Construction and mainteance of L206-RD Road Lileri (OR-27-906) under PMGSY IV (Batch-I)

BTRoad Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD technical specification cluase 201.1. & direction of Engineer-in-charge (by manual means).

Construction of embankment with approved material obtained from borrow pit with lift up to 1.5 m transporting to sites, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Clause 301.5 of MoRD specification for rural roads & as per direction of the Engineer-in-Charge.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per MORD technical Specification Clause 301 and direction of the Engineer in Charge (excluding cost of excavation and transportation to site).

Excavation of roadway in ordinary rock with hydraulic excavator including cutting and loading in tippers, transporting to embankment site with all leads and lifts, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.of MORD and as per direction of the Engineer-in-charge.

Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, inaccordance with requirements of lines, grades and cross sections, and transporting to the embankement location with a lift of up to 1.5m and lead up to 1000m as per techincal specification clause 302.3

Excavation of roadway in hard rock (blasting prohibited) by drilling, blasting and breaking loading and disposal of cut rocks with all leads and lifts trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302 of MORD and as per direction of the Engineer-in-charge.

Excavation of roadway in hard rock (requiring blasting) by drilling, blasting and breaking loading and disposal of cut rocks with all leads and lifts trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302 of MORD and as per direction of the Engineer-in-charge.

Fine dressing &Turfing including transportation of turfs by mechanical means with all leads & lifts and placing of turfs in position and ramming with thapies including watering and cost of labour & all materials etc. complete as per direction of Engineer - in - charge.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with ordinary motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density and C.B.R>20, complete as per Technical specification clause 402 of MORD specification for Rural Road and direction of the Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade & camber, applying & brooming, crushable moorum sand addmixture to fill up the interstices of coarse aggregate, watering & compacting to the required density as per Clause 405 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer in Charge. Grading -III