Repair to Bridge over Local Nallah on Udayaguda to Mandidi road Span - 3 x 30.63 Mtr c.c_Road_ Renewal coat to both side Approach road and painting._At 0.650 Km

Road Work Clearing and grubbing road land including uprooting wild vegetations, grass, bushes, shurbs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used etc. complete including cost. , conveyance, royalty, Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam IRC Grade-III (53mm to 22.4mm) specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 404 of MoRD by manual means including all labour, T&P and cost, conveyance, royality, DMF (10% over Royality), EMF (5% over Royality), Addl Charges, Cess & taxes of all materials required for the work complete in all respect as per direction of the Engineer-in-Charge.

Providing & applying primer coat with Bitumen Emulsion (SS-1) using emulsion distributor @ 4 Kg per 10 Sqm on the prepared granular surface treated with primer and cleaned with mechnial broom as per technical specification Clause 503 of MoRD & as per direction of Engineer-in-Charge.

Providing & applying tack coat with Bitumen Emulsion (RS-1) using emulsion distributor @ 3 Kg per 10 Sqm on the prepared granular surface treated with primer and cleaned with mechnial broom as per technical specification Clause 503 of MoRD & as per direction of Engineer-in-Charge.

Providing & applying tack coat with Bitumen Emulsion (RS-1) using emulsion distributor @ 2 Kg per 10 Sqm on the bituminous surface and cleaned with mechnial broom as per technical specification Clause 503 of MoRD & as per direction of Engineer-in-Charge.

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of speficied grading premixed with bituminous binder of 60/70 penetration grade of bitumen , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for Road & Bridge works and all other T&P articles including cost, conveyance, royality, DMF (10% over Royality), EMF (5% over Royality), Addl Charges, Cess, taxes of chips and bitumen & other required materials etc. complete as per specification and direction of the Engineer in charge.

Painting two coats with plastic emulsion paint to concrete surface over a coat of water bound primer including cost of paint & primer sand papering polishing the surface with cost conveyance of all materials and labour with T&P required for the work with Cess etc complete as per the direction of the Engineer-in-Charge

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H specifications for Road and Bridge works (4th Revision) with cost of all labour, T&P and with cess, royality and as per direction of Engineer-in-charge.