REPAIR TO INTERNAL WATER SUPPLY AND PLUMBING UNDER GE(NORTH) BIKANER AT MIL STATION BIKANER

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water etc.

Dismantling PVC/ cast iron pipes fixed to walls or laid in trenches in any position.

Dismantling timber scantling under 40 sqcm in section

Dismantling existing tanks, setting aside (or lowering if required) for repairs , cleaning ete. and hoisting if requeired reconnecting and refixing in position of capacity n.execeeding 250 ltrs and removing to stores, all as specified.

Dismantling existing tanks, setting aside (or lowering if required)for repairs , cleaning ete. and hoisting if requeired reconnecting and refixing in position of capacity execeeding 250 Ltrs and not exceeding 500 litres and removing to stores, all as specified.

Dismantling existing tanks, setting aside (or lowering if required)for repairs , cleaning ete. and hoisting if requeired reconnecting and refixing in position of capacity execeeding 500 ltrs and not exceeding 1000 litres and removing to stores, all as specified.

Dismantling Stone slabs and tiles of any description or thickness in roof ,floors, aprons laid in cement mortar etc.

Taking up or down steel tubing 15mm bore including cleaning for refixing or removal to store.

Taking up or down steel tubing 20mm bore including cleaning for refixing or removal to store.

Taking up or down steel tubing 25mm bore including cleaning for refixing or removal to store.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F PVC tank lid for 500 ltrs capacity including all locking arrandements , nuts bolts etc for fixing complete all as spfd and directed by Eng-in-charge. (Note :- Cover shall be of folding screening type as required at site.)

S&F PVC tank lid for 1000 ltrs capacity including all locking arrandements , nuts bolts etc for fixing complete all as spfd and directed by Eng-in-charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, including disinfecting with bleaching powder etc.removing all scale and dirt etc from tanks and from mouths of circulating pipes,changing of nipples and unions of appropriote size to be provided and hoisting if required reconnecting and re-fixing in position including writing "date of cleaning" and next due date in bold capital letters exc 4 cm in height ,capacity of tanks exc. 250 Ltrs but not exc. 500 Ltrs complete all as specified and directed by Engr-in-charge) (Date of cleaning has to be marked)

All as per sl item No.16 above but 1000 ltrs.

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) Double layered ISI marked hoisted and fixed in position all as specified in SSR Part-I of capacity 250 litres including all accessories, all as specified.(Note : Tank shall be provided only having Cover to tank shall be of Thread mode). (Note : Make shall be Engraved and test certificate shall be provided before submitting payment )

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) Double layered ISI marked hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories, all as specified.

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) 3 layered ISI marked hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories, all as specified.(Note : Make shall be Engraved and test certificate shall be provided before submitting payment )

S&F GI Tee 15 bore as in repairs

S&F GI Tee 20 bore as in repairs

S&F GI Elbow 15 mm bore as in repairs

S&F GI Elbow 20 mm bore as in repairs

S&F GI Elbow 40 mm bore as in repairs

S&F GI Socket 15 mm bore as in repairs

S&F GI Socket 20 mm bore as in repairs

S&F GI Socket 40 mm bore as in repairs

S&F GI tank nipple 15 mm bore as in repairs

S&F GI tank nipple 20 mm bore as in repairs

S&F GI union 15 mm bore as in repairs

S&FGI union 20 mm bore as in repairs

S&FGI reducer 20/15 mm bore as in repairs

S&FGI reducer 25/20 mm bore as in repairs

S&FGI reducer 50/40 mm bore as in repairs

S&F Pvc Plugs 15 mm

S&F PVC plugs 20 mm

S&F PVC connections 15mm size with PTMT nuts of length 450 mm

M&L for 15mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches.

Do but fixing only

M&L for 20 mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches.

Do but fixing only

M&L for 25 mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches.

Do but fixing only

M&L for 20 mm bore cutting existing steel tubing for alteration or addition (Each cut to be measured seperately)

S&F Bib taps, 15 mm bore ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs.

S&F as in repair 15mm bore stop cock cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule.

S&F as in repair 15mm bore stop cock cast copper alloy concealed type screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule.

S&F as in repair 20 mm bore stop cock cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule .

S&F as in repair 15 mm bore PTMT (Paryag/equivalent) Ball valve high pressure with polythene float and fly nuts with epoxy coated aluminum rod & high density plastic ball ,minimum weight 142 gms for 15mm bore complete screwed for iron pipe or brass ferrule.

S&F as in repair 20 mm bore PTMT (Paryag/equivalent) Ball valve high pressure with polythene float and fly nuts with epoxy coated aluminum rod & high density plastic ball ,minimum weight 210 gms for 20 mm bore complete screwed for iron pipe or brass ferrule.

S&F in repair Gun metal globe or gate valve 15 mm bore with iron wheel head, screwed both ends for iorn pipe and if reqd cutting to be made in running pipe for fixing of gate valve.

S&F in repair Gun metal globe or gate valve 20 mm bore with iron wheel head, screwed both ends for iorn pipe and if reqd cutting to be made in running pipe for fixing of gate valve.

S&F in repair Gun metal globe or gate valve 25 mm bore with iron wheel head, screwed both ends for iorn pipe and if reqd cutting to be made in running pipe for fixing of gate valve.

Sensor for urinals fixed as in repairs .( Hindware , CERA,Perryware)

S&f 110mm bore PVC (SWR) pipe single socketed , in any length with rubber joints fixed to walls

S&f 110mm bore PVC (SWR) pipe bends any radius

S&f 75mm bore PVC (SWR) pipe single socketed , in any length with rubber joints fixed to walls

S&f 75mm bore PVC (SWR) pipe bends any radius

S&F 75 mm bore PVC (SWR)) floor traps plian with grating incl jointing with solvent cement.

