REPAIR MAINTENANCE OF CERTAIN SAILORS ACCOMMODATION FLOORING PLASTERING HARDSTANDING AND CERTAIN MISC WORK NEAR MES BLOCK UNDER AGE BR I OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water & removal of debrises outside MD land.

M&L rendering 20mm thick in CM (1:4) in two coats 10 mm thick backing coat and 10 mm thick setting coat, mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately)

M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engr -in- Charge.

M&L for preparing newly plastered surfaces of wall with wall care putty and applying two coats of oil emulsion distemper over a coat of primer all as specified and as directed

M&L preparation of new undecorated surfaces of walls,soffits & fascias of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.

M&L preparation of old undecorated surfaces of walls,soffits & fascias of chajjas etc and applying one coat of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.

M&L applying one coat of white wash on old plastered surfaces including preparation of surfaces as in ceiling all as specified.

M&L applying two coats of oil bound emulsion distemper on old decorated surfaces including preparation of surface complete all as specified.

Complete removal of existing treatment of wall by washing, rubbing down complete and applying two coats of oil bound emulsion distemper on old decorated surfaces including preparation of surface all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size 300x 300 mm area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding layer in CM 1:4 complete all as specified

S&F Glazed coloured ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick redering as backing layer in CM 1:4 complete all as specified.

Material & Labour for non skid coloured joint free ceramic tiles of size 400mmx400mmx7mm to 8mm thick in floors over and including 20mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In- Charge.

Material & Labour for glazed ceramic tiles in vertical surface 300x450x7 to 8mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In- Charge.

Taking down chawkhats or frame (w/o taking off shutters from the frames) n.exc 1.50 Sqm complete all as specified .

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete in 1:2:4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts

M & L MS works in holdfast made of fe -290 of length all as directed.

S & F Aluminium, anodised, barrel tower bolts of extruded section and fixed 100 mm length.

S & F Aluminium handles, cast type, anodised of length 100 mm

S & F in SS butt hinges 100 mm size

Taking down chawkhats or frame (w/o taking off shutters from the frames) exc 1.50 sqm but n.exc 4.00 Sqm each all as specified.

S &F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified.

S & F 30 MM thk Flush shutters, solid core construction, with particle board core complete all as specified.

S & F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm length.

S & F Aluminium handles, cast type, anodised of length 150 mm

S & F in SS butt hinges 150 mm size

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm

Demolition of Plain cement Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately)

M&L cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor 150mm thick all as specified and directed.

Supply only water proofing compound Fosroc Dr Fixit or equivalent

S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) and PVC (SWR) 'P' or 'S' trap including concrete including provision of cement concrete bedding all as specified and directed.

S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) all as specified and directed.

S & F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs

Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, finished even and smooth with using extra cement.

S & F in repairs Stainless sink coupling of external 110mm dia along with necessary fittings.

S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as directed and as specified

M&L applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified.

M&L preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces all as specified

Hacking out broken glass panes of any description from wooden frames fixed with beads.

S&F 4mm thick frosted sheet glass pin headed type ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame.

Resecuring or easing & adjusting of shutters, without taking down exc 1 sq. m and n exc 2 sq. m each

Resecuring or easing & adjusting shutters , without taking down n. exc 1 sq. m each

S&F 125 mm extruded aluminium handles, fabricated type anodised fixed in repairs.

S&F 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs.

All as per item No 48 above but 100 mm

S&F in repairs 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy.

S & F in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

S & F pvc connectors of 15 mm size with PTMT nuts of length 600 mm length

S & F in repairs PVC waste pipe of 32 mm dia 800 mm length

S & F in repairs CP grating of size 100 mm

M&L in repair aluminium powder coated drapery rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) in repairs complete

S&F aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and wall in repairs complete all as specified and directed.

S & F in repairs sinks with draining board made of stainless steel 1mm thk, kitchen with plugs, washers & wastes, incl fixing cantilever brackets & connecting union to pipe overall size 915mm X 460mm bowl size 410mmX 330mm X160mm all as specified and directed.

S & F 32 mm dia waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms)

S & F stainless steel plate rack 0.63mm thick stainless steel sheet overall size stainless steel plate rack 31"x30"x10" kitchen rack all as specified and directed.

Dismantling Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including sides moulding specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L brick work with subclass B brick (old size) straight or curved on plan exc. 6m mean radius , built in cement mortar 1:4 all as specified .

S&F in repair 20mm dia stop/gate valve copper alloy high pressure with crutch or butterly handle, screwed both ends for iron pipe or for unions.

S&F in repair 15 mm bore bib tap cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule,complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings or removal to store for 15 mm bore GI tubing.

S & F 15 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store with all fittings for 20 mm bore GI tubing.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

Dismantling wrough iron or mild steel work of any description not otherwise provided for embedded in PCC /Brick work all as specified and directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work all as specified.

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

M & L for providing and fixing 6mm thick non asbestors pre-painted ceiling to flat or curved surface over metal frame work and reinforced with GI wire mesh (fillets,metal frame work and GI wire mesh paid separately).

S & F anodised aluminium powder coated snap grid frame work including necessary connection with hangers for false ceiling and including GI wire mesh size 0.91 mm length as per required and fixed properly with frame and all as specified and directed.

Dismantling of Plain or corrugated/Steel chajja or AC sheet any Guage thickness including all fittings and removal from MD land complete all as complete all as directed by Engr In Charge. a) Rate Quoted shall be of Scaffolding upto 6th floor.

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F Framed brackets / purline of angles or tees or hollow circular pipe with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., confirming to Fe 290 Gde E-165.

M&L applying two coats of synthetic enamel paint over a coat red oxide on steel newly surfaces over 10cm width/girth incl preparation of surfaces.

S&F 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete all as specified & directed by Engineer-in-charge.

Cutting chases, pinning in and making good to facings of brick/concrete/stone walling where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified & directed by Engineer-in-charge.

M&L for filleting in any position and to any shape of section area n.exc 25 Sqcm in cement sand mortar 1:4 including all mitres, stops, etc.

Demolition of cement concrete un-reinforced not exc 15 cm thick of any description and at any position and removing the debris outside the MD land.

Dismanteling of paver blocks and concrete tiles any description any postion incliding removing from site complete

M & L hard core of broken stone or boulder of guage not exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick watered & rammed to a true surfaces complete all as specified.

M&L 75 mm thick PCC 1:3:6 type C-1 (20mm graded stone agg) as in sub base of flooring, and similar works finished rough to receive the tiles etc without using extra cement.

M&L for Sand filling under floors or in foundation including watering and consolidation etc complete.

M&L for 60 mm thick Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 , M-40 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using 50mm thick PCCB 1:2:4 B1 (20mm graded stone aggregate) slab flooring, bedded, and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 etc complete.

M&L coloured glazed cement concrete chequered tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete (Note : Cost for 20 mm thick cement screed is inclussive in the rate. No separate payment to be made.)

Excavation in trenches in hard / dense soil, n. exc. 1.5 m in depth and getting out all as specified.

Demolition and breaking up drain pipes (salt ware,AC, or reinforced concrete set in cement mortar of pipe 150 mm.

M & L Concrete bed to drain pipes including packing against the sides of pipes (after they are laid and tested for 150mm dia pipe) with cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate ) all as specified.

M & L Salt glazed stone ware drain pipes 150 mm dia confirming to IS grade 'A' laid in trenches and jointed as specified.

Returning , filing in, including spreading , levelling , watering and well ramming in layers n. exc. 25cm in hard / dense soil all as specified.

Removing excavated material from MoD land above the starting point.

Dismantling of RCC manhole cover of any description.

S & F RCC covers of any size 900 x 450 mm and thickness 75mm fixing in position all as specified and directed. MAKE: VIKRANT OR EQUIVALENT

Taking down shrubs / vegetation growth from crevices completely, upto 20 mtr height with necessary scaffolding and all safety equipements, spreading of chemical to burn the roots all as directed and specified including filling the crak the cement plaster in C M 1:3 making good surfaces complete all as specified.

DHARICHHAN ENTERPRISE

S S ENTERPRISES

SHREE JAGDISH FURNITURE CO.