Construction of Conference Hall of Animal Husbandry Department at Chamba.

Amount

Dismantling G.I. Sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials up to any lead as per the direction of the Engineer-in-charge and other incidentals.

Dismantling wood work. Wrought framed and fixed in frames other frames and trusses of span upto 10m ( ten metres) and height between ridge and floor level stacking the serviceable materials and disposal of un-serviceable materials up to any lead as per the direction of the Engineer-in-charge and other incidentals.

Dismantling wooden boardings upto any thicness in lining of walls and partitions including frame work and stacking the materials up to any lead as per the direction of the Engineer-in-charge and other incidentals.

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing in all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification 1990 Vol.I. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness within all leads and lifts within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone agreegate 20 mm (twenty millimetre) nominal size) design mix to obtain minimum copressive strength of M-20 (M-Twenty) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in Suspended floor, roofs, landing, shelves and their support balconies, beams, girders, bressumers and cantilever upto floor all level within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing tor steel reinforcement for reinforced cement concrete work including straightening, bending, binding and placing in position complete with cost of binding wire within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Second class brick work using common brunt clay building bricks of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Half brick masonry using second class common brunt building brick of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:4 (one cement isto four sand) within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and Fixing 40mm (forty millimetre ) thick panelled and glazed shutter with panel of 12 mm (twelve millimetre) thick partical board up to lock rail and 6mm (six millimetre) thick glass panes above lock rail in 2nd class deodar wood within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 35 mm (thirty five millimetre) thick flush door shutters interior grade, commercial type, core of block-board of both side commercial decorative phenol bonded cantuary / Alpro / Duro Ply / Green ply ISI mark No. 2202 construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters as per specification and as per the directions of the Engineer-in-charge including all taxes and carriage of material within all leads and lifts and other incidentals.

Providing and fixing M.S. plain grills of required pattern in wooden frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying vibro hydraulic compressed and polished precast terrazo tiles 20mm (twenty millimetre) thick of 300mm X 300mm (three hundred millimetre into thre hundred millimetre) size ISI mark No. 1S237 with 70% (seventy percent) white and 30% (thirty percent) grey cement with marble chips ratio of 55% (fifty five percent) white and 15% (fifteen percent) each of green, yellow and maroon shade of specified sizes laid in floors, treads of steps and landings on a bed of 25mm (twenty five millimetre) average thicknes of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete including carriage of material. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying spartic ceramic tiles 5.5mm (five point five millimetre) thick make of Kajaria make 300mm X 300mm (three hundred millimetre into three hundred millimetre) size in flooring, treads of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 ( one cement isto three sand) finished with flush pointing in white cement including carriage of material within all leads and lifts as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

White glazed tiles 6mm (six millimetre) thick make of Kajaria/Somany in dado, skirting of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Supplying and fixing 5 mm (five millimetre) thick glass panes with putty and nails including removal of broken glass panes wherever necessary within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing M.S. B.P. sheet 1.66mm (one point six six millimetre) to 2mm (two millimetre) thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separtely) including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 0.60mm (zero decimal six zero millimetre) thick made of cold rolled steel with epoxy of 25 micron prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron primer coating and back coat of polyster of 5 micron over 5 micron primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia and prepainted G.I. limpet and rubber washer complete with all accessories as required as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in gratings framed gaurd bars, ladders, railing, brackets and similar works including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty millimetre) dia welded in straight length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be measured & paid separately) including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 40 mm (forty millimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five G) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windows including bright finished black enamelled iron hinges with necessary screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing steel door, windows, ventilaters and clerestory windows frame manufactured from M.S. channal 75x40mm (Seventy five into forty millimetre), size vertically welded with M.S. flat 75 X 4mm (Seventy five into four millimetre) for central frames with split to end tail to each jambs including joints and miterd and welded with 16 X 3.15mm (Sixteen into three point five millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete block 15cm X 10cm X 10cm (Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate twenty millimetre nominal size) with provision for locking arragnement and shock observor fixed with by mechanical means lugs and curing complete including applying a coat of approved steel primer after pretreatment of the surface as specified within all leads and lifts as per the direction of Engineer-in-Charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing angle iron door, window, clerestory window frame manufactured from steel angle iron section of 50x50x6mm (fifty millimetre into fifty millimetre into six millimetre) and M.S. flat of 50x6mm (Fifty into six millimetre) including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angles 50x5mm (fifty millimetre into five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but thinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock as specified and applying a coat of approved steel primer after preteatment of the surface as dirceted by engineer-in-charge within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing ridges or hips 60 cm. (sixty centimetre) overall with 0.60mm (zero decimal six millimetre) thick prepainted steel sheets in roofing having proper gola shape with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 micron over 5 micron primer coating and back coat of polyster of 5 micron over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I. limpet and bitumen washers complete with all accessories as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two coats (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than white as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two coat (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter With white readymixed paint within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

20mm (twenty millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (one cement isto six sand)as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Distempering two coats with oil bound washable distemper of Asian/Nerolac approved brand and manufacture and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and including preparing the surface even and sand papered smooth as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Finishing walls with water proof exterior grade emulsion of approved design exterior of apex of Asian paint or its equivalent on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 250 x 16 mm (two hundred fifty into sixteen millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing under layer for plinth protection of 75 mm (seventy five millimetre) thick (unconsolidated) bed of dry brick / stone agreegate 40 mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing plinth protection 50 mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement isto three sand isto six graded stone agreegate 20 mm(twenty millimetre) nominal size) within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15 X 23 cm (fifteen into twenty three centimetre) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement mortar 1:3 (one cement isto three sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one cement isto five sand isto ten graded stone agreegate 40 mm (foty millimetre) nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one cement isto two sand isto four graded stone agreegate 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 12.5mm (twelve point five millimetre) thick gypsum partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately) within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 6 mm (six millimetre) thick Bison board/cement bonded partical board celing of approved quality with butt jointing and nail ( fram work measured and paid for separately).The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fittings (Earth work in trenches to be measured and paid for separately) 15 mm (fifteen millimetre) nominal bore including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked including fixing with approved adhesive 150 mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive 150 mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China wash down water closet (European type W.C. pan) Cera/Hindware make with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand). Seat and cover to be measured and paid for separately. Ordinary closet.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 5.00 ltr. capacity PTMT coloured/ white automatic flushing cistern with a pair of PVC / C.I. brakcets complete with fitting including P.V.C. syphonic apparatus, mosquito proof lid PVC union and coupling for connection with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing & Fixing white plastic seat and cover plastic seat (Solid/Hollow type) and cover for wash down water closet with CP Brass hinges and rubber buffers as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing wash basin No. 10001/ Cera/Hindware make including cutting holes and making good the same including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for wash basin complete recessed at the back for the reception of pipes and fittings.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass waste of 32mm (thirty two millimetre) dia size for sink or wash basin.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 600mm X 20mm (six hundred millimetre into twenty millimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass angle valve 15mm (fifteen millimetre) dia of Jal make as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass pillar tap with capstan head 15mm (fifteen millimetre) dia of Jal make as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass bib tap with capstan head 15 mm (fifteen millimetre) dia of Jal make with capaston head as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC connection with brass union 45cm. (forty five centimetre) Long and 15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing brass full way valve with wheel 15mm (fifteen millimetre) nominal bore.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC 110x90mm (one hundred ten into ninety millimetre) dia floor trap ISI marked of self design Supreme or equivelent including carriage of material within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and placing in position 500 litres net capacity PVC water storage tank of ISI 12701 marked G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

VINAY THAKUR

ROHIT KASHYAP

Tahir Malik Allied Services