ADDN/ALTN OF BOUNDARY WALL BEHIND COOK HOUSE AT FAE UNDER GE MCEME SECUNDERABAD

Amount

Demolition of brick work /stone boulder of any description and in any position not othterwise specifically provided for, complete all as specificed and directed by Engineer-in-Charge.

Excavating in trenches n exc 1.5m wide and not exc 1.5m depth; for foundation, etc not exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm in hard and dense soil complete all as specified and as directed.

Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above starting point complete all as specified and as directed.

M &L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation/mass concrete for footing and steps complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, rough finished complete all as specificed and directed by Engineer-in-Charge.

M&L for reinforced cement concrete (design mix) M-25 in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specificed and directed by Engineer-in-Charge. Note:- Design Mix shall be got done from Govt approved lab and shall be got approved from the GE before starting of work.

M&L for formwork to sides of concrete pillars, posts, struts, piers, columns and stanchions , rough finished complete all as specificed and directed by Engineer-in-Charge.

M&L for reinforced cement concrete ( design mix) M-25 in columns, pillars, piers, posts and struts complete all as specificed and directed by Engineer-in-Charge.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc , rough finished complete all as specificed and directed by Engineer-in-Charge.

M&L for reinforced cement concrete ( design mix) M-25 beams, cantilevers, bressummers, lintels over 1.5m span complete all as specificed and directed by Engineer-in-Charge.

M&L for TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending, spirally for hooping for column hooking ends and binding with and including mild steel steel wire (annealed ) not less than 0.90 mm dia or seccuring with clips quility confirming to Deformed or twisted bars complete all as specificed and directed by Engineer-in-Charge.

All as per item No 12 , but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specificed and directed by Engineer-in-Charge.

M&L for brick work with fly ash, modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specificed and directed by Engineer-in-Charge.

M&L for Cement concrete type B- 0, 1:2:4 (12.5mm graded stone aggregate) for coping or chamfered on edges, complete all as specificed and directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:6, finished even and smooth without using extra cement complete all as specificed and directed by Engineer-in-Charge.

M&L for preparation of new plaster surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed

S&F in PVC (SWR) 100/110 mm bore single socketed pipes in any length with rubber ring joints, complete all as specificed and directed by Engineer-in-Charge.

S&F Mild steel angle iron as posts and struts in fencing including cutting tops to shape as directed, drilling hole including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E 165 complete all as specificed and directed.

Supply and fix Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) all as specified and directed by Engineer-in-Charge

Supply and fixing concertina coil fencing with punched tape concertina coil 600mm dia having 50 Nos rounds per 6 metre length, up to 2.50m height of wall on angle iron Y-shaped bracket placed 2.40m to 3.00m apart and horizontal barbed wire, stud tied with G.I staples and G.I clips to retain horizontal, etc with reinforced barbed tape/spring core (2.5mm thick) wire of high tensile strength of 165kg/sqmm with tape (0.52 mm thick) and weight not less than 43.478 gm/metre, all as specified and directed . Note:- Y angle iron bracket and horizontal barbed wire will be measured and paid separately.

M & L Preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specificed and directed.

Taking down old solar power fencing safely in all respect and rolled up all wire of fence and connected items and deposite in MES store yard all as specified and as directed by Engr-in-charge.

Supply and fix LED energy efficient security light fitting of capacity of 60 W including suitable dia GI pipe bracket for fixing the light on wall with all fixing arrengement complete all as specificed and directed by Engineer-in-Charge.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 16 sqmm 4 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this schedule 'A' part).

S & F hot press moulded SMC junction/ terminal box of size with internal diamentions of 200x140x95 mm with hinged door, incl of 2 way connector 415 V made out of polycarbonate and provosion for fixing of 1 No MCB SP of 6 Amps, drilling hole for cable connections, connecting incomming and out going cable by providing suitable size of cable lugs/ glands, fixing on wall with all fixing arrengement. Note :- MCB SP will be measured and paid seperately.

Supply and fix in repair MCB SP 6 Amps 240 volts for fixing on item No. 26 complete all as specificed and directed by Engineer-in-Charge.

S & F PVC insulated and unsheathed (ISI marked) stranded copper conductor 1.5 Sqmm size, 3 core round cable for street light connection from light fitting connector to the terminal box including PVC conduit of suitable size all fixing arrangement complete all as specified and directed.

Supply, spread sand of approval in cable trenches providing for cable cushioning as directed. NOTE :- Punned thickness of sand only will be measured and paid complete all as specificed and directed by Engineer-in-Charge.

Supply and lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm

M&L for 20 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced with 8 mm dia MS bars at 10 cm c/c, 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement all as specified. (Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.) complete all as specificed and directed by Engineer-in-Charge.

Supply and fixing of frame 1 street light panel for wall security light for 6 KW, three phase with GI Clamps and all fixing arrengements with cable entry for 16.00 sq mm with suitable size of terminals with (timer digital 24 hours, contactor rating 32 Amps, MCB rating 40 Amps TPN) all as specified and as directed . havells SAP Code IHXTS03060.and quivalent approved make. complete all as specificed and directed by Engineer-in-Charge. Note :- MCB TPN, contactor,& timer are deemed to be included in the quoted rate.

B AND H CONSTRUCTIONS

RV. Enterprises

SRI BHAVANI ENTERPRISES

SAI RUPA CONSTRUCTIONS

Vipin Kumar and Brother

NEWS CONSTRUCTIONS

STANDARD AGENCIES

KIRAN CONSTRUCTIONS