Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.4 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹13.5 L+₹94,457.50 (7.52%)Rejected-Finance | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹28,000
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
8687REPAIR TO CERTAIN BLDG AND PERIODICAL SERVICES AT 2 DC AREA PRASAD ENCLAVE AND SUBROTO ENCLAVE OF PERMANENT AND TEMP BUILDING UNDER AGE B R WEST OF GE M AF JALAHALLI BANGALORE
2022_MES_544744_1
8687/E8
Open Tender
Civil Works
Item Rate
333 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT PUBLIC FUND ACCOUNT
₹28,000
21 Oct 2022
11 Aug 2022
9 Sept 2022
11 Aug 2022
7 Sept 2022
25 Aug 2022
11 Aug 2022 - 18 Aug 2022
Amount
Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc and including removal of debries to out of MD land .
Demolition of brick/block work built in cement mortar or cement lime mortar and archor pillars etc but excluding ashlar facings dressed stone work and pre cast concrete articles and including removal of debries to out of MD land ..
Material and labour for PCC block masonry with solid blocks 1:3:6 type C1 using 20mm graded stone aggregate exc 10 cm in width and setting in mortar 1:6 complete.
Material and labour 10mm thick rendering in CM (1:6) on brick or concrete wall surface finished even & fair without using extra cement as in Wall.
Material and labour for 5mm thick rendering in CM (1:3) on brick or concrete surface on ceiling, finished even & fair without using extra cement.
Material and labour for three coats of white washing on ceiling including preparation of new plastered surface.
Material and labour for two coats of distembering on new plastered surface including preparation of new surface.
Demolition of Cement concrete (unreinforced) in ground floor and pavings not exc. 15 cm thickness (below or above GL).
Material and labour for 75 mm thick PCC 1:3:6 type C-2(using 40 mm graded mechanically crushed stone aggregate )as in subbase , paving and plinth protection finished even and smooth without using extra cement.
Material and labour for 40 mm thick PCC 1:2:4 type B-1(using 20 mm graded mechanically crushed stone aggregate )as in flooring finished even and smooth using extra cement.
Material and labour for 100 mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate) in paving, path complete all as specified and directed by Engr in Charge.
Demolition of reinforced cement conc of any description and in any position not otherwise specifically provided and including removal of debries to out of MD land ..
Material and labour for Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl form work.
Material and labour for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Material and labour for Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Taking down Shutters of any description n exc 1 sqm each and refixing same opening.
Taking down shutters of any description exc. 1 Sqm and n. exc 2 sqm and refixing same opening.
Taking down shutters of any description exc. 1 Sqm and n. exc 2 sqm
Taking down chowkhats or frames with shutters area exc. 1.5 Sqm and n.exc 4 sqm each and removing from the site
Taking down chowkhats or frames with shutters area n exc. 1.5 Sqm each and removing from the site
Material and labour for 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
Supply and fixing for 35 mm thick 2nd class HW factory made panelled shutters with panel of 12 mm thick reneered commercial plywood kilnseasoned chemically treated with 15 x 6 mm twedging all around the panels.
Supply and fixing for Glazed and skeleton shuttrs of 2nd class hard wood 30 mm thick shutters, open rebated and prepared (receive glass, gauze etc (without sash bars) edges of framing plane, chamfered or rounded, fitted with cut and miltered beeds for securing glass etc, size of members of shutters as specified in SSR Part I Section 8 Clause 8.20 (a) supplied and fitted to chowkhats.
Supply and fix mild steel hold fast confirming to Fe- 290 grase E-165.
Supply and fixing Factory made PVC choawkats or frames of size 50x 47mm with wall thickness made out of extruded 5 mm rigid PVC foam sheet mitered at corner and jointed with 2 Nos of 150mm long brackets of 15mm x MS square tube the vertical door prattles to be reinforced with 19 x 19 mm MS square tube of 19 gauge EPDM rubber gasket door frame to be fixed to wall using MS screws of 65/100mm size complete as per manufacture’s specification
Supply and fixing Factory mode 30 mm thick PVC paneled door shutter, manufactured by M/S rajshree or equivalent ,made from MS tube of 19 gauge x 19 mm x 19mm for styles and 15mm x for top & bottom rails, covered with heat molded PVC channel of 5mm thick sheet and 30x 50mm wide to from styles and 5mm thick x 75 mm wide PVC sheet for top rail and lock rail on either side and 5mm thick x200mm wide crass PVC sheet as gap insert for top rail and bottom rail paneling of 5mm thick PVC sheet fitted with MS frames welded/sealed to styles and rails with PVC sheet beading either side jointed together
Supply and fixing MS butt hinges medium weight cold rolled 100 mm size
Supply and fixing for 75mm long butt hinge.
S& F Alu anoldised handle 150 mm long.
S& F Alu anoldised handle 125 mm long.