S&F in repairs PVC flushing cistern,10 litrs ca[acity low level, white with inlet, ball valve ,complete including connection to pipe all as specified.

S&F 32 mm bore PVC waste pipe with fitting for disposal of waste water .

S&F 40 mm bore PVC waste pipe with fitting for disposal of waste water .

M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:4 all as specified.

Jodhpur stone of roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete

M&L PCC (1:2:4:) type B1 , using 20 mm graded stone aggregate 40 mm thick,finished the surface even and smooth w/o using extra cement.

M&L PCC (1:2:4:) type B1 , using 20 mm graded stone aggregate 25 mm thick,finished the surface even and smooth w/o using extra cement.

M&L PCC (1:2:4) type B1 using 20 mm graded cushed stone agg as in coping ,benching and the like incl form work

M&L for cutting parapets walls ,kerbs or any arrangement at roof slab for providing spout of minimum 40 mm bore GI pipe and minimum length 1.00 mtr

M&L for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:4,even and smooth w/o using extra cement .

Supply only liquid intigral water proofing compound

M&L for applying two coats of cement based paint over a coat of priming paint as per maufacturer's instructions after preparation of new or old untreated plastered surfaces

Racking out joints /pointing to brick work or brick tiles laid flat in floors surface channels roofs etc laid in cement mortar

M&L for flush pointing in cement mortar 1:4 laid flat or brick tiles in paving etc

Providing cement concerete PCC 1:2:4 type B0 in roof kerbs or mud stops rounded or chamfered on edges complete

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation etc or for laying of cables, pipes etc and getting out in soft/loose soil completed all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil completed all as specified and directed by Engineer-in-Charge

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point completed all as specified and directed by Engineer-in-Charge

M&L for cutting/dismantling of PCC hardstanding / WBM road with soling & premix carpet of any description for repair/replacement of water supply pipe lines and disposal of debris & rubbish to a distance exc 250m but not exc 500m and making good the same with & including plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as existing depth complete all as specified & directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore for GI pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 80 mm bore for GI pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 100 mm bore for GI pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 40mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 50mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 50mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 80mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 50mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 100 mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 50mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 40 to 80mm bore GI/DI water pipe line including drilling and welding of 15/20mm GI socket and necessary rubber insertion, nut, bolts & washers complete all as directed.

S&F 15mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 15mm bore, complete, all as specified & directed.

S&F 20mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20mm bore, complete, all as specified & directed.

S&F 25mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25mm bore, complete, all as specified & directed.

S&F 40mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 40 mm bore, complete, all as specified & directed.

S&F 50mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 50 mm bore, complete, all as specified & directed.

Supply & fix or laying CPVC pipes SDR 11 & plain CPVC SDR11 fittings in trenches or on wall or roof of 50 mm bore dia complete all as specified by Engineer -in charge.

Supply & fix or laying CPVC schedule 80 pipes & plain CPVC shedule 80 fittings in trenches or on wall or roof of 62.5 mm bore dia complete all as specified by Engineer -in charge.

Supply & fix or laying CPVC schedule 80 pipes & plain CPVC shedule 80 fittings in trenches or on wall or roof of 75 mm bore dia complete all as specified by Engineer -in charge.

Supply & fix or laying CPVC schedule 80 pipes & plain CPVC shedule 80 fittings in trenches or on wall or roof of 90,100 mm bore dia complete all as specified by Engineer -in charge.

S&F stop valves cast copper alloy screwed down ,high pressure ,with cruch or butterfly handle ,screwed both side ends for iron pipes or for unions of size 15 mm bore complete all as spoecified and directed.

S&F stop valves cast copper alloy screwed down ,high pressure ,with cruch or butterfly handle ,screwed both side ends for iron pipes or for unions of size 20 mm bore complete all as spoecified and directed.

S&F stop valves cast copper alloy screwed down ,high pressure ,with cruch or butterfly handle ,screwed both side ends for iron pipes or for unions of size 25mm bore complete all as spoecified and directed.

S&F ball brass valve high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule of size 15 mm bore complete all as specified and directed.

S&F ball brass valve high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed.

M&L health paucet , brass chromium plated including flexible pipe suitable for 15 mm bore water connection , fixed in repairs.

M&L coloured non skid ceramic tilies 7 to 8mm thick square/rectangular exceeding 0.18sqm in floor etc set floors etc set and jointed in neat slurry and pointed in cloured cement to match including 15mm thick screed bed CM 1:6

M&L glazed ceramic coloured tiles in vertical surfacaes 350x250x7mm/450x350x7mm thick set set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment over 10 mm thick rendering in CM 1:4 complete all as specified.

S&F in repairs HDFE 15 mm elbow with one side female thread and one side plain with solvent etc complete all as specifeid Make:- Astral or equivalent.

S&F in repairs HDFE 15 mm elbow with solvent etc complete all as specifeid Make:- Astral or equivalent.

S&F in repairs HDFE 15 mm Tee with one side female thread and one side plain with solvent etc complete all as specifeid Make:- Astral or equivalent.

S&F in repairs HDFE 15 mm Tee with solvent etc complete all as specifeid Make:- Astral or equivalent.

S&F in repairs HDFE 15 mm socket with one side female thread and one side plain with solvent etc complete all as specifeid Make:- Astral or equivalent.

S&F in repairs HDFE 15 mm socket with solvent etc complete all as specifeid Make:- Astral or equivalent.

m/s gaurav enterprises