SPECIAL REPAIR TO BLDG NO. T-130, T-141 AND T-143 AT CHUMATHANG AND PROVN OF HARDSTANDING WITH PAVER BLOCKS ALONG WITH HIGH MAST LIGHT AT KIARI AREA UNDER GE 860 EWS.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engr-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each colour tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:4 for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 sqm with shutters without taking of shutter from the framecomplete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame not exc 1.5 Sqm with shutters without taking of shutter from the frame complete all as specified and directed by Engr-in-Charge.

S&F Plain solid straight chowkats or frame rounded or chamfered put together with glue pined at joints with 2nd class hard wood complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick 2nd class hardwood Plain, framed, panelled door shutters(any number of panels), with panels of timber flat on both sides(feather edged), veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 150mm extruded aluminium handle complete all as specified and directed by Engr-in-Charge.

S&F MS butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy barrel tower bolt of extruded type 75mm long complete all as specified and directed by Engr-in-Charge.

S&F 140 mm over all length of cover plate floor door stopper of aluminium alloy body and tounge, anodized with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass of any thickness size or quality from steel frames complete all as specified and directed by Engr-in-Charge.

S&F 4mm thick sheet glass ordinary quality and glazing with aluminium snap beading on aluminium frame for door/window and ventilator in square n exc 0.5 sqm each complete all as specified and directed by Engr-in-Charge.

M&L preparation of untreated new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and treating with two coats of synthetic enamel paint all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and priming with a coat of red oxide and treating with two coats of synthetic enamel paint all as specified and directed.

Dismantling wall/ceiling board(fibre, pulp insulation etc.) or insulation boards/slabs/blankets, any thickness including fillets complete all as specified and directed.

M&L for veneered decorative plywood 6mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work, (including fillets n exc 6sq cm) complete as in wall paneling complete all as specified and directed by Engr-in-Charge.

M&L for veneered decorative plywood 4mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work, (including fillets n exc 6sq cm) complete as in ceiling paneling complete all as specified and directed by Engr-in-Charge.

M&L First class soft wood sectional area not exceeding 6 sqcm Moulding as in cornices, picture rails and the like , secured with nails or brads complete all as specified and directed by Engr-in-Charge.

Dismantling of timber fillet under 40 Sq cm in section in framed work complete all as specified and directed by Engr-in-Charge.

M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 6 Sq cm n.exc 13 Sq cm secured with nails or brads.

Demolition of cement concrete (unreinforced) in ground floor and paving etc in exec 15 cm thick below or above GL complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection/ path and fininshed even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall complete all as specified and directed by Engr-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

M&L Galvanised, corrugated mild steel sheeting 0.63mm with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 as specified and directed by Engr-in-Charge.

Surface dressing n. exc 15cm deep in soft/loose soil complete all as specified and directed by Engr-in-Charge.

M&L for Hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:3:6 100mm thick type C-2 using 40mm graded stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified and directed by Engr-in-Charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in-Charge.

M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B1 1:2:4 (using 20mm graded aggregate) complete all as specified and directed by Engr-in-Charge.

Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.

Taking down of MCB DB/TPN 8way/12way including MCB SP and SPN and making good of wall complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board /Gang Box of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge.

One light point controlled by one 5 Amps one way switch

One 3 pin socket outlet 5 Amps on independent board

One 3 pin socket outlet 5 Amps on same board

Description all as per item Srl No. 38.00 here-in-before but for one 3 pin socket outlet 15 Amps on independent board with 2.5 Sq.mm. FRLS PVC wire and one run of 2.5 Sq.mm. copper cable for earth continuity.

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.

S&F Socket outlet 2 in 1, 3 pin, 6A (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose) complete all as specified and directed by Engr-in-Charge.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing inverter LED Bulb 9 W ,220 V, white color complete all as specified and directed by Engr-in-Charge.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F MCB DB sheet enclosure, Single door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.

Description all as per item Srl No. 48.00 here-in-before but MCB DB 12 way complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.

Supply and fix exhaust fan, Plastic body AC single Phase 230V of size 250mm sweep with, blades, and frame and louvers all as directed and specified by Engr- in -charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M&L for GI Pipe (medium grade, ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.

Supply and fixing of 15/16 metre high mast shaft in two sections suitable for 50m/sec wind speed, with raising lowering system comprising, head frame, luminaries carriage suitable to install 6 Nos luminaries in symmetrical arrangement double drum winch, 6mm diameter stainless steel wire rope, trailing cable connector, integral power tool motor, manual handle ,junction box, lightning finial, wiring material, power cables between panel and mast, MCB in base compartment, Cg mounting clamps and bolts, luminary mounting bolts complete all as specified and as directed by the Engineer in charge including the following:-

(a) Height: 15 meters to 16 meters (b) Design Standard: Generally conforms to IS 875, BS EN 10025, or other relevant standards (c) Material: Special grade steel plates (e.g., BSEN10025 grade 355 or equivalent) (d) Pole Sections: Typically two sections, joined by a telescopic slip joint (d) Bottom Diameter: Minimum 410 mm to 540 mm (e) Bottom Thickness: Minimum 4 mm to 5 mm (f) Top Thickness: Minimum 3 mm to 4 mm (g) Finish: Hot-dip galvanized, minimum 86 microns thickness (h) Base Plate: Minimum 740 mm diameter/width and 25 mm thickness (j) Winch System: Double drum, self-sustaining type with an internal power tool (motorized operation, also with manual option)

(k) Wire Ropes: High-tensile strength, stainless steel (AISI 316 grade), 6 mm diameter, with a safety factor of at least five (l) Lantern Carriage: Designed to hold multiple luminaires (e.g., 6 or 8 LED floodlights) (m) Ingress Protection: IP 55 for the junction box at the base, and IP 66 for the luminaires (n) Earthing/Protection: Lightning spike rod (min 1.2m long) and dedicated earth terminals (min 4 nos.) at the base (o) The work shall be executed under supervision of manufacturer's authorized rep only.

Supply and fixing LED flood light 120 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by the Engineer in charge.

Supply and fixing of outdoor type stand mounted feeder pillar with 63A TPN MCB incomer ,single dial time switch ,45A TP contactor for the automatic switching of luminaries ,power tool control with 2 nos 9A contactors and raise lower push button ,incoming 35sqmm and outgoing 16 & 2.5sqmm terminals complete all as specified and as directed by the Engineer in charge.

Supply and laying of cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 16 Sqmm 4 core complete all as specified and as directed by the Engineer in charge.

Excavation in trenches, not exceeding 1.5 m wide and n. exc 1.5 m in depth for laying of cable for soft/ loose soil and getting out complete all as specified and as directed by the Engineer in charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm apart for soft/loose soil complete all as specified and as directed by the Engineer in charge.

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and as directed by the Engineer in charge.

M&L for factory made un-reinforced pre cast concrete cable protection cover LV class type - I with size 250mm x 150mm x 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning, complete all as specified and directed by Engr-in-Charge.

M&L for clean dry Sand in cable cushioning in trenches for protection of cable including watering and consolidation complete all as specified and as directed by the Engineer in charge. Note: Only punned thickness shall be measured and paid.

M/S MUNEER HASSAN AKHON (BID ID -3492197)

M/S SHIV SHAKTI ENTERPRISES (BID ID -3498057)

M/S WEB COMPNAY (BID ID -3498335)

M/S Behl Sons (BID ID -3492383)