Supply and fixing Alu anoldised barrel tower bolt 200 mm long.
Supply and fixing Alu anoldised barrel tower bolt 125 mm long.
Supply and fixing 300 mm (length of bolt) mild steel sliding door bolt (bolt type) above enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.
Supply and fixing Galvanised SS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanized wire staple and including fixing with beads supplied with joinery when fixed in repair incl MS Flat 15 x 3 mm thick with hole to receive wire mesh incl nut bolt
Material and labour two coats of synthitic enamel paint over a priming coat of pink primer incl preparation untreated surfaces of wood or wood based material exc 10 cm width or girth
Shutters of any description n exc 1 sqm each Resecuring or easing & adjusting, without taking down
All as per item No 36 above but exc 1 sqm and n exc 2 sqm each
Supply and fixing in rep 300mm, ordinary rat tail rod / helical pattern springs including roller and roller plate complete to wooden/steel choukhat or frame with screw/welding complete.
Supply and fixing in rep125 mm long Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed
Supply and fixing in rep 150 mmlong Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed
Supply and fixing in rep 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
Supply and fixing in repairs SS wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm complete.
Hacking out old broken glass pane any thickness any size from wooden/steel window frames
Supply and fixing for sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane
Supply and fixing in repairs plastic water closet seat cover, black/white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.
Supply and fixing in repairs Aluminium (extruded section ) body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.
Dismantling wall and ceiling boards any description, any thickness, including cover fillets and frames
Material and labour for anodised aluminium powder coated snap grid frame work size 605 x 605 mm for false ceiling including hangers 6 mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long and 6 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws fixed in ceiling flat or sloping. complete all as specified.all as specified.
Supply and fixing for Gypsum Board 12mm thick of size 600x600mm as in False Ceiling fixed on existing GI Snap Grid Frame Work with Steel Screws, complete all as specified and as directed.
Demolition and bracking up drain pipes 100 mm dia (salt glazed ware, AC or PVC, reinforced concrete) set in cement mortar incl bend and dimension piece etc. Complete and including removal of debries to out of MD land ..
All as per item No 51 but 75 mmdia of pipes.
Supply and fixing 110mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified.
Supply and fixing 75mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified.
Supply and fixing in repairs for PVC (SWR) bend 110 mm dia
Supply and fixing in repairs for PVC (SWR) bend 75 mm dia
Taking down and re-fixing the same Alumuinium window/ ventilator shutters, (each shutter area n.exc 2 sqm) after carrying out repairs by changing parts as required including removing the existing beading and fixing new rubber beading of suitable size with adhesive, complete all as directed by Engineer in Charge .
Taking down and re-fixing the same existing Aluminium door (each shutter area n. exc 4sqm) after carrying out repairs by changing parts as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling complete all as required and as directed by Engineer in Charge
Dismantling floor hearth or wall tiling including cement mortar bedding but incl screed bed and plaster and including removal of debries to out of MD land ..
Material and labour for non skid tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding .11 sqm but not exc. 0.18 sqm in floor etc. set and jointed in neat cement sullery out pointed in white cement to Match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes
All as per item No 60 but vertical surfaces incl 10 mm thick cement plaster in cm 1:4
Material and labour for non skid tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exc. 0.11 sqm in floor etc. set and jointed in neat cement sullery out pointed in white cement to Match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes
Material and labour for glazed ceramic designer coloured tiles of size 300 X 200 X 7 mm thick as in vertical surface such as skirting / dado, set, jointed in neat cement slurry and pointed in white cement using pigment to match color of tiles incl 10 mm thick plaster in CM 1:4 complete all as specified & directed
Material and labour for Vitrified ceramic tiles 10mm thick dark shade (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes
All all as per item No 64 above but vertical surfaces incl 10 mm thick cement plaster in cm 1:4
Supply and fixing for Anodised Powder Coated (minimum thickness of Powder Coating is 50 micron) Aluminium Frame for Doors, Windows, Ventilators with one or more Rebates including Jointing Cleat for fixing, incl taking down etc.,complete all as specified and as directed.
Supply and fixing for Anodised Powder Coated (minimum thickness of Powder Coating is 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
Material and labour for machine cut cudappa stone slab 20-25 mm thick in perairs over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match to shade of slab including rubbing and polishing and 15 mm thick screed in cement motar 1:4 complete all as specified complete incl dismantling.
Supply and fixing for Cement concrete chequered pre polished any coloured tiles 30cm x 30xm x20mm to 25 mm thick, machine pressed; set, jointed and pointed in net coloured pigment in floors,incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes.
Supply and fixing in repairs Stainless Steel Curtain Rod 20mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and as directed.
Supply and fixing in repairs for 100 mm Cast iron (malleable or mild steel) handles, cast type, stove enamelled black
Taking up or down steel tubing and connector 15 mm bore in new or old position (wall ceiling floor etc)
Taking up or down steel tubing and connector 20 mm bore in new or old position (wall ceiling floor etc)
Re-fixing only steel water tubing 15mm bore.
Re-fixing only steel water tubing 20mm bore.
Supply and fixing GI tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors.
Supply and fixing GI tubing 20 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors.
Supply and fixing in repair 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms))
Supply and fixing in rep 15mm bore stop value of PTMT of any colour screwed for iron pipe comp.
Supply and fixing in rep 15mm bore stop valves cast copper alloy fancy type chromium plate with long shank & cup (concealed type).
Supply and fixing in repairs PVC connections 45 cm long incl 15 mm bore fly nuts on both ends complete
Supply and fixing in repairs Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms)
Supply and fixing 5 mm thick black/Plain Tinted glass with rubber gasket in square, complete all as specified and as directed.
Material and labour for 12 mm thick pre laminated particle boards interior grade both sides laminated, Medium density, complete all as specified and as directed.
Supply and fixing in repairs high/low level cistern with brackets flush pipe etc complete and supply and fixing PVC low level cistern syphonic action type including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for EWC & indian type WC.
Supply and fixing in repairs 75 mm CI floor trap with CP grating incl jointing to waste pipe incl fixed in cement conc type B1 1:2:4
Supply and fixing sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, incl taking down complete.
Supply and fixing in repair viterious china white wash hand basin flat back white in colour ISI marked of size 550 mm x 400 mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brakets 2 Nos embedded in CM 1:4 type B-1 size 30 xm x 20 cm x 20 cm complete.
Supply and fixing in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc incl provisioning of lime concretes
Supply and fixing in repair vitreous china wash down water closet, padestal pattern, white in colour incl white seat cover ISI marked 'P' or 'S' trap, fixing bolt and jointing.
Supply and fixing in rep for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) Self-closing taps, cast copper alloy, chromium plated, screwed for iron pipe and fixed waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms)
Supply and fixing in repair PTMT shower rose 75 mm dia .
Supply and fixing in rep 150mm PTMT grating openable with or wihout hole for waste pipe incl fixing with white cement
Supply and fixing in repairs Health faucet CP for iron pipes 15 mm bore with all accessories complete.
Supply and fixing 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling water tanks and removing to store .
Supply and fixing 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling water tanks and removing to store .
Material and labour for taking down of existing sunken slab treatment from the sunken portion and removing of existing filling of sunken, cleaning the surfaces washing down with water and rubbish off the primises, cleaning and filling cracks with sealing compound, brushing neat cement [email protected]/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) (using 12.5mm graded stone aggregate) on sunken slab portion including filling of brick bats and finishing the top surfaces even and smooth without using extra cement . (b) Material and labour for two coat of acrylic cementitious water proofing coating (Dr FIXIT pidfin 2K manufactured by M/S Pidilite industries Ltd or equivalent) and followed by a overlay protective screed 15mm thick CM(1:3) alongwith liquid water proofing compound approved make on top surfaces of sunken slab after prepration as mentioned above method of application for acrylic cementitious water proofing coating and applying APP based polymeric membrane minimum weighing 4kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application is followed as per manufacturers instruction complete all as specified and directed.
Material and labour for preparation of old decorated wall surfaces and applying one coat of white wash all as specified.
All as per item No 99 here-in-before but on ceiling
Material and labour for washing, rubbing down and stopping of distempered surfaces of walls and applying one coat of distemper oil emulsion all as specified
Material and labour for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of cement base paint all as specified
Material and labour for preparation of old painted wall surfaces and applying one coat weather proof paint all as specified and directed
Material and labour for preparing old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed
All as per item No 104 hereinbefore but on steel surfaces.
Supply and fixing Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed Both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing in rep 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete.
Supply and fixing in repairs for 8 feet 4 pipes pulley operatoed cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes).
Supply and fixing in repair waste coupling 32mm dia of PTMT (half or full thread) minimum weight 45 gram
Supply and fixing in repairs PVC waste pipe 32mm bore for WHB/sink and all as specified and directed.
Dismantling of AC or corugated, semi corugated,etc. Sheet roof coverings
Supply and fixing 6 mm thick asbestos cement, corugated or semi corugated sheets in roofs, walls etc. fixed with L type or J type or cank hook bolts.
Supply and fixing Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L type or J type or crank hook bolts.
Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles
Material and labour for roof tiles Mangalore pattern inter locking at side joints laid dry all as specified
All as per Ser item No 117 above but except tiles
Supply and fixing for aluminium drapery rod outer dia 25mm with powder coated paint thickness ce welded MS pipe with corrugated PVC extrusion having plastic rings made of ABS plastic with outer dia 56-58 mm & inner dia 40-42mm . Brackets shall be at galvanised steel 1.6mm thick complete all as specified and directed.
Vivek Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .