Supplying and Erecting of 16 Mtrs High Mast Light at 13th ward Ambethkar Nagar East Side in Pattiveeranpatti Town Panchayat

Earth work excavation in all soils and sub soils except hard rock requiring blasting with intial lead and lift including re-filling the sides of foundation and depositing the surplus earthWithin the site area as directed by departmental officers etc., complete asper standard specification. as per SS 20 B TNDSS NO: 23 & 24 VI (s2), VII 9,10

Plain Cement concrete Using 1:4:8 mix using 40mm ISS gauge HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V, VI (S5A) VII

Supplying and errecting centering to sides and soffits including supports and strutting using 90cm x 60cm and B.G 10 stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over (silver oak joists) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all material to site etc., complete complying with standard specification. TNDSS NO: 20 & 85 . ( For Coloumn)

Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications .TNBP No:30

Brick Work in CM 1:5 (One part of cement & five parts of Fine aggregates) mix using Best quality II Class Bricks of size 9 ” x 4 3/8 ” x 2 3/4 ” including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications– TNBP No:31

Plastering with CM 1:5 (One part of cement & five parts of Fine aggregates) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications – TNBP No:56&57

Paving the floor with first quality anti skid ceramic tiles of size 305 x 305x 6mm tk for flooring and set in Cement Mortar 1:3 -20mm thick and pointing with white cement added with Suitable Colour Pigments and curing etc., complete.including cost and conveyance of all materials and all labour charges etc.complete as per Standard specification .

Daddoing with first quality colour glazed tiles of 300 mm x 200 mm x 6mm size of approved make and quality and colour set in Cement Mortar 1:2 and pointing with white cement added with Suitable Colour Pigments and curing etc., complete.including cost and conveyance of all materials and all labour charges etc.complete as per Standard specification .

Supplying, fabricating and fixing in position of mild steel Design Grill, including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials,Conveyence and all labour charges for fixing in position etc., complete as per standard specifications .

Painting two coats with ready mixed Plastic Exterior Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification. TNBP No:66-A

Painting two coats with ready mixed enamel paint of'approved quality and colour over a Existing priming coat For New Iron Grill works, including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification. TNBP No:66-A

Supply, Delivery,Erection and Commissioning of 16mtr Height GI Octogonal Light Pole as per dimension - Top dia 70mm, Bottom dia 140mm, section-1 (Section Length-10000m) thick 3mm. Baseplate 250mmX250mmx16mm with 4Nos of M24 dia bolt(4Nos) with safety Ladder PCD 250mm with suitable RC works ,with 32AMps 2 Pole MCB with MCB DB Box and Door Arrangements at the bottom of the pole and Round ring arm at the top of the pole suitable for fixing of Flood light luminaries of 8 Nos of 150W LED flood lumiaries complete set with cast aluminium housing and anodized reflector complete with IP65 protection glass with necessary wire connection complete set as per standard specification. 7/20 CTS copper wiring from light pole to service box for power automatic On/Off Timer switch box with 24x7 hrs Programmable Digital Timer Clock, 40 Amps, 4 pole contractor with 220 Volt Coil 64 Amps Miniature, Circuit Breaker, 16 Amps Neutral link fully wired with fibre glass wire 40 Amps double pole ISOLATOR main switch, 63 Amps fuse carrier, Fully wired on a wooden board in 1 Zinc coated box with lock and key arrangements and Necessary clamps and angles with bolts and nuts etc complete.Cost Excluding Foundation works (SOR PWD-2024-25 New Item No.M2138 ,page No.219)

Supply , Fixing of 1/2 HP Motor with Gear arrangements with Necessary wire connection for lifting (Up and Down movement) of High mast Light assemble using iron rope arrangemnts etc., complete.

Supply and Laying of 2x6sq.mm PVC LTUG Aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refitting the earth to make good (SD 175) SOR / PWD -Electrical Data 2024-25)

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete (SD 131) SOR/PWD-Electrical Data 2024-25

G.UDHAYAKUMAR (BID ID -1371295)