REPAIRS TO JOINERY AND FLOORING OF BUILDINGS AT BHAGUR AIRFIELD IN AOR AGE B/R CENTRAL UNDER GE DEOLALI

Amount

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for brick work with fly ash old size bricks, straight or curved on plan n.exc 6m mean radius, built in cm 1:6 complete all as specified and directed.

M & L for except brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius with old size bricks in CM 1:6 complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on brick masonry wall in cement mortar 1:4 finishing the surfaces even and smooth( without using extra cement) complete all as specified.

M&L for applying two coats of cement base paint over chalk whitening over newly plastered surfaces of walls including preparation of surfaces all as specified.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with Shutters (without taking off shutters from the frame 1.50 Sqm and n exc 4.00 Sqm each complete all as specified and directed

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

S & F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members complete all as specified and directed.

S & F 2nd class HW shutters 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repair Aluminium alloy wire cloth,0.45mm nominal dia of wireand average width of aperture1.40mm and fixed withaluminium wire staples on ceiling ht not ex. 15mtr

S & F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed

S & F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed

S&F in repair 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed

M&L 250 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

M & L preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primerprimer complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L Vitrified ceramic tiles (light shade) 8 to 10mm thick (square / rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in cement mortar 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

Ditto all as above but in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed

Preparation of old surfaces including filling of cracks/holes by crack filler, removing unnecessary nails and applying 02 coats of Oil bound distemper (light shade) @ 12 sq.m/litre/2 coats to interior wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer by using following brands and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Internal Emulsion : Asian / Berger / Nerolac

Preparation of old plasteres surfaces including crack filling with Smart Care textured crack filler, removing unnecessary nails and applying 01 coat of cement base paint walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces as recommended by manufacturer of complete all as specified and directed.

M/s. JBSR ENTERPRISES.

M/S Nilesh Enterprises

ANAY ENTERPRISES

M/S R.K.S. CONSTRUCTION

J Sams Contructions

M/S YOGESH CONSTRUCTION

Alpha Construction

Ranmale Developers

BHUSHAN BHIMRAO PATIL

sunway associates