8327 DAY TO DAY WELCOME MAINT FOR INTERNAL EM SERVICES FOR CERTAIN ACCN AND REPAIR REPLACEMENT OF INTERNAL ELECTRIC WIRING FITTINGS FIXTURES AND CONNECTED ELECTRICAL ITEMS AT MD ACCN OTM ACCN AND EM INSTALLATIONS IN ASI AIPT OLD NDA AREAS AND

Amount

Taking down old unserviceable point wiring( light/fan/socket/power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, pendants,regulators etc and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified.

Taking down old U/S switches, sockets, ceiling roses, pendants,regulators, bell push, call bells etc and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified.

Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified.

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in and including PVC casing caping 25mm wide/PVC Surface conduits of appropriate size as per specification as requirerd at site and as directed of heavy duty ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.

(a) One light/fan point controlled by one, One-way switch complete all as specified and directed.

(b) Two Light point controlled by one, One-way switch complete all as specified and directed.

(c) Four Light point controlled by one, One-way switch complete all as specified and directed.

(d) One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

(e) One 3 pin 5 Amps socket outlet point on same board complete all as specified.

(f) One bell/buzer point controlled by one bell push complete all as specified.

(g) One light point controlled by two 2-way switches complete all as specified.

All as per item no. 04 above but with 2.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 Amps socket outlet point on independent board.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked, in and including PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with Modular sunken boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any extra cost to department. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost to deparment.

a) One light/fan point controlled by one, One-way switch complete all as specified

b) Two Light point controlled by one, One-way switch complete all as specified and directed.

c) Four Light point controlled by one, One-way switch complete all as specified and directed.

d) One 5 pin 5 Amp Socket outlet point on same board with other switches including earth wire.

e) One 5 pin 5 Amp Socket outlet point controlled by one switches on independent board complete all as specified.

f) One bell/buzer point controlled by one bell push complete all as specified.

g) One light point controlled by two 2-way switches complete all as specified.

All as per item no. 06 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any extra cost.

S & F modular switch 6A SP one - way 230V 1 module white/ ivory finish complete all as specified

S & F modular switch 6A SP Two - way 230V 1 module white/ ivory finish complete all as specified

S & F modular switch 16A SP one - way 230V white/ ivory 1 module ivory finish complete all as specified

S & F modular socket outlet 2/3 pin 6 Amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F modular socket outlet 2/3 pin 16 Amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F for Bell push, flush type, 5 Amp 1 module complete all as specified.

S&F bell electrical ding dong including hard PVC board ISI marked complete all as specified

S & F 240 V, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 Amp single pole MCB complete all as specified.

S&F ceiling rose surface type three terminals complete all as specified and directed.

S & F Modular type stepped electronic fan regulator 2 module all as specified & directed

Supply and fixing in repair of the following accessories :-

(a) White cover plate with frame, 2 module complete all as specified.

(b) White cover plate with frame, 3 module complete all as specified.

(c) White cover plate with frame, 4 module complete all as specified.

(d) White cover plate with frame, 6 module complete all as specified.

(e) White cover plate with frame, 8 module horizontal complete all as specified.

(f) White cover plate with frame, 12 module complete all as specified.

Supply and fixing in repairs PVC Modular box of following sizes :-

(a) White PVC Box of 2 module complete all as specified.

(b) White PVC Box of 3 module complete all as specified.

(c) White PVC Box of 4 module complete all as specified.

(d) White PVC Box of 6 module complete all as specified.

(e) White PVC Box of 8 module complete all as specified.

(f) White PVC Box of 12 module complete all as specified.

M & L for Sub main wiring with two single core 4 sqmm, 1100 volts grade, PVC insulated, stranded copper conductor FRLS-H cable with one run of continuous copper earth conductor of 4 sqmm and including PVC conduit and accessories of suitable size not less than 25mm dia including taking down old submain wiring complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any extra cost to department (ii) 3 runs of 4 Sqmm conductor and one run of PVC conduit min 25mm dia shall be measured as one unit RM length.)

M&L for Sub main wiring with 4 single core 6.00 sqmm 1100 volt grade, PVC insulated stranded copper conductor FRLS-H cable with one run of continuos coper earth conductor of 6 sqmm and including PVC conduit and accessories of suitable size not less than 32mm dia including taking down and submain wiring complete all as specified. Note : (i) Making good disturb surface will be done by contractor without any extra cost. (ii) 5 Run of 6 sqmm conductor and one run of PVC conduit shall be measured as one unit.

S&F LED light fitting surface and wall mounted LED batten with Aluminium housing & integrated electronic driver complete in all respect of 10W capicity confirming Cat Part No BCLSB 10 W NW of make - Bajaj or equivalent in other approved makes as given in Appx 'A' including talking down old unserviceable fitting and making good the disturbed surfaces complete all as directed.

Supply and fix LED Tube light fittings Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver 20 W LED complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector. Conforming to Cat Part No.ENDURALINEARNEOBS20WLED865SPCWH of Make : Havells or Equivalant in other approved makes as given in Appx 'A' including taking down old unserviceable fittings and making good the disturbed surfaces complete all as directed.

S & F LED batten with opal diffuser, IP 20 and in Built Battery Back up Tube light fittings Surface and wall mounted integrated electronic driver 20 W LED complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size/length from ceiling rose to connector. Conforming to Cat Part No. LED Z INVERTER BATTEN 20 W CDL of Make BAJAJ or Equivalant in other approved makes as given in Appx 'A' including taking down old unserviceable fitting and making good the disturbed surfaces complete all as directed

S & F LED light fittings 2'x2' of capacity 28 to 30 watts environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements complete all as specified. Make:-Havells Cat part No. PLUTONEO2X2PLR28WLED840S or equivalent in other approved makes as given in Appx 'A' including taking down old unserviceable fittings and making good the disturbed surfaces complete all as directed

S & F LED flood light 120 W flood light luminaire with ultra high sleek, light weight with secondary optics made of pressure die-cast housings with toughned glass and individual high power LEDs with secondary optics IP 66 rating alongwith connected accessories complete all as specified. Make :Bajaj Cat Part No : PRAZE F 144L WH NB-A5 TG SD or equivalent in other approved makes as given in Appx 'A' including taking down old unserviceable fittings etc and making good the disturbed surfaces complete all as directed

S & F round recessed mounted AL die - cast LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation of 15W LED downlighter of white/neutral white 6500K color temperature etc. prewired and all accessories complete all as specified and directed Make - Cat part No. BZSLO nxt 15L LED WH SD of Bajaj or equivalent in other approved makes as given in Appx 'A' including taking down old unserviceable fittings etc and making good the disturbed surfaces complete all as directed

S&F LED security light of luminaries 30 watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. prewired Conforming to Bajaj Cat Part No. ENXT P 30L WH PO PC SD or equivalent in other approved makes as given in Appx 'A' including taking down old unserviceable fittings etc and making good the disturbed surfaces all as directed.

S&F LED security/Street light with PDC housing, IP 66 and in built battery back up with auto On/Off and dimming option in replacement of luminaries 30 watt complete with all accessories and mounting bracket of suitable size including clamps, nut bolts etc. prewired in approved makes as given in Appx 'A' including taking down old unserviceable fittings and making good the disturbed surfaces complete all as directed

S&F LED filament bulb of cap 4W thread type suitable as per site requirement all as directed including taking down old unserviceable bulb complete all as directed

Supply & fix electronic driver suitable for 2'x2' LED light fitting 28/36 Watt system power ISI Marked including taking down old unserviceable driver.

Supply & fix electronic driver suitable for round LED light fitting 15/18 Watt system power ISI Marked including taking down old unserviceable driver.

Supply & fix electronic driver suitable for LED light fitting 30 Watt system power ISI Marked including taking down old unserviceable driver.

S&F MCB TPN DB 4 way double door with 200 Amps rated busbar 415 V, all as specified.

S&F MCB SPN DB 8 way, double door, with 200 Amp rated busbar 240 V, all as specified.

S&F MCB SPN DB 4 way, double door, with 200 Amp rated busbar 240 V, SPN all as specified.

S&F vertical 4 way TPN DB double door, recess mounted/wall mounted, 3 pole V-Tec of 100A rating & 16KA breaking capacity MCCB as incomer and outgoing MCB SP/SPN/TP, MCCB's is to be pre-fitted including taking down old MCB DB all as specified. (Note : (i) Empty space shall be covered by blanking plate and connecting with lugs without any extra cost to department (ii) Rate quoted by contractors shall be demed to be including of MCCB/ MCB/ SP/SPN/TPN of required braking capacity)

S & F in replacement MCCB 100Amps, 16KA, TP 415 Volts with adjustable thermal and fixed magnetic setting with including cable entry arrangements, lugs, glands etc and fixing arrangements such as fastener, nuts,bolts complete.

S & F in replacement MCB Single pole rated capacity 6 to 32 Amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

S & F in replacement MCB double pole of rated capacity 32 Amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F in replacement MCB four pole of rated capacity 40/63 Amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, one twin core cable flat or circular of size 10.0 sqmm all including PVC tags/Clips and fixing hardwares complete all as specified and directed.

S & F in replacement single pointed air termination aluminium rod 12mm dia 300mm long complete all as specified and directed.

S & F in replacement Aluminium strip 25mm x 3 mm with saddles and fixing screws etc for roof conductors and down conductors above ground including resin/porcelein insulators complete all as specified and directed.

S & F in replacement of earth continuity conductor or main earthing lead fixed on wall or buried in ground or any other indicated situation for loop earthing etc as required of size 32 x 6mm GI strip complete all as specified and directed.

S & lay in replacement G.I. Tubing light grade 40 mm bore for support to termination rod laid under plinths/floors or fixed on walls including M.S. F.I. clamps with necessary bolts nuts and washers etc. complete all as specified and directed.

M & L in replacement PCC Block 1:2:4 type B1 of size 30 x 30 x 30 cm for holding air termination rod and GI tubing including hold fast, fastner etc. complete on the roof of building all as specified

M & L in replacement for chemical earthing with galvanised steel electrode 3.00 mtr long with ground enhancing black fill compound all including boring installation transportation earth work testing soil condition connected to and incl GI strip 32x6mm and GI pipe 40 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment and including PVC cover incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth strip 32x6mm and protection pipe beyond 7.5m will be measured and paid separately)

M & L in replacement earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

Sunhari Electricals

Chaulya Enterprises

M/s Asrani and sons

ANUSHKA BUILDERS