Construction of 20,000 MTs cap. Godowns (except roofing), CC road, Office block, weighbridge cabin, pit etc. including E.I work on Sugarfed Land at Palwal.

Amount

Providing & laying concertina coil of galvanised iron on b/wall Y shape with angles complete as per DNIT

P/F CP brass bib cock 15mm dia Jaguar make model No. 39307 complete as per DNIT

P/F CP brass angular stop cock 15mm dia Jaguar make model No. 39053 complete as per DNIT

Earth work non plastic or tibba sand under floors taken form outside of campus area with all lead and lift including loading, unloading, laid in 15 cm layer including ramming, watering, consolidating compaction and compensation of earth etc. complete in all respect as per the direction or engineer in charge. This includes construction of embankment and subgrade for road & parking area compacted to meet requirement of table 300-2 of MORTH specification clause No. 305. The finished road surface will be as per X-section approved by Engineer-in-charge with respect to GTS. Further it shall be ensured that atleast 300 mm of subgrade shall be constructed at each location. Wherever any cutting of existing subgrade is required on this account excavation as well as handling and disposal of earthwork to accommodate minimum 300mm thick subgrade shall be carried out by the agency at his own cost. Nothing extra will be paid on this account complete as per DNIT.

WBM 3” thick compacted using 53 to 22.4mm stone metal laid in one layer complete in all respects as per PWD specification complete as per DNIT.

WBM 6” thick compacted using 63 to 45mm and 53 to 22.4mm stone metal laid in two layer complete in all respects as per PWD specification complete as per DNIT.

P/F khaprail on tapered surface of roofing in cement sand mortar 20 mm thick 1:3 complete as per DNIT

Supply of steel gates 6’X8’ size as per design & drawing of the Corporation complete as per DNIT.

Fixing of steel gates in gate size 6’X8’opening including cost of cement concrete 1:1½:3 complete as per DNIT.

Providing and fixing marble stone strips 13to 17mm x50mm in flooring derrived rate as per DSR-2018

Supply & fixing welded mesh/monkey gates as per drawing and design of the Corporation complete as per DNIT.

Providing and laying PVC socket 100mm dia for rain water pipe of ISI make complete as per DNIT.

Providing and fixing finishing of surface using mechanical floater/ dic complete as per DNIT

P/L Dewatering system of C.C by vacuum vibrator surface trowel fix in complete complete as per DNIT.

P/F galvalume/Zinclume steel sheet verandah roofing 0.50mm thick (Total thickness) (only ±0.02 mm tolerance allowed) with tensile strength 550mpa, with coating mass @ 150gm/Sqm, of approved blue colour (RAL-5012) fixed self screw-sloping roof without curvature of TATA BlueScope , JSW Steel Ltd. , Dongbu Steel Co. ltd(Korea) & Bhushan power and steel Ltd. coating of 55% aluminium, 43.5% Zinc and 1.5% silicon as per IS code- 15961, 15965 or other relevent ASTM code and all other relevant Indian codes as per specification, drawing and design of the Corporation complete as per DNIT.

P/F NO smoking Board 2'*1' ON ACP sheet with vinyl pasting on it Fixed with Rawl plugs at site complete as per DNIT.

Godown Nos Board size 4' * 2' made up of 3mm ACP sheet with Vinyl printing complete as per DNIT.

Speed breaker size 500*375*53mm conc. Filling and Epoxy with 6 pins for fixing in concrete complete as per DNIT.

Flex Board with 1" sq pipe flex digital printing on 13 oz material size 72' * 3' wall mounted complete as per DNIT.

Boring 10" dia bore with machine 250' deep bore including cost of diesel, labour & rent of machine cartage etc, compute in all respects complete as per DNIT.

Cost of 225mm dia PVC socket heavy, ISI make complete as per DNIT.

Cost of solution & copper rivet complete as per DNIT.

Supply of tee 9" dia ISI make complete as per DNIT.

Supply of elbow 9" dia ISI make complete as per DNIT.

Preparation of filter including cost of filter Jali and soot dhage etc complete as per DNIT.

Supply of PVC reducer ISI make 9"x5" complete as per DNIT.

Preparing of cavity 40'-0" deep including rent of generator set. Motor 10 HP, cost of diesel & labour etc complete as per DNIT.

Supplying of 9" dia PVC pipes ISI brand 6 kg/square cm, 53 kg weight /20',282' pipe used including vat and cartage etc complete as per DNIT

Supply of end cap 9" dia ISI make complete as per DNIT

Providing and laying coarse aggregate 63mm size average complete as per DNIT.

Providing and laying coarse sand over stone granule complete as per DNIT.

Providing and laying coarse sand over stone granule complete as per DNIT.

Flex Board on 1" Sq pipe office board 30' * 3'with flex digital printing on 13 oz material wall mounted complete as per DNIT.

Flex Board with 1" sq pipe flex digital printing on 13 oz material wall mounted 8' * 4' complete as per DNIT.

Providing Executive table 6'x3' as per drawing and design of corporation. as per DNIT

Providing Office table 5'x2.5'as per drawing and design of corporation complete as per DNIT

Providing Executive Chair for Manager as per drawing and design of corporation complete as per DNIT

Providing office chair for staff as per drawing and design of corporation complete as per DNIT.

Providing visitor's chair as per drawing and design of corporation complete as per DNIT

Providing big steel Almirah as per drawing and design of corporation complete as per DNIT

Providing computer table 4'x2' as per drawing and design of corporation complete as per DNIT

Providing Computer operator's chair as per drawing and design of corporation complete as per DNIT

Providing three seater for class IV as per drawing and design of corporation complete as per DNIT

Providing Inverter 800W approved make Excide battery complete as per DNIT

P/F Ms Square Pipe 40x40 mm frame for signage Board complete as per DNIT.

(ii) Extra for tinted glass complete as per DNIT.

Supply and Fixing of Street Light 100 watt Crompton Make. (Havells/Crompton/Philips) complete as per DNIT

P/F of LED Bulb 15W complete as per DNIT (Havells and Philips, Syska)

P/F of LED tube light fitting 40 w 1X4’ with tube 40w(Havells/Philips complete as per DNIT)

S/E of ceiling fan 48” double ball bearing make (Havells,Fusion,Model/Areole new complete as per DNIT

S/E of exhaust fan 12” Fresh Air Heavy Duty (Havells,Crompton/Bajaj) complete as per DNIT

3- Pin Top-15 Amp (Anchor/SSK Make) complete as per DNIT

Supply & Installation of Microtek 1600 VA Sinewave Inverter+ 150 AH Double tall tubular Battery Combo

Supplying, laying & testing Cable- CAT 6 UTP 23AWG Solid complete as per DNIT

Supplying, laying & testing I/O- Jack Cat 6 Keystone UTP - White Item no. NKJ-C6WHI1B21 complete as per DNIT

Supplying , laying & testing Faceplate - Face Plate - Single Item no.NFP-0WHI11 complete as per DNIT

Supplying, laying & testing SMB- Gang Box for single, Dual Face Plate Item No. NBB-011 complete as per DNIT

Supplying, laying & testing of TP- Link 8-port 100 Mbps Desktop switch, SF1008D Dlink make complete as per DNIT

Supply and Fixing Prestige make PIC 20.0 Induction Cooktop 1200 watt.

Supply and Fixing OSHAM Make large electric Hot-case/Food warmer.

Supply and Fixing Haier Make 195 ltr 4 star Direct-cool single door Refrigerator

Bidder Name

Amount

MSLR Private Limited(GSTN-06AALCM8561E1ZD)

M/s KHATANA GROUP OF CONSTRUCTIONS(GSTN-NA)

M/S DEV PARYAG BUILTECH PVT. LTD.(GSTN-NA)

M/S DEV PARYAG BUILTECH PVT. LTD.

MSLR Private Limited

M/s KHATANA GROUP OF CONSTRUCTIONS

MSLR Private Limited