Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹33.8 L+₹59,627.10 (1.80%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹34.1 L+₹96,968.14 (2.92%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹34.8 L+₹1.6 L (4.80%)Rejected-AOC | L4 | Rejected-AOC Rejected |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
17 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (N) Mamun
Garrison Engineer (N) Mamun PIN-145001
Annual Comprehensive maintenance to certain buildings in Shivalik Enclave under AGE BR II at Mamun
2022_MES_558720_1
GE(N)/M-39/2022-23
Open Tender
Civil Works
Item Rate
120 days
Garrison Engineer (N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer (N) Mamun
₹70,000
Yes
20 Dec 2022
19 Oct 2022
19 Nov 2022
19 Oct 2022
17 Nov 2022
3 Nov 2022
Amount
Taking down cement plaster on brick walls or stone walls any description etc including raking out joingts, hacking for key, scrubbing down with water etc, rubbsih off the premises complete all as specified and directed.
M&L for Rendering 10mm thick on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement complete all as specified and directed.
M&L for 15mm thick cement plaster in CM 1:4 on brick masonary or other than fair faces of brick work, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5mm thick cement plaster in CM 1:3 on concrete surface of ceiling, chajja etc finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Three coats of white wash on newly plastered surface of ceiling including preparation of surfaces complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over one coat of chalk whitening complete all as specified and directed.
M&L for Two coats of oil bound distemper over a coat of chalk whitening on newly plastered surface of walls including preparation of surfaces complete all as specified and directed.
Taking down chowkhats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
All as per Srl Item No 8 but exceeding 1.5 Sqm and n.exc 4 Sqm .
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and removal complete all as specified and directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x 60 mm for doors/ windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
All as per item 11 but size 105x60 mm.
M&L for PCC (1:3:6) type C-0 using 12.50 mm graded crushed stone aggregate as in back filling of chowkhat all as specified and directed .
S&F 2nd class factory made hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated factory made shutters complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F Solid PVC Door Frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
S&F Mild steel barrel tower bolts stove enameled black with bright bolts of length 150mm, ISI Marked complete all as specified and directed.
S&F continuos (piano) hinges, mild steel, bright finish or elcetrogalvanised size of flap 30 mm complete all as specified and directed.
S&F 100mm hasp and staples, safety type of alum anodised complete all as specified and directed.
S&F Mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.
S&F Mild steel sliding door bolts (ISI Marked) 250mm long, stove enameled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on sliding and two on staple plate complete all as specified and directed.
S&F 150 mm MS helical door spring for door closer, complete all as specified and directed.
M&L for Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a shop coat of primer complete all as specified and directed.
M&L for preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a shop coat of primer complete all as specified and directed..
M&L for Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed ot welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F I frame work , including other fittings ,hinges ,handles tarred hold fasts PCC blocks including two coats of synthetic enamel paint over a coat of primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.
M&L for Eco 4000 Series Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.60 mm. Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm, and Section for Fixed Glass Bead should be of 12mm x 12mm. Frame and Shutter Frame Sections should be cut to length and metre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter. Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay. Window Frame should be fixed to brick/concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frames. :Glass shutter & Fixed Glass portions should be provided with a glass of 5 MM Plain Float Glass. Windows should be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws Mesh Shutter should be provided with a Stainless Steel 32 gauge Fly mesh of 304 grades with 144 holes per square Inch complete all as specified and directed. Note: Qoated rate includes all glass and wire mesh, nothing extra shall be admissible on this account.
Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads, rubbish of the premises completef all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane completef all as specified and directed.
S&F frosted glass pin head type 3 mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each pane completef all as specified and directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples completef all as specified and directed.
Dismantling floor, hearth or wall tilling and terrazo topping including cement mortar bedding ( but not backing) removing serviceable tiles to stores and rubish off the premises completef all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick bedding layer of mortar in CM 1:4 complete all as specified and directed .
M&L for vitrified tiles 8-10 mm thick ( Square or rectangular) polished, double charged as in flooring, area of each tile not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed .
All as per item 36 but vitrified tiles 8-10 mm thick ( Square or rectangular) polished, double charged, area of each tile not exceeding 0.36 sqm in daddo, skirting complete all as specified and directed .
All as per item 37 but non skid ceramic coloured tiles 7 to 8 mm thick area of each tile not exceeding 0.36 sqm.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed .
All as per item 37 but for bore of pipe 20mm
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed .
Fixing only the 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc all as specified.
All as per item 42 but 20mm bore tubes
All as per item 43 but 20mm bore tubes
S&F in repair Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed (minimum weight 20mm -210 gms) fixed in reapirs complete all as specified and directed.
S&F in repair Bib taps cast copper alloy chromium plated, fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair angle valve / stop valve cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore dia.
All as per item 48 above but concealed type angle valve / stop valve cast for 15mm bore dia.
S&F in repair 20mm bore dia size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repairs Vitreous china wash basin, white flat back, size 550x400 mm including waste pipe, brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia waste pipe complete all as specified and directed.
S&F in repair pillar tap 15 mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
M&L for Brass CP suitable for centre hole basis mixer for mixing hot & cold water screwed down for 15mm bore dia of pipe & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair PVC waste pipe 32 mm dia for wash hand basin and urinal complete all as specified and directed.
S&F in repair PVC connection 15 mm size with PTMT nuts or length 450 mm complete all as specified and directed.
S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.
S&F Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastec seat and cover ( As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level), removal of demolished material to a distance exc 100 but not exc 200 meter complete all as specified and directed.
M&L for 75 mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.
M&L for Marble work 14mm to 16mm thick (table rubbed and polished) in cooking plateform, window cill, steps etc in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green/ Black Marble Bhaislana Zebra over 15mm thick screed bed in CM 1:6 including dismantling of marble stone slab with bedding layer of mortar complete all as specified and directed.
Dismantling water tank of capacity exceeding 250 litres but not exceeding 500 litres and removing complete all as specified and directed.
All as per item 62 but capacity 500 litres but not exceeding 1000 litres
M&L for two layered, ISI marked Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including all accessories, 20mm bore Ball brass valves, high pressure with polythene float and flynut complete, screwed down for iron pipe fixed complete all as specified and directed.
All as per item 64 but capacity 1000 litres
S&F in repair 20mm bore dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 ( using 12.50 mm graded crushed stone aggregate) as in padding on roof , surface finished even and smooth without using extra cement complete all as specified and directed.
M & L for cement concrete (1:2:4) type B0 ( using 12.50 mm graded crushed stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, chajjas and roof projection etc railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and directed.
M & L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using liquid WPC as per manufacturer's instructions or @ 0.200 ltr in 50 Kg of cement complete all as specified and directed. Note: (WPC shall be measured and paid for separetaly)
M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet walls, (to be executed through approved applicator of the membrane manufacturer) with following specification complete all as specified and directed :- (a) Cleaning existing surface properly, applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface, Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. (b) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
All as per item 71 above but over existing accessible roof except to provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm mentioned above
S&F Cast iron waste and vent pipes sand cast 100mm bore in any length with or without ears with cement joints fixed to walls with all fittings including taking down the unservicable pipe with fitting complete all as specified and directed.
S&F Cast iron waste and vent pipes sand cast 75mm dia bore in any length with or without ears with cement joints fixed to walls with all fittings including taking down the unservicable pipe with fitting complete all as specified and directed.
S&F CI branch piece single of 100mm bore or with parallel branches fixed in repair complete all as specified and directed.
S&F CI branch pipece single of 75mm bore or with parallel branches fixed in repair complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, removal of demolished material to a distance exc 100 but not exc 200 meter complete all as specified and directed
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed
M&L for reinforced cement concrete M-25 as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves including necessary formwork and the like complete all as specified and directed. Note: Design mix shall be provided by Engineer in Charge without any extra cost.
M&L Granite ( including demolition of old stone) work 15-16mm thick (table rubbed and polished) in steps, jambs, pillars, steps, window cills, cooking plateform and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of granite over 10 mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers , PVC waste pipe fixed in repair including waste coupling & waste pipe ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Taking down shutters of any description n exc 1 Sqm each complete all as specified and directed.
S&F in repair vitreous china, squatting from Pan 'Orissa' pattern 'white' size 580x440mm with integral footrest including provision of lean concrete bedding, connection to drain out pipe and to flush pipe, anti syphonage pipe etc complete including making good to floor where required complete all as specified and directed.
M&L for 2nd class hard ( wood wrought all sides ) Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours articles n exc 200 Cu.cm each complete all as specified and directed.
S&F in repair towel rail of 20 mm dia CP brass 600 mm long complete all as specified and directed.
S&F glass shelf 600 mm long 150 to 200 mm in width of PTMT with guard rails etc fixed with and including chromium plated brass screws and wooden and plastic cleats/rawl plug complete all as specified and directed.
S&F in repair shower with arm 125mm size suitable for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs complete all as specified and directed.
S&F in repair stainless steel kitchen plate rack of size 1200x900 mm (as per sample) of approved make fixed with stainless steel screws complete all as specified and directed.
Dismantling brick tile or terracing tiles single layer on roof complete, removal of rubbish complete all as specified and directed.
M&L for brick tiles laid over 15mm thick cement mortar in CM 1:4, joints grouted and flush pointed in CM(1:3) mixed withcrude oil with 5 % by wt. of cement complete all as specified and directed.
All as per item 91 but except brick tiles.
Taking down eaves gutters and rain water pipes 100 mm bore (any size or pattern), including all fitting, head, shoes, bend, swan-nacks etc, including cleaning or refixing or removal to store complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints, in any length fixed to walls complete all as specified and directed.
S&F PVC (SWR) bend any radius 110mm dia bore complete all as specified and directed.
S&F in repair Curtain rod of 20 mm dia, PVC coated MS with bracket, fienials, fancy type, fixed in position complete all as specified and directed.
S&F factory made 18mm thick WPC (wood particle composite) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600kg /Cum bent 90° including 100% termite/water proof, fire rertardent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard, Cabinet etc complete all as specified and directed.
All as per Srl item No 97 but both side without printed white board complete all as specified and directed.
S&F factory made 5mm thick WPC board one side prelam sheet for kitchen cabinet/cupboard of density 600 kg /Cum complete all as specified and directed.
S& F 150 mm size stainless steel brignt finish handle (as per sample), fixed with Nut and bolts complete all as specified and directed.
S&F Telescopic type Side channel of drawer of standard size including roller for moving drawer made out of mild steel electro galvanised ( soft close ball bearing runners) with width of flap 30mm, 60mm long complete all as specified and directed.
S&F stainless steel plain basket of size 17''x20''x6'' (as per sample), complete all as specified and directed.
S&F Stainless steel partition of size 17''x20''x6'' (as per sample), complete all as specified and directed.
S&F Stainless steel cutlery of size 17''x20''x6'' (as per sample), complete all as specified and directed.
S&F Stainless steel cup & soucer of size 17''x20''x4'' (as per sample), complete all as specified and directed.
S&F Stainless steel plate basket of size 17''x20''x6'' (as per sample), complete all as specified and directed.
S&F Stainless steel auto, zero crank hinges, fancy type with concealed pattern fitted to shutters complete all as specified and directed.
S&F Magnetic catcher for shutter (as per sample), fitted with suitable screws complete all as specified and directed.
Deduct: Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 74000.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
Alishan Builders
RAJBEER ENGINEERS
M/s Rajeev Vashist
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .