Electrical Work for Development of Tourism Facilitation Centre

Amount

INTERNAL ILLUMINATION Wiring: Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5/10 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover and MS box of suitable size as required, with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.

Primary light points.

Secondary light points looped from the above point

Twin control point

Ceiling fan point consisting of fan hook, modular switch & regulator and ceiling rose as per requirement.

Wall bracket / Exhaust fan point consisting of 5/10A modular switch and 6A socket/ceiling rose near fan.

Call bell point

Supplying and fixing of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc. as required.

Supplying and fixing of batten holder / BK angle holder ISI marked on the existing junction box / wooden block including connection etc. as required.

Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type)

Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required.

Supply and fixing of multiporpose board Modular type of 6Amp 2nos. Switch and 2nos. Socket with all connection.

Supplying and fixing of metal box (nominal size) on surface or in recess with suitable size of modular base and cover plate in front including providing and fixing 5 pin 15 / 16 amps socket outlet and 15 / 16 amps modular type switch, connection, etc as required.

Supply& fixing of Modular type 25 Amp one way switch and socket outlet for AC point with metal box and modular cover.

Supply, delivery, installation, testing and commissioning of TV Antenna/Telephone Outlet Boards containing a Modular TV Antenna/Telephone Socket fixed on Modular Concealed Box including connections and making good the damages caused complete as required and as per Direction of Engineer-In-Charge.

Supply, installation and & commissioning of dual occupancy sensor based on lighting control system so that lighting is turned off automatically if the daylight set point level is reached, or after reasonable time delay when a room or area is vacated by the last person to occupy said room or area. Products shall be manufactured by an ISO 9002 certified manufacturing facility. IEC 60669-2-1 / CE / Rohs compliant Y. Sensors shall have an operating temperature range of -5°C - +45°C. The work is included of all necessary wiring with 2x1.5 sq mm copper wire inside 20mm dia PVC condute from near By DB.

Submains:

Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm.

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in required dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire. exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm.

Recessed wiring to submain in 2 x 4.0sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in required dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire.

Recessed wiring to submain in 2 x 6.0sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in required dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x 2.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire

Recessed wiring to submain in 2 x 10.0sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in required dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x 4.0sq.mm FR PVC insulated single core multistrand copper conductor as earth wire.

Recessed wiring to submain in 4 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in required dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired

Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in required dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.

Recessed wiring to submain in 4 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 32mm dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.

Supplying and drawing TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in existing surface / recessed steel / PVC conduit as required.

Supplying and drawing two pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Control Panel: Supply, delivery, installation, testing and commissioning of indoor floor mounted type distribution boards made out of 1.6mm thick powder coated CR sheet steel duly acid treated for derusting, primered and painted with epoxy paint, dust, damp & vermin proved having hinged door with provision for cable entry, earthling studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete including necessary civil / fabrication work as required as per the direction of Engineer-in-charge. All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have ics=100% icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magenetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material.

Lift D.B. (Vehicle Lift) Incoming : 1 No 100A (25kA) 4P thermal magnetic release MCCB with ROM & Spreader links. Busbar : 4 Nos 160 Amp Copper Strips (CD=1A/sqmm) Instruments: 1 set of LED type phase indicating lamps with control fuses Outgoing : 2 Nos 80A 4P RCCB (300mA) for Lift motor & spare. 2 Nos 25A 2P RCCB (30mA) for lift car controll panel. 4 Nos 6A/10A SP MCB 'C' (10kA) for lift car light. Complete duly factory wired as per SLD

Lift D.B. (Passenger Lift) Incoming : 1 No 63A (25kA) 4P thermal magnetic release MCCB with ROM & Spreader links. Busbar : 4 Nos 100 Amp Copper Strips (CD=1A/sqmm) Instruments: 1 set of LED type phase indicating lamps with control fuses Outgoing : 2 Nos 40A 4P RCCB (300mA) for Lift motor & spare. 2 Nos 25A 2P RCCB (30mA) for lift car controll panel & spare. 4 Nos 6A/10A SP MCB 'C' (10kA) for lift car light & spare. Complete duly factory wired as per SLD

Pump House D.B. Incoming : 1 No 40A 4P TM MCCB (25kA) with ROM & spreader links Busbar : One set 63 Amp Copper Strips (CD=1A/sqmm) Instruments: 1 set of LED type phase indicating lamps with control fuses outgoing : 2 no 25A 4P 30mA RCCB for motor & spare. 2 no 10A-32A SP MCB 'C' (10kA) for light ckt. Complete duly factory wired as per SLD

Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.

Power BDB (4way Double Door TPN DB) incoming 1 no of 63A 4P MCCB outgoing 12 nos of 6-32A SP MCB as per SLD

Light DB (4way Double Door TPN DB) incoming 1 no of 25A 4P RCBO (100mA) outgoing 12 nos of 6-32A SP MCB as per SLD

Light BDB (6 way Double Door TPN DB) incoming 1 no of 63A TPN RCBO outgoing 18nos of 10-32A SP MCB as per SLD

Light BDB (12 way Double Door SPN DB) incoming 1 no of 40A 2P RCBO (100mA) outgoing 10nos of 10-32A SP MCB as per SLD

Cabling: Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge.

3 &1/2c x 400 Sq. mm Aluminum armoured cable.

3 &1/2c x 70 Sq. mm Aluminum armoured cable.

3 &1/2c x 50 Sq. mm Aluminum armoured cable.

3 &1/2c x 35 Sq. mm Aluminum armoured cable.

3 &1/2c x 25 Sq. mm Aluminum armoured cable.

4c x 16 Sq. mm Aluminum armoured cable.

Cable Termination: Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.

3 &1/2c x 400 Sq. mm Aluminum armoured cable.

3 &1/2c x 70 Sq. mm Aluminum armoured cable.

3 &1/2c x 50 Sq. mm Aluminum armoured cable.

3 &1/2c x 35 Sq. mm Aluminum armoured cable.

3 &1/2c x 25 Sq. mm Aluminum armoured cable.

4c x 16 Sq. mm Aluminum armoured cable.

Earthing: Earthing with G.I earth pipe 4.5 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required

Supply of materials and installation of chemical earthing size of chemical earth bar 2 mtr, size of earth pit 3' X 2' X 9' chemical compound to be used 50 kg. There is an arrangements for termination of copper strip of earth continuity conductor including cost of water pouring arrangements, brick masonary enclosure on top with removable cast iron cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. (For Lift earthing)

Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.

6 swg G.I wire

8SWG HDBC Wire in non mettalic conduit

Fittings & Fixtures Installation and testing of following types of fluorescent tube fixtures directly on wall / ceiling of building with all accessories such as electronics ballast, fluorescent tube lights, stove enamelled box, perpex sheet cover etc complete assembly including supply & fixing of teak wood round block and making connection from the suitable point outlet as per the direction of Engineer-in-charge.

Supply, delivery, installation, testing & commissioning of extruded aluminium batern 4ft long 20w LED fitting.

Supply, delivery, installation, testing & commissioning of extruded aluminium batern 2ft long 10w LED fitting.

Supply, delivery, installation, testing & commissioning of 65w surface mounted LED Green Bay on roof .

Supply, delivery, installation, testing & commissioning of surface mounted 15w LED fitting.

Supply, delivery, installation, testing & commissioning of 7w LED Bulb on existin holder

Supply, delivery, installation and testing of 12w LED recessed mounted step light of cast aluminium lighting fixtures, stainless steel screws, glass diffuser, corrosion and UV ray resistant coating and rubber gasket

Supply, delivery, installation, testing & commissioning of robust and reliable 7w LED bulkhead IP65 protection and IK09 resistance suitable for surface and wall mounting application.

Supply, delivery, installation, testing & commissioning of fully difused recessed mounted 2'x2' LED lumiaire 36W

Supply, delivery, installation, testing & commissioning of ultra sleek recessed downlight 10w LED fitting.

Supply, delivery, installation, testing & commissioning of ultra sleek recessed downlight 6w LED fitting.

Supply, delivery, installation, testing & commissioning of recess mounted COB- based, tiltable downlight with multible beam angle 6w LED fitting.

Supply, delivery, installation, testing & commissioning of 5 meter long indoor LED strip light.

Supply, delivery, installation, testing & commissioning of BEE Star rated 1200mm sweep cealing fan

Supply, delivery, installation, testing & commissioning of wall mounting fan 400mm sweep

Supply, delivery, installation, testing & commissioning of single phase 600mm sweep 900 RPM heavy duty Exhaust fan

Supply, delivery, installation, testing & commissioning of metal Exhaust fan 12" sweep

Supply, delivery, installation, testing & commissioning of plastic Ventilation fan 200mm sweep

Supply & Fixing of electronic call bell ding dong two modular on entrance door way and as per the direction of Engineer-in-charge or Consultant.

SUBSTATION 11 KV LINE: Supply of all Materials, Labour and Stringing of 11 KV Overhead Line with, 55 mm2 Insulated Aluminum Conductor, on 100 X 116 mm RS Joist 10 Mtrs. long complete with required Insulators, Cross Arms, Stays Set complete as per site requirement and Direction of Engineer-In-Charge.

DP STRUCTURE Supply Installation Testing and Commissioning of DP structure for 1x250 KVA Substation, 11 KV underground HT Line & metering unit complete with required size of channels and angles for mounting of AB switch and HG fuse with required size of nuts & bolts. 11KV 3 pole on load isolated air brake switch complete with knife blade switches both Male/Female, operating GI pipe with handle & rotating mechanism. Pad locking arrangement with pad lock. Interconnecting AB switch OH line with 30sqmm AAC conductor & interconnection to pin insulator/HG fuse set by suitable Cu flexible strip. Spring earth of the handle, earthing of switch etc along with 11KV 3 pole horn gap fuse set on the double pole structure. 11KV HG fuse set should be complete with 11KV insulators Cu horn gaps etc. Interconnection of HG fuse with transformer with "0" SWG HDB Cu conductor and 12KV lighting arrester including interconnection by 30sqmm AAC conductor & clamp complete as required with binding using all types of binding wires and painting with red oxide/aluminium/black paint complete as required and direction of Engineer-in-Charge along with following items: 1. Supplying and erection of 05 Nos. 100X 116X RS joist pole of 11m long each weighing 257.4 kg. (23.4 kg/mtr) 2. Erection of 05 Nos. metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. 3. 11 KV GI pin and pin insulator 4. 11KV Disc Insulator with necessary hardwire fitting. 90 KN (B & S type)

Transformer Supply installation testing and commissioning of 250 KVA, 11KV/433V Copper winded Transformer (three stars rated) with manual tap changing regulator (-2.5% to +7.5%) and E&MR Testing with necessary hardware as required.

CABLES Supply & laying of 3.5 core 400sqmm aluminium armoured 1.1 kV grade PVC insulated Armoured cable

Earthing Earthing with G.I earth pipe 4.5 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required (For Body, Lightning Arrestor & DP of Transformer)

Supply and Installation of Safe Earth Electrodes (Chemical Earthing) including cost of Electrode, Earthing Compound, Excavation of Earthing Pit, Refilling, etc. as required (For Neutral) complete with all materials and accessories as required.

Earthing Accessories Supplying and laying of 25x6mm & 50x6 GI Flat for earth conductors including fixing accessories, stainless steel bolts, nuts and washers complete as required.

25 X 6 mm GI Flat

Supply of Materials and laying Underground / Floor/ Wall including making End Termination and Testing of 8 SWG HDBC WIRE in non-metallic conduit for loop earthing of equipment’s, switch boards & panel with providing and fixing of Copper strip Flat (25x5) on surface or in recess as required complete with all accessories as per direction of Engineer-in-charge.

Safety Equipment

Supply and hanging of Shock Treatment Chart duly Laminated.

Supply & Laying of 8 mm Thick Rubber Mat, ISI mark of 1100 V Grade.

Supply and Installation of 3 Nos. Fire Buckets on a Mild Steel Stand complete as per specification and requirement of Fire Safety Provisions.

Supply and Installation of 5 Kgs. Capacity CO2 type Fire Extinguisher complete as required.

Providing and fixing bi-lingual Danger HT notice board of 250mmx200mm as specified below, made of mild steel at least 2mm thick & vitreous enamelled signal red colour on both sides as background & with inscriptions in enamelled vitreous white colour on front side for lettering as required.

Supply and fixing of heavy (C class) 100 mm dia GI Pipe.

EXTERNAL ILUMINATION DB-External Light Supply, delivery, installtion, testing and commissioning of indoor floor mounted type distribution boards made out of 2mm thick CR sheet steel duly acid treated for derusting, primered and painted with epoxy paint, dust, damp & vermin proved having hinged door with provision for cable entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete including necessary civil / fabrication work as required as per the direction of Engineer-in-charge. Incoming: 1 40A 3P+NL MCCB (25 KA) type isolator followed by 1 No 70-A 3P AC3 duty power contactor with Bypass Toggle switch. Bus bars: 4 Nos.20x3mm E C Strips Outgoing: 4 Nos 40-A, 3PN MCB 'C'of 6 nos 6-32 Amp 2P MCB 'C' (10 KA) Complete duly factory wired as per SLD

Junction Box Supply, installation and testing of Hensel make IP65 (dust & water proof) (in accordance to 60 529) junction box, made of high Hensel make IP65 (dust & water proof) (in accordance to 60 529) junction box, made of high quality Thermoplastic (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of Polyurethane, should withstand glow wire test at 9600c, should be flame retardant, 1. 139X119X70 mm fitted with 6sq.mm Stud type terminal with 4nos IP65 Polyamide Glands 1500.00

Earthing Earthing with G.I earth pipe 4.5 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required

Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required

Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.

6 swg G.I wire

CABLES: Supply, laying & testing of following size of solid Aluminum conductor upto 16 SQ mm /XLPE insulated PVC Tape innersheathed ,Armour, 650/1100 V grade as per IS 7098 (PART 1) 1988, PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge.

4c x 16 Sq. mm

4c x 10 Sq. mm

4c x 6 Sq. mm

2c x 10 Sq. mm

2c x 6 Sq. mm

Cable termination: Supplying and making of all materials for terminations of 1.1 KV grade copper/aluminium multicore cables of the following sizes. The work includes cable glanding using brass plated single compression glands, sizing the core leads, removing insulation, fixing suitable crimping type copper lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals.

4c x 16 Sq. mm Aluminium armoured cable

4c x 10 Sq. mm Aluminium armoured cable

Accessories Supply & installation of 40mm dia 2mm thick PVC Conduit with fittings such as bends, elbows, reducers, chase nipples, split couplings, plugs etc. as per site requirement.

GI pipe 2" dia for Road Cross

Fittings & Fixtures Supply, delivery, installation and testing of 3.6 metre high LED 30 watt post top light of cast iron base, mild steel coloumn, cast aluminium lighting fixture, acrylic difuser, stainless steel screws, corrosion and UV ray resistant coating with foundation and all fixing accessories.

Supply, delivery, installation and testing of 170mm dia 780mm high 9w LED Bollard of alluminium lighting fixtures, acrilic diffuser, stailess steel screws and Pole, corrosion and UV ray resistant coating with with foundation and all fixing accessories.

Supply, delivery, installation and testing of out door type of cast aluminium housing, stainless steel screws, corrosion and UV ray resistant coating with 18 watt LED bulb and with all fixing accessories for bathing complex.

Supply, delivery, installation and testing of LED 40 watt post top light of cast aluminium housing, stainless steel screws, corrosion and UV ray resistant coating with all fixing accessories for entrance gate.

Supply, delivery, installation and testing of LED 5 watt step lights of cast aluminium housing, stainless steel screws, acrylic diffuser, rubber gascate, corrosion and UV ray resistant coating and with all fixing accessories.

Supply, delivery, installation and testing of bulkhead lights of cast aluminium housing, stainless steel screws, acrylic diffuser, CRC back plate, corrosion and UV ray resistant coating with 12 watt LED bulb and with all fixing accessories

LIGHTENING ARRESTER Supply of Active Lightening arrestor of Class A for building protection .It shall work on early streamer Emission princeple & shall be made of stain less steel with a ∆T of 60 micro sec(ABB OPR 60 or equivalent) A non reset table type counter (FLASH COUNTER) shall also be supplied to count the number of lighting occurrences.

Supply of mounting plate for mast of 3 mtr with guy wire & base plate

Supply of flash counter for the above device

Supply of all materials, installation & testing of Copper safe earth electode ( chemical earthing) with earthing electode of 3 metre long 50mm diameter hot dip galvanised pipe confirming IS:3043 including cost of 50kg chemical filling compound, masonary enclosure, C I cover, labour charges for excavation of pit in all kinds of soil complete as required.

Supply of materials and laying under ground / floor through prelaid GI pipe and fixing to the wall supported on porcelain base insulators at an interval not exceeding 500mm including making connection to plate earthing and required brazing at joints with 25mm x 6mm size of copper flats for earthing of Lightening Arrestor as required comlete as per direction of Engineer-in-charge.

Installation of Class A device on the top of building. The device shall be installed at a height of about 3 mtrs from the roof top of the building using a GI mast. The device shall be connected to the earth pit using copper tape of 25 mm x 3 mm or better. This copper tape shall be run firmly along the side of the mast with the help of spacers.It shall also be ensured that this down conductor shall not touch the building throughout. The down conductor shall be connected to the earth electrode using Exothermic welding. A counter shall be installed at an appropriate place to count the number of occurrences. All the accessories like spacers, welding materialetc required for the installation shall be arranged by the ABB or equivalent only.

M/s. B.K. GIRI

HKE ELECTRIC CONTRACTS

Shahi Electric Engg Co Pvt Ltd

M/s New Hi-Tech

B.C.BHUYAN CONSTRUCTIONS PVT. LTD.

ABC CONSTRUCTIONS