REPAIRS POLISH TO CERTAIN TYPES OF WOODEN STEEL TRADE PATTERN FURNITURE AND PAINTING TO STEEL FURNITURE AT CDM OTM COMPLEX AND MD ACCN UNDER GE NORTH SECUNDERABAD

Amount

BED PLY WOOD TOP (FD-246/ 247) Removing the existing unserviceable/broken long rail and S&F new well seasoned hard wood (teak) long rail complete all as per measurements shown on drawings,as specified and directed by Engg-in-Charge.

Removing the existing unserviceable./broken complete head board with legs of BED PLY WOOD TOP (FD-246/ 247) and S&F new head board with teak wood legs complete all as per measurements shown on drawings,as specified and directed by Engg-in-Charge.

Removing the existing unserviceable/broken complete foot board with legs of BED PLY WOOD TOP (FD-246/ 247) and S&F new foot board with teak wood legs complete all as per measurements shown on drawings,as specified and directed by Engg-in-Charge.

Removing the existing unserviceable/broken ply wood top of BED PLY WOOD TOP (FD-246/ 247) and S&F new ply wood top of size 1860mmx860mm BWR GRADE duly ISI marked with fixing in position with suitable size screws & cup washers complete all per measurements shown on drawings,as specified and directed by Engg-in-Charge.

Removing the existing unserviceable./worn out/ broken plywood of head board and foot board on both sides of BED PLY WOOD TOP (FD-246/ 247) and S&F new 4mm thick one side teak face plywood for head board and foot board on both sides complete all per measurements shown on drawings,as specified and directed by Engg-in-Charge.

Removing the existing unserviceable/broken teak wood beading for Head board and Foot board of BED PLY WOOD TOP (FD-246/ 247) and S&F new teak wood beading of 12mm dia half round for head and foot board complete all per measurements shown on drawings,as specified and directed by Engg-in-Charge..

Removing old broken / unserviceable MS bracket of of BED PLY WOOD TOP (FD-246/ 247) and S&F new MS bracket of size150mmx35mmx5mm thick "L"shaped duly treated with black paint,etc shown on drawings,as specified and directed by Engg-in-Charge.

M & L for preparation of wood surfaces of BED PLY WOOD TOP (FD-246/ 247) by complete removal of existing treatment using grinding machine including filling of cavities by putty,filler,sealer and applying two coats of french polish to obtain glossy finish complete all as specified and as directed by Enginner-in-charge. Note: Work will be executed at Md Accn at CDM and BSO's Furniture Yard as directed.

SOFA SET 5 SEATER (FD 281/373 ) CUSHION : Removing old broken / unserviceable front legs of sofa single seat (FD 281/373 ) and S&F new Front legs of size 530mmx70mmx35mm all as shown on drgcomplete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable rear legs of sofa single seat (FD 281/373 ) and S&F new rear legs of size 530mmx70mmx35mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable arms of sofa single seat (FD 281/373 ) and S&F new arms of size 725mmx35mmx70mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

All as per item sl No. 2.00 herein before but for sofa set 3 seater (FD 281/373) .

All as per item sl No. 2.01 herein before but for sofa set 3 seater (FD 281/373) .

All as per item sl No. 2.02 herein before but for sofa set 3 seater (FD 281/373 ).

Removing old broken / unserviceable front rail of sofa single seater (FD 281/373 ) and S&F new front rail of size 530mmx35mmx100mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable front rail of sofa three seater (FD 281/373 ) and S&F new front rail of size 1590mmx35mmx100mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable wooden frame for back of sofa three seater (FD 281/373 ) and S&F new frame of size 35mmx70mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable battons of sofa single/three seater (FD 281/373 ) and S&F new battons of size 560mmx20mmx50mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable PVC shoe of sofa single/three seater (FD 281/373 )and S&F new PVC shoe of best quality all as shown on drg,complete all as specified and as directed by Enginner-in-charge

Removing old broken / unserviceable ply of sofa single seater(FD 281/373 ) and S&F new plywood 8mm thick Make : Green ply/ KIT Ply /century ply of size 560mmx530mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable ply of sofa three seater (FD 281/373 )and S&F new plywood 8mm thick of size 560mmx1590mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removal of old existing unsv seat made up of foam cusion with tapestry cover of sofa set 5 seater (FD 281/373 )and S&F set of 5 seats made up of 100mm thick and 40 density PU foam cushion of size 530mmx560mm covered with best quality cora cloth and tapestry cloth duly stitched with nylon zip on one side complete all as specified and as directed by Enginner-in-charge. Note: Tapestry cloth shall be D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE

Removal of old existing unsv back made up of foam cusion with tapestry cover of sofa set 5 seater (FD 281/373 )and S/F set of 5 back made up of 100mm thick and 40 density PU foam cushion of size 530mmx560mm covered with best quality cora cloth and tapestry cloth duly stitched with nylon zip on one side complete all as specified and as directed by Enginner-in-charge. Note: Tapestry cloth shall be D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE

M&L Polishing to entire sofa set 5 seater (FD 281/373 ) duly preparation of old and new surfaces complete all as specified and shown drawing and as directed.

Sofa single seat with cushion, Ref FD-281/373 Removing old broken / unserviceable front legs of sofa single seat and S&F new Front legs of size 530mmx70mmx35mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

M&L for removing old broken / unserviceable rear legs of sofa single seat FD-281/373 and S&F new rear legs of size 530mmx70mmx35mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable arms of sofa single seat FD-281/373 and S&F new arms of size 725mmx35mmx70mm all as shown on drg. and as directed .

Removing old broken / unserviceable front rail of sofa single seat FD-281/373 and S&F new front rail of size 530mmx35mmx100mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable wooden frame for back of sofa single seat FD-281/373 and S&F new frame of size 35mmx70mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable battons of sofa single seat FD-281/373 and S&F new battons of size 560mmx20mmx50mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable PVC shoe of sofa single seat FD-281/373 and S&F new PVC shoe of best quality all as shown on drg, complete all as specified and as directed by Enginner-in-charge.

Removing old broken / unserviceable ply of sofa single seat FD-281/373 and S&F new plywood 8mm thick Make : Green ply/ Archid /century ply of size 560mmx530mm all as shown on drg,complete all as specified and as directed by Enginner-in-charge.

Removal of old existing unsv seat made up of foam cusion with tapestry cover of sofa single seat FD-281/373 and S&F seat made up of 100mm thick and 40 density PU foam cushion of size 530mmx560mm covered with best quality cora cloth and tapestry cloth duly stitched with nylon zip on one side complete all as specified and as directed by Enginner-in-charge. Note: Tapestry cloth shall be D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE

M&L for Removal of old existing unsv back made up of foam cusion with tapestry cover of sofa single seat FD-281/373 and S/F back made up of 100mm thick and 40 density PU foam cushion of size 530mmx560mm covered with best quality cora cloth and tapestry cloth duly stitched with nylon zip on one side complete all as specified and as directed by Enginner-in-charge. Note: Tapestry cloth shall be D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE

M&L Polishing to entire sofa single seat FD-281/373 duly preparing the old and new surfaces complete all as specified and shown drawing and as directed.

Chair Dining FD-16(M), 279, 228 Removal of old unsv wooden Font Legs of Chair Dining and S&F New seasoned teak wood Legs with exact dimensions as shown on drgs,complete all as specified and directed by Engg-in-Charge.

All as per Item Sl No. 4.00 above for rear Legs of Chair Dining FD-16(M), 279, 228

All as per Item Sl No. 4.00 above for side rails of Chair Dining FD-16(M), 279, 228

All as per Item Sl No. 4.00 above for front rails of Chair Dining FD-16(M), 279, 228

All as per Item Sl No. 4.00 above for back rails of Chair Dining FD-16(M), 279, 228

All as per Item Sl No. 4.00 above for back rest complete of Chair Dining FD-16(M), 279, 228

All as per Item Sl No. 4.00 above for bottom stiffner of Chair Dining FD-16(M), 279, 228

Removing old unsv PVC shoes and S&F New PVC shoes of best quality with 1/2" screw to the bottom of legs of Chair Dining FD-16(M), 279, 228.

Removing Old unserviceable Cane From Chair Dining FD-16(M), 279, 228 and Re-canning with 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Parameter work; Make shall be Shah/Premier in white colour, complete all as Specified and directed by Eng-in Charge.

TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 Removing unsv top of TABLE (900mmX600mmX760mm) and S&F new table top of size 900mmx600mm made up of 18mm thick prelaminated particle board ,approved shade,exterior grade, ISI marked of with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as shown on drawing, as specified and directed by Enginner-in-charge.

Removing unsv leg of TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 and S&F well seasoned hard wood (teak)leg of size 60mm x 30mm x 760mm long complete all as shown on drawing, as specified and directed by Enginner-in-charge.

Removing unsv top rail of TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 and Supply and fix well seasoned hard wood (teak) top rail of size 20mm x 60mm x 900mm complete all as shown on drawing, as specified and directed by Enginner-in-charge.

Removing unsv top rail of TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 and Supply and fix well seasoned hard wood (teak) top rail of size 20mm x 60mm x 600mm complete all as shown on drawing, as specified and directed by Enginner-in-charge.

Removing broken pvc shoes of TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 and S&F PVC shoes of size 25mm dia of best quality complete all as directed by Eng-in-charge.

M&L Polishing of 2 coats of french polish to to entire TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 complete all as specified and as directed.

TABLE WRITING FD- 275 & 249 Removing old unserviceable top of Table Writing and S&F new Top of size1145mmx600mm made of made up of 18mm thick prelaminated particle board (approved shade by GE) exterior grade, ISI marked with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable Leg of TABLE WRITING FD- 275 & 249 and S&F new leg of size 55mmx35mmx760mm of well seasoned teak wood complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable Top rail long of TABLE WRITING FD- 275 & 249 and S&F new rail of size 25mmx50mmx1145 of well seasoned teak wood complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable Top rail small of TABLE WRITING FD- 275 & 249 and S&F new rail of size 25mmx50mmx600mmof well seasoned teak wood complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable PVC rings of TABLE WRITING FD- 275 & 249 and S&F new PVC rings of 25mm dia of best quality as approved fixed with screw complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old & u/s sides, back of drawer from TABLE WRITING FD- 275 & 249 and S/F new sides, bottom, back of drawers of existing shape,size made out of 12mm thick plywood BWR grade, ISI marked, complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old & u/s front of drawer from TABLE WRITING FD- 275 & 249 and S/F new front of drawer made out of 18mm thick plywood BWR grade ISI marked, existing shape,size.complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old & u/s bottom of drawers from TABLE WRITING FD- 275 & 249 and S/F new bottom of drawers of existing shape,size made out of 6mm thick plywood BWR grade, ISI marked, complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable Stiffner Long of Table Writing and S&F new well seasoned teak wood Stiffner Long of size 25mmx50mmx1145mm complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable Stiffner small of TABLE WRITING FD- 275 & 249 and S&F new well seasoned teak wood Stiffner small of size 600mmx25mmx50mm complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Taking down old & u/s door shutter from TABLE WRITING FD- 275 & 249 and S&F new door shutters of existing size all as per drg made out of prelaminated particle board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround the shutter of existing shape,size complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unsv/ broken handle from door shutter and drawers of TABLE WRITING FD- 275 & 249 and S/F new stainless steel handle of make: JWL/ ATLANTIC/ AMAR Enterprisesas per sample approved by Engg-in-Charge for shutters and knobs for drawers of make: Himalaya craft/indian shelf/ LAPO as per sample approved by Engg-in-Charge/ GE complete all as specified & shown in drg and directed by Engg-in Charge.

Removing old unsv/ broken hinges from shutter of TABLE WRITING FD- 275 & 249and S/F new piano type continuous hinges of size 20-25mm wide of Make: Generic or equivalent sample as approved by Engg-in-charge for Door shutter complete all as specified & shown in drg and directed by Engg-in Charge.

All existing exposed to view surfaces of plywood used inTABLE WRITING FD- 275 & 249 of existing shape, size shall be covered with 4mm thick vineer sheet of approved shade all as directed by Engg-in- Charge. Make of veneer sheet : Century ply/Green Ply/kit Ply.

M&L for 02 coats of French polishing of approved shade to entire surface of TABLE WRITING FD- 275 & 249 complete all as specified and directed by Engineer-in-Charge.

TEAPOY FD-232 ,278 & 382 Removing old unserviceable Top of Teapoy and S&F new top complete of size600mmx450mm made of 18mm thick prelaminated particle board (approved shade by GE) exterior grade, ISI marked with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top long rail of TEAPOY FD-232 ,278 & 382 and S&F well seasoned teak wood new long rail of size 20mmx50mmx600mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top short rail of TEAPOY FD-232 ,278 & 382 and S&F well seasoned teak wood new short rail of size 20mmx50mm450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable legs of TEAPOY FD-232 ,278 & 382 and S&F well seasoned teak wood new leg of size 60mmx30mm540mm complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable bottom rail of TEAPOY FD-232 ,278 & 382 and S&F well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable PVC rings of TEAPOY FD-232 ,278 & 382 and S&F new PVC rings of 20mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge.

M&L for 2 coats of french polish of Make : Asian /Berger / Nerolacover to entire surface of TEAPOY FD-232 ,278 & 382 of approved shade complete all as specified and directed by Engineer-in-Charge .

PEG TABLE FD-236, 277 & 384 Removing old unserviceable Top of Table Peg and S&F new top complete of size300mmx450mm made of 18mm thick prelaminated particle board (approved shade by GE) exterior grade, ISI marked with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable top long rail of Table Peg and S&F well seasoned teak wood new long rail of size 20mmx40mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top short rail of Table Peg and S&F well seasoned teak wood new short rail of size 20mmx40mmx300mm complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable leg of Table Peg and S&F well seasoned teak wood new leg of size 30mmx50mmx380mm complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable bottom rail of Table peg and S&F well seasoned teak wood new bottom rail of size 20mmx40mmx300mm complete all as shown on drg,as specified and directed by Engineer-in-Charge.

Removing old unserviceable PVC rings of Table Peg and S&F new PVC rings of 20mm dia of best quality fixed with screw complete all as shown on drg,as specified and directed by Engineer-in-Charge.

M&L for 2 coats of french polish of Make : Asian /Berger / Nerolacover to entire surface of table peg of approved shade complete all as specified and directed by Engineer-in-Charge.

TABLE DRESSING GENTS (FD-230, FD-379) Removing old unserviceable Drawer of Table Dressing gents and S&F new Drawer complete as per drg of existing size, shape made up of 12mm thick ply wood of Make : kit ply/ Green Ply/ century Ply complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing broken/ unserviceable Looking mirror of Table Dressing Gents and S&F new mirror of size 380mmx760mm, 5 to 5.5mm thick of Make: Modi Guard /swastik/ Saint Gobin complete with teak wood frame duly fixed with clamp for hanging of table dressing gents complete all as specified and shown on drg and directed by Engineer-in-Charge.

S&F 4mm vineer sheet of approved shade of existing shape, size to Top, sides, front of drawer of table dressing gents all as directed by Engg-in- Charge. Make of veneer sheet : Century ply/Green Ply/kit Ply.

Removing old unserviceable knobs of drawers of Table Dressing gents and S&F new knobs for drawers of make: Himalaya craft/indian shelf/ LAPO as per sample approved by Engg-in-Charge/ GE complete

M&L for polishing two coat to new part and one coat to entire surface table dresing gents complete all as specified and directed by Enginer-in-Charge.

Removing old unserviceable batton of Table Dressing Gents and Supply and fix well seasoned teak wood new batton of size 35mmx25mm complete all as specified and as shown on drawings

Removing old unserviceable wood edging of Table Dressing Gents and Supply and fix new teak wood edging of size 18mmx4mm all alround the front portion dressing table complete all as specified and as shown on drawing.

TABLE DINING 6/8 PERSONS FD-239 & 273 Removing old unserviceable Top of Table Dining 6 Pers and S&F new top complete of size 1500mm(L) x 900mm (W) suitable for table dinging 6 pers shall be made of 18mm thick prelaminated particle board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as specified and shown on drg and directed by Engineer-in-Charge.

All as items No10.00 here-in-before but overall size 1800mm(L) x 900 mm (W) for table dining 8 persons complete all as shown on drg

Removing old unserviceable top long rail of Table Dining 6 Pers and S&F well seasoned teak wood new long rail of size 25mmx100mmx1500mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top long rail of Table Dining 8 Pers and S&F well seasoned teak wood new long rail of size 25mmx100mmx1800mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top short rail of Table Dining 6/8 Pers and S&F well seasoned teak wood new short rail of size 25mmx100mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable legs of Table Dining 6/8 Pers and S&F well seasoned teak wood new leg of size 75mmx40mmx760mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable wooden brackets of Table Dining 6/8 Pers and S&F new well seasoned teak wood brackets of size 50mmx50mmx25mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable PVC rings of Table Dining 6/8 Pers and S&F new PVC rings of size 25mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge.

M&L for 2 coats of french polish Make : Asian/ Berger/ Nerolac over a coat of wood primer to new part and 02 coat of french polish of approved shade to entire wood surface complete to Table Dining 6/8 Pers complete all as specified and directed by Engineer-in-Charge.

TABLE BED SIDE FD28,FD210, FD248 & FD276Removing old u/s plywood back of the table bed side & S&F new back of size 510mmx450mm of 6mm thick plywood BWR Gde ISI Marked of of existing shape,size Make:kit Ply/ Green Ply/Century Ply all as specified & shown on drg and directed by Engg-in Charge.

Removing old u/s top of the table bed side & S&F new top of size 450mm x230mm made out of 18mm thick Pelaminated particle board one side teak shade ISI Marked of Make:kit Ply/ Green Ply/Century Ply all as specified & shown on drg and directed by Engg-in Charge.

Removing old u/s sides of the table bed side & S&F new sides of size 510mmx 230mm made out of 18mm thick Pelaminated particle board one side teak shade ISI Marked of Make:Kit Ply/ Green Ply/Century Ply all as specified & shown on drg and directed by Engg-in Charge.

M&L for removing old u/s shelf of the table bed side & S&F new shelf of size 450mm x230mm made out of 12mm thick Pelaminated particle board one side teak shade ISI Marked of Make::Kit Ply Ply/ Green Ply/Century Ply all as specified & shown on drg and directed by Engg-in Charge.. Ref Drg No FD-276, FD-249

Removing old u/s beading of the table bed side and S&F new teak wood beading 4mm thick 18mm wide alround the front egdes of table bed side complete all as specified & shown on drg and directed by Engg-in Charge.

All wood surfaces of Table Bed side expose to view shall be 02 coats of French polish of approved shade except Particle board as directed by Engg-in-Charge.

Almirah Large Steel FD-1031 Removing of following old unserviceable/damaged parts of Almirah Large steel and supply/fix the same with new part to match with the existing item all as per Drg: (a) 3 way locking assembly system for almirah large steel suitable for almirah all as shown in drawing as approved by Engg-in-charge. Ref Drg Almirah Large Steel FD-1031

Lock : New Lock should be of 65mm, 6 lever Make Godrej/Harrison/Mortice .Ref Drg No FD- 1031

Cleat : New cleat should be of size 40mm x 25mm x1mm thick steel .Ref Drg Almirah Large Steel FD-1031

CP handle 100mm long : Make SOMA/S.CEE all as shown in drawing as approved by Engg-in-charge. Ref Drg Almirah Large Steel FD-1031

Legs : New legs must be made of 1mm thick MS sheet of size 485mm long x 100mm highx 100mm wide and to be joined with continuous gas welding as specified and shown in drg complete. Ref Drg Almirah Large Steel FD-1031

Shelves :New shelves must be made of 1mm thick MS sheet of size 920mm x485mm for almirah large steel made to shape and size all as specified and shown on drg. Ref Drg Almirah Large Steel FD-1031

Door Shutter :New shutter must be made of 1mm thick MS sheet of size 1985mmx460 for almirah large steel ( FD-1031) made to shape and size all as specified and shown on drg.

M&L for Preparation of old painted steel surface of the Almirah Large Steel (Ref Drg FD-1031 and FD/E6/MAP/18 ) including shelves by removing all dents filling with putty and spray painting with 2 coats synthetic enamel paint in dual colour of Make: Berger/ Asian/ Shalimar paints of approved shade/Colour by GE over external & internal surfaces of Almirah large steel complete, all as specified and directed by Engr-in-Charge.

Almirah Medium Steel FD-1032 removing the following old unserviceable/damaged part and Supply /fix the same with new part to match with the existing one:- (a) 3 way locking assembly system for almirah med steel suitable for almirah all as shown in drawing as approved by Engg-in-charge.

All as per item No. 13.01 as above, but for Lock : New Lock should be of brass, 65mm, 6 lever Make Godrej/Harrison/Mortice As approved by GE. Ref FD-1032

All as per item No. 13.01 as above, but for CP handle 100mm long : Make SOMA/S.CEE as shown in drg as approved by Engg-in-charge. Ref FD-1032

Legs : New legs must be made of 1mm thick MS sheet of size 440mm long x 100mm highx 100mm wide and to be joined with continuous gas welding as specified and shown in drg complete. Ref FD-1032

Shelves :New shelves must be made of 1mm thick MS sheet of size 760mm x440mm for almirah med steel made to shape and size all as specified and shown on drg. Ref FD-1032

Door Shutter :New shutter must be made of 1mm thick MS sheet of size 1270mmx380 for almirah med steel ( FD-1032), made to shape and size all as specified and shown on drg.

M&L for Preparation of old painted steel surface of the Almirah Medium Steel including shelves by removing all dents filling with putty and spray painting with 2 coat synthetic enamel paint in dual colour of Make: Berger/ Asian/ Shalimar paints of approved shade/Colour by GE over external & internal surfaces of Almirah med steel complete, all as specified and directed by Engr-in-Charge. Ref FD-1032

TABLE OFFICE OFFICER STEEL (FD-1003 )Removing the existing unserviceable/broken top of table office officer steel and Supply & Fix new table top of 1370x760mm of 18mm thick pre laminated particle board bonded with teak wood edging all round duly polishing to edging complete all as shown on drg, all as specified and as directed.

Removing the existing unserviceable lock of table office officers and Supply & Fix new brass lock of make: Harrison/ Gogrej/ Link with duplicate keys suitable for drawers complete all as specified and as directed.

ditto all as per item sl No14.01 here in before but for cabinate of Table office Officers steel

Removing the existing unserviceable /damaged drawer of table office officer steel and supply and fix new drawer complete all as per size shown in Drg made out of 18 gauge thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer by machine spray complete all as specified and shown on drg.

Material and labour for preparing the old steel surfaces of table office officers and applying two coats of synthetic enamel paint by machine spray complete all as specified and directed.

TABLE OFFICE CLERK STEEL (FD-84/1004) Removing the existing unserviceable/broken top of table office clerk steel and Supply & Fix new table top of size1200x600mm made up of 18mm thick Prelaminated particle board bonded with teak wood edging all round duly polishing to edging complete all as shown on drg and all specified and as directed.

Removing the existing unserviceable lock of table office clerk and Supply & Fix new brass lock of make: Harrison/ Gogrej/ Link with duplicate keys suitable for drawers complete all as specified and as directed.

Removing the existing unserviceable /damaged drawer of table office clk steel and supply and fix new drawer complete all as per size shown in Drg made out of 18 gauge thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer by machine spray complete all as specified and shown on drg.

Material and labour for preparing the old steel surfaces of table office clerk and applying two coats of synthetic enamel paint by machine spray complete all as specified and directed.

BOOK CASE STEEL FD1028 Removing the existing unserviceable/Broken glass for Shutter and S&F Plain glass 3mm thick of size 280mmx 720mm all as specified and shown on drg.

Removing the existing unserviceable handle and supply and fix steel handle 100mm long for 'Book Case steel' all as specified and shown on drg.

Removing the existing unserviceable lock and supply and fix new brass lock with keys in duplicate suitable for shutter of Book case steel complete all as specified and directed

Material and labour for preparation of entire old painted steel surfaces of ‘Book case steel’ and applying two coats of synthetic enamel paint internally and externally of approved shade as directed by Engg in Charge complete all as specified and as directed.

TABLE CENTRE FD 274, 235 Removing old unserviceable Top of Table Centre and S&F new top of size 900mmx450mm made of 18mm thick prelaminated particle board ONE one side teak face colour as approved shade by GE , ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top long rail of Table Centre and S&F well seasoned teak wood new long rail of size 20mmx50mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top short rail of Table Centre and S&F well seasoned teak wood new short rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable legs of Table Centre and S&F well seasoned teak wood new leg of size 60mmx30mmx400mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable bottom rail of Table centre and S&F well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable stiffner of Table centre and S&F well seasoned teak wood new stiffner of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable PVC rings of Table Centre and S&F new PVC rings of size 20mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge.

M&L for 2 coats of french polish over a coat of wood primer to new part and 02 coat of french polish of approved shade to entire surface complete to Table Centre (FD 274, 235GE (Gol)/TD/46/97) complete all as specified and directed by Engineer-in-Charge .

Table Computer ( Drg :TP) Removing the unserviceable table top supply and fix new top made out of pre-laminated particel board 25mm thick both side laminated of size 813mm x 788mm duly poviding 4mm thick wooden beading alround the top duly polished and complete all as specified and shown on drawing and as directed by Engg in Charge

Removing the unserviceable middle top cum tray supply and fix new top made out of pre-laminated particel board 18mm thick both side laminated of size 610mm x 610mm duly poviding 4mm thick wooden beading alround the top duly polished and complete all as specified and shown on drawing and as directed by Engg in Charge

Removing the unserviceable bottom ply cum tray supply and fix new one made out of pre-laminated particel board 18mm thick both side laminated of size 610mm x 610mm duly poviding 4mm thick wooden beading alround the top duly polished and complete all as specified and shown on drawing and as directed by Engg in Charge

Removing the unserviceable telescopic channels of pull out tray/drawer & supply and fix new telescopic channel as per existing size and complete all as specified and shown on drawing and as directed.

Removing the unserviceable side ply board of table computer and supply and fix new side ply board of size127mmx660mm made out of pre-laminated particle board 18mm thick and complete all as specified and shown on drawing and as directed.

Chair single seater (Drg: TP) M&L for Removal of old existing unsv foam cusion with tapestry cover of seat and back of chair and S/F new seat and back of existing size and shape on gound using foam cusion made up of 75mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved colour/ shade by Engg-in-Charge/GE duly stitched and upholsted complete all as directed.

CHAIR VERANDAH (FD/MAP-II/06 ) Removal of unsv seat of chair verandah and Supply and fix new PVC seat 4mm thick with grooves 90x10mm 10 No. on seat of size 455x455mm weight not less than 1.85 KG and providing 20mm wide, 420mm long ,4mm thick mild steel flat iron support to PVC seat with necessary welding complete all as specified, as shown on drawing and as directed.

Removal of unsv back of chair verandah and Supply and fix new PVC back 4mm thick with grooves 90x10mm 10 No. on seat of size 455x455mm weight not less than 1.85 KG and providing 20mm wide, 420mm long ,4mm thick mild steel flat iron support to PVC back with necessary welding complete all as specified, as shown on drawing and as directed.

Material and labour for preparing the old steel surfaces and painting with two coats of white synthetic enamel paint of Make: Berger/ Asian/ Nerolac with machine spray complete all as specified, as shown on drawing and as directed.

Remove unsv PVC shoe and providing new PVC shoes approved by Engg in charge .

ALMIRAH LARGE STEEL 1/2H 1/2S ( FD/E6/MAP/18) Removing the following old unserviceable/damaged part and replace/fix the same with new part to match with the existing item as per Drg: 3 way locking assembly system for almirah large steel suitable for almirah all as shown in drawing as approved by Engg-in-charge.

Lock : New Lock should be of 65mm, 6 lever Make Godrej/Harrison/Mortice.

Cleat : New cleat should be of size 40mm x 25mm x1mm thick steel.

CP handle 100mm long : Make SOMA/S.CEE all as shown in drawing as approved by Engg-in-charge.

Legs : New legs must be made of 1mm thick MS sheet of size 485mm long x 100mm highx 100mm wide and to be joined with continuous gas welding as specified and shown in drg complete.

Shelves :New shelves must be made of 1mm thick MS sheet of size 910mmx 490mm for almirah large steel made to shape and size all as specified and shown on drg.

Door Shutter :New shutter must be made of 1mm thick MS sheet of size 1800mmx 455mm for almirah large steel made to shape and size all as specified and shown on drg.

M&L for Preparation of old painted steel surface inner and outer portion of the Almirah Large Steel including shelves by removing all dents filling with putty and spray painting with 2 coat synthetic enamel paint in dual colour of Make: Berger/ Asian/ Shalimar paints of approved shade/Colour by GE over external & internal surfaces of Almirah large steel complete, all as specified and directed by Engr-in-Charge.

CHAIR WOODEN BOTTOM (FD-55,FD-225 & FD-285 Removing the existing unserviceable /broken rear leg and Supply and fix teak wood rear leg of size 55 x 30mm complete all as specified and shown on drawing and as directed.

Removing the existing unserviceable/ broken front leg and Supply and fix teak wood front leg of size 30mm x 55mm complete all as specified and shown on drawing and as directed.

Removing the existing unserviceable/broken back rail Supply and fix teak wood back rail of size 50mm x 35mm complete all as specified and shown on drawing and as directed.

Removing the existing unserviceable/broken front rail of seat frame and Supply and fix teak wood front rail of size 30mm x 65mm of seat frame complete all as specified and shown on drawing and as directed.

Supply and fix 6mm thick ply wood seat plank with commercial face veneers on both sides including drilling holes and removing the existing unserviceable/broken seat plank complete all as specified and shown on drawing and as directed.

Removing the existing unserviceable/broken stiffener and Supply and fix teak wood stiffener of size 20mm x 25mm complete all as specified and shown on drawing and as directed.

Removing the existing unserviceable/ broken back rest frameSupply and fix teak wood back rest of size 50 x 15 mm to the back frame complete all as specified and shown on drawing and as directed Engr-In-Charge.

Material and labour for polishing to repaired chairs duly preparing the old and new surfaces and including providing hard rubber ring screwed to the legs complete all as specified and shown on drawing and as directed.

LOCKER BED SIDE STEEL , FD-1029 Removal of existing unserviceable handle and supply and fix new stainless steel handle for shutters of size 100mm long of Make: JWL/ ATLANTIC/ AMAR Enterprises as per sample approved by Engg-in-Charge for 'Locker bed side steel' complete all as specified and shown on drawing.

Removing the existing unserviceable Clamp/stud and supply and fix clamp shaped stud steel sheet made out of 1mm thick sheet of size 75x80mm duly shaped for holding hinges/shutter complete all as specified and shown on drawing.

Removing the existing unserviceable hasp and staple and supply and fix Stainless steel hasp and staple of size 75mmx40mmx3mm complete all as specified and shown on drawing.

Removing the existing damaged/unsv bottom legs and supply and fix new bottom legs of locker bed side steel made out of 1mm thick mild steel sheet with full duly cutting, welding to all sides of the new legs.

Removing the existing conduit pipe and supply and fix 20mm dia stainless steel conduit pipe hanger rod 375mm long in the locker bedside steel complete all as specified and shown on drawing.

Removing the existing sockets for conduit pipe and supply and fix 20mm dia steel sockets to hold conduit pipe complete all as specified and shown on drawing.

Removing the existing unserviceable/broken shelf and supply and fix shelf of size 530mmx370mm x 1mm thick mild steel sheet of locker bed side steel complete all as specified and shown on drawing.

Removing the existing unserviceable broken Shutter and supply and fix new shutter of size 910mmx340mm x 1mm thick mild steel sheet and complete all as specified and shown on drawing.

Material and labour for preparation of the surfaces of locker bed side steel internally and externally and making good the locker duly welding/denting to all places of locker where ever required and applying two coats of synthetic enamel paint gray colour over a coat of red oxide primer with machine spray complete to all old/new surfaces internally & externally complete as specified and shown on drawing.

M & L for preparation of wooden surfaces of follwing furniture articles by complete removal of existing treatment using grinding machine including filling of cavities by putty,filler,sealer and applying two coats of french polish to obtain glossy finish complete all as specified and as directed by Enginner-in-charge. Note: Work will be executed at Md Accn at CDM and BSO's Furniture Yard as directed. (a) CHAIR WRITING wooden

All as per Sr Item No. 24.01 above, but for TABLE DRESSING LADIES

All as per Sr Item No. 24.01 above, but for HAT STAND WITH MIRROR

Mahesh Traders

SRINIVASA AND BROS

A.K. MARKETING ASSOCIATES

M/S DIVIJA BUILDERS

sandhya enterprises