Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC | L1 | Accepted-AOC Awarded Contract being lowest as per NIT | |
| 2 | L2₹35.0 L+₹4.0 L (12.9%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 bidder |
Tender Value
₹35.6 L
EMD Value
₹71,220
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS C/O 56 APO PIN-913133
PROVN OF 01 X GD ROOM FOR H SECT AT BB CANTT, SRINAGAR, UNDER GE 864 EWS (JOB NO- W/LBCW-10/BB CANTT/2023-24)
2024_MES_659719_1
CWEK-34/864 EWS/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 864 EWS
Class D and Category a i
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹71,220
HQ 133 WORKS ENGRS
5 Oct 2024
14 Jun 2024
12 Sept 2024
14 Jun 2024
4 Sept 2024
18 Jul 2024
14 Jun 2024 - 21 Jun 2024
24 Jun 2024
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out soft/loose soil including clearing away all grass, vegitation, saplings, bushes, wood under growth and disposal of surplus excavated soil and all grass, vegitation, bushes etc as directed, complete all as specified and as directed.
Excavation in trenches (Manual), not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation of pipe line, cable trenches, for pole or for manholes etc not exceeding 10 sqm area on plan and getting out in soft/loose soil complete all as specified and as directed.
-Ditto-' all as per item No 2 above but depth exc 1.5m but not exc 3 m complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation of pipe line, cable trenches, for pole or for manholes etc not exceeding 10 sqm area on plan and getting out in hard/ dense soil complete all as specified and as directed by Engineer-in-charge.
Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation of pipe line, cable trenches, for pole or for manholes etc not exceeding 10 sqm area on plan and getting out in any type of soil complete all as specified and as directed.
M & L for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregates as in foundations, filling and mass concrete complete all as specified. (Note :- Volume of pole / strut / stays embedded in concrete shall be deducted for the purpose of payment)
M&L for PCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for RCC (Design Mix) M-25 crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
M&L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of Brick walls or concrete surfaces, including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, finishing the surface even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. Note:- WPC shall be measured and paid separately.
M&L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of Brick walls or concrete surfaces complete all as specified and as directed by the Engineer-in-Charge.
M&L for rendering 15mm thick plaster in cement mortar (1:6) on other than fair faces of Brick walls or concrete surfaces, finishing the surface even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new plastered external wall surface applying the following complete all as specified and as directed by Engineer-in-charge:- (a) Applying cement base paint two coats on wall surface.
Material and labour for Preparation of new plastered Internal wall surface by sand papering or by any other mean and after preparing the surfaces applying the following complete all as specified and as directed by Engineer-in-charge:- (a) Two coats of oil bound distemper (interior) of approved tint/shade (Company Depot Tinted) over a coat of chalk whiting on plastered surface by using paint brush / Roller.
M&L for Roof trusses (framed), trussed purlins, crane gantries, ralis and fastenings and heavy bracket framing (Beam, Tee, Angle channel or flat sections) of Fe-290 (Gde E-165) including distance pieces, cleats etc complete all as specified and as directed by the Engineer-in-Charge.
M&L for MS plates (plain) channels, Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed by the Engineer-in-Charge.
M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n exc 10cm long complete all as specified and as directed by the Engineer-in-Charge.
M&L for Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or rivated, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed by the Engineer-in-Charge.
M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge.
M&L for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, hip, valley gutter, drip and straight flasing fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge.
M&L for Gypsum false ceilling 6 to 8 mm thick with texture finished (595x595 size) with pre-coated standard GI angle, TEE and grid suspended with 4 mm dia GI wire at 600 mm c/c, angle of size 25x25x0.7 mm fixed around, main Tee of the section 38x25x0.7 mm with soffits clips, holding and level clips complete all as specified and as directed by the Engineer-in-Charge.
M&L for 75mm thick cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base of floor for leveling course, surface finished rough complete all as specified and as directed by Engineer-in-charge.
M&L for 40mm thick cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in sub base of floor for leveling course, surface finished rough complete all as specified and as directed by Engineer-in-charge.
M&L for RCC (Design Mix) M-25 crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for RCC (Design Mix) M-25 crushed stone aggregate as in Beams, Cantilevers, Lintels over 1.5m span complete all as specified and as directed.
M&L for Cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in surface channels and drains and surface finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.
M&L for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.
Use & waste of formwork to sides of foundations , footings, bases of columns, rafi and raft beame, sides and soffits (if any) of foundation and plinth beams, and similar work, Vertical or to batter finished even and fair finished surfaces of concrete, complete all as specified and as directed.
Use & waste of formwork to sides of square/rectangular pillars, posts, struts, piers, columns with even and fair finished surfaces of concrete, complete all as specified and as directed.
Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc also splays between floor and beams etc finished even and fair finished surfaces of concrete, complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
-Ditto-' all as per ser item No 34 above but 5mm dia and over upto 10mm dia complete all as specified and as directed by the Engineer-in-Charge.
M&L for Non Skid ceramic light coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed bed) in cement mortar (1:4) and finished the surface rough to receive the tile complete all as specified and directed by Engineer-in-Charge.
Supply and laying/fixing 60 mm thick (M35 grade) precast interlocking tile/paving block factory made chamfered edge (made by using PU moulds on Vibrating Table Machine) using cement concrete and pigment, prepolished & preglazed, with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc., laid in required colour & pattern, over and including 50mm thick compacted bed of fine sand cushining, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand and complete all as specified and as directed by Engineer-in-Charge.
M & L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.
S&F rebated on the solid or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.
S&F factory made plain framed panelled shutter 35mm thick made out of 2nd class hard wood with lock rail and panel (two panels) inserts of 9mm BWP commercial ply. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in- charge.
S&F factory made glazed and skeleton shutter 35mm thick made out of 2nd class hard wood kiln seasoned and chemically pressure treated, open rebated and prepared to receive glass, gauze, etc., but divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitred beads for securing glass, gauze etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); complete all as specified and as directed by Engineer-in- charge.
S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm wood grain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in- charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer-in- charge.
S&F Steel ventilators with top hung shutter including hinges, steel peg stay type, complete all as specified and as directed by Engineer-in-charge.
S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engineer-in-charge.
S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer complete all as specified and as directed by Engineer-in- charge.
M&L for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of pink primer complete all as specified and as directed by Engineer-in- charge.
S&F 100mm long mild steel butt hinges medium weight including steel screws for fixing complete all as specified and as directed by Engineer-in-charge.
S&F 75mm long mild steel butt hinges medium weight including steel screws for fixing complete all as specified and as directed by Engineer-in-charge.
S&F extruded aluminium handle fabricated type 150mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.
S&F extruded aluminium handle fabricated type 125mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.
S&F aluminium anodised barrel tower bolt of extruded section, 150mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.
S&F aluminium anodised barrel tower bolt of extruded section, 125mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.
S&F Aluminium, anodised, Hasp and staple, safety type, 75 mm including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-charge.
S&F aluminium anodised sliding door bolts 300mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in- charge.
S&F 3mm thick sheet glass ordinary quality in squares / retangular not exceeding 0.5sqm in each pane and fixed with oil putty or as directed complete all as specified & directed by Engineer-in- charge.
S&F 3mm thick figured glass pin head type in squares / retangular not exceeding 0.5sqm in each pane and fixed with oil putty or as directed complete all as specified & directed by Engineer-in- charge.
S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with screw in steel window (as shown in drawing) and with tinned tack nails and wooden bead in wooden shutter complete all as specified and as directed by Engineer-in- charge
M&L for Glazed ceramic coloured tiles light coloured of size 300mmx 450mm, 7mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:3) and finish the surface rough to receive the tile complete all as specified and as directed by Engineer-in-Charge.
S&F for 3 layer PPR concealed pipes 40 mm.outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threated polypropylene random fittings fixed to complete to walls ceiling or in floor etc complete all as specified and as directed by Engineer-in-Charge.
-Ditto-' all as per ser item No 61 above but 25mm size complete all as specified and as directed by Engineer-in-Charge.
-Ditto-' all as per ser item No 61 above but 20mm size complete all as specified and as directed by Engineer-in-Charge.
M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and as directed by Engineer-in-Charge.
S&F brass cromium plated shower rose with or without swivel joints of 125mm size with shower arm 195 mm long with bend of 45 degree with flange of any colour for fixing with 15mm dia pipe complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
S&F Brass chromium plated tubular towel rail 20mm dia including side brackets fixed to wall 60cm long complete all as specified and as directed by Engineer-in-charge.
S&F 15 mm bore chromium plated Angle stop valve with Wall Flange of cast copper alloy chromium plated, fancy type with round head/knob, half/full turn, screwed down high pressure screwed end for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
S&F 15 mm bore chromium plated Angle stop valve with Wall Flange of cast copper alloy chromium plated, fancy type with long shank and cup (concealed type) round head/knob, half/full turn, screwed down high pressure screwed end for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
S&F 20 mm bore chromium plated Angle stop valve with Wall Flange of cast copper alloy chromium plated, fancy type with long shank and cup (concealed type) round head/knob, half/full turn, screwed down high pressure screwed end for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
S&F 25 mm bore chromium plated Angle stop valve with Wall Flange of cast copper alloy chromium plated, fancy type with long shank and cup (concealed type) round head/knob, half/full turn, screwed down high pressure screwed end for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
S&F bib tap with Wall Flange cast copper alloy, chromium plated, fancy type, long nose body, with round head/knob, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
S&F chromium plated Soap Dish Holder with Round Flange, fixed on wall with chromium plated brass screws and PVC plug complete all as specified and as directed by Engineer-in-charge
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed along wall with chromium plated catcher brackets, brass screws and PVC plug complete all as directed by Engineer-in-charge.
S&F rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, three layered with closed top/lid), hoisted and fixed in position including making inlet and out let connection of any description and capicity with float valve and gate valve complete all as specified and as directed by Engineer-in-charge.
S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 25mm bore iron pipe (Min wt 25mm-455gms) complete all specified and as directed by Engineer-in-charge.
S&F gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.
S&F gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 25mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.
S&F PVC (SWR) floor trap 75mm dia with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed by Engineer-in- charge.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed in walls complete all as specified and as directed by Engineer-in- charge.
S&F 110mm bore PVC (SWR) bends plain (any radius) with oval access door complete all as specified and as directed by Engineer-in- charge.
S&F 75mm bore PVC (SWR) bends plain (any radius) with oval access door complete all as specified and as directed by Engineer-in- charge.
S&F 100mm bore PVC (SWR) branch pieces single T (equal or unequal), ordinary or inverted (Spigot or socket type) with oval access door complete all as specified and as directed by Engineer-in- charge.
S&F vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm white with integral foot rests, excluding flushing cistern, flush pipe above floor but including setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, including PVC flush pipe upto finished floor level, joints of flush pipe and trap make leakproof and testing upto entire satisfaction of Engineer-in-charge before filling concrete complete all as specified and as directed by Engineer-in- charge.
S&F PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connection to flush pipe of 32mm size and pattern with inlet ball valve float and handle complete all as specified and directed by Engineer-in-Charge.
S&F 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
S&F vitreous china wash basin, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe (flexible) 600mm long including bracket and cutting for and pinning in end of bracket or erecting with long screwed shanks & fly-nuts, flange end bedded in red lead cement complete all as specified and as directed by Engineer-in-Charge.
S&F Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed complete, all as specified & directed by Engineer-in-charge.
S&F Brass chromium plated 15mm Bore stop valve, cast copper alloy, long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete, all as specified & directed by Engineer-in-charge.
M&L for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement laid in alternate panels including making joints 12mm wide to the full depth of PCC at the rate of 3.00 mtr centre to centre and at every turning point, filling the Joints with and including bitumen and sand (1:3) by weight complete all as specified and as directed by the Engineer-in-Charge.
M&L for reinforced cement concrete RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
M&L for Form work to soffits of suspended slabs such as flat roof slabs, floor slabs, shelf slab, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished complete all as specified and as directed by Engineer-in- charge.
M&L for Block boards 18/19 mm thick grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screw to timber frame work complete all as specified and as directed by Engineer-in- charge.
S&F Reinforced concrete pipes of 200mm, class NP-2 laid and jointed complete with collars complete all as specified and as directed by Engineer-in- charge.
M&L for cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in bed of drain pipe of size 200mm bore (internal) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in- charge.
S&F GI tubing medium grade of size 25 mm bore, ISI marked, fixed along poles/walls or laid in trenches including fittings (elbow, tee, socket etc) complete all as specified and as directed by Engineer-in- charge. (Note:- Excavation and earthwork as required shall be measured and paid separately under respective item of Sch.)
-Ditto-' all as per ser item No 98.00 but 20mm size complete all as specified and as directed by Engineer-in- charge.
S&F GI tubing medium grade of size 15 mm bore, ISI marked, fixed along poles/walls including fittings (elbow, tee, socket etc) including fixing arrangement if pipe fixed along pole/wall complete all as specified and as directed.
S&F electric water heater (Geyser) storage type steel body of capacity 25 litre, BEE approved 5 Star rating, 230 V , single Phase, AC supply, inner tank made out of heavy duty copper sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostate, NRV, PVC connection 15mm bore 600mm long heavy duty with brass nuts both side suitable for hot and cold water, including electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable, 04 no Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- (i) GE Office name and Serial Number (issued by Engr-In-Charge) of geyser shall be written with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
M&L for concealed Point wiring for one light point/fan point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for mounting of switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size) concealed in wall, including inner and outer plates (cover plate white colour, any size as per requirements) suitable for fixing or mounting of switches/ socket / regulator etc, including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) including fixing of switch/socket/regulator for one light/fan point controlled by one way switch 5 Amp etc complete all as specified and as directed. (switch, socket, regulator shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). Note:- (i) Where ever it is not feasible to cable drawn through PVC conduit in roof slab (for ceiling fan point only) due to blocked, casing caping in lieu of pipe shall be provided by contractor without any extra cost, cost for the same shall deemed to be included in the quoted unit rate.
-Ditto-' all as per above Srl item No. 102 but for one three pin socket out let 5 Amps point controlled by one switch (on independent board and not below the any other switch board) complete all as specified and as directed by Engineer-in-charge. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).
-Ditto-' all as per ser item No 102 but for one 3 pin socket outlet 15 Amp point controlled by one switch with 2.5 Sqmm size including 2.5 Sqmm earthwire complete all as specified and as directed by Engineer-in-charge.
-Ditto-' all as per ser item No 102 but for one 3 pin socket outlet 15 Amp point controlled by one switch with 4 Sqmm size including 4 Sqmm earthwire complete all as specified and as directed by Engineer-in-charge.
S&F Single pole and neutral Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amps complete all as specified and as directed by Engineer-in-charge.
S&F Modular 6 Amps 230 Volts one way switch, 1 module complete all as specified and as directed by Engineer-in-charge.
S&F Modular socket 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-charge.
S&F Modular 16 Amps 230 Volts one way switch, 1 module complete all as specified and as directed by Engineer-in-charge.
S&F Modular socket 6/16 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-charge.
S&F Ceiling rose 3 phase/PVC/polycarbonate , isolated body complete all as specified and as directed by Engineer-in-charge.
S&F White cover plate with frame,1 module complete all as specified and as directed by Engineer-in-charge.
S&F White cover plate with frame,3 module complete all as specified and as directed by Engineer-in-charge.
S&F White cover plate with frame,4 module complete all as specified and as directed by Engineer-in-charge.
S&F White cover plate with frame,6 module complete all as specified and as directed by Engineer-in-charge.
S&F White cover plate with frame 8 moudule complete all as specified and as directed by Engineer-in-charge.
S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed by Engineer-in-charge.
S&F stepped type electronic fan regulator ,120W-2 module type as reqd complete all as specified and as directed by Engineer-in-charge.
M&L for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 6 Sqmm single core (02 run i.e 2 runs for main phase and neutral, 01 run for continues as earth wire) and turn of 6 sqmm FRLS PVC insulated unsheathed multistrand copper conductor cable drawn through and including PVC conduit 25mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed by Engineer-in-charge. Note :- Three runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.
S&F Light grade galvanised steel tubing of nominal dia 40 mm fittings laid in building, trench etc complete all as specified and as directed by Engineer-in-charge.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-charge.
S&F exhaust fan, Plastic body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed by Engineer-in-charge.
S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-charge.
S&F LED street light fitting 35Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-charge. Note: The quoted units rates shall be inclusive of sutable dia of GI Pipe 1.2m long bracket and clamp.
S&F Sheet metal enclosure TPN factory made IP 43 protection double door DB,s 415 V, Triple pole and neutral 6 way with 200 Amp rated bus bar, complete all as specified and as directed by Engineer-in-charge.
Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or 4 mm dia GI earth wirel , procteded by GI medium grade pipe 15 mm bore upto 7.5 mtr including chamber of concrete pit in pcc (1:2:4) type B1 using 20 mm graded stone agg. with 40 mm thick cover of RCC 1:2:4 with XPM (weight not less than 4Kg/SqM) and frame of cover 25 x 25 x 3 mm with lungs 2 Nos and with 6 mm dia MS bar grade to shape, GI light grade 20mm bore pipe for watering at bottom 1.75 Mtr long based on top edge of earth plate salt and charcoal filling test point made out of bornze/gun metal fixing arrangement, funnel, wire mess and earth work in hard/dense soil, returning filling and surplus soil to a distance not exceeding 50 Mtr all as per Plate N0 3 of SSR-2010 Part-I and connected to earthing test point all as specified or indicated including testing on complete all as specified and as directed by Engineer-in-charge. Note :- quoted rate of earthing shall be deemed to include cost of pipe,galvanised wire 4 mm dia and protection pipe 15 mm medium grade, GI light grade 20 mm bore watering pipe.
Earthing complete with galvanised iron or steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground earth pit not less than 1.5mts below ground level with top edge of earth plate not less than 1.5 mtr below ground level connected to galvanized earth strip 25x6 mm by means of nuts bolts thimnles check nuts & washers of galvanized iron or steel including PCC (concrete chamber) shall e PCC 1:3:6 type C-I using 20mm granded stone aggregate with fair finish internal surface of concrete chamber shall be given 15 mm thick plaster in CM 1:4 funnel with wire gauge of (0.68mm) 8 mesh per liner inch 80mm thick RCC pit cover 320mm x 320mm of RCC 1:2:4 type B-I using 20mm graded stone aggregate reinforced with XPM Jalli and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth watering pipe shall be 20mm bore medium grade GI Pipe and including all excavation and earth work and connecting the earthing to an earthing tesy point transformer neutral/body/LT panel etc. and testing on comlition complete all as specified and directed. Note :- quoted rate of earthing shall be deemed to include 7.5 mtr long galvanized wire 4 mm dia and protection pipe 15 mm medium grade, GI light grade 20 mm bore watering pipe complete all as specified and as directed by Engineer-in-charge.
S&F or fixing or laid in trenches / ducts / through pipes / in floors / under roads / under hard standing /along poles and testing, Cross linked Polyethylene (XLPE) LT Cable, XLPE Insulated, PVC inner sheathed, bedded, galvanised steel strip or wire armoured cable (heavy duty) 1100 volt grade with stranded aluminium conductor having cross sectional area 70 Sqmm 3.5 core conforming to IS-7098 (Part-I)-1988 with upto date amendments, any size complete all as specified and as directed by Engineer-in-charge. Note :- (i) Excavation, earth work, sand cushioning, brick protection, boring/cutting of road and pipe shall be measured & paid separately under appropriate item of this Schedule.)
-Ditto-' all as per ser item No 128.00 but cross sectional area 35 sqmm 3.5 core complete all as specified and as directed by Engineer-in-charge.
M&L for laying brick common burnt sub class B old size for protection of cable laid in trenches laid flat for underground cable complete all as specified and as directed by Engineer-in-charge.
M&L for sand cushioning, with dry and clean fine river sand (for under ground cable) 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and as directed by Engineer-in-charge. (Note:- Punned thickness shall be considered for payment purpose)
M/S MAHIR MUNEER (BID ID -3072941)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .