Development/Upgradation of JDA Birpur Housing Colony Samba ( Balance Work) by way of electrical works

Amount

Part-A

SITC 400 KVA 11/0.433KV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Copper wound), and with LV Cable Box having detachable Aluminium Gland plate Including foundation for transformer

SITC Gapless Surge Arrestor,9 kV,10 kA/LA with polymer housing. Stn. Type

SITC 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

SITC11 kV Horn Gap Fuse Set 3 Phase 200A

SITC 240mm (2Ckt)/400mm (2Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

SITC 9 Mtr. Long ST Pole SP33)

SITC 11kV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, Creepage distance 320mm

SITC GI Channel/Angle/Flat of sizes including clamps for LA set/G.O set/Horn Gap

SITC Galvanized Nuts and Bolts.

Earthing of substation-Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, Gl nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

SITC 11kV Polymeric composite Pin Insulator 12KV, SkN, Lightening Impulse 75KV Positive and 80kV Negative, Creepage distance 320mm

SITC LT Distribution Box for 400/630 kVA DTR with MCCB for Incomer & SFU's for Outgoing Circuits

SITC Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut- bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia Gl stranded wire complete

SITC Wedge Connectors/ PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

Cement bottoming 1:2:4 mix as per REC standards Scum /pole

Painting of poles Red Oxide

Painting of poles Aluminium Paint

Sundry items like Aluminium lugs, jumper, bindingd type

Part-B

9 Mtr. Long Pole(PCC WL-300Kg,

70 mm² AB (HT) Cable (3x70+ 1x50 mm²) XLPE(11 kV, 3C + Earth)

Heat Shrinkable Outdoor Cable Termination Kit

Suspension/Tension Clamp with eye hook

Galvanized Nuts and Bolts.

Danger Plates

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or Gl Rod 20mm 2.5 mtr long through GI Strip.

Cement bottoming 1:2:4 mix as per REC standards. 45cum/pole

Stone Pad (300 mm x 300 mm x 75 mm)

Mid Span Straight Through Jointing Kit for 11 KV ABC

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn- buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia Gl stranded wire complete

Part-C

S.I.T.C of 11 mtr. High mass Lights on street Tubular Pole along with ring and 150 watt 4 Nos LED Light at the top of ring and Electrical Panel For Control ON and OFF of Lights with Pre Set timing (i.e. digital timer) auto ON and OFF of light with automatic Voltage Stabilizer Copper wound Single Phase Contactor S.P.N 32 Amp. 4 No. MCB 15Amp digital Voltmeter as required Cement bottoming of Pole and Panel in the ratio of 1:2:4 Concrete. The Panel must be out door type powder coated VERMIN Proof with external locking System. Providing and Laying of maintenance free Earthing chemical type Earthing Including Excavation of earth with base filling of same with good earth Installasion of 3 m + 4.2 Dia stainless Steel Pipe with copper rode and Filling of chemical Compound.

S.I.T.C of LED Street Light 45 watt with G.I Pipe Bracket on Pcc Pole including all accessories complete Job.

Part-D

9 Mtr. Long Pole ST-410 SP33)

GI Channel/Angle Iron including clamps

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

50 mm² ACSR Conductor

PG Clamps for 50 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip. (for 2 No ST poles and 1 No GO Switch)

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards .5cum /pole

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nutbolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Heat Shrinkable Outdoor Cable Termination Kit

S.I.T.C of Solar Photo Voltic (SPV) module Luminous storage battery Control electronic inter connecting wire CKt. Module to be mounted on G.I Pole 4 mtr. Long above the ground including Hardware Inbuilt battery with 12 watt. LED Light battery tube used to be installed on pole 63 mm dia embedded in the ground with cement concrete 1:2:4 ratio in the ground .

SITC11 kV Horn Gap Fuse Set 3 Phase 200A

M/s F M Infrastructure Builders Private Limited

COUNTRY CONSTRUCTION