (100 150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete.RCC Pipe.. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete.. ---- ETC AS ...
Fixing of Route Joint Indicating Slab.. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply of 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 Nos of Meters for 3 Phase 4 Wi...
Supply, installation, erection, testing and commissioning of DAS Compatible HT Panel 1 Nos.of 11kV 350 MVA 630A drawout type,manually operated VCB 's as incomer &2 Noss. 11kV 350MVA 630A drawout type...
Erection of HT metering Cubicle on Platform. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
Construction of platform (1.5x1.5x1.2) m in size stone,cement concrete for erection of Metering cubical,Transformer and Load break switch: Excavation of (1.5x1.5x1) mt pit for foundation providing and...
Distribution Transformer 3 Phase, 11kV/433V Stacked CRGO Core with Oil as per IS 1180 (Part 1): 2014.21. 500 kVA, Aluminium Wdg, Star 2 (5 Star).CABLE ENTRY TYPE with buchholz relay,marshalling bo...
Erection of 300 500 kVA Transformer. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
RMU 3 Way, (2OD + 1VL,) One Incomer + One Breakers + One outgoing, 350 MVA, 630 Amps ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Bed Concreting with CC 1:2:4 [M 15] Using 20mm Nosminal size graded crushed coarse aggregates (Extracted from Item Nos. 2.1.6 of KPWD SR 2023 24, Volume 1) ---- ETC AS PER THE DIRECTION OF ENGINEER ...
Foundation with CC 1:2:4 [M 15] Using 20mm Nosminal size graded crushed coarse aggregates (Extracted from Item Nos. 2.1.6 of KPWD SR 2023 24, Volume 1) ---- ETC AS PER THE DIRECTION OF ENGINEER IN C...
Providing Reinforecement TMT Fe 550/550 D (Extracted from SL Nos. 69 of KPWD SR 2023 24, Volume 1) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing Plinth with CC 1:2:4 on the Stone Masonary [M 15] Using 20mm Nosminal size graded crushed coarse aggregates (Extracted from Item Nos. 2.1.6 of KPWD SR 2023 24, Volume 1) ---- ETC AS PER TH...
Construction of Stone Masonary (Extracted from Sl Nos. 5.4 of KPWD SR 2023 24, Volume 3) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., complete. (Extracted from SL Nos. 69 of KPWD SR 2023 24, Volume 1) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARG...
Rod type earthing with 40 mm Dia, 3 m long MS rod as per specification & drawing including digging of pit & fixing ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., ---- ETC AS PER THE DIRECTION OF ENGINEER...
Earth Excavation for RMU Foundation depositing of earth on bank up to a lead of 50 m and with a lift up to 1.5 m ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 m long GI pipe with GI funnel with mesh and suitable size reducer fixed on...
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG Cu Wire...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 50X6mm GI strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600X600x3mm GI Plate ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40X6mm Copper strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600X600x3mm Copper plate ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply, installation, testing & commissioning of all in one Solar street light complete with Photovoltaic module, 6m GI Pole, 30W LED hybrid light fixture, lithium LifePO4 battery, PIR sensor with bui...
UPS, CCTV, DG SET, TELEPHONE NETWORKING, NURSE CALLING SYSTEM, LIFT WORKS
Supply, installation, testing and commissioning of 100 KVA(OPT 3X30 KVA), For 30 minute backup, min. 80000 VAH (3 phase input and 3 phase output)UPS with isolation transformer and battery for backup, ...
IP DOME CAMERASSupplying, installation, testing and commissioning of SITC of 1/2.8x2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm-13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[colo...
IP BULLET CAMERASSupplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm-13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[co...
30 x Zoom WDR PTZ 4 MP IP Camera MAGE SENSOR 1 by 3 in CMOS OPTICAL ZOOM 30x DIGITAL ZOOM 16x NUMBER OF PIXELS HxV 2592 1520 4MP WDR 120 dB S by N RATIO Greater than 55dB MINIMUM ILLUMINATION Color 0....
Supplying, installation, testing and commissioning of SITC of complete 64 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up ...
Supply and Installation of 8 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply and Installation of 16 Port L2 Managed Poe Switch The rate shall include all mounting accessories complete as required ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply and Installation of 55"LED Monitor The rate shall include all mounting accessories complete as required ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and drawing UTPCAT 6E LAN cable (85/11.1) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and Fixing of Power strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying of shelf ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and Fixing of castor wheels to the Shelf (set of 4) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and Fixing of Fan ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying andfixing of 1mtr cat 6 Patch Cable ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and Fixing of patch panel for LAN cabling 24 port 10/100/1000 patch panel ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 9U with 650mm depth ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply, intallation, testing and Commissioning of Media Converter ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting...
Supplying heavy gauge PVC conduit pipe 32mm dia 2mm thick thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. ...
Supplying, installing, testing, and commissioning of PRIME Diesel Generator set with the following specifications. Power rating as per standard reference conditions as per BS 5514 ISO 3046 ISO 8528 an...
Supplying, installing, testing, and commissioning of PRIME Diesel Generator set with the following specifications. Power rating as per standard reference conditions as per BS 5514, ISO 3046, ISO 8528,...
Supply and installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary...
Supply and installing of DG set stack using angular structure, channel, necessary nut and bolt and all required accessories for erecting exhaust pipe from 2 nos DG set . The design of the stack with f...
Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, a...
Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, a...
Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,...
Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...
Suppiying and fixing of Shunt trip suitable for MCCB.CBCT ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage le...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross3 with Short cir...
PLC Control:Supply, Erection, testing and commissioning of Automatic syncronisation with load sharing,RPR,REF,MDM with suitable CT's,Hardware interlocking through Aux contactor with timers , UV and...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...
8 SWGCu Wire ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x6mm GI strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600 x 600 x 3 mm GI Plate ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.40x6mm Copper strip ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm Copper plate ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/ I.O. outlet ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Telephone socket ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and drawing UTPCAT 6E LAN cable (85/11.1) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying & Fixing of I/O Socket with back box Single I/O ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying & Fixing of switch mounting rack with power manager & Cable manager as per standard specification 9U with 450mm depth ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying & Fixing of switch mounting rack with power manager & Cable manager as per standard specification 24U with 650mm depth ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying fixing of Network Switches. 24 port 10/100/1000 Switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying fixing of Network Switches. 16 port 10/100/1000 Switch ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying & fixing of ..m. Cat 6Patch Cable. 1Mtr ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying & Fixing of Patch panel for Lan Cabling. 24 Port 10/100 /1000 Patch Panel ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying & Fixing of Patch panel for Lan Cabling. 16 Port 10/100/1000 patch panel ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 10 Pair ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 Pair ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 Pair ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 50 Pair ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.2Pair ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
EPABX:Supply,Installation,Testing & Commissioning of microprocessor based, state of the Art, Telephone PBX System , IP READY,based on Linux/GRUB compliant, integrated Software for multiTasking for H...
TELEPHONES Analog push button telephone with Caller ID, flash and radial ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Digital Executive phone with 3x16 / 2x24 character alpha etc., ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply, Installation, Testing and Commissioning of 6core OFC Armoured outdoor cable (SM) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting...
Supplying heavy gauge PVC conduit pipe 32mm dia 2mm thick thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. ...
42 U Network cum Server Rack Assembly, Floor Mounting, made of Aluminium Channels equivalent to Euro Rack System with side and rear panels made of Powder Coated sheet steel, front transparent persple...
Supplying and drawing PVC flexible 20 pair telepone unarmoured tinned copper cable. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and drawing PVC flexible 50 pair telepone unarmoured tinned copper cable. ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supply, Installation, Testing and Commissioning of DUAL CORE 3.0 GHz processor with 5 MB CACHE / 1333 MHz FSB; 2 GB MEMORY / 250 GB SATA HARD DISK / GIGABIT ETHERNET ON BOARD / DVRROM / KEYBOARD / MO...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supply, installation, testing and commissioning of 'The Bedside call unit shall be mounted on the head boards where there are patient headboards or on the walls where it can be implemented within th...
Supply, installation, testing and commissioning of PATIENT HANDSET BASIC.This Handset will be used in the locations that are connected to the system by a zone controller.'It Shall be ergonomically s...
Supply, installation, testing and commissioning of CODE BLIE CALL UNIT;The Code Blue Call Unit shall be mounted on headboards where there are patient headboards or on the walls where it can be imple...
Supply, installation, testing and commissioning of PULLCORD CALL UNIT(WC\Bathroom)The Pullcord call unit has 2 input\output ports for RJ45 Ending for cabling in a chain with overdoor lights and othe...
Supply, installation, testing and commissioning of 'Over Door Light shall use environmentally friendly LEDs.'It shall consist of Red, Green, Blue, white, Pink Colored Warning Light.'In Normal Condi...
Supply, installation, testing and commissioning of 'IP BASED NURSE CALL SYSTEM Supply, Installation, testing and commissioning of the IP based Nurse Call System based on the following components inc...
Supply, installation, testing and commissioning of IP ZONE CONTROLLER This is the main node device used to network the Nurse call system devices to each other for areas are not private or semiprivat...
Supply, installation, testing and commissioning of Data Base Server\IP System Controller with Software & Hardawre. The IP System Controller shall be planned as a Structure to Operate Without Interr...
Supplying and drawing UTPCAT 6E LAN cable (85/11.1) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/ I.O. outlet ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall12...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Design, supplying, erecting testing and commissioning of passenger/ Bedcumpassenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room...
Design, supplying, erecting testing and commissioning of passenger/ Bedcumpassenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room...
Design, supplying, erecting testing and commissioning of passenger/ Bedcumpassenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Main Entrance Sign Board- 30'...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Emergency Entry Sign board-20...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Near Reception-10'X 20' ---- ...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Lower Ground Floor-4'X14' ---...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Ground floor-4'X14' ---- ETC ...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. First fioor-4'X14' ---- ETC A...
SSITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Second floor-4'X14' ---- ETC ...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Third floor-4'X14' ---- ETC A...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Fourth floor-4'X14' ---- ETC ...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Fifth floor-4'X14' ---- ETC A...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Room signages-45 cm X 15 cm L...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Room signages-45 cm X 15 cm G...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Room signages-45 cm X 15 cm F...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Room signages-45 cm X 15 cm S...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Room signages-45 cm X 15 cm T...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Room signages-45 cm X 15 cm F...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Room signages-45 cm X 15 cm F...
SITC Entrance LED Name board signages in Kannada and English to suit Entrance Portico as per specifications and as per directions of the Engineer in charge of the work. Room signages-45 cm X 15 cm T...
Clearing of land by cutting of thick and sparse growth plants(0.25 mt thickness plants and clearing of bushes along with roots( throwing away to 1.5mtr height and 50 mtr Far) ---- ETC AS PER THE DIRE...
Digging pits of size 0.75 x 0.75x 0.75m, filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand (0.035cum) FYM (0.070cum) Red earth (0.105 cum) and planting of wel...
DSR HOR -7.5Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge ---- ETC AS PER THE DIRECTION OF ENGINEER I...
DSR HOR -7.16Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge ---- ETC AS PER THE DIRECTION OF ENGINEE...
DSR HOR -7.87Providing and stacking of Tectona grandis (Teak)/honne of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. ---- ETC AS PER THE DIRECTION OF ENGI...
DSR HOR -8.10Providing and stacking of Cassia biflora/kakke of height 90-105 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge ---- ETC AS PER THE DIRECTION OF E...
Lawn development : SCRAPPING AND REMOVING TOP SOIL :-Scrapping the area by removing 0.15m soil and removing of unwanted plants,grass along with roots.25km initial transport, including lead, lift loadi...
Lawn development : 1 ST DIGGING:-Digging of the area for developing lawn including removing weeds, debris if any and breaking of clumps, watering etc. (1x1x0.45mt) ---- ETC AS PER THE DIRECTION OF ENG...
Lawn development : 2 ND DIGGING:- Digging of soil by removing grass etc if any and levelling of the soil etc .. (1x1x0.45mt) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Lawn development : procurement of quality red earth/soil and heap around pit (1x1x0.15mt) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Lawn development : Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio.mixing and spreadingthe mixture to 7.50cm thickness wherever required Red soil ---- ETC AS PER THE DIRECTION OF ENGINEE...
Lawn development : Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio.mixing and spreadingthe mixture to 7.50cm thickness wherever required Farm Yard manure ---- ETC AS PER THE DIRECTION OF...
Lawn development : Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio.mixing and spreadingthe mixture to 7.50cm thickness wherever required Sand ---- ETC AS PER THE DIRECTION OF ENGINEER IN...
Procurement of quality lawn grass Bermuda Grass-Turf ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Procurement of quality lawn grass Korean Grass-Turf ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Procurement of quality lawn grass Ooty kiku Grass-Turf ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers,digging, levelling , and dibbling with lawn grass at a spacing of 5cm x5cm& as per the direction of the Offi...
Lawn development cost Bermuda Grass-Turf ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Lawn development cost Korean Grass-Turf ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Lawn development cost Ooty kiku Grass-Turf ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
WORK TO BE UNDER TAKEN DURING MAINTENANCE:- Upto 8000.0 m2 (2.0 Acres) ---- ETC AS PER THE DIRECTION OF ENGINEER IN CHARGE
Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 &nIS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...
Download all tender documents and submit your bid