Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹37.2 L+₹2.2 L (6.30%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹37.4 L+₹2.5 L (7.03%)Rejected-Finance H NO 1346 SECTOR 13 P HISAR 125005 HARYANA | HISAR | HISAR | HARYANA | 125005 | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹49.7 L+₹14.7 L (42.1%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder | |
| 5 | L5₹49.9 L+₹15.0 L (42.8%)Rejected-Finance R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | L5 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
16 Apr 2024, 6:00 pmClosed
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
CERTAIN REPAIRS REPLACEMENT OF INTERLOCKING TILE CHEQUERED TILE HARDSTANDING RETAINING WALLS FENCING INCLUDING PATHWAY AT SECTOR D UNDER AGE BR I OF GE 865 EWS
2024_MES_647288_1
865/EWS(NIT-30)/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹96,000
Yes
19 Jun 2024
20 Mar 2024
23 Apr 2024
20 Mar 2024
16 Apr 2024
3 Apr 2024
Amount
Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed
M&L for 15mm thick rendering on fair faces of brick works finished even and smooth with water proofing compound 3% of cement without using extra cement in cement mortar 1: 4 complete all as specified and as directed. Note :- WPC should be measured and paid seperately
Raised pointing to random or polygonal rubble, uncoursed block walling in CM 1:4 complete all as specified and as directed.
Supply only integral liquid water proofing compound complete all as specified and directed.
M&L for preperation of new plastered wall surface of any description and applayng two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.
M&L for preperation of old plastered wall surface of any description and applayng one coat of cement based paint complete all as specified and as directed.
Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level and removing demolised material out of Military station, complete all as specified and as directed..
Demolition of cement concrete in any description and any position not otherwise specifically provided for, complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and as directed.
Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bar or grating , complete all as specified and as directed.
Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and directed
Demolition of stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc and removing demolised material out of Military station all as specified and as directed
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 all as Spfd
Descriptioin all as per above item Ser No 14.00 but except blocks.
M&L random rubble stone masonary well bonded bedded solidily hearted in CM 1:6.
Descriptioin all as per above item Ser No 16.00 but except stones.
M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc..
M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 80mm thickness M-40 grade complete all as specified and as directed by Engr-in-Charge..
M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge..
M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed by Engr-in-Charge..
M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc..
M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.
Dismantling of Asbestos cement (corrugated semicorrugated etc) sheets in roof coverings complete all as specified and as directed
S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275.
Descriptioin all as per above item Ser No 25.00 above but except sheeting.
S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified
Descriptioin all as per above item Ser No 27.00 above but except sheeting any thickness.
Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed
Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.(Framed work) complete all as specified and as directed
M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.
M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.
M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed
M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in wall panelling, complete all as specified and as directed.
M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in ceiling panelling, complete all as specified and as directed.
M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler o new surface with two or more coats complete all as specified and as directed.
M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.
Description all as per above item No 37.00 but on ceiling complete all as specified and as directed
M & L for 100 mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in floor of hard standing finished even and smooth with out using extra cement complete all as specified and as directed.
M&L Hardcore with broken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface complete all as specified and as directed.
M&L PCC 1:3:6 type C-2 (using 20mm graded stone agg) 75mm thick sub base of floor etc complete all as specified and as directed.
Supply only plastic dividing strips,1.5 mm thick and 38mm wide inserted in position confirm to design complete all as specified and as directed.
M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in floor surface of hard standing complete all as specified and as directed.
M&l for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.
M&L for preperation of new surface on Brick,Concrete,Wall and Stone surface of any description descripton and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.
M&L Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing boltsposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
M & L for Excavating in post holes in so(or similar holes) each n.exc 0.5 cum in hard/dense soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm. complete all as specified and as directed.
M&L for PCC type D-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc.complete all as specified and as directed.
Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire. complete all as specified and as directed.
Supply only chain link MS galvanised fencing of size complete all as specified and as directed.
M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate in CM 1:4 for coping ,mass concrete complete all as specified and as directed.
M&L cement concrete Type C-2,1:3:6 (40mm graded aggregate)in Surface channels and drains complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and as directed. (Inner girth oly measured)
Extra for forming fair finished drain or channel 55cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc. complete all as specified and as directed. (Inner girth oly measured)
M&L for precast RCC (1:1.5:3), nominal mix, type A-1 uising 20 mm graded stone aggregate as in cover slab of drain set in cm 1:4, complete all as specified and as directed . Note:- Reinforcement shall be measured and paid seperately
Mild steel TMT bars10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips . complete all as specified and as directed.
S&F mild steel screw bolt 5 to 10 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one waher and hexagonal nut length exc 5cm but not exc 10 cm long. complete all as specified and as directed.
S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc, to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel,) sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complet, Fe 410-W (Gde-E-250) quality A. complete all as specified and as directed.
M&L preparation of newly or previously untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.
Rampal Singh Contractor
Horizon Construction Company
M/S MUNEER HASSAN AKHON
SONAM ANGCHOK
M/S RIGDOL CONSTRUCTION
M/S MOHD KARIM
M/S STANZIN NOBROO
M/S JAVED CONSTRUCTION COMPANY
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .