Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.6 LAccepted-AOC NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹51.1 L+₹4.1 L (8.64%)Rejected-Finance | L2 | Rejected-Finance Other than being Lowest | |
| 3 | L3₹52.4 L+₹5.4 L (11.5%)Rejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L3 | Rejected-Finance Other than being Lowest | |
| 4 | L4₹56.1 L+₹9.0 L (19.2%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L4 | Rejected-Finance Other than being Lowest | |
| 5 | L5₹57.7 L+₹10.7 L (22.7%)Rejected-Finance T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Other than being Lowest |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
9 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
CERTAIN REPAIRS AND MAINT TO VARIOUS B/R WORK SERVICES TO CERTAIN SAILORS ACCN NEAR MES BLOCK AND REPAIRS TO RAILING AND STAIR CASE COMMON AREA OF BLDG AT NEW NAVY NAGAR UNDER AGE B R I NAVY NAGAR COLABA MUMBAI
2022_MES_567364_1
8107/CWE (NW) Mumbai/ E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar
Class C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Navy Nagar
₹1.6 L
Yes
8 Mar 2023
5 Dec 2022
11 Jan 2023
5 Dec 2022
9 Jan 2023
26 Dec 2022
5 Dec 2022 - 24 Dec 2022
Amount
Taking down cement plaster of any description including racking out joints hacking for key scrubbing down with water & remove debrises outside MD land complete all as specified and directed by Engineer-in-Charge.
Material and Labour Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (10+10mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately) complete all as specified and directed by Engineer-in-Charge.
Material and Labour rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches complete all as specified and directed by Engineer-in-Charge.
All as per Item No 3.00 above but 10mm thick in CM (1:3) in ceiling complete all as specified and directed by Engineer-in-Charge.
Material and Labour applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height complete all as specified and directed by Engineer-in-Charge.
Material and Labour preparation of new undecorated surfaces of walls,soffit fascia of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.
Material and Labour for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Material and Labour applying two coats of white wash on new plastered surfaces including preparation of surfaces as in ceiling complete all as specified and directed by Engineer-in-Charge.
Material and Labour applying one coats of white wash on old plastered surfaces including preparation of surfaces as in wall complete all as specified and directed by Engineer-in-Charge.
All as per item No 9.00 above but on ceiling complete all as specified and directed by Engineer-in-Charge.
Material and Labour applying one coat of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete complete all as specified and directed by Engineer-in-Charge.
Material and Labour applying two coats of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete complete all as specified and directed by Engineer-in-Charge.
Material and Labour preparation of old undecorated surfaces of walls,soffit Fascias of chajjas etc and applying one coats of weather proof Acrylic based paint(100% Acrylic) exterior grade complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.
Material and Labour applying one coats of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed by Engineer-in-Charge.
Material and Labour preparation of old painted surfaces over 10cm width or girth and applying one coats of synthetic enamel paint on steel surfaces complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding layer in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering as backing layer in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
Material & labour for glazed ceramic tiles in vertical surface 300x450x7 to 8 mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. by Engg-In-Charge
Material & labour for non skid coloured jointed free ceramic tiles of size 600mmx600mmx10mm thick in floors over and including 20mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. by Engg-In-Charge
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.
Material and Labour machine cut pre-polished kota stone slab 20-25mm thick in riser of steps, skirting, dado windows cill and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of existing floor finish complete all as specified and directed by Engineer-in-Charge.
Material and labour for Granite(of any type) 18-20mm thick slab laid on floor machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over 15 mm thick screed bed in cement mortar (1:6) including grinding & polishing complete all as specified and directed by Engineer-in-Charge.
All as per item No 23.00 above but on wall skirting /dado over 15 mm thick Cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
Material and Labour udaipur green/baroda green marble slab 18-20 mm thick over similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding and polishing complete all as specified and directed by Engineer-in-Charge.
Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge.
Extra for forming grooves over granite or kota stone slab as in staircase complete all as specified and directed by Engineer-in-Charge.
Demolition of concrete of any description and in any position not otherwise specifically provided for including china mozaic, WC etc. removing the debris from MD complete upto 4 storey complete all as specified and directed by Engineer-in-Charge.
Material and Labour for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors complete all as specified and directed by Engineer-in-Charge.. (Note : WPC shall be measured and paid seperately)
Material and Labour cement concrete 1:7:12 Type F2 with with 40mm graded stone coarse aggregate in sunken floor complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repair soap dish stainless steel and fixed with screw including wooden/plastic cleats complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs PVC connectors of 15 mm size with PTMT nuts of length 600 mm length complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs PVC waste pipe of 32 mm dia 800 mm length complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including making good to floor complete all as specified and directed by Engineer-in-Charge..
Supply and Fixing in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repair Sinks with drainage board made of stain less steel 1mm thick, kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed by Engineer-in-Charge.
All as per item No 38 above but, without drain board overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair Kitchen plate rack made out of 1mm thick stainless steel of size 750mm x 600x 200mm complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair 10 ltrs capacity PVC valveless, syphonic action type,flushing cistern,low level,white,with inlet ,ball valve, float and handle including 600mm PVC connector pipe and flush pipe (long bend) for low level cistern complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws & wooden/plastic cleats(Minimum weight 190 gms) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair PTMT shelf fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 300 gms) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair PVC cabinet size 450x600mm with looking mirror in white colour complete complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs Stainless sink coupling of external 110mm dia along with necessary fittings complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs CP grating of size 125 mm complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs cupboard/drawer pulls, 3 screw plate with fixed dished pull, 80 mm to 100mm long handle brass type complete all as specified and directed by Engineer-in-Charge.
Material and Labour in repair aluminium powder coated drapery rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) complete all as specified and directed by Engineer-in-Charge. (Make : as approved by GE)
Supply and Fixing aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed by Engineer-in-Charge.(Make : as approved by GE)
Supply and fixing in repair of 04 pieces pulley operated Cloths Drying system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.00 mtr with pulley made up of devil mounted and fixed with self tapping screw. Rope will be HDPE double core of 4 mm with rope Guide at locking system to hide rope. Channel to be dia of minimum weight of pipe shall not be less than 0.20 kg/Rm and maximum weight of Pipe in one unit not less than 2 kg. Weight of rope shall be not less than the 550 gms / mtrs including taking down old unserviceable cloth hanger complete all as specified and directed by Engineer-in-Charge. Make :- As per sample approved by GE
Taking down and refixing PVC profile suitable for 275 ltrs loft tank including fixing of aluminium channel around the profile complete all as specified and directed by Engineer-in-Charge.
Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
Material and Labour Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thk in flooring, complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing mild steel Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming including working platform/scaffolding) conforming to Fe 290 Gde E-165. complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing mild steel Framed brackets of angles or tee with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary gusset plates, riveting etc nexc each 10Kg bracket confirming toFe 290 Gde E-165 including working platform/scaffolding) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing mild steel rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafter and running rails etc complete conforming to Fe-410- W(Gde?E-250) quality?B including working platform/scaffolding) complete all as specified and directed by Engineer-in-Charge.
Material and labour mild Steel work in tubular railing including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including working platform/scaffolding) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete all as specified and directed by Engineer-in-Charge.
Material & Labour for preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. by Engr-in-Charge.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.
Material and Labour pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) complete all as specified and directed by Engineer-in-Charge.
Material and Labour pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102 complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame including hacking out broken glass panes of any description from wooden frames or aluminium fixed with beads complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair 100mm stainless steel Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed by Engineer-in-Charge.
Resecuring or easing & adjusting of shutters, without taking down but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by Engineer-in-Charge.
Resecuring or easing & adjusting shutters , without taking down upto 1 sq. m each complete all as specified and directed by Engineer-in-Charge.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed by Engineer-in-Charge.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm and n. exc 4.0 Sqm each complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exceeding 1 Sq. M and not exc 2Sq.M each at any storey of building complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.
Suppling and fixing 2nd class hardwood 35mm thick glazed and skelton shutters, open rebated and prepared to receive wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh etc, sizes of members of shutters as specified in SSR complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 2nd class hard wood 35mm thick factory made plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial or 12mm veneered particle board with commercial veneer on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressured treated upto 9 storey complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Cup-boards shutters and shelf made with 19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work including 6mm teakwood lipping complete all as specified and directed by Engineer-in-Charge upto 12 storey of bldg.
Supply and fixing 2nd class hardwood bullnosed splayed, chamfered or rounded on edge fillets rectangular in section, sectional area exc 6 but n. exc 13 Sqcm fixed in repairs fixed with nails complete all as specified and directed by Engg-In- Charge
All as per item No 85 above but sectional area exc 13 sq cm and not exc 25 sq cm complete all as specified and directed by Engg-In- Charge .
Supply and Fixing Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm at any storey of building complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 100mm stainless steel Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.
All as per item No 90.00 above but 125mm complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.
All as per item No 92.00 above but 100mm complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed by Engineer-in-Charge.
Material and Labour preparing new wood or wooden surfaces over 10 cm of width or girth and applying two coats of synthetic enamel paint over a coat of pink primer upto 9 storey complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair Aluminium anodised section 15 micron for window (Sliding type) / ventilator (Partly fixed party louverd type) etc of anodised aluminium section ventilators partly fixed partly louvered type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, levered aluminium sections for louvered glass, rollers , handle etc including taking down u/s one, ccomplete all as specified and directed by Engineer-in-Charge. Note : (a) Glazing shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of the aluminium handle, locking arrangement including complete packing with silicon gel around contecting surface of aluminium and including matching the existing surface area complete complete all as specified and directed by Engineer-in-Charge. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c .
Supply and Fixing 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair/ replacement of 15mm bore internal steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall including work to be done up to 15 th floor in high rise buildings in short piece/length, including breaking the existing brick wall for replacement of corroded GI pipe in/ on wall and making good the disturbed surfaces to match previous structure with complete all as specified and directed by Engineer-in-Charge
All as per item No 99.00 Above but 20mm bore complete all as specified and directed by Engineer-in-Charge.
Disconnecting existing water tanks, exc 500 but n exc 1000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as directed by Engr in Charge ( cleaing/repairing measured separately )
Disconnecting existing water tanks, exc 1000 ltrs but n. Exc 2000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as directed by Engr in Charge ( cleaing/repairing measured separately )
Removal of existing water proofing treatment of the roof, cleaning with wire brushes etc including demolition of PCC padding of any description and in any position complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) mixed with Shali Plast LW+ of STP/Pidilite URP of Dr. Fixit or Equivalent and appoved as per manufactures instruction. Before laying concrete surface shall be cleaned and a bond coat of slurry with Shali Crete URP (of STP) or quivalent with cement to be applied. Alll cracks in slab to be openend in 'V' groove and filled with Shali Fix RMC a Polymer Morter of STP/ equivalent complete all as specified and directed by Engineer-in-Charge..
Material and Labour for 20mm thick rendering in CM 1:4 with the addition of Shaliplast LW+ @ 200ml per bag of cement on fair faces of brick or concrete surfaces all as directed by Engr-In-Charge.
Material and Labour for protecting the roof including parapet wall with water proofing coating ,complete as specified below: (a) Clean the surface and apply one coat of primer (STP Shali Urethane BTD diluted in water in 1:1 ratio and applied @ 400 gm/sqm OR Dr, Fixit primeseal diluted in water in 2:1 ratio and applied @ 7-8 sqm/ltr) and allows to dry for 6 to 8 hrs. (b) Apply first coat of water proofing coating over primer surface (Shali Urethene BTD with non butuminous bleding of STP Ltd. @ 1 Sqm/Ltr without dilution OR Dr. Fixit New Coat without any dilution @ 2 Sqm /Ltr) (c) Lay Non woven fiber glass mesh (Reinforcement of Shali Geo Text 40/50 gsm of size 2.5mm x 2.5mm) or equivalent with overlap of 50 mm on both direction while the first coat is still wet. (d) Apply second coat of water proofing coating as per manufactures instruction after 6-8 hrs of drying of first coat. (e) Apply third coat of water proofing coating (as per manucturer instruction) after 6-8 hrs of drying of second coat. The total thickness of 1 to 1.2mm must be achieved after 7 days of air cure. Note : 1) The colour of each coat shall be as directed by GE. 2) The work shall be carried out by aithorised applicator only 3) Water proofing to rain water spouts to be done as per manufacturer instruction
Material and Labour for Writing letters of figures (Block, Roman, Italic or Indian) exc 60 cm but not exc 90 cm high using two coats of Acrylic paint exterior grade (100%) acrylic over a coat of primer including preparation of surfaces of walls etc specified on external surfaces. (letter writing shall be done at isolated locations at height not more than 10 m above Ground level) complete all as specified and directed by Engineer-in-Charge.
Grubbing up and uprooting of trees / plants from external walls of bldgs pouring muratic acid for burning risidual roots in any. Racking out the dead roots from plants / concrete joints upto its penetrated portion and filling with PCC (1:2:4) 12.5 mm graded aggregate and finishing the surface with 15mm rendering in CM (1:4) including necessary hanging arrangement complete all as specified and directed by Engineer-in-Charge..
Material and Labour coloured glazed parking tiles 300 x 300 x 10 mm thick, glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:4 complete all as specified and directed by Engineer-in-Charge..
Material and Labour 100 mm thick PCC 1:2:4 type B-1, (using 20 mm graded agg ) as flooring laid in alternate without using extra cement on surface complete all as specified and directed by Engineer-in-Charge.
Material and Labour machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
Cutting holes in brick walls but in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement lime mortar in cm 1:2;4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts complete all as specified and directed by Engineer-in-Charge.
Material and Labour MS works in holdfast made of fe -290 complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed 125 mm length complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Aluminium handles, cast type, anodised of length 100 mm complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 75mm size stainless steel medium weight butt hinges complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.
All as per item No 118.00 above but on ceiling complete all as specified and directed by Engineer-in-Charge.
Demolation of brick work built in cement mortar of any description complete all as specified and directed by Engineer-in-Charge.
Material and Labour brick work with subclass B brick straight or curved on plan exc. 6m mean radius, built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair 100mm extruded barrel tower bolt complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 125mm extended aluminium handles, fabricated type anodised fixed in repair complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 100mm extended aluminium handles, fabricated type anodised fixed in repair complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing CP brass pillar tap 15mm, screwed down high pressure fancy type complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 32 mm dia waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing PVC waste pipe of 32 mm dia 800 mm length complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs CP grating of size 100 mm complete all as specified and directed by Engineer-in-Charge.
Material and Labour for stainless steel special alloy grade 304 pipes as in railling incl required cutting, notching organ welding, riding and drilling counter sunk holes and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and polishing including dismantling old unserviceable MS steel railing etc complete all as specified and directed by Engineer-in-Charge.
Material and Labour SS grade 304 circular base plate 100mm dia, 4mm thick incl circular sunk drilling holes, welding to MS base plate etc complete all as specified and directed by Engineer-in-Charge.
Material and Labour stainless steel grade 304 circular cap plate 110 mm dia 6 mm thick incl welding to ss pipe, buffing & grinding etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 3mm thick Aluminium composite panel cladding plain of approved colour/shade to facia of slab/beam/column/slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25 x 25 mm not exceeding 900 mm c/c on MS pipe purline/rafter/column beam/slab to hold ACP cladding etc including takingdown old unserviceble aluminium composite panel. (Note : Colour / Pattern of ACP sheet shall be as approved by GE) complete all as specified and directed by Engineer-In-Charge
Supply and Fixing toughened glass 12 mm thick as in door shutter inlcuding necessary SS hingescomplete all as specified and directed by Engineer-in-Charge including taking down old u/s glass.
Supply and Fixing Solar control film 50 micron reflective type (gareware sun control or equiva?lent) including taking down old U/S filmcomplete all as specified and directed by Engineer-in-Charge..
Supply and fix Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop at of primer erected in position as indicated complete push pull or manual type thickness of lath is 1.25mm including taking down old shutters complete all as specified and directed by Engineer-in-Charge.
Taking down and refixing of steel rolling shutters after carryout necessary repair greasing,top cover, anchoring rod, hasp and staple and erected in position as indicated, complete all as specified and directed by Engineer-in-Charge.
Material and Labour in repair suspended false ceiling system using chicogo metalic (E grid) exposed suspended system, grid system section size 600mm x 600mm comprising of GI power coated main runner of dimension 39mm x 24mm x 0.80mm thick (thickness comprising of GI/0.4+pppcgs/0.3mm & weight of runner 1.35 Kgs for 3600mm length ) crosss tee of dimensions 29mm x 24mm x 0.80mm thick wall angle 22.2mm x 22.2mm x 0.65mm thick (thickness comprising of GI/0.3+pppcgs/0.3mm & weight of runner 0.70 Kgs for 3050mm length ) with and including 6mm thick HPSC(High pressure steam cured ) pre-primed, self embossed textured designed board, water resistant, termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid sustem duly suspended with 6mm dia GI bars hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt 0.007 Kgs/Clip) hold down clips (Wt 0.0035Kg/Clip) including taking down u/s one complete all as specified and directed by Engineer-in-Charge. by Engr-in-Charge. (Make : Everest or other equivalent as approved by the GE.
Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty (150 Kg load capacity) and fixed including taking down old u/s one complete all as specified and directed by Engineer-in-Charge.
Material and Labour for one coats of floor paint (Indigo or Equivalent) on old surfaces of chequered tiles/paver blocks in floor including brooming and cleaning the surfaces with water complete all as specified and directed by Engineer-in-Charge.
SATYANARAYAN CONSTRUCTION
BOB ENTERPRISES
RAMESH ENTERPRISES
Shetty Construction Co
S S ENTERPRISES
M/s. MAYUR ENTERPRISES
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